- 25 Apr, 2005 37 commits
-
-
Michael Chan authored
This patch fixes a bug that causes tg3_has_work() to always return 1. rx work is determined by comparing tp->rx_rcb_ptr with the current hw producer index. The hw producer index is modulo the ring size, but tp- >rx_rcb_ptr is a free running counter that goes up beyond the ring size. After the ring wraps around once, tg3_has_work() will always return 1. The fix is to always do modulo arithmetic on tp->rx_rcb_ptr. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Noted by Al Viro. Signed-off-by: -
Patrick McHardy authored
In the event a raw socket is created for sending purposes only, the creator never bothers to check the socket's receive queue. But we continue to add skbs to its queue until it fills up. Unfortunately, if ip_conntrack is loaded on the box, each skb we add to the queue potentially holds a reference to a conntrack. If the user attempts to unload ip_conntrack, we will spin around forever since the queued skbs are pinned. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Yasuyuki KOZAKAI authored
Signed-off-by:
Yasuyuki KOZAKAI <yasuyuki.kozkaai@toshiba.co.jp> Signed-off-by:
-
Adrian Bunk authored
This patch makes some needlessly global code static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
3rd argument of sys_debug_setcontext() is also a userland pointer. Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Al Viro authored
void * __iomem replaced with intended void __iomem *. Signed-off-by:
-
Al Viro authored
replaced declaration of EA from u32 to unsigned long - this beast is used only to cast it to (userland) pointer and proper integer type for that is unsigned long. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
* ->io_base_virt in struct pci_controller is iomem pointer. Marked as such. Most of the places that used it are already annotated to expect iomem. * places that did gratitious (and wrong) casts a-la isa_io_base = (unsigned long)ioremap(...); hose->io_base_virt = (void *)isa_io_base; turned into hose->io_base_virt = ioremap(...); isa_io_base = (unsigned long)hose->io_base_virt; * pci_bus_io_base() annotated as returning iomem pointer. Signed-off-by:
-
Al Viro authored
sigcontext.regs is a userland pointer Signed-off-by:
-
-
David S. Miller authored
Kill build failures in the SMP+!PREEMPT case introduced by Al Viro's spinlock.h changes. Signed-off-by: -
Tom 'spot' Callaway authored
Bob Breuer wrote a patch to add dump_stack for sparc. Supposedly, this was applied, but it doesn't exist in 2.6.11. This is the same patch, rediffed against 2.6.11. Signed-off-by:
Tom 'spot' Callaway <tcallawa@redhat.com> Signed-off-by:
-
Tom 'spot' Callaway authored
Peter Jones uncovered this one while we were debugging the framebuffer issues. There are some references to -1 in the mxcc asm code, which should be 0xffffffff. This patch gets rid of the -1s. Signed-off-by:
-
Tom 'spot' Callaway authored
The sparc32 ksyms is missing a few more symbols, these are primarily related to SMP, and will be needed as SMP gets beaten back into functionality. Specifically, add __cpu_data (PER_CPU), cpu_online_map, and phys_cpu_present_map. This patch assumes that the earlier "linux-2.6.11-sparc-fixksyms.patch" is applied, otherwise, it will apply with fuzz. Signed-off-by:
-
Bob Breuer authored
This enables the sun linux logo to be selected on sparc32. Signed-off-by:
Bob Breuer <breuerr@mc.net> Signed-off-by:
-
Tom 'spot' Callaway authored
This patch adds some missing sparc32 ksyms that are needed. Specifically, ___rw_read_enter, ___rw_read_exit, ___rw_write_enter, and sys_close. Signed-off-by:
-
Tom 'spot' Callaway authored
Using the same logic as the other framebuffer fixes committed in 2.6.11, this is a set of fixes to make TCX functional on the console again. Adds the tcx_pan_display function, sets the all->info.var.{red,green,blue}.length values to 8, and runs fb_set_cmap. Also looks for the correct SUNW,tcx prom value. This patch just slipped through the cracks. Originally by: Georg Chini <georg.chini@triaton-webhosting.com> Signed-off-by: -
Tom 'spot' Callaway authored
This patch is incredibly trivial, but it does resolve some of the user confusion as to what "L1-A" actually is. Clarify printk message to refer to Stop-A (L1-A). Gentoo has a virtually identical patch in their kernel sources. Signed-off-by:
-
Tom 'spot' Callaway authored
Minor cleanups for sparc specific drivers (sunbmac, sunqe, sunlance, sunhme, esp) so that they have a full module version definition that is consistent with other upstream drivers. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Please apply, SCTP/DCCP needs this when INET_REFCNT_DEBUG is set. Signed-off-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Thomas Graf authored
Calculate hashtable size to fit into a page instead of a hardcoded 256 buckets hash table. Results in a 1024 buckets hashtable on most systems. Replace old naive extract-8-lsb-bits algorithm with a better algorithm xor'ing 3 or 4 bit fields at the size of the hashtable array index in order to improve distribution if the majority of the lower bits are unused while keeping zero collision behaviour for the most common use case. Thanks to Wang Jian <lark@linux.net.cn> for bringing this issue to attention and to Eran Mann <emann@mrv.com> for the initial idea for this new algorithm. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Herbert Xu authored
The SELinux hooks invoke ipv6_skip_exthdr() with an incorrect length final argument. However, the length argument turns out to be superfluous. I was just reading ipv6_skip_exthdr and it occured to me that we can get rid of len altogether. The only place where len is used is to check whether the skb has two bytes for ipv6_opt_hdr. This check is done by skb_header_pointer/skb_copy_bits anyway. Now it might appear that we've made the code slower by deferring the check to skb_copy_bits. However, this check should not trigger in the common case so this is OK. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ben Greear authored
Signed-off-by: -
Ben Greear authored
Signed-off-by: -
Jamal Hadi Salim authored
And provide an example simply action in order to demonstrate usage. Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Andrew Morton authored
From: Panagiotis Issaris <takis@lumumba.luc.ac.be> In the ENI155P device driver in six possible failure cases the requested irq is not being released. In three of the above possible failure cases additionally there seems to be a memory leak. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
David S. Miller authored
The problem is that when doing MTU discovery, the too-large segments in the write queue will be calculated as having a pcount of >1. When tcp_write_xmit() is trying to send, tcp_snd_test() fails the cwnd test when pcount > cwnd. The segments are eventually transmitted one at a time by keepalive, but this can take a long time. This patch checks if TSO is enabled when setting pcount. Signed-off-by:
John Heffner <jheffner@psc.edu> Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
chas williams authored
Signed-off-by:
Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by:
-
chas williams authored
Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Replacing the open coded equivalents and making ax25 look more like a linux network protocol, i.e. more similar to inet. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
The NAT changes in 2.6.11 changed the position where helpers are called and perform packet mangling. Before 2.6.11, a NAT helper was called before the packet was NATed and had its sequence number adjusted. Since 2.6.11, the helpers get packets with already adjusted sequence numbers. This breaks sequence number adjustment, adjust_tcp_sequence() needs the original sequence number to determine whether a packet was a retransmission and to store it for further corrections. It can't be reconstructed without more information than available, so this patch restores the old order by calling helpers from a new conntrack hook two priorities below ip_conntrack_confirm() and adjusting the sequence number from a new NAT hook one priority below ip_conntrack_confirm(). Tracked down by Phil Oester <kernel@linuxace.com> Signed-off-by:
-
- 24 Apr, 2005 3 commits
-
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
