- 26 Aug, 2006 3 commits
-
-
Andrew Vasquez authored
Software must explicitely re-enable extended firmware tracing after any ISP abort condition. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Original code attempts to retry PLOGIs to fcports that are FCP_TARGETs only. If the driver never performed a successful PLOGI/PRLI, the port-type would never be assigned, and the relogin logic would silently drop the request (and thus the port would not be recognized and registered). The fix is relatively straightforward, drop the FCP_TARGET-only check. Signed-off-by:
-
Douglas Gilbert authored
There's a problem where sg is executing a ->nopage operation on a compound page, it actually calls get_page() on the first page in the compound rather than the page which is being mapped. The fix is to select the correct page by indexing into the compound. Signed-off-by:
-
- 19 Aug, 2006 3 commits
-
-
James Smart authored
Change version number to 8.1.9 Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
-
James Smart authored
Stall error handler if attempting resets/aborts while an rport is blocked. This avoids device offline scenarios due to errors in the error handler. Background: Although the transport is using the scsi_timed_out functionality to restart the timeout if the rport is blocked, if the timeout has already fired before the block occurs, the eh handler still runs and can take the device offline. Ultimately, this window cannot be resolved without significant work in the error handler thread. Christoph noted the first level of these issues when he noted the poor error response handling by the error thread. We found, under heavy load and error testing, that time window from when the scsi_times_out() adds the io to the queue to when the scsi_error_handler gets around to servicing it, can be in the several seconds range. In most cases, these test conditions are highly unusual, but possible. As a result, we're stalling the error handler in this race window so that we can avoid the device_offline transitions. Signed-off-by:
-
James Smart authored
Misc Bug Fixes: - Cap MBX_DOWN_LINK command timeout to 60 seconds - Fix double free of ndlp object - Don't free mbox structures on error. The completion handlers expect to do so. - Clear host attention work items when going offline - Fixed discovery issues in multi-initiator environments. Signed-off-by:
-
- 06 Aug, 2006 34 commits
-
-
Michael Reed authored
This patch corrects a problem in mptfc which can result in targets being removed after executing an "lsiutil 99" reset of the fibre channel ports. The last rescan event was being processed before the setup reset work due to an inappropriate optimization in the event processing logic. Every rescan event is now queued for execution and the setup reset work now executes in the proper sequence. Signed-off-by:
Michael Reed <mdr@sgi.com> Acked-by:
Moore, Eric <Eric.Moore@lsil.com> Signed-off-by:
-
Michael Reed authored
Based upon a conversation I had with LSI's fibre channel firmware guru, this patch adds another condition under which the driver waits for the firmware link initialization / target discovery to complete. Signed-off-by:
-
Christoph Hellwig authored
The hptiop just got merged with a horrible amount of really bad ioctl code that is against the standards for new scsi drivers. This patch backs it out (and fixes a small bug where scsi_add_host is called to early). We can re-add proper APIs once we agree on them. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
James Bottomley authored
Conflicts: arch/ia64/hp/sim/simscsi.c Stylistic differences in two separate fixes for buffer->request_buffer problem. Signed-off-by: -
Andreas Herrmann authored
New version number fo zfcp driver. Signed-off-by:
Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by:
-
Andreas Herrmann authored
Bug fixes for zfcp's erp: - trigger adapter reopen if do_QDIO fails - avoid erp deadlock if registration of scsi target or remote port hang - do not treat as error if exchange port data fails - decrease timeout for target reset and aborts - mark unit failed if slave_destroy is called Additionally some code cleanup was done: - made some functions void when retval is not of interest - shortened initialization of zfcp's host_template - corrected some comments Signed-off-by:
-
Volker Sameske authored
Improve request handling. Use hash table to manage request IDs. Signed-off-by:
Volker Sameske <sameske@de.ibm.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Vladislav Bolkhovitin authored
Currently it is impossible to reset provided by Qlogic QLA2xxx driver SCSI devices externally using corresponding sg devices, particularly via sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset() function checks if the input scsi_cmnd has its private data (CMD_SP()) attached. Then the found pointer isn't used anywhere inside of qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it doesn't have such private data. The attached patch removes check for non-NULL CMD_SP() from qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using corresponding sg devices. AV: change applies to bus/host reset handlers as well. Signed-off-by:
Vladislav Bolkhovitin <vst@vlnb.net> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Shyam Sundar authored
Signed-off-by:
-
James Smart authored
Change version number to 8.1.8 Signed-off-by:
-
James Smart authored
ID String and Message fixes - Fix switch symbolic name registration to match cross-OS values - Replace printk's with more standard lpfc_printf_log calls - Make all lpfc_printf_log message numbers unique Signed-off-by:
-
James Smart authored
Short bug fixes: - Fix iocbq list corruption due to missing list_del's in ct handling - Missing unlock in lpfc_sli_next_iotag() - Fix initialization of can_queue value - Differentiate sysfs mailbox errors with different codes. Signed-off-by:
-
James Smart authored
Fix race condition between lpfc_sli_issue_mbox and lpfc_online Signed-off-by:
-
James Smart authored
Fix failing firmware download due to mailbox delays needing to be longer. Signed-off-by:
-
James Smart authored
Signed-off-by:
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: ati_remote - use msec instead of jiffies Input: ati_remote - add missing input_sync() Input: ati_remote - relax permissions sysfs module parameters Input: ati_remote - make filter time a module parameter Input: atkbd - restore repeat rate when resuming Input: trackpoint - activate protocol when resuming Input: logips2pp - fix button mapping for MX300 Input: keyboard - change to use kzalloc Input: serio/gameport - check whether driver core calls succeeded Input: spaceball - make 4000FLX Lefty work Input: keyboard - simplify emulate_raw() implementation Input: keyboard - remove static variable and clean up initialization Input: hiddev - use standard list implementation Input: add missing handler->start() call Input: HID - fix potential out-of-bound array access Input: fix list iteration in input_release_device() Input: iforce - add Trust Force Feedback Race Master support Input: iforce - check array bounds before accessing elements Input: libps2 - warn instead of oopsing when passed bad arguments Input: fm801-gp - fix use after free ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] Don't reject O_RDWR at opening PCM OSS with read/write-only device [ALSA] snd-emu10k1: Implement support for Audigy 2 ZS [SB0353] [ALSA] add MAINTAINERS entry for snd-aoa [ALSA] aoa: platform function gpio: ignore errors from functions that don't exist [ALSA] make snd-powermac load even when it can't bind the device [ALSA] aoa: fix toonie codec [ALSA] aoa: feature gpio layer: fix IRQ access [ALSA] Conversions from kmalloc+memset to k(z|c)alloc [ALSA] snd-emu10k1: Fixes ALSA bug#2190
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [LAPB]: Fix windowsize check [TCP]: Fixes IW > 2 cases when TCP is application limited [PKT_SCHED] RED: Fix overflow in calculation of queue average [LLX]: SOCK_DGRAM interface fixes [PKT_SCHED]: Return ENOENT if qdisc module is unavailable [BRIDGE]: netlink status fix
-
David Woodhouse authored
While busy-waiting for completion, check the hardware after scheduling; don't schedule and then immediately check the _timeout_. If the yield() took a long time (as it does on my OLPC prototype board when it's busy), we'd report a timeout even though the hardware was now ready. This fixes it, and also switches the yield() for a cond_resched() because we don't actually want to be _that_ nice about it. I see nice tightly-packed SMBus transactions now, rather than waiting for milliseconds between successive phases. Actually, we shouldn't be busy-waiting here at all. We should be using interrupts. That's an exercise for another day though. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Cc: Christer Weinigel <wingel@nano-system.com> Cc: <Jordan.Crouse@amd.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Eric Sandeen authored
I saw an oops down this path when trying to create a new file on a UDF filesystem which was internally marked as readonly, but mounted rw: udf_create udf_new_inode new_inode alloc_inode udf_alloc_inode udf_new_block returns EIO due to readonlyness iput (on error) udf_put_inode udf_discard_prealloc udf_next_aext udf_current_aext udf_get_fileshortad OOPS the udf_discard_prealloc() path was examining uninitialized fields of the udf inode. udf_discard_prealloc() already has this code to short-circuit the discard path if no extents are preallocated: if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB || inode->i_size == UDF_I_LENEXTENTS(inode)) { return; } so if we initialize UDF_I_LENEXTENTS(inode) = 0 earlier in udf_new_inode, we won't try to free the (not) preallocated blocks, since this will match the i_size = 0 set when the inode was initialized. Signed-off-by:Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Thomas Gleixner authored
The recent fixups in futex.c need to be applied to futex_compat.c too. Fixes a hang reported by Olaf. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Olaf Hering <olh@suse.de> Signed-off-by:
-
matthieu castet authored
A patch in -mm kernel correct the parsing of "address resources" of pnpacpi. Before we assumed it was memory only, but it could be also IO. But this change show an hidden bug : some resources could be producer type that are not handled by pnp layer. So we should ignore the producer resources. This patch fixes bug 6292 (http://bugzilla.kernel.org/show_bug.cgi?id=6292). Some devices like PNP0A03 have 0xd00-0xffff and 0x0-0xcf7 as IO producer resources. Before correcting "address resources" parsing, it was seen as memory and was harmless, because nobody tried to reserve this memory range as it should be IO. With the correction it become IO resources, and make failed all others device that want to register IO in this range and use pnp layer (like a ISA sound card). The solution is to ignore producer resources Signed-off-by:
Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by:
Uwe Bugla <uwe.bugla@gmx.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: "Brown, Len" <len.brown@intel.com> Acked-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Chris Mason authored
reiserfs_write_full_page does zero bytes in the file past eof, but it may call get_block on those buffers as well. On machines where the page size is larger than the blocksize, this can result in mmaped files incorrectly growing up to a block boundary during writepage. The fix is to avoid calling get_block for any blocks that are entirely past eof Signed-off-by:
Chris Mason <mason@suse.com> Signed-off-by:
-
Chris Mason authored
The correct lock ordering is inode lock -> BKL Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch is for collision check enhancement for memory hot add. It's better to do resouce collision check before doing memory hot add, which will touch memory management structures. And add_section() should check section exists or not before calling sparse_add_one_section(). (sparse_add_one_section() will do another check anyway. but checking in memory_hotplug.c will be easy to understand.) Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: keith mannthey <kmannth@us.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
both of acpi_memory_enable_device() and acpi_memory_add_device() may evaluate _CRS method. We should avoid evaluate device's resource twice if we could get it successfully in past. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
add_memory() does all necessary check to avoid collision. then, acpi layer doesn't have to check region by itself. (*) pfn_valid() just returns page struct is valid or not. It returns 0 if a section has been already added even is ioresource is not added. ioresource collision check in mm/memory_hotplug.c can do more precise collistion check. added enabled bit check just for sanity check.. Signed-off-by: -
KAMEZAWA Hiroyuki authored
find_next_system_ram() is used to find available memory resource at onlining newly added memory. This patch fixes following problem. find_next_system_ram() cannot catch this case. Resource: (start)-------------(end) Section : (start)-------------(end) Signed-off-by:
-
KAMEZAWA Hiroyuki authored
find_next_system_ram() returns valid memory range which meets requested area, only used by memory-hot-add. This function always rewrite requested resource even if returned area is not fully fit in requested one. And sometimes the returnd resource is larger than requested area. This annoyes the caller. This patch changes the returned value to fit in requested area. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
ioresouce handling code in memory hotplug allows not-aligned memory hot add. But when memmap and other memory structures are initialized, parameters should be aligned. (if not aligned, initialization of mem_map will do wrong, it assumes parameters are aligned.) This patch fix it. And this patch allows ioresource collision check to handle -EEXIST. Signed-off-by:
-
Diego Calleja authored
In bugzilla #6941, Jens Kilian reported: "The function befs_utf2nls (in fs/befs/linuxvfs.c) writes a 0 byte past the end of a block of memory allocated via kmalloc(), leading to memory corruption. This happens only for filenames which are pure ASCII and a multiple of 4 bytes in length. [...] Without DEBUG_SLAB, this leads to further corruption and hard lockups; I believe this is the bug which has made kernels later than 2.6.8 unusable for me. (This must be due to changes in memory management, the bug has been in the BeFS driver since the time it was introduced (AFAICT).) Steps to reproduce: Create a directory (in BeOS, naturally :-) with files named, e.g., "1", "22", "333", "4444", ... Mount it in Linux and do an "ls" or "find"" This patch implements the suggested fix. Credits to Jens Kilian for debugging the problem and finding the right fix. Signed-off-by:
Diego Calleja <diegocg@gmail.com> Cc: Jens Kilian <jjk@acm.org> Cc: <stable@kernel.org> Signed-off-by:
-
Stefan Richter authored
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in scsi_mod for all Maxtor SBP-2 disks. https://bugzilla.novell.com/show_bug.cgi?id=183011 Maybe that should be done for all SBP-2 disks, but better be cautious. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@ubuntu.com> Signed-off-by:
-
