- 07 Mar, 2007 40 commits
-
-
Jonathan McDowell authored
On Fri, Oct 27, 2006 at 05:16:59PM +0100, Jonathan McDowell wrote: > However having prodded further I'm seeing incorrect key parsing with > the omap-keypad driver under both -rc2 and -rc3 (works fine in > 2.6.18-omap1). Numerous keys now returns strings of characters rather > than the single expected character. A few keys still work as expected > however. Before I dig in further is anyone else seeing anything similar? This appears to be due to the addition of keymapsize to the omap_kp_platform_data structure. The patch below fixes things up for the Delta; other boards appear to have already had this done. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
More GPIO/IRQ cleanup: - compile-time removal of much useless code * mpuio support on non-OMAP1. * 15xx/730/24xx gpio support on 1610 * 15xx/730/16xx gpio support on 24xx * etc - remove all BUG() calls, which are always bad news ... replaced some with normal fault reports for that call, others with WARN_ON(1). - small mpuio bugfix: add missing set_type() method Oh, and fix a minor merge issue: inode->u.generic_ip is now gone. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Minor GPIO cleanups: remove needless #include, and omap_gpio_init() should be __init, as well as all the board init code calling it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
Add palmte board config bits for TSC2102 controlled devices. This will enable touchscreen, audio and APM code to report battery level. If there are other boards at some point that use a TSC2102, similar code can be used. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vašut authored
Palmz71 specific things - board file. Signed-off-by: Marek Vašut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vašut authored
This patch enables some clock on omap310. Signed-off-by: Marek Vašut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
GPMC updates: - bugfixes: wrong/missing flags, omitted write, wrong test - don't map memory segments starting at zero - improve debug messaging - export gpmc_get_fclk_perio]d() since it's needed to calc timings - expect gpmc_cs_set_timings() caller to have initialized sync vs async Note that this API is glitchy; likely the best fix would be to add a member to "struct gpmc_timings" to hold GPMC_CONFIG1, since that holds one key aspect of the GPMC timings (the gpmc_fclk divisor, and sync vs. async == whether that divisor matters). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kyungmin Park authored
Add some OMAP 24xx pin mux declarations to support: - TUSB 6010 EVM (on H4) - All three full speed USB ports - GPIOs used with USB0 on Apollon and H4 For OMAP2, issue MUX_WARNINGS and debug messages correctly; and make the message look more like the OMAP1 message. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Remove some conflicting declarations in omap2/memory.c so that the file builds again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Add some GPIO debug support: /sys/kernel/debug/omap_gpio dumps the state of all GPIOs that have been claimed, including basic IRQ info if relevant. Tested on 24xx, 16xx. Includes minor bugfixes: recording IRQ trigger mode (this should probably be a genirq patch), adding missing space to non-wakeup warning Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kyungmin Park authored
In previous GPMC patch, there was a typo. Fix typo and add header files for set_irq_type() warnings. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jonathan McDowell authored
This adds support for the keypad on the top of the Amstrad Delta. It's just a standard omap-keypad so all we need to do is add the keypad layout and platform data to the board definition file. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Some GPIOs on OMAP2420 do not have wakeup capabilities. If these GPIOs are configured as IRQ sources, spurious interrupts will be generated each time the core domain enters retention. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
General update of the board file for Palm Tungsten E. Registers the platform devices contained in the PDA (ROM chip, keypad, infra-red) and updates the configuration for USB and MMC, whose config values were previously guessed in most cases due to lack of documentation (and now are confirmed by a number of users). Macros for GPIO pins are moved to a file in include/asm-arm/arch-omap. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
Add controller platform data Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Use virtual addresses directly instead of physical addresses to avoid having to recalculate the virtual address with every register access. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Enable serial idling and wakeup features Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Useful for debugging power management code. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Enable 24xx GPIO autoidling Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Add DMA IRQ sanity checks Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
The APLLs are most efficiently idled by hardware. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Place SMS and SDRC into smart idle mode Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Richard Woodruff authored
This adds the delayed application attribute to the dss2 clock. DSS2 can't select the 48MHz APLL with properly with out validating the configuration as trigged by this flag. Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dirk Behme authored
ARM: OMAP: Fix missing #include <linux/workqueue.h> in board-h2.c resulting in In file included from arch/arm/mach-omap1/board-h2.c:40: include/asm/arch/irda.h:27: error: field 'gpio_expa' has incomplete type Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Include missing header for do_div() Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dirk Behme authored
Fix warning: arch/arm/mach-omap1/clock.c: In function 'omap1_clk_enable_generic': arch/arm/mach-omap1/clock.c:499: warning: 'return' with no value, in function returning non-void Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
Fix the following compiler warning (only visible with CONFIG_OMAP_RESET_CLOCKS): arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused': arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in function returning void Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Linus Torvalds authored
.. hopefully most of the resume/suspend problems introduced by the timer and other changes are behind us. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix floppy build failure.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [DCCP]: Set RTO for newly created child socket [DCCP]: Correctly split CCID half connections [NET]: Fix compat_sock_common_getsockopt typo. [NET]: Revert incorrect accept queue backlog changes. [INET]: twcal_jiffie should be unsigned long, not int [GIANFAR]: Fix compile error in latest git [PPPOE]: Use ifindex instead of device pointer in key lookups. [NETFILTER]: ip6_route_me_harder should take into account mark [NETFILTER]: nfnetlink_log: fix reference counting [NETFILTER]: nfnetlink_log: fix module reference counting [NETFILTER]: nfnetlink_log: fix possible NULL pointer dereference [NETFILTER]: nfnetlink_log: fix NULL pointer dereference [NETFILTER]: nfnetlink_log: fix use after free [NETFILTER]: nfnetlink_log: fix reference leak [NETFILTER]: tcp conntrack: accept SYN|URG as valid [NETFILTER]: nf_conntrack/nf_nat: fix incorrect config ifdefs [NETFILTER]: conntrack: fix {nf,ip}_ct_iterate_cleanup endless loops
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] cio: Call cancel_halt_clear even when actl == 0. [S390] cio: Use path verification to check for path state. [S390] cio: Fix locking when calling notify function. [S390] Fixed handling of access register mode faults. [S390] dasd: Use default recovery for SNSS requests [S390] check_bugs() should be inline. [S390] tape: Compression overwrites crypto setting [S390] nss: disable kexec. [S390] reipl: move dump_prefix_page out of text section. [S390] smp: disable preemption in smp_call_function/smp_call_function_on [S390] kprobes breaks BUG_ON
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_pdc202xx_old: fix data corruption and other problems pata_legacy: fix io/irq mismatch ahci: RAID mode SATA patch for Intel ICH9M
-
Linus Torvalds authored
This reverts commit 39d61db0. The commit was buggy in multiple ways: - the conversion to ilog2() was incorrect to begin with - it tested the wrong #defines, so on all architectures but FRV you'd never see the bug except for constant arguments. - the new "get_order()" macro used its arguments multiple times, and didn't even parenthesize them properly - despite the comments, it was not true that you could use it for constant initializers, since not all architectures even use the generic page.h header file. All of the problems are individually fixable, but it all boils down to: better just revert it, and re-do it from scratch. Cc: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove un-used/un-referenced local_bh_count. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Use irq_handler_t for passing clock handler routine around. And use new rtc_time in place of hwclock_time. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
For the Freescale M5282 ColdFire, Port UA Pin Assignment Register should set to UART mode. Patch submitted by David Wu <davidwu@arcturusnetworks.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Fix work queue code to support new model. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
For the Freescale M5282 ColdFire, Port UA Pin Assignment Register should set to UART mode. Patch submitted by David Wu <davidwu@arcturusnetworks.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove regs arg from bad interrupt handler. Use irq_handler_t type for handler arg of local request_irq(). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Use irq_handler_t type for passing around timer interrupt routine in 368360 setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-