- 18 Jan, 2006 40 commits
-
-
Linus Torvalds authored
-
David S. Miller authored
Based upon a report and preliminary patch from Jim Gifford. Signed-off-by:David S. Miller <davem@davemloft.net>
-
Eddie C. Dost authored
From: Eddie C. Dost <ecd@brainaid.de> I have the following patch for serial console over the RSC (remote system controller) on my E250 machine. It basically adds support for input-device=rsc and output-device=rsc from OBP, and allows 115200,8,n,1,- serial mode setting. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
Jesse Brandeburg authored
Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
John Ronciak <john.ronciak@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Jesse Brandeburg authored
in attempting to not send the "prefetch" patch, we broke the receive code, this patch fixes that issue. Signed-off-by:
-
Jesse Brandeburg authored
Signed-off-by:
-
Jesse Brandeburg authored
Signed-off-by:
-
Jesse Brandeburg authored
Added e1000_mc_addr_list_update Added e1000_read_reg_io Added e1000_enable_pciex_master These are not static functions, that is why we have them declared in the header. Signed-off-by:
-
Jesse Brandeburg authored
These functions help restore the driver to active configuration when coming out of resume for power management. Signed-off-by:
-
Jesse Brandeburg authored
Align the prefetches to a dword to help speed them up. Recycle skb's and early replenish. Force memory writes to complete before fetching more descriptors. Signed-off-by:
-
Jesse Brandeburg authored
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by:
-
-
Linus Torvalds authored
-
Linus Torvalds authored
-
David Chinner authored
a page while we are still submitting other buffers on the same page for I/O. SGI-PV: 948197 SGI-Modid: xfs-linux-melb:xfs-kern:25004a Signed-off-by:
David Chinner <dgc@sgi.com> Signed-off-by:
Nathan Scott <nathans@sgi.com>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Bryan O'Sullivan authored
sparse can't parse a struct definition in include/asm-powerpc/lppaca.h, even though gcc can accept it. The form looks like this: struct __attribute__((whatever)) foo { }; An equivalent that both gcc and sparse can handle is struct foo { } __attribute__((whatever)); This is the only definition of this type in the tree, and fixing it is easier than fixing sparse. Signed-off-by:Bryan O'Sullivan <bos@serpentine.com> [ Side note: fixing sparse wouldn't be hard, but the "attribute at the end" version is the canonical one, and the one that makes sense. So let's just fix the kernel instead. Luc Van Oostenryck already sent out a sparse patch to the sparse mailing list in case anybody cares. -- Linus ] Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Hemminger authored
There are a couple of problems in the DMA setup code for skge. * In the 64 bit case, it doesn't set the consistent mask. * In the 32 bit case, the error check is backwards! It likely will only be visible as a bug on 64 bit platforms. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Somewhat cleaner in the resync as someone cleaned up the pio xfer users Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Jason Gaston authored
Signed-off-by:
Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by:
-
Alan Cox authored
sizeof() return is not an int, so use max_t to get the types right. Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by: -
Stephen Hemminger authored
Be more careful about transmit locking, this solves a possible race between tx_complete and transmit, that would cause a tx timeout. Signed-off-by:
-
Stephen Hemminger authored
Don't need to inline quite so many routines, let the compiler decide Signed-off-by:
-
Stephen Hemminger authored
Can use kzalloc here. Signed-off-by:
-
Stephen Hemminger authored
Make sure and rate limit all the error messages that might occur. If a problem occurs then a few messages are enough. Signed-off-by:
-
Stephen Hemminger authored
Small optimization, if dma addresses are 32 bits, then high bits are always zero. Signed-off-by:
Stephen Hemminger <shemminger@osdl.or> Signed-off-by:
-
Stephen Hemminger authored
Don't need to zero out the status ring entries after processing. Signed-off-by:
-
Stephen Hemminger authored
Be more careful about memory barriers. The only place we really need them is before and after updating the chip's ring interface. Signed-off-by:
-
Stephen Hemminger authored
Fix problems with Yukon FE rev 2 chipset. Don't cut and paste bugs in from sk98lin driver. Change how the ram buffer is divided up, and make the math clearer. Also, set the thresholds where rx takes precedence. The threshold values are just guesses at this point, it might be worth tuning them later. Signed-off-by:
-
Stephen Hemminger authored
Version update. Signed-off-by:
-
Stephen Hemminger authored
Need to call pci_set_consistent_dma_mask in the case of 64 bit DMA. Signed-off-by:
-
Stephen Hemminger authored
Need to make sure that sky2 receive buffers are 64 bit aligned. Also, don't need to start off with GFP_ATOMIC on initial setup. Signed-off-by:
-
Jesse Brandeburg authored
e100: e100 whitespace fixes These are whitespace only fixes. Signed-off-by:
-
Jesse Brandeburg authored
e100: Handle the return values from pci_* functions This is to resolve warnings during compile time. Signed-off-by:
-
Jesse Brandeburg authored
e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) Set the end of list bit to cause the hardware's transmit state machine to work correctly and not prevent management (BMC) traffic. Signed-off-by:
-
