- 05 Jan, 2006 11 commits
-
-
Deepak Saxena authored
The IXP4xx driver bails out on all A0 CPUs, but it should only do so on IXP42x as IXP46x has functioning HW. Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
-
-
-
Linus Torvalds authored
-
Linus Torvalds authored
-
-
-
-
Linus Torvalds authored
-
Linus Torvalds authored
In particular, allow over-large read- or write-requests to be downgraded to a more reasonable range, rather than considering them outright errors. We want to protect lower layers from (the sadly all too common) overflow conditions, but prefer to do so by chopping the requests up, rather than just refusing them outright. Cc: Peter Anvin <hpa@zytor.com> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
-
- 04 Jan, 2006 29 commits
-
-
Thomas Young authored
Vegas' slow start was only adding one MSS per RTT rather than one for every ack. Slow start behavior should now match Reno. Signed-off-by:
Thomas Young <tyo@ee.mu.oz.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kris Katterjohn authored
Signed-off-by:
Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
David Howells authored
This fixes the pragma packing in the ip2 driver by popping the previous setting rather than explicitly assuming that the correct setting is 4. This also gets around a compiler bug in the FRV compiler when building allmodconfig. Signed-Off-By:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Sam Bishop authored
Prevents a compiler warning and uses down_interruptible() instead of down() in process context. Signed-off-by:
Sam Bishop <sam@bishop.dhs.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Olav Kongas authored
Fix buffer size limiting. Signed-off-by:
Olav Kongas <ok@artecdesign.ee> Signed-off-by:
-
Pete Zaitcev authored
Fix usb_find_interface. You cannot case pointers to int and long on a big-endian 64-bitter without consequences. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
David Woodhouse authored
I looked at the userspace code which uses the LPIOC_GET_DEVICE_ID ioctl and I almost went blind. Let's export it in sysfs instead, and just as a string instead of with a big-endian length at the beginning of it. This also prints the message about finding the printer _after_ we know the minor device number it's going to have, rather than reporting all printers as 'usblp0'. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Pete Zaitcev authored
From: David Woodhouse <dwmw2> David has a G5 with a printer. I am quite surprised that nobody else noticed this before. Linus has a G5. Hackers hate printing in general, maybe. We do not use BKL anymore, because one of code paths had a sleeping call, so we had to use a semaphore. I am sure it's safe to use unlocked_ioctl. The new ioctls return long and retval is int. It looks completely fine to me. We never want these extra bits, and the sign extension ought to work right. Signed-off-by:
-
Nathan Lynch authored
Noticed that my zd1201 adapter isn't "seen" by hal and NetworkManager. The problem seems to be that unlike other network device drivers I checked, zd1201 does not do a SET_NETDEV_DEV(), which makes it so a "device" symlink is created under /sys/class/net/wlan0. With the following patch the device symlink shows up, and now I am happily using NetworkManager to control the adapter: $ ls -l /sys/class/net/wlan0 total 0 -r--r--r-- 1 root root 4096 Dec 18 13:42 address -r--r--r-- 1 root root 4096 Dec 18 13:42 addr_len -r--r--r-- 1 root root 4096 Dec 18 13:42 broadcast -r--r--r-- 1 root root 4096 Dec 18 13:42 carrier lrwxrwxrwx 1 root root 0 Dec 18 13:42 device -> ../../../devices/pci0001:10/0001:10:1b.1/usb4/4-1 -r--r--r-- 1 root root 4096 Dec 18 13:42 features Signed-off-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
-
Oliver Neukum authored
this introduces limits whose lack in the skeleton driver someone recently complained about. Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
Pete Zaitcev authored
Fedora users complain that passing "nousbstorage" to the installer causes the rest of the USB support to disappear. The installer uses kernel command line as a way to pass options through Syslinux. The problem stems from the use of strncmp() in obsolete_checksetup(). I used __module_param_call() instead of module_param because I wanted to preserve the old syntax in grub.conf, and it's the only macro which allows to remove the prefix. The fix is tested to accept the option "nousb" correctly now. Signed-off-by:
-
David Hollis authored
Attached patch adds device IDs for the Linksys USB200M Rev 2 device which uses the AX88772 chipset. Signed-off-by:
David Hollis <dhollis@davehollis.com> Signed-off-by:
-
Phil Dibowitz authored
Alan Stern pointed out there was an ordering issue in unusual_devs.h, and this patch fixes it. Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Daniel Marjamaki authored
Removed an unused variable Signed-off-by:
Daniel Marjamaki <daniel.marjamaki@comhem.se> Signed-off-by:
-
Pete Zaitcev authored
Rename misleading UB_MINORS_PER_MAJOR into UB_PARTS_PER_LUN. Signed-off-by:
-
Pete Zaitcev authored
Implement command retries and resets in ub. It is advantageous for users to know if their devices are getting bad. However, failing every I/O is not practical if you have a external USB enclosure with a hard drive. Signed-off-by:
-
Daniel Marjamäki authored
Removed unused variable Signed-off-by:
-
Jesper Juhl authored
Remove kmalloc() return value casts that we don't need from drivers/usb/* Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Ian Abbott authored
This patch adds vendor and product IDs to the ftdi_sio driver's device ID table for two devices from teratronik.de. The device IDs were submitted by O. Wölfelschneider of Teratronik Elektronische Systeme GmbH. The charset of the patch is latin-1, same as the original files. Please apply, thanks! (I've tried to avoid a clash with Andrew Morton's patch to add support for Posiflex PP-7700 printer to the same driver.) Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Pavel Fedin authored
This little patch adds recognition of Posiflex PP-7000 retail printer to ftdo_sio module. The printer uses FT232BM bridge programmed with custom VID/PID. The patch posted to lkml and sf.net was for 2.6.11.1 kernel, here is one reworked for 2.6.12. Signed-off-by:
-
Ville Syrjälä authored
Summary: Driver for ATI/Philips USB RF remotes This is a new input driver for ATI/Philips USB RF remotes (eg. ATI Remote Wonder II). Signed-off-by:
Ville Syrjl <syrjala@sci.fi> Signed-off-by:
-
Tobias Klauser authored
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of ARRAY_SIZE. Some trailing whitespaces are also removed. Patch is compile-tested on i386. Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
Alan Stern authored
This patch (as621) fixes a local variable conflict I accidently introduced into usb_set_configuration. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Paul Walmsley authored
Bugs involving the REPORT LUNS SCSI-3 command are much easier to track down if usb-storage displays the command's name, rather than "(Unknown command)". Signed-off-by:
Paul Walmsley <paul@booyaka.com> Cc: <mdharm-usb@one-eyed-alien.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Matthew Dharm authored
Someone recently pointed out to me that the MAINTAINERS entry for usb-storage was, perhaps, in need of changing. Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Matthew Dharm authored
This patch adds another usb-storage subdriver, which supports two fairly old dual-XD/SmartMedia reader-writers (USB1.1 devices). This driver was written by Daniel Drake <dsd@gentoo.org> -- he notes that he wrote this driver without specs, however a vendor-supplied GPL driver for the previous generation of products ("sma03") did prove to be quite useful, as did the sddr09 driver which also has to deal with low-level physical block layout on SmartMedia. The original patch has been reformed by me, as it clashed with the libusual patches. We really need to consolidate some of this common SmartMedia code, and get together with the MTD guys to share it with them as well. Signed-off-by:Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
