- 23 Jul, 2006 1 commit
-
-
Linus Torvalds authored
Shutting down the ondemand policy was fraught with potential problems, causing issues for SMP suspend (which wants to hot- unplug) all but the last CPU. This should fix at least the worst problems (divide-by-zero and infinite wait for the workqueue to shut down). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 21 Jul, 2006 39 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) [TIPC]: Removing useless casts [IPV4]: Fix nexthop realm dumping for multipath routes [DUMMY]: Avoid an oops when dummy_init_one() failed [IFB] After ifb_init_one() failed, i is increased. Decrease [NET]: Fix reversed error test in netif_tx_trylock [MAINTAINERS]: Mark LAPB as Oprhan. [NET]: Conversions from kmalloc+memset to k(z|c)alloc. [NET]: sun happymeal, little pci cleanup [IrDA]: Use alloc_skb() in IrDA TX path [I/OAT]: Remove pci_module_init() from Intel I/OAT DMA engine [I/OAT]: net/core/user_dma.c should #include <net/netdma.h> [SCTP]: ADDIP: Don't use an address as source until it is ASCONF-ACKed [SCTP]: Set chunk->data_accepted only if we are going to accept it. [SCTP]: Verify all the paths to a peer via heartbeat before using them. [SCTP]: Unhash the endpoint in sctp_endpoint_free(). [SCTP]: Check for NULL arg to sctp_bucket_destroy(). [PKT_SCHED] netem: Fix slab corruption with netem (2nd try) [WAN]: Converted synclink drivers to use netif_carrier_*() [WAN]: Cosmetic changes to N2 and C101 drivers [WAN]: Added missing netif_dormant_off() to generic HDLC ...
-
Panagiotis Issaris authored
Removing useless casts Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Routing realms exist per nexthop, but are only returned to userspace for the first nexthop. This is due to the fact that iproute2 only allows to set the realm for the first nexthop and the kernel refuses multipath routes where only a single realm is present. Dump all realms for multipath routes to enable iproute to correctly display them. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
It before entering in the loop for freeing the other ifb devices. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
A non-zero return value indicates success from spin_trylock, not error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Maintainer email not longer exists. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Panagiotis Issaris authored
Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Slaby authored
Use pci_register_driver instead of pci_module_init. Use PCI_DEVICE macro. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Ortiz authored
As pointed out by Christoph Hellwig, dev_alloc_skb() is not intended to be used for allocating TX sk_buff. The IrDA stack was exclusively calling dev_alloc_skb() on the TX path, and this patch fixes that. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Henrik Kretzschmar authored
Changes pci_module_init() to pci_register_driver(). Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
Every file should #include the headers containing the prototypes for its global functions. Especially in cases like this one where gcc can tell us through a compile error that the prototype was wrong... Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
This implements Rules D1 and D4 of Sec 4.3 in the ADDIP draft. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
Currently there is a code path in sctp_eat_data() where it is possible to set this flag even when we are dropping this chunk. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
This patch implements Path Initialization procedure as described in Sec 2.36 of RFC4460. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
This prevents a race between the close of a socket and receive of an incoming packet. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Chazarain authored
CONFIG_DEBUG_SLAB found the following bug: netem_enqueue() in sch_netem.c gets a pointer inside a slab object: struct netem_skb_cb *cb = (struct netem_skb_cb *)skb->cb; But then, the slab object may be freed: skb = skb_unshare(skb, GFP_ATOMIC) cb is still pointing inside the freed skb, so here is a patch to initialize cb later, and make it clear that initializing it sooner is a bad idea. [From Stephen Hemminger: leave cb unitialized in order to let gcc complain in case of use before initialization] Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Halasa authored
WAN: Converted synclink drivers to use netif_carrier_*() instead of hdlc_set_carrier(). Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Halasa authored
WAN: Cosmetic changes to N2 and C101 drivers Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Halasa authored
WAN: Fixed a problem with PPP/raw HDLC/X.25 protocols not doing netif_dormant_off() at startup. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that we always zero the IPCB->opts in ip_rcv, it is no longer necessary to do so before calling netif_rx for tunneled packets. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Found by scrashme. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Just do a linear enumeration so that we handle sun4d systems correctly. As a consequence, eliminate the hard coded keyboard and mouse channel line values, use the CONS_{KEYB,MS} flags instead. Also, report the keyboard/mouse Zilog channels just like the uart ones do. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We do it now in sunzilog_init() after all devices have been probed. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raymond Burns authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raymond Burns authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
By using for_each_node_by_type(). Also, correct a spurioud test in check_cpu_node() on sparc64. It is only called with nodes that have device_type "cpu". Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raymond Burns authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
1) Explicitly traverse to the root looking for the "sbi". 2) Grab the "board#" property from the sbi's parent and verify that this parent is an "io-unit" node. 3) Skip IRQ initialization when device lacks "reg" property. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Otherwise we will deref half-initialized channel pointers and crash in the interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Just name them "sbus%d" otherwise on sun4d we try to register multiple entries named "sbi@0,0" which does not work. Based upon a report from Raymond Burns. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bob Breuer authored
On sparc32 the prom_{first,next}prop() interfaces work a little differently. The buffer argument is ignored on sparc32 and the firmware just returns a raw pointer to the property name. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Table sizing code should look for "se" not "su" nodes. The chip at the lower address should get the first index. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marc Zyngier authored
Register second SAB port before the first one, as serial A is wired to it, and expected to appear as ttyS0. Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The m68k port's sun3 asm/oplib.h had a stray reference too, so I killed that off as well. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sabre and Psycho PCI controllers can have partial interrupt-map properties, meaning that on-board devices don't match up to any entries. Instead, they are fully specified from the beginning and we should pass them directly to the IRQ translator as-is. Also, fill in the necessary translator slots for the "graphics" and "expansion UPA" interrupts on Sabre, Psycho, and SYSIO SBUS. Increase PROMREG_MAX to 24, as seen on SUNW,ffb devices. Finally, prevent accidentally writing past the end of the of_device struct resource[] and irqs[] arrays. Spit out a log message when we ignore some entries because there are too many of them. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (38 commits) [SCSI] More buffer->request_buffer changes [SCSI] mptfusion: bump version to 3.04.01 [SCSI] mptfusion: misc fix's [SCSI] mptfusion: firmware download boot fix's [SCSI] mptfusion: task abort fix's [SCSI] mptfusion: sas nexus loss support [SCSI] mptfusion: sas loginfo update [SCSI] mptfusion: mptctl panic when loading [SCSI] mptfusion: sas enclosures with smart drive [SCSI] NCR_D700: misc fixes (section and argument ordering) [SCSI] scsi_debug: must_check fixes [SCSI] scsi_transport_sas: kill the use of channel [SCSI] scsi_transport_sas: add expander backlink [SCSI] hide EH backup data outside the scsi_cmnd [SCSI] ibmvscsi: handle inactive SCSI target during probe [SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseries [SCSI] aic7[9x]xx: Remove last vestiges of reverse_scan [SCSI] aha152x: stop poking at saved scsi_cmnd members [SCSI] st.c: Improve sense output [SCSI] lpfc 8.1.7: Change version number to 8.1.7 ...
-