Fixed the error from kobject_add() at reconnection the usb audio device.
This happens when an app keeps opening a device while the device is
replugged, due to the confliction of the internal bookkept index and
the really empty slot.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Without the patch below namelist[0] will not be freed in case
of kmalloc error.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Playing with spdif output on cmipci i've noticed the SPDO5V option does
not change appropriate bits the register.
The _snd_cmipci_uswitch_put checks the change in flags in wrong way.
If 'active' state of an option corresponds to a _zero_ bits in a hw
register then function fails. The SPDO5V is the sample.
In the most cases 'active' state of option is set through an non-zerio
bits in a register. This case works fine.
The fix attached.
Unfortunately i was unable to change spdif output voltage anyway.
Although the register changes right at least.
From: Timofei V. Bondarenko <tim@ipi.ac.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Fix NULL dereference in hda_generic.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

This patch adds the Intel ICH9 HD Audio controller DID's for ALSA.
Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

The C-Media CM6501 chip's descriptors say that altsetting 5 supports
48 kHz, but it actually plays at 96 kHz.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Fix races between the timer handler and the close function.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Add the support for HD audio controllers of MCP51,MCP55,MCP61,MCP65 & MCP67.
Signed-off-by: Peer Chen <pchen@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: Delete mls_copy_context

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] PNX8550: Fix system timer support
  [MIPS] TX49: Fix use of CDEX build_store_reg()
  [MIPS] pnx8550: Fix write_config_byte() PCI config space accessor
  [MIPS] Fix build errors on SEAD
  [MIPS] SMTC build fix
  [MIPS] csum_partial and copy in parallel
  [MIPS] Malta: Add missing MTD file.

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Provide basic printk_clock() implementation
  [ARM] Resolve fuse and direct-IO failures due to missing cache flushes
  [ARM] pass vma for flush_anon_page()
  [ARM] Fix potential MMCI bug
  [ARM] Fix kernel-mode undefined instruction aborts
  [ARM] 4082/1: iop3xx: fix iop33x gpio register offset
  [ARM] 4070/1: arch/arm/kernel: fix warnings from missing includes
  [ARM] 4079/1: iop: Update MAINTAINERS

This reverts commit b0268726, which has
been linked to several problem reports with IO-APIC and the timer.
Machines either don't boot because the timer doesn't happen, or we get
double timer interrupts because we end up double-routing the timer irq
through multiple interfaces.

See for example

	http://lkml.org/lkml/2006/12/16/101
	http://lkml.org/lkml/2007/1/3/9
	http://bugzilla.kernel.org/show_bug.cgi?id=7789

about some of the discussion.

Patches to fix this cleanup exist (and have been confirmed to work fine
at least for some of the affected cases) and we'll revisit it for
2.6.21, but this late in the -rc series we're better off just reverting
the incomplete commit that caused the problems.
Suggested-by: Adrian Bunk <bunk@stusta.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Yinghai Lu <yinghai.lu@amd.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This deletes mls_copy_context() in favor of mls_context_cpy() and
replaces mls_scopy_context() with mls_context_cpy_low().
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>

the patch inlined below restores proper time accounting for PNX8550-based
boards. It also gets rid of #ifdef in the generic code which becomes
unnecessary then.

It's functionally identical to the previous patch with the same name but
it has minor comments from Atsushi and Sergei taken into account.
Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The commit a923660d786a53e78834b19062f7af2535f7f8ad accidently
prevents TX49 from using CDEX.  Use build_dst_pref() only if prefetch
for store was really available.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

There's a serious typo in the function:
  arch/mips/pci/ops-pnx8550.c:write_config_byte()

The parameter passed to the function config_access() is PCI_CMD_CONFIG_READ
instead of PCI_CMD_CONFIG_WRITE. This renders any attempts to write
a single byte to the PCI configuration registers useless.

This problem does not exist for write_config_word() nor write_config_dword().

This problem has been there since kernel v2.6.17 and is still there
as of kernel v2.6.19.1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Quick and dirty fix for build errors on SEAD.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pass "irq" to __DO_IRQ_SMTC_HOOK() macro.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Implement optimized asm version of csum_partial_copy_nocheck,
csum_partial_copy_from_user and csum_and_copy_to_user which can do
calculate and copy in parallel, based on memcpy.S.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Current sched_clock() implementations on ARM cause unbootable kernels
with PRINTK_TIME support enabled.  To avoid this, provide a basic
printk_clock() implementation which avoids sched_clock() being called
before the page tables have been set up.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

fuse does not work on ARM due to cache incoherency issues - fuse wants
to use get_user_pages() to copy data from the current process into
kernel space.  However, since this accesses userspace via the kernel
mapping, the kernel mapping can be out of date wrt data written to
userspace.

This can lead to unpredictable behaviour (in the case of fuse) or data
corruption for direct-IO.

This resolves debian bug #402876
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Since get_user_pages() may be used with processes other than the
current process and calls flush_anon_page(), flush_anon_page() has to
cope in some way with non-current processes.

It may not be appropriate, or even desirable to flush a region of
virtual memory cache in the current process when that is different to
the process that we want the flush to occur for.

Therefore, pass the vma into flush_anon_page() so that the architecture
can work out whether the 'vmaddr' is for the current process or not.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The MMCI driver might end up aborting the initial command and leaving
the data part of the command sequence still in place.  Avoid this
problem by ensuring that any data sequence is properly cleared out
when a command completes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

If the kernel attempts to execute a CP1 or CP2 instruction and it
aborts, and a FP emulator is not loaded, we try to return as if to
a user context, instead of the proper kernel context.  Since the
fault came from kernel mode, we must use the kernel return paths.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This reverts commit 59287c09.

Hugh Dickins reports that it causes random failures on x86 with SuSE
10.2, and points out

  "Isn't that randomization, anywhere from 0x10000 to ELF_ET_DYN_BASE,
   sure to place the ET_DYN from time to time just where the comment
   says it's trying to avoid? I assume that somehow results in the error
   reported."

(where the comment in question is the existing comment in the source
code about mmap/brk clashes).
Suggested-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Marcus Meissner <meissner@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

iop33x gpio offset is correct in include/asm-arm/arch-iop33x/iop33x.h, but
include/asm-arm/hardware/iop3xx.h adds 4.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Include <asm/io.h> to fix the warning:

arch/arm/kernel/traps.c:647:6: warning: symbol '__readwrite_bug' was not declared. Should it be static?

Include <linux/mc146818rtc.h> to fix the warning:
arch/arm/kernel/time.c:42:1: warning: symbol 'rtc_lock' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  [PATCH] Driver core: Fix prefix driver links in /sys/module by bus-name

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  [PATCH] PCI: disable PCI_MULTITHREAD_PROBE

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: asix: Fix AX88772 device PHY selection
  USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers
  sisusb_con warning fixes
  USB: Fixed bug in endpoint release function.
  USB: small update to Documentation/usb/acm.txt
  USB storage: fix ipod ejecting issue
  USB Storage: unusual_devs: add supertop drives
  USB: omap_udc build fixes (sync with linux-omap)
  USB: funsoft is borken on sparc
  USB: fix interaction between different interfaces in an "Option" usb device
  UHCI: support device_may_wakeup
  UHCI: make test for ASUS motherboard more specific

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/m41t00: Do not forget to write year
  i2c-mv64xxx: Fix random oops at boot
  i2c: Migration aids for i2c_adapter.dev removal
  i2c-pnx: Add entry to MAINTAINERS
  i2c-pnx: Fix interrupt handler, get rid of EARLY config option

On ia64, the various functions that make up cn_proc.c cause kernel
unaligned access errors.

If you are using these, for example, to get notification about all tasks
forking and exiting, you get multiple unaligned access errors per process.

Use put_unaligned() in the appropriate palces to fix this.
Signed-off-by: Erik Jacobson <erikj@sgi.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

At the end of shrink_all_memory() we forget to recalculate lru_pages: it can
be zero.

Fix that up, and add a helper function for this operation too.

Also, recalculate lru_pages each time around the inner loop to get the
balancing correct.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Looks like this is the problem, which point Al Viro some time ago:

ufs's get_block callback allocates 16k of disk at a time, and links that
entire 16k into the file's metadata.  But because get_block is called for only
a single buffer_head (a 2k buffer_head in this case?) we are only able to tell
the VFS that this 2k is buffer_new().

So when ufs_getfrag_block() is later called to map some more data in the file,
and when that data resides within the remaining 14k of this fragment,
ufs_getfrag_block() will incorrectly return a !buffer_new() buffer_head.

I don't see _right_ way to do nullification of whole block, if use inode
page cache, some pages may be outside of inode limits (inode size), and
will be lost; if use blockdev page cache it is possible to zero real data,
if later inode page cache will be used.

The simpliest way, as can I see usage of block device page cache, but not only
mark dirty, but also sync it during "nullification".  I use my simple tests
collection, which I used for check that create,open,write,read,close works on
ufs, and I see that this patch makes ufs code 18% slower then before.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

These days, if you swapoff when there isn't enough memory, OOM killer gives
"BUG: scheduling while atomic" and the machine hangs: badness() needs to do
its PF_SWAPOFF return after the task_unlock (tasklist_lock is also held
here, so p isn't going to be freed: PF_SWAPOFF might get turned off at any
moment, but that doesn't really matter).
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

write_lcd() in toshiba_acpi returns 0 on success since the big ACPI patch
merged in 2.6.20-rc2.  It should return count.
Signed-off-by: Matthijs van Otterdijk <thotter@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

qconf may cause SIGSEGV by trying to show debug information on empty menu
items
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>