- 11 Oct, 2006 40 commits
-
-
Randy Dunlap authored
- In parameter descriptions, strip all whitespace between the parameter name (e.g., @len) and its description so that the description is indented uniformly in text and man page modes. Previously, spaces or tabs (which are used for cleaner source code viewing) affected the produced output in a negative way. Before (man mode): to Destination address, in user space. from Source address, in kernel space. n Number of bytes to copy. After (man mode): to Destination address, in user space. from Source address, in kernel space. n Number of bytes to copy. - Fix/clarify a few function description comments. Signed-off-by:Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Mike Frysinger authored
The nbd header uses __be32 and such types but doesn't actually include the header that defines these things (linux/types.h); so let's include it. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Randy Dunlap authored
Drop __inline, __always_inline, and noinline in the produced kernel-doc output, similar to other pseudo directives. Signed-off-by:
-
Randy Dunlap authored
Place kernel-doc function comment header immediately before the function that is being documented. Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc function name in usercopy.c. Signed-off-by:
-
Ingo Molnar authored
Bug reported and fixed by Tilman Schmidt <tilman@imap.cc>: if lockdep is enabled then log messages make it to /var/log/messages belatedly. The reason is a missed wakeup of klogd. Initially there was only a lockdep_internal() protection against lockdep recursion within vprintk() - it grew the 'outer' lockdep_off()/on() protection only later on. But that lockdep_off() made the release_console_sem() within vprintk() always happen under the lockdep_internal() condition, causing the bug. The right solution to remove the inner protection against recursion here - the outer one is enough. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Aneesh Kumar authored
I was looking at lockdep-desing.txt and i guess i am confused with the changes with respect to fd7bcea3. It says + '.' acquired while irqs enabled + '+' acquired in irq context + '-' acquired in process context with irqs disabled + '?' read-acquired both with irqs enabled and in irq context + But the get_usage_chars() function does this for '-' if (class->usage_mask & LOCKF_ENABLED_HARDIRQS) *c1 = '-'; So i guess what would be correct would be '.' acquired while irqs disabled '+' acquired in irq context '-' acquired with irqs enabled '?' read acquired in irq context with irqs enabled. Acked-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Adrian Bunk authored
CONFIG_PCI=n, CONFIG_HT_IRQ=y results in the following compile error: ... LD vmlinux arch/i386/mach-generic/built-in.o: In function `apicid_to_node': summit.c:(.text+0x53): undefined reference to `apicid_2_node' arch/i386/kernel/built-in.o: In function `arch_setup_ht_irq': (.text+0xcf79): undefined reference to `write_ht_irq_low' arch/i386/kernel/built-in.o: In function `arch_setup_ht_irq': (.text+0xcf85): undefined reference to `write_ht_irq_high' arch/i386/kernel/built-in.o: In function `k7nops': alternative.c:(.data+0x1358): undefined reference to `mask_ht_irq' alternative.c:(.data+0x1360): undefined reference to `unmask_ht_irq' make[1]: *** [vmlinux] Error 1 Bug report by Jesper Juhl. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Aneesh Kumar authored
Signed-off-by:
-
Matthew Wilcox authored
There's nothing arch-specific about check_signature(), so move it to <linux/io.h>. Use a cross between the Alpha and i386 implementations as the generic one. Signed-off-by:
Matthew Wilcox <willy@parisc-linux.org> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Matthew Wilcox authored
In preparation for moving check_signature, change these users from asm/io.h to linux/io.h Signed-off-by:
-
Monakhov Dmitriy authored
A couple of flush_dcache_page()s are missing on the I/O-error paths. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Eric Sesterhenn authored
Aince all callers dereference sb, and this function does so earlier too, we dont need the check. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Trond Myklebust authored
If try_to_release_page() is called with a zero gfp mask, then the filesystem is effectively denied the possibility of sleeping while attempting to release the page. There doesn't appear to be any valid reason why this should be banned, given that we're not calling this from a memory allocation context. For this reason, change the gfp_mask argument of the call to GFP_KERNEL. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Steve Dickson <SteveD@redhat.com> Signed-off-by:
-
Matthias Urlichs authored
The pipe-a-coredump-to-a-program feature was undocumented. *Grumble*. NB: a good enhancement to that patch would be: save all the stuff that a core file can get from the %x expansions in the environment. Signed-off-by:
Matthias Urlichs <matthias@urlichs.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Reinette Chatre authored
lib/bitmap.c:bitmap_parse() is a library function that received as input a user buffer. This seemed to have originated from the way the write_proc function of the /proc filesystem operates. This has been reworked to not use kmalloc and eliminates a lot of get_user() overhead by performing one access_ok before using __get_user(). We need to test if we are in kernel or user space (is_user) and access the buffer differently. We cannot use __get_user() to access kernel addresses in all cases, for example in architectures with separate address space for kernel and user. This function will be useful for other uses as well; for example, taking input for /sysfs instead of /proc, so it was changed to accept kernel buffers. We have this use for the Linux UWB project, as part as the upcoming bandwidth allocator code. Only a few routines used this function and they were changed too. Signed-off-by:
Reinette Chatre <reinette.chatre@linux.intel.com> Signed-off-by:
Inaky Perez-Gonzalez <inaky@linux.intel.com> Cc: Paul Jackson <pj@sgi.com> Cc: Joe Korty <joe.korty@ccur.com> Signed-off-by:
-
Maciej W. Rozycki authored
A couple of HDIO IOCTLs are not yet handled and a few others are marked as using a pointer rather than an unsigned long. The formers include: HDIO_GET_WCACHE, HDIO_GET_ACOUSTIC, HDIO_GET_ADDRESS and HDIO_GET_BUSSTATE. The latters are: HDIO_SET_MULTCOUNT, HDIO_SET_UNMASKINTR, HDIO_SET_KEEPSETTINGS, HDIO_SET_32BIT, HDIO_SET_NOWERR, HDIO_SET_DMA, HDIO_SET_PIO_MODE and HDIO_SET_NICE. Additionally 0x330 used to be HDIO_GETGEO_BIG and may be issued by 32-bit `hdparm' run on a 64-bit kernel making Linux complain loudly. This is a fix for these issues. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
A failure in invalidate_inode_pages2_range() can result in unpleasant things happening in NFS (at least). Stick a WARN_ON_ONCE() in there so we can find out if it happens, and maybe why. (akpm: might be a -mm-only patch, we'll see..) Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Steve Dickson <SteveD@redhat.com> Signed-off-by:
-
Nick Piggin authored
This likely profiling is pretty fun. I found a few possible problems in sched.c. This patch may be not measurable, but when I did measure long ago, nooping (un)likely cost a couple of % on scheduler heavy benchmarks, so it all adds up. Tweak some branch hints: - the 2nd 64 bits in the bitmask is likely to be populated, because it contains the first 28 bits (nearly 3/4) of the normal priorities. (ratio of 669669:691 ~= 1000:1). - it isn't unlikely that context switching switches to another process. it might be very rapidly switching to and from the idle process (ratio of 475815:419004 and 471330:423544). Let the branch predictor decide. - preempt_enable seems to be very often called in a nested preempt_disable or with interrupts disabled (ratio of 3567760:87965 ~= 40:1) Signed-off-by:
Nick Piggin <npiggin@suse.de> Acked-by:
-
Jeff Garzik authored
- handle sysfs error - handle driver model errors - de-obfuscate platform_device_register_simple() call, which included an assignment in between two function calls, in the same C statement. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Vasily Averin authored
Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT2_ERRORS_CONTINUE should be read from the superblock as default value for error behaviour. parse_option() should clean the alternative options and should not change default value taken from the superblock. Signed-off-by:Vasily Averin <vvs@sw.ru> Acked-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
Dmitry Mishin authored
Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT3_ERRORS_CONTINUE should be taken from the superblock as default value for error behaviour. Signed-off-by:Dmitry Mishin <dim@openvz.org> Acked-by:
-
Florin Malita authored
Module taint flags listing in Oops/panic has a couple of issues: * taint_flags() doesn't null-terminate the buffer after printing the flags * per-module taints are only set if the kernel is not already tainted (with that particular flag) => only the first offending module gets its taint info correctly updated Some additional changes: * 'license_gplok' is no longer needed - equivalent to !(taints & TAINT_PROPRIETARY_MODULE) - so we can drop it from struct module * exporting module taint info via /proc/module: pwc 88576 0 - Live 0xf8c32000 evilmod 6784 1 pwc, Live 0xf8bbf000 (PF) Signed-off-by:
Florin Malita <fmalita@gmail.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Alan Cox authored
Some people find their Jmicron pata port reports its disabled even though it has devices on it and was boot probed. Fix this (Candidate for 2.6.18.*, less so for 2.6.19 as we've got a proper jmicron driver on the merge for that to replace ide-generic support) Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
If grow_buffers() is for some reason passed a block number which wants to lie outside the maximum-addressable pagecache range (PAGE_SIZE * 4G bytes) then it will accidentally truncate `index' and will then instnatiate a page at the wrong pagecache offset. This causes __getblk_slow() to go into an infinite loop. This can happen with corrupted disks, or with software errors elsewhere. Detect that, and handle it. Signed-off-by:
-
Stephane Eranian authored
This is a follow-up patch based on the review for perfmon2. This patch adds the carta_random32() library routine + carta_random32.h header file. This is fast, simple, and efficient pseudo number generator algorithm. We use it in perfmon2 to randomize the sampling periods. In this context, we do not need any fancy randomizer. Signed-off-by:
stephane eranian <eranian@hpl.hp.com> Cc: David Mosberger <david.mosberger@acm.org> Signed-off-by:
-
Davide Libenzi authored
Implement the epoll_pwait system call, that extend the event wait mechanism with the same logic ppoll and pselect do. The definition of epoll_pwait is: int epoll_pwait(int epfd, struct epoll_event *events, int maxevents, int timeout, const sigset_t *sigmask, size_t sigsetsize); The difference between the vanilla epoll_wait and epoll_pwait is that the latter allows the caller to specify a signal mask to be set while waiting for events. Hence epoll_pwait will wait until either one monitored event, or an unmasked signal happen. If sigmask is NULL, the epoll_pwait system call will act exactly like epoll_wait. For the POSIX definition of pselect, information is available here: http://www.opengroup.org/onlinepubs/009695399/functions/select.htmlSigned-off-by:Davide Libenzi <davidel@xmailserver.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
David Woodhouse authored
In order to encourage people to notice when they break the exported headers, add a config option which automatically runs the sanity checks when building vmlinux. That way, those who use allyesconfig will notice failures. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Now that various memory splits are enabled, add a config option allowing the user to compile UML for its need - HOST_2G_2G allowed to choose either 3G/1G or 2G/2G, and enabling it reduced the usable virtual memory. Detecting this at run time should be implemented in the future, but we must make the stop-gap measure work well enough (this is valid in _many_ cases). Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Deprecate TT mode in Kconfig so that users won't select it, update the MODE_SKAS description (it was largely obsolete and misleadin) and btw describe advantages for high memory usage with CONFIG_STATIC_LINK. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
The export is together with the definition, in arch/x86_64/lib/csum-partial.c, which is compiled in by arch/um/sys-x86_64/Makefile. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Unify macros common to x86 and x86_64 kernel-offsets.h files. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Enable compilation of x86_64 crypto code;, and add the needed constant to make the code compile again (that macro was added to i386 asm-offsets between 2.6.17 and 2.6.18, in 6c2bb98b). Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Declare UML partial support for LOCKDEP - however IRQFLAGS tracing requires some coding which nobody did yet, so we cannot run full lockdep on UML. Grep for CONFIG_TRACE_IRQFLAGS on i386 code to find their implementation. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
On a 64bit Uml, if run under "setarch i386" (which a user did), uname() currently returns the obtained i686 as machine - fix that. Btw, I'm quite surprised that under setarch i386 a 64-bit binary can run. Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Makes UML compile on any possible processor choice. The two problems were: *) x86 code, when 386 is selected, checks at runtime boot_cpuflags, which we do not have. *) 3Dnow support for memcpy() et al. does not compile currently and fixing this is not trivial, so simply disable it; with this change, if one selects MK7 UML compiles (while it did not). Signed-off-by:
-
