- 07 Nov, 2005 40 commits
-
-
Corey Minyard authored
Make module_param and MODULE_PARAM_DESC agree on poweroff_powercycle name. There was an extraneous ifdef in the IPMI poweroff code that prevented it from working if PROC_FS was disabled. Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
Modify the IPMI watchdog parameters (the ones that make sense) to be exported from sysfs. This is somewhat complicated because these parameters have side-effects that must be handled. Signed-off-by:
-
Corey Minyard authored
A number of small changes for the various system interface drivers, consolidated from a number of patches from Matt Domsch. Clear B2H_ATN and drain the BMC message buffer on command timeout. This prevents further commands from failing after a timeout. Add bt_debug and smic_debug module parameters, expose them in sysfs. This lets you enable and disable debugging messages at runtime. Unsigned jiffies math in ipmi_si_intf.c causes a too-large value to be passed to ->event() after jiffies wrap-around. The BT driver had caught this, but didn't know how to fix it. Now all calls to ->event() use a sane value for time. Increase timeout for commands handed to the BT driver from 2 seconds to 5 seconds. This is necessary particularly when the previous command was a "Clear SEL", as that command completes, yet the BMC isn't really ready to handle another command yet. Silence BT debugging messages which were being printed on the console. Increase SMIC timeout form 1/10s to 2s. This is needed on Dell PowerEdge 2650 and PowerEdge 750 with ERA/O cards to allow commands to complete without timing out. Adds kcs_debug module param, to match behavior of BT and SMIC. This also prevents messages from being sent to the console unless explicitly requested. Signed-off-by:
-
Corey Minyard authored
This patch is rather large, but it really can't be done in smaller chunks easily and I believe it is an important change. This has been out and tested for a while in the latest IPMI driver release. There are no functional changes, just changes as necessary to convert the locking over (and a few minor style updates). The IPMI driver uses read/write locks to ensure that things exist while they are in use. This is bad from a number of points of view. This patch removes the rwlocks and uses refcounts and RCU lists to manage what the locks did. Signed-off-by:
-
Nick Piggin authored
Introduce the notion of cooperating processes (those that submit requests close to one another), and use these statistics to make better choices about whether or not to do anticipatory waiting. Help and analysis from Seetharami Seelam <seelam@cs.utep.edu> Performance testing from Seelam: I set up my system and executed a couple of tests that I used for OLS. I tested with AS, cooperative process patch merged in -mm tree (which I called Nick, below) and the cooperative patch with modifications to as_update_iohist (which I called Seelam). I used a dual-processor (2.28GHz Pentium 4 Xeon) system, with 1 GB main memory and 1 MB L2 cache, running Linux 2.6.9. Only a single processor is used for the experiments. I used 7.2K RPM Maxtor 10GB drive configured with ext2 file system. Experiment 1 (ex1) consists of reading one Linux source trees using find . -type f -exec cat '{}' ';' > /dev/null. Experiment 2 (ex2) consists of reading two disjoint Linux source trees using find . -type f -exec cat '{}' ';' > /dev/null. Experiment 3 (ex3) consists of streaming read of a 2GB file in the background and 1 instance of the chunk reads in Experiment 1. Timings for reading the Linux source are shown below: AS Nick Seelam ex1: 0m25.813s 0m27.859s 0m27.640s ex2: 1m11.468s 1m13.918s 1m5.869s ex3: 81m44.352s 10m38.572s 6m47.994s The difference between the numbers in Experiment 3 must be due to the code in as_update_iohist. (akpm: that's not part of this patch. So this patch is "Nick"). Signed-off-by:Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Miklos Szeredi authored
This patch passes the file handle supplied in iattr to userspace, in case the ->setattr() was invoked from sys_ftruncate(). This solves the permission checking (or lack thereof) in ftruncate() for the class of filesystems served by an unprivileged userspace process. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Miklos Szeredi authored
This patch adds an atomic create+open operation. This does not yet work if the file type changes between lookup and create+open, but solves the permission checking problems for the separte create and open methods. Signed-off-by:
-
Miklos Szeredi authored
Add a new access call, which will only be called if ->permission is invoked from sys_access(). In all other cases permission checking is delayed until the actual filesystem operation. Signed-off-by:
-
Miklos Szeredi authored
Though the following changes are all backward compatible (from the kernel's as well as the library's POV) change the minor version, so interested applications can detect new features. Signed-off-by:
-
Miklos Szeredi authored
This patch extends the iattr structure with a file pointer memeber, and adds an ATTR_FILE validity flag for this member. This is set if do_truncate() is invoked from ftruncate() or from do_coredump(). The change is source and binary compatible. Signed-off-by:
-
Christoph Hellwig authored
The sys_ptrace boilerplate code (everything outside the big switch statement for the arch-specific requests) is shared by most architectures. This patch moves it to kernel/ptrace.c and leaves the arch-specific code as arch_ptrace. Some architectures have a too different ptrace so we have to exclude them. They continue to keep their implementations. For sh64 I had to add a sh64_ptrace wrapper because it does some initialization on the first call. For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Acked-By:
David Howells <dhowells@redhat.com> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Christoph Hellwig authored
Both AFFS and HPFS update the ctime and mtime in the write path, after generic_file_write returned and marked the inode dirty. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Christoph Hellwig authored
afs actually had a write method that returned different errors depending on whether some flag was set - better return the standard EINVAL errno. Signed-off-by:
-
Christoph Hellwig authored
No need to duplicate a generic readonly file ops table in befs. Signed-off-by:
-
Christoph Hellwig authored
No need to duplicate a generic readonly file ops table in befs. Signed-off-by:
-
Tim Schmielau authored
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by:
Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by:
-
Peter Staubach authored
There is a memory leak possible in dentry_open(). If get_empty_filp() fails, then the references to dentry and mnt need to be released. The attached patch adds the calls to dput() and mntput() to release these two references. Signed-off-by:
Peter Staubach <staubach@redhat.com> Signed-off-by:
-
Muli Ben-Yehuda authored
Updates to Documentation/vm/hugetlbpage.txt: - there's no need to select HUGETLB_PAGE manually and it's no longer under the processor menu. Update the text accordingly. - fix typos and trim trailing whitespace. Signed-Off-By:
Muli Ben-Yehuda <mulix@mulix.org> Signed-off-by:
-
Coywolf Qi Hunt authored
Get rid of the `int unused' parameter of __find_get_block_slow(). Signed-off-by:
Coywolf Qi Hunt <qiyong@fc-cn.com> Signed-off-by:
-
Davi Arnaut authored
Data allocated with "__getname()" should always be free'd with "__putname()" because of the AUDITSYSCALL code. Signed-off-by:
Davi Arnaut <davi.arnaut@gmail.com> Cc: Urban Widmark <urban@teststation.com> Signed-off-by:
-
Davi Arnaut authored
Data allocated with "__getname()" should always be free'd with "__putname()" because of the AUDITSYSCALL code. Signed-off-by:
-
Adrian Bunk authored
- "extern inline" -> "static inline" - every file should #include the headers containing the prototypes for it's global functions Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Marcelo Tosatti authored
Mikael Pettersson <mikpe@csd.uu.se> noted that the current 2.6-git (and 2.4) patch to disallow KDSKBSENT for unpriviledged users should be less restrictive allowing reading of current function key string entry, but not writing. Signed-off-by:
-
David Gibson authored
The code for FUTEX_WAKE_OP calls an arch callback, futex_atomic_op_inuser(). That callback can return an error code, but currently the caller assumes any error is EFAULT, and will try various things to resolve the fault before eventually giving up with EFAULT (regardless of the original error code). This is not a theoretical case - arch callbacks currently return -ENOSYS if the opcode they are given is bogus. This patch alters the code to detect non-EFAULT errors and return them directly to the user. Of course, whether -ENOSYS is the correct return value for the bogus opcode case, or whether EINVAL would be more appropriate is another question. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by:
-
Zach Brown authored
AIO was adding a new context's max requests to the global total before testing if that resulting total was over the global limit. This let innocent tasks get their new limit tested along with a racing guilty task that was crossing the limit. This serializes the _nr accounting with a spinlock It also switches to using unsigned long for the global totals. Individual contexts are still limited to an unsigned int's worth of requests by the syscall interface. The problem and fix were verified with a simple program that spun creating and destroying a context while holding on to another long lived context. Before the patch a task creating a tiny context could get a spurious EAGAIN if it raced with a task creating a very large context that overran the limit. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
David Howells authored
The attached patch removes a couple of incorrect and obsolete '!' operators left over from the conversion of the key permission functions from true/false returns to zero/error returns. Signed-Off-By:
-
Ingo Molnar authored
cleanup: use for_each_cpu() instead of an open-coded NR_CPUS loop. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Hans Reiser authored
Reiser4 uses radix trees to solve a trouble reiser4_readdir has serving nfs requests. Unfortunately, radix tree api lacks an operation suitable for modifying existing entry. This patch adds radix_tree_lookup_slot which returns pointer to found item within the tree. That location can be then updated. Both Nick and Christoph Lameter have patches which need this as well. Signed-off-by:
-
Andrew Morton authored
Add a few comments surrounding the generic readahead API. Also convert some ulongs into pgoff_t: the identifier for PAGE_CACHE_SIZE offsets into pagecache. Signed-off-by:
-
Badari Pulavarty authored
Add SHM_NORESERVE functionality similar to MAP_NORESERVE for shared memory segments. This is mainly to avoid abuse of OVERCOMMIT_ALWAYS and this flag is ignored for OVERCOMMIT_NEVER. Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Christoph Hellwig authored
The -EROFS check has moved up to permission() in the VFS a while ago. Signed-off-by:
-
Abhay Salunke authored
This patch has the changes to support the memory floor fix done in Dell BIOS. The BIOS incase of packet update mechanism would not accept packet placed in memory below a cretain address. This address is by default 128K but can change. The driver now can accept the memory floor if the user chooses to make it will try to allocate contiguous physical memory above the memory floor by allocating a set of packets till a valid memory allocation is made. All the allocates then are freed. This repeats for everty packet. This patch was created by Michael E Brown and has been tested on 2.6.14-rc5 Signed-of-by:
Michael E Brown <Michael_E_Brown@Dell.com> Signed-off-by:
Abhay Salunke <abhay_salunke@dell.com> Signed-off-by:
-
Kylene Jo Hall authored
driver_unregister is not being properly called when the init function returns an error case. Restructured the return logic such that this and the other cleanups all happen in one place. Preformed many of the cleanups that Andrew Morton's patch on Thursday made in tpm_atmel.c. Fixed Matthieu's concern about writing before discovery. (akpm: rmk said: This driver is buggy. You must not provide your own release function - it doesn't solve the problem which the warning (which you get when you don't provide one) is telling you about. You should convert your device driver over to the replacement dynamic platform support, once it is merged. IOW, something like: pdev = platform_device_alloc("mydev", id); if (pdev) { err = platform_device_add_resources(pdev, &resources, ARRAY_SIZE(resources)); if (err == 0) err = platform_device_add_data(pdev, &platform_data, sizeof(platform_data)); if (err == 0) err = platform_device_add(pdev); } else { err = -ENOMEM; } if (err) platform_device_put(pdev); ) Signed-off-by:Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
In a case documented as We should never be called with any of these states BUG() in a case that would later result in a NULL pointer dereference. Signed-off-by:
-
Kirill Smelkov authored
There is a wrong BUG in mxser_close. The BUG is triggered when tty->driver_data == NULL, But in fact this is not a bug, because tty->driver->close is called even when tty->driver->open fails. LDD3 tells us to do nothing in such cases. Signed-off-by:
Kirill Smelkov <kirr@mns.spb.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Kirill Smelkov authored
Fix leak of struct tty_driver in mxser_init & mxser_module_exit Signed-off-by:
-
Kirill Smelkov authored
Remove explicit tty_driver ops initialisation, because this is already done by tty_set_operations. Signed-off-by:
-
Bob Picco authored
This patch identifies the HPET Maintainers. Clemens in taking over as primary maintainer for the HPET driver. Clemens has i386 hardware with HPET and is a better choice than me because of this. I've shared this patch with all cc: recipients and there is agreement on ownership. Hopefully this eliminates future confusion in terms of where HPET maintenance is owned. Signed-off-by:
Bob Picco <bob.picco@hp.com> Cc: <clemens@ladisch.de> Cc: <venkatesh.pallipadi@intel.com> Cc: <bob.picco@hp.com> Signed-off-by:
-
Lennert Buytenhek authored
Reported by Eddy Petrisor <eddy.petrisor@gmail.com> fs/built-in.o(.text+0x35fdc): In function `hfs_mdb_put': : undefined reference to `unload_nls' fs/built-in.o(.text+0x35ff1): In function `hfs_mdb_put': : undefined reference to `unload_nls' fs/built-in.o(.text+0x367a5): In function `parse_options': super.c: undefined reference to `load_nls' fs/built-in.o(.text+0x367db):super.c: undefined reference to `load_nls' fs/built-in.o(.text+0x36938):super.c: undefined reference to `load_nls_default' Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Acked-by:
-
Paul E. McKenney authored
Remove the hlist_for_each_rcu() API, which is used only in one place, and is trivially converted to hlist_for_each_entry_rcu(), making the code shorter and more readable. Any out-of-tree uses may be similarly converted. Signed-off-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
