- 17 Oct, 2006 40 commits
-
-
Bjorn Helgaas authored
Nobody uses either one anymore. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Jes Sorensen authored
The current sn2_defconfig is obsolete, in particular the recent ATA changes are a pain, so here's a patch to get things in sync ... at least for a day or two :) Update sn_defconfig to match current community kernel tree. Signed-off-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Bjorn Helgaas authored
Reformat to fit in 80 columns. Fix a couple typos. Remove a couple unused labels. Signed-off-by:
-
Bjorn Helgaas authored
Linux maps PAL instructions with an ITR, but uses a DTC for PAL data. Section 11.10.2.1.3, "Making PAL Procedures Calls in Physical or Virtual Mode," of the SDM (rev 2.2), says we must therefore make all PAL calls with PSR.ic = 1 so that Linux can handle any TLB faults. PAL_CALL_IC_OFF is currently unused, and as long as we use the ITR + DTC strategy, we can't use it. So remove it. I also removed the code in ia64_pal_call_static() that conditionally cleared PSR.ic. Signed-off-by:
-
Jack Steiner authored
Allow pending IPIs to interrupt a timer interrupt that is looping in the do_timer() "while" loop in timer_interrupt(). (Interrupts are allowed at only 1 spot in the code). Signed-off-by:
Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Aron Griffis authored
I noticed these are declared extern outside of __KERNEL__, but surely they wouldn't be available to userland since they're defined in ioremap.c. Am I missing something here? If I'm right about this, then there's probably a good deal of other stuff in io.h that could move inside __KERNEL__, but at least this is a start. Signed-off-by:
Aron Griffis <aron@hp.com> Signed-off-by:
-
Tony Luck authored
Missed one piece of ia64 fallout from the global IRQ patch 7d12e780 Perfmon interrupt handler needs to use get_irq_regs() too. Acked-by:
stephane eranian <eranian@hpl.hp.com> Signed-off-by:
-
Stephen Hemminger authored
This reverts earlier change that attempted to fix flow control. Device needs to discard pause frames, otherwise it hangs after a while. Signed-off-by:Stephen Hemminger <shemminger@osdl.org>
-
Stephen Hemminger authored
When using flow control, the PHY needs to accept multicast pause frames. Without this fix, these frames were getting discarded by the PHY before doing any flow control. Signed-off-by: -
Stephen Hemminger authored
Mark version, this has been a lot of patches. Signed-off-by: -
Stephen Hemminger authored
Under high load it is possible to make the receiver FIFO get overloaded. The driver/hardware recover properly, so there is no reason to fill the log with lots of extra messages, just update counter. Signed-off-by: -
Stephen Hemminger authored
The result of flow control negotiation should not limit the next negotiatition. If board is plugged into an old half duplex 10Mbit port, without pause, then replugged into a gigabit port, it should negotiate what is desired, not inherit that last negotiation. Signed-off-by: -
Stephen Hemminger authored
Don't need to reset PHY twice on startup. Signed-off-by: -
Stephen Hemminger authored
The result of duplex negotiation is avaliable in the phy status register, so use that to simplify code and avoid rereading the PHY. Signed-off-by: -
Stephen Hemminger authored
The advertising bits (from ethtool.h) fit in 16 bits.
-
Stephen Hemminger authored
The advertisement bits for flow control are located in different location on fiber (1000baseX) Signed-off-by: -
Stephen Hemminger authored
When PHY is turned off on shutdown, it causes the IRQ to get stuck on. Make sure and disable the IRQ first, and if IRQ occurs when device is not running, don't access PHY because that will hang. Signed-off-by: -
Stephen Hemminger authored
The workaround timer is not needed in most systems with proper IRQ routing and by perodically waking up it adds to laptop power consumption. Signed-off-by: -
Stephen Hemminger authored
Some motherboards don't implement MSI correctly. The driver handles this but the warning is too verbose and overly cautious. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fm801-gp - handle errors from pci_enable_device() Input: gameport core - handle errors returned by device_bind_driver() Input: serio core - handle errors returned by device_bind_driver() Lockdep: fix compile error in drivers/input/serio/serio.c Input: serio - add lockdep annotations Lockdep: add lockdep_set_class_and_subclass() and lockdep_set_subclass() Input: atkbd - supress "too many keys" error message Input: i8042 - supress ACK/NAKs when blinking during panic Input: add missing exports to fix modular build
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Check for offline nodes in pci NUMA code [POWERPC] Better check in show_instructions [POWERPC] POWER6 has 6 PMCs [POWERPC] Never panic when taking altivec exceptions from userspace [POWERPC] Fix IO Window Updates on P2P bridges. [POWERPC] Add Makefile entry for MPC832x_mds support [POWERPC] Fix MPC8360EMDS PB board support [POWERPC] ppc: Add missing calls to set_irq_regs [POWERPC] Off-by-one in /arch/ppc/platforms/mpc8* [POWERPC] Add DOS partition table support to mpc834x_itx_defconfig [POWERPC] spufs: fix support for read/write on cntl [POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMA
-
Jeff Garzik authored
Most of the ISDN ->readstat() implementations needed to check copy_to_user() and put_user() return values. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Garzik authored
This is a particularly ugly on-failure bug, possibly security, since the lack of error handling here is covering up another class of bug: failure to handle copy_to_user() return values. The I4L API function ->readstat() returns an integer, and by looking at several existing driver implementations, it is clear that a negative return value was meant to indicate an error. Given that several drivers already return a negative value indicating an errno-style error, the current code would blindly accept that [negative] value as a valid amount of bytes read. Obvious damage ensues. Correcting ->readstat() handling to properly notice errors fixes the existing code to work correctly on error, and enables future patches to more easily indicate errors during operation. Signed-off-by:
-
Amol Lad authored
Signed-off-by:
Amol Lad <amol@verismonetworks.com> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Amol Lad authored
With Karsten Keil <kkeil@suse.de> save_flags()/cli() pair is replaced with spin_lock_irqsave() and restore_flags() replaced with spin_unlock_irqrestore() Tested compile only using allmodconfig Signed-off-by:
-
Neil Brown authored
The use of blocking notifier by _cpu_up and _cpu_down in cpu.c has two problem. 1/ An interaction with the workqueue notifier causes lockdep to spit a warning. 2/ A notifier could conceivable be added or removed while _cpu_up or _cpu_down are in process. As each notifier is called twice (prepare then commit/abort) this could be unhealthy. To fix to we simply take cpu_add_remove_lock while adding or removing notifiers to/from the list. This makes the 'blocking' usage unnecessary as all accesses to cpu_chain are now protected by cpu_add_remove_lock. So change "blocking" to "raw" in all relevant places. This fixes 1. Credit: Andrew Morton Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> (reporter) Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Peter Zijlstra authored
BUG: warning at kernel/rtmutex-debug.c:125/rt_mutex_debug_task_free() (Not tainted) [<c04051e3>] show_trace_log_lvl+0x58/0x16a [<c04057f0>] show_trace+0xd/0x10 [<c0405900>] dump_stack+0x19/0x1b [<c043f03d>] rt_mutex_debug_task_free+0x35/0x6a [<c04224c0>] free_task+0x15/0x24 [<c042378c>] copy_process+0x12bd/0x1324 [<c0423835>] do_fork+0x42/0x113 [<c04021dd>] sys_fork+0x19/0x1b [<c0403fb7>] syscall_call+0x7/0xb In copy_process(), dup_task_struct() also duplicates the ->pi_lock, ->pi_waiters and ->pi_blocked_on members. rt_mutex_debug_task_free() called from free_task() validates these members. However free_task() can be invoked before these members are reset for the new task. Move the initialization code before the first bail that can hit free_task(). Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Aneesh Kumar K.V authored
Add functions defined using ENTRY macro to the tags file. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Greg Banks authored
Some people want to do crazy things like pass multiple directories as the value of $(SUBDIRS) or $M. Mostly this kinda works, except that Makefile.modpost constructs a modpost commandline which fails modpost's argument parsing. This patch fixes that little wrinkle. Signed-off-by:
Greg Banks <gnb@melbourne.sgi.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Akinobu Mita authored
Make epca fail on initialization failure instead of panic. Cc: "Digi International, Inc" <Eng.Linux@digi.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Alan Cox <alan@redhat.com> Acked-by:
Scott Kilau <scottk@digi.com> Signed-off-by:
-
Akinobu Mita authored
If RAM disk driver initialization fails due to blk_alloc_queue() faulure, the gendisk structs stored in rd_disks[] will not be freed completely. This patch resolves that memory leak case by doing alloc_disk() and blk_alloc_queue() at the same time. Signed-off-by:
-
Peter Zijlstra authored
Lockdep doesn't like to enable interrupts when they are enabled already. BUG: warning at kernel/lockdep.c:1814/trace_hardirqs_on() (Not tainted) [<c04051ed>] show_trace_log_lvl+0x58/0x16a [<c04057fa>] show_trace+0xd/0x10 [<c0405913>] dump_stack+0x19/0x1b [<c043abfb>] trace_hardirqs_on+0xa2/0x11e [<c041463c>] apm_bios_call_simple+0xcd/0xfd [<c0415242>] apm+0x92/0x5b1 [<c0402005>] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: [<c04057fa>] show_trace+0xd/0x10 [<c0405913>] dump_stack+0x19/0x1b [<c043abfb>] trace_hardirqs_on+0xa2/0x11e [<c041463c>] apm_bios_call_simple+0xcd/0xfd [<c0415242>] apm+0x92/0x5b1 [<c0402005>] kernel_thread_helper+0x5/0xb Signed-off-by:
-
Jeff Garzik authored
With 64-bit resources on 32-bit platforms, the resource address might be larger than a void*. Fix printk to work regardless of resource size. Signed-off-by:
-
Jeff Garzik authored
Handle errors thrown in disk_sysfs_symlinks(), and propagate back to caller. The callers and associated functions don't do a real good job of handling kobject errors anyway (add_partition, register_disk, rescan_partitions), so this should do until something better comes along. Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Jan Kara authored
When IO error happens on metadata buffer, buffer is freed from memory and later fsync() is called, filesystems like ext2 fail to report EIO. We solve the problem by introducing a pointer to associated address space into the buffer_head. When a buffer is removed from a list of metadata buffers associated with an address space, IO error is transferred from the buffer to the address space, so that fsync can later report it. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
NeilBrown authored
It is possible for the ->fopen callback from lockd into nfsd to find that an answer cannot be given straight away (an upcall is needed) and so the request has to be 'dropped', to be retried later. That error status is not currently propagated back. So: Change nlm_fopen to return nlm error codes (rather than a private protocol) and define a new nlm_drop_reply code. Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply when this error comes back. Cause svc_process to drop a request which returns a status of rpc_drop_reply. [akpm@osdl.org: fix warning storm] Cc: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by:
-
NeilBrown authored
When an nfs server shuts down, lockd needs to release all the locks even though the client still holds them. It should therefore not 'unmonitor' the clients, so that the files in nfs/sm will still be there when the nfs server restarts, so that those clients will be told to reclaim their locks. However the hosts are fully unmonitored, so statd may well remove the files. lockd has a test for 'sm_sticky' and avoid the unmonitor call if it is set, but it is currently not set. So set it when tearing down lockd. Signed-off-by:
-
J. Bruce Fields authored
Coverity noticed that the error handling code in the NFSv4 callback client sets cb->cb_client to NULL, then calls rpc_shutdown_client with the NULL pointer. Coverity: #cid 1397 Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
-
