- 03 May, 2005 18 commits
-
-
Lucas Correia Villa Real authored
This is a trivial fix for a typo on Kconfig, where the Generic Random Early Detection algorithm is abbreviated as RED instead of GRED. Signed-off-by:
Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Juhl authored
kfree(0) is perfectly valid, checking pointers for NULL before calling kfree() on them is redundant. The patch below cleans away a few such redundant checks (and while I was around some of those bits I couldn't stop myself from making a few tiny whitespace changes as well). Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Acked-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Thomas Graf authored
Converts remaining rtnetlink_link tables to use c99 designated initializers to make greping a little bit easier. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Thomas Graf authored
Converts rtm_min and rtm_max arrays to use c99 designated initializers for easier insertion of new message families. RTM_GETMULTICAST and RTM_GETANYCAST did not have the minimal message size specified which means that the netlink message was parsed for routing attributes starting from the header. Adds the proper minimal message sizes for these messages (netlink header + common rtnetlink header) to fix this issue. Signed-off-by:
-
Thomas Graf authored
RTM_MAX is currently set to the maximum reserverd message type plus one thus being the cause of two bugs for new types being assigned a) given the new family registers only the NEW command in its reserved block the array size for per family entries is calculated one entry short and b) given the new family registers all commands RTM_MAX would point to the first entry of the block following this one and the rtnetlink receive path would accept a message type for a nonexisting family. This patch changes RTM_MAX to point to the maximum valid message type by aligning it to the start of the next block and subtracting one. Signed-off-by:
-
Thomas Graf authored
Converts xfrm_msg_min and xfrm_dispatch to use c99 designated initializers to make greping a little bit easier. Also replaces two hardcoded message type with meaningful names. Signed-off-by:
-
Thomas Graf authored
Makes the type > XFRM_MSG_MAX check behave correctly to protect access to xfrm_dispatch. Signed-off-by:
-
Herbert Xu authored
This patch includes net/ipv6.h from addrconf.h since it needs ipv6_addr_set. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
I made a mistake in my last patch to the raw socket checksum code. I used the value of inet->cork.length as the length of the payload. While this works with normal packets, it breaks down when IPsec is present since the cork length includes the extension header length. So here is a patch to fix the length calculations. Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
gcc-4.0 generates altivec code implicitly when -mcpu indicates an altivec capable CPU which is not suitable for the kernel. However, we used to set -mcpu=970 when CONFIG_ALTIVEC was set because a gcc-3.x bug prevented from using -maltivec along with -mcpu=power4, thus prevented building the RAID6 altivec code. This patch fixes all of this by testing for the gcc version. If 4.0 or later, just normally use -mcpu=power4 and let the RAID6 code add -maltivec to the few files it needs to be compiled with altivec support. For 3.x, we still use -mcpu=970 to work around the above problem, which is fine as 3.x will never implicitly generate altivec code. The Makefile hackery may not be the most lovely, I welcome anybody more skilled than me to improve it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dave Kleikamp authored
Modify xtSearch so that it returns the next allocated block when the requested block is unmapped. This can be used to make sure we don't create a new extent that overlaps the next one. Signed-off-by:
Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by:
-
Dave Kleikamp authored
This patch adds jfs_syncpt, which calls lmLogSync to write sync points to the journal both in jfs_sync_fs and when sync barrier processing completes. lmLogSync accomplishes two things: 1) it pushes logged-but-dirty metadata pages to disk, and 2) it writes a sync record to the journal so that jfs_fsck doesn't need to replay more transactions than is necessary. Signed-off-by:
-
Dave Kleikamp authored
jfs has never worked on architecutures where the page size was not 4K. Signed-off-by:
-
Dave Kleikamp authored
JFS code has always assumed a page size of 4K. This patch fixes the non-pagecache uses of pages to deal with larger pages. Signed-off-by:
-
Dave Kleikamp authored
JFS was creating a new IAG (inode aggregate group) in one address space, and afterwards, accessing it from another. This could lead to complications when cache pages contain more than one page of jfs metadata. This patch causes the IAG to be initialized in the same address space that it is subsequently accessed with. This also elimitates an I/O, but IAG's aren't created too often. Signed-off-by:
-
Dave Kleikamp authored
Use an inline pxd list rather than an xad list in the xadlock. When the number of extents being modified can fit with the xadlock, a transaction can be committed asynchronously. Using a list of pxd's instead of xad's allows us to fit 4 extents, rather than 2. Signed-off-by:
-
- 02 May, 2005 6 commits
-
-
Benjamin Herrenschmidt authored
The cpufreq core patch I sent earlier got only half-applied. I added a flag to let the low level driver disable an annoying warning on suspend/resume that is normal on ppc, but the "resume" part of it wasn't applied. This just adds back that missing bit. The original patch also reworked the resume() function to avoid nesting too many if () statements along the way I did the suspend() one, but I didn't include that in the patch below. Signed-off-by:
-
Benjamin Herrenschmidt authored
The clock spreading disable/enable code was called to late/early during the suspend/resume code on some laptops and would trigger a might_sleep() warning due to the down() call in the low level i2c code. This fixes it by calling those functions earlier/later when interrupts are still enabled. Signed-off-by:
-
Benjamin Herrenschmidt authored
As Al Viro noticed, my previous fix missed one instance of "device" in the driver local debug code. Harmless unless you tweak the #define's in there but still work fixing. Signed-off-by:
-
Benjamin Herrenschmidt authored
A typo in the machine table incorrectly mark the 101 PowerBook as needing explicit callback from the video driver to enable sleep mode. I did not implement that mecanism for chipsest older than r128, so we need to mark this machine as always beeing able to sleep for now. Signed-off-by:
-
Benjamin Herrenschmidt authored
My newer iMac mini driver doesn't build with verbose debug enabled. This fixes it, and removes an erroneous error printk (since it's normal on some machine to not find some gpios on the "first try"). Signed-off-by:
-
Benjamin Herrenschmidt authored
We are experiencing a problem when flushing the CPU caches before sleep on some laptop models using the 750FX CPU rev 1.X. While I haven't been able to figure out a proper explanation for what's going on, I do have a workaround that seem to work reliably and allows those machine to sleep and wakeup properly again. I'll re-update that code if/when I ever find exactly what is happening with those CPU revisions. Signed-off-by:
-
- 01 May, 2005 16 commits
-
-
Jens Axboe authored
Only issue a cdrom cache flush if we've done write to the drive. The ->media_written() flag keeps track of that. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Adrian Bunk authored
This patch fixes an array overflow found by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Adrian Bunk authored
This patch fixes an array overflow found by the Coverity checker. Signed-off-by:
-
Adrian Bunk authored
This patch fixes an array overflow found by the Coverity checker. Signed-off-by:
-
Adrian Bunk authored
This patch fixes an array overflow found by the Coverity checker. Signed-off-by:
-
Adrian Bunk authored
This patch fixes an array overflow found by the Coverity checker. Signed-off-by:
-
Adrian Bunk authored
Another large rollup of various patches from Adrian which make things static where they were needlessly exported. Signed-off-by:
-
Cosmin Nicolaescu authored
The patch updates the documentation for /proc. super-nr and super-max have been dropped from the kernel since 2.4.9 due to minor numbering issues. This change was not documented in the documentation. Signed-off-by:
-
Sam Ravnborg authored
We have at least two users which were confused by these messages, myself included. Signed-off-by:
Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Martin Waitz authored
The start page for each book has changed from book1.html to index.html. Update our generated links acocrdingly. Signed-off-by:
Martin Waitz <tali@admingilde.org> Signed-off-by:
-
Martin Waitz authored
With the custom stylesheet, functions are rendered using ANSI-C syntax and xmlto is a bit quieter. Signed-off-by:
-
Martin Waitz authored
xmlto uses standared XSLT templates to generate manpages, (x)html pages, and XML FO files which can be processed with passivetex. This is much faster than using jadetex for everything. This patch also reduces the number of kernel-specific scripts that are needed to generate documentation. Signed-off-by:
-
Jeff Garzik authored
As the author of tulip-user and via-audio docbooks, I can say that they are out of date and should be deleted. Signed-off-by:
-
Rich Walker authored
Signed-off-by:
-
Martin Waitz authored
Some KernelDoc descriptions are updated to match the current code. No code changes. Signed-off-by:
-
Martin Waitz authored
This fix is needed to create valid XML. Signed-off-by:
-
