- 09 Jan, 2006 40 commits
-
-
Dan Williams authored
This patch allows ipw2100 driver to advertise the WPA-related encryption options that it does really support. It's necessary to work correctly with NetworkManager and other programs that actually check driver & card capabilities. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Denis Vlasenko authored
These warnings are emitted if non-modular network drivers are built. Fixes just move cleanup_card() definitions into #ifdef MODULE region. /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/wd.c:131: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/3c503.c:152: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ne.c:216: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp.c:106: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp-plus.c:142: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/smc-ultra.c:172: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/e2100.c:144: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/es3210.c:159: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lne390.c:149: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lance.c:313: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ac3200.c:127: warning: 'cleanup_card' defined but not used Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Ayaz Abdulla authored
This contains a bug fix for large buffers. Originally, if a tx buffer to be sent was larger then the maximum size of the tx descriptor, it would overwrite other control bits. In this patch, the buffer is split over multiple descriptors. Also, the fragments are now setup in forward order. Signed-off-by:
Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Olaf Hering authored
Remove bouncing mail address of mv643xx maintainer. Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Kenji Kaneshige authored
Fix an invalid memory reference in the e1000 driver which would cause kernel panic. Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Jeb Cramer <cramerj@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Adrian Bunk authored
"extern inline" doesn't make much sense. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Adrian Bunk authored
"extern inline" doesn't make much sense. Signed-off-by:
-
Adrian Bunk authored
This patch fixes a wrong indentation. Signed-off-by:
-
Franck authored
Add MIPS dependency for dm9000 ethernet controller. Indeed this controller is used by some embedded platforms based on MIPS CPUs. Signed-off-by:
Franck Bui-Huu <franck.bui@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Eric Paris authored
ifenslave, as of abi version 2, does not set the ip address on the slave interfaces. The documentation example however still shows that the ensalved interfaces should have the same IP as the master. The patch simply removes the lines from the example which should no longer appear. Signed-off-by:
Eric Paris <eparis@redhat.com> bonding.txt | 2 -- 1 files changed, 2 deletions(-) Signed-off-by:
-
Christoph Dworzak authored
A BIOS bug affecting some multiport tulip NICs requires an irq fixup in tulip_core.c. This has only been enabled for i686, but it is needed for x86_64 as well. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Eugene Surovegin authored
Disable TX status deferral (EMACx_MR[MWSW=001]) in half-duplex mode. I have two reports when EMAC stops transmitting when connected to a hub. TX ring debug printouts show complete mess when this happens, probably hardware collision handling doesn't work quite well in this mode. This is relevant only for SoCs with EMAC4 core (440GX, 440SP, 440SPe). Tested on 440GX. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
-
Johannes Berg authored
This patch fixes some of the ieee80211 crypto related code so that instead of having the host fully do crypto operations, the host_build_iv flag works properly (for WEP in this patch) which, if turned on, requires the hardware to do all crypto operations, but the ieee80211 layer builds the IV. The hardware also has to build the ICV. Previously, the host_build_iv flag couldn't be used at all for WEP, and not alone (with both host_decrypt and host_encrypt disabled) because the crypto algorithm wasn't assigned. This is also fixed. I have tested this patch both in host crypto mode and in hw crypto mode (with the Broadcom chipset). [resent, signing digitally caused it to be MIME-junked, sorry] Signed-Off-By:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Stephen Hemminger authored
Don't enable the pci device twice (already done in the probe routine). Propogate the error codes from pci_request_region back to initial probing. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Stephen Hemminger authored
The sk98lin driver doesn't do proper error number handling during initialization. Note: -EAGAIN is a bogus return value for hardware errors. Signed-off-by:
-
Stephen Hemminger authored
Trivial use of kzalloc. Signed-off-by:
-
Stephen Hemminger authored
Sk98lin driver error recovery on two port boards is bad. If it fails the second allocation, it will not release resources properly. Also it registers the second port in the pci driver data If second port fails, might as well go with one port. Signed-off-by:
-
Stephen Hemminger authored
Sk98lin 64bit memory handling is wrong. It doesn't set the highdma flag; i.e. the kernel always does bounce buffers. It doesn't fallback to 32 bit mask if it can't get 64 bit mask. Signed-off-by:
-
Stephen Hemminger authored
Sk98lin driver has a routine marked __init that is called from the probe code. If using pci hotplug, this could be called after the initialization so it needs to be marked __devinit. So if you hot added a sk98lin board, the kernel would crash. I don't have hot plug hardware to actually try this feat. Also, there are two routines, only called from SkGeBoardInit that can be marked __devinit. Signed-off-by:
-
-
Matt Mackall authored
This adds an option to remove vm86 support under CONFIG_EMBEDDED. Saves about 5k. This version eliminates most of the #ifdefs of the previous version and instead uses function stubs in vm86.h. Also, release_vm86_irqs is moved from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs can live together. $ size vmlinux-baseline vmlinux-novm86 text data bss dec hex filename 2920821 523232 190652 3634705 377611 vmlinux-baseline 2916268 523100 190492 3629860 376324 vmlinux-novm86 Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Matt Mackall authored
configurable support for ELF core dumps text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3325552 528912 190556 4045020 3db8dc vmlinux-no-elf add/remove: 0/8 grow/shrink: 0/0 up/down: 0/-4424 (-4424) function old new delta fill_note 32 - -32 maydump 58 - -58 dump_seek 67 - -67 writenote 180 - -180 elf_dump_thread_status 274 - -274 fill_psinfo 308 - -308 fill_prstatus 466 - -466 elf_core_dump 3039 - -3039 Signed-off-by:
-
Matt Mackall authored
Configurable 16-bit UID and friends support This allows turning off the legacy 16 bit UID interfaces on embedded platforms. text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3328268 529040 190556 4047864 3dc3f8 vmlinux From: Adrian Bunk <bunk@stusta.de> UID16 was accidentially disabled for !EMBEDDED. Signed-off-by: -
Matt Mackall authored
This adds configurable support for doublefault reporting on x86 add/remove: 0/3 grow/shrink: 0/1 up/down: 0/-13048 (-13048) function old new delta cpu_init 846 786 -60 doublefault_fn 188 - -188 doublefault_stack 4096 - -4096 doublefault_tss 8704 - -8704 Signed-off-by:
-
Matt Mackall authored
trivial: drop unused 802.3 code if we compile without IPX (originally from http://wohnheim.fh-wedel.de/~joern/software/kernel/je/25/) Signed-off-by:
-
Matt Mackall authored
uninline some file locking functions add/remove: 3/0 grow/shrink: 0/15 up/down: 256/-1525 (-1269) function old new delta locks_free_lock - 134 +134 posix_same_owner - 69 +69 __locks_delete_block - 53 +53 posix_locks_conflict 126 108 -18 locks_remove_posix 266 237 -29 locks_wake_up_blocks 121 87 -34 locks_block_on_timeout 83 47 -36 locks_insert_block 157 120 -37 locks_delete_block 62 23 -39 posix_unblock_lock 104 59 -45 posix_locks_deadlock 162 100 -62 locks_delete_lock 228 119 -109 sys_flock 338 217 -121 __break_lease 600 474 -126 lease_init 252 122 -130 fcntl_setlk64 793 649 -144 fcntl_setlk 793 649 -144 __posix_lock_file 1477 1026 -451 Signed-off-by:
-
Matt Mackall authored
uninline a couple inode.c functions add/remove: 2/0 grow/shrink: 0/5 up/down: 256/-428 (-172) function old new delta ifind - 136 +136 ifind_fast - 120 +120 ilookup5_nowait 131 80 -51 ilookup 158 71 -87 ilookup5 171 80 -91 iget_locked 190 95 -95 iget5_locked 240 136 -104 Signed-off-by:
-
Matt Mackall authored
uninline some open.c functions add/remove: 3/0 grow/shrink: 0/6 up/down: 679/-1166 (-487) function old new delta do_sys_truncate - 336 +336 do_sys_ftruncate - 317 +317 __put_unused_fd - 26 +26 put_unused_fd 57 49 -8 sys_close 150 119 -31 sys_ftruncate64 260 26 -234 sys_ftruncate 272 24 -248 sys_truncate 339 25 -314 sys_truncate64 336 5 -331 Signed-off-by:
-
Matt Mackall authored
This is a rewrite of Andi Kleen's bloat-o-meter with sorting and reporting of gainers/decliners. Sample output: add/remove: 0/8 grow/shrink: 2/0 up/down: 88/-4424 (-4336) function old new delta __copy_to_user_ll 59 103 +44 __copy_from_user_ll 59 103 +44 fill_note 32 - -32 maydump 58 - -58 dump_seek 67 - -67 writenote 180 - -180 elf_dump_thread_status 274 - -274 fill_psinfo 308 - -308 fill_prstatus 466 - -466 elf_core_dump 3039 - -3039 The summary line says: no functions added, 8 removed two functions grew, none shrunk we gained 88 bytes and lost 4424 (or -4336 net) This work was sponsored in part by CE Linux Forum Signed-off-by:
-
Jean Delvare authored
module_init functions must be tagged __init rather than __devinit; likewise, module_exit functions must be tagged __exit rather than __devexit. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Christoph Hellwig authored
This sneaked in with one of the updates. Signed-off-by:
-
Adrian Bunk authored
It's not good if caller and callee disagree regarding the type of the arguments. In this case, this could cause problems on 64bit architectures. Signed-off-by:
Armin Schindler <armin@melware.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Adrian Bunk authored
Every file should #include the headers containing the prototypes for its global functions. Signed-off-by:
-
Oleg Nesterov authored
Factor out common code for different RUSAGE_xxx cases. Don't take ->sighand->siglock in RUSAGE_SELF case, suggested by Ravikiran G Thirumalai <kiran@scalex86.org>. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Andrew Morton authored
Request the IRQ after having set everything up. Otherwise a shared interrupt at the right time can kill the machine. Found this with David Woodhouse <dwmw2@infradead.org>'s debug-shared-irqs.patch. Signed-off-by:
-
Ben Collins authored
Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Nathan Lynch authored
Use first_cpu(cpu_possible_map) for the single-thread workqueue case. We used to hardcode 0, but that broke on systems where !cpu_possible(0) when workqueue_struct->cpu_workqueue_struct was changed from a static array to alloc_percpu. Commit id bce61dd4 ("Fix hardcoded cpu=0 in workqueue for per_cpu_ptr() calls") fixed that for Ben's funky sparc64 system, but it regressed my Power5. Offlining cpu 0 oopses upon the next call to queue_work for a single-thread workqueue, because now we try to manipulate per_cpu_ptr(wq->cpu_wq, 1), which is uninitialized. So we need to establish an unchanging "slot" for single-thread workqueues which will have a valid percpu allocation. Since alloc_percpu keys off of cpu_possible_map, which must not change after initialization, make this slot == first_cpu(cpu_possible_map). Signed-off-by:
Nathan Lynch <ntl@pobox.com> Cc: <stable@kernel.org> Signed-off-by:
-
Tobias Klauser authored
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a duplicate of ARRAY_SIZE. Some trailing whitespaces are also removed. drivers/block/acsi* has been left out as it's marked BROKEN. Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Dave Jones authored
APM doesn't _need_ the PM_LEGACY junk, so remove it's dependancy from Kconfig, and ifdef the junk in the code. Whilst the ifdefs are ugly, when the legacy stuff gets ripped out so will the ifdefs. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
