- 17 Nov, 2005 8 commits
-
-
Ralf Baechle authored
Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Maciej W. Rozycki authored
Not that it's meant to be sustained for long, but from time to time it's useful to have some console... Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
The 8250 serial driver now has the ability to deal with the differences between the standard 8250 family of UARTs and their slightly strange brother on Alchemy SOCs. The loss of features is not considered an issue. Signed-off-by: -
Ralf Baechle authored
Signed-off-by:
-
- 16 Nov, 2005 21 commits
-
-
Linus Torvalds authored
-
-
David S. Miller authored
Based upon a patch by Guido Guenther <agx@sigxcpu.org>. Some of these ioctls had embedded time_t objects or pointers, so needed translation. Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Currently, the version when ENABLE_RC is defined, falls through to the end of the function without returning anything. Signed-off-by: -
Guido Guenther authored
From: Guido Guenther <agx@sigxcpu.org> - Use correct API for allocating and freeing DMA buffers. Acked-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
The vDSO functions should have the same calling convention as a syscall. Unfortunately, they currently don't set the cr0.so bit which is used to indicate an error. This patch makes them clear this bit unconditionally since all functions currently succeed. The syscall fallback done by some of them will eventually override this if the syscall fails. This also changes the symbol version of all vdso exports to make sure glibc can differenciate between old and fixed calls for existing ones like __kernel_gettimeofday. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
Building ARCH=ppc for multiplatforms with CONFIG_CHRP not set fails due to some unshielded code in xmon Signed-off-by:
-
Paul Mackerras authored
This also extends the code to handle 32-bit ELF vmlinux files as well as 64-bit ones. This is sufficient for booting on new-world 32-bit powermacs (i.e. all recent machines). Signed-off-by: -
Kumar Gala authored
page_to_virt and lowmem_page_address provided equiavlent functionality so use the more standard lowmem_page_address This also addresses build issue in ARCH=powerpc since page_to_virt() has been removed from include/asm-powerpc/page.h Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Olof Johansson authored
Hi, The previous PowerBook patch didn't contain the feature table updates for ARCH=powerpc. Here they are. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Benjamin Herrenschmidt authored
The merge of machine types broke boot with yaboot & ARCH=ppc due to the old code still retreiving the old-syle machine type passed in by yaboot. This patch fixes it by translating those old numbers. Since that whole mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the new prom_init that the merged architecture now uses for both ppc32 and ppc64 (after 2.6.15) Signed-off-by:
-
Guido Guenther authored
ever since suspend to disk works I had the problem that headphone (un)plugging doesn't get detected properly anymore after the first resume. Reloading the module worked around this ever since, however the real cause of the problem was that after a resume the driver only got interrupts on "unplug" not on "plug". Reactivating the headphone status interrupt in tumbler_resume fixes this. This shouldn't cause any trouble with software suspend, but it would be nice if somebody could confirm this: Signed-off-by:
Guido Guenther <agx@sigxcpu.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
I discovered that in some cases (PowerMac for example) we wouldn't properly map the PCI IO space on recent kernels. In addition, the code for initializing PCI host bridges was scattered all over the place with some duplication between platforms. This patch fixes the problem and does a small cleanup by creating a pcibios_alloc_controller() in pci_64.c that is similar to the one in pci_32.c (just takes an additional device node argument) that takes care of all the grunt allocation and initialisation work. It should work for both boot time and dynamically allocated PHBs. Signed-off-by:
-
Michael Ellerman authored
Add a few more missing includes of udbg.h Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
Somewhere we lost the include of udbg.h in lmb.c. While we're there, add a DBG macro like every other file has and use it in lmb_dump_all(). Signed-off-by:
-
Benjamin Herrenschmidt authored
My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by:
-
Marcelo Tosatti authored
Currently 8xx fails to boot due to endless pagefaults. Seems the bug is exposed by the change which avoids flushing the TLB when not necessary (in case the pte has not changed), introduced recently: __handle_mm_fault(): entry = pte_mkyoung(entry); if (!pte_same(old_entry, entry)) { ptep_set_access_flags(vma, address, pte, entry, write_access); update_mmu_cache(vma, address, entry); lazy_mmu_prot_update(entry); } else { /* * This is needed only for protection faults but the arch code * is not yet telling us if this is a protection fault or not. * This still avoids useless tlb flushes for .text page faults * with threads. */ if (write_access) flush_tlb_page(vma, address); } The "update_mmu_cache()" call was unconditional before, which caused the TLB to be flushed by: if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { if (vma->vm_mm == current->active_mm) { #ifdef CONFIG_8xx /* On 8xx, cache control instructions (particularly * "dcbst" from flush_dcache_icache) fault as write * operation if there is an unpopulated TLB entry * for the address in question. To workaround that, * we invalidate the TLB here, thus avoiding dcbst * misbehaviour. */ _tlbie(address); #endif __flush_dcache_icache((void *) address); } else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } Which worked to due to pure luck: PG_arch_1 was always unset before, but now it isnt. The root of the problem are the changes against the 8xx TLB handlers introduced during v2.6. What happens is the TLBMiss handlers load the zeroed pte into the TLB, causing the TLBError handler to be invoked (thats two TLB faults per pagefault), which then jumps to the generic MM code to setup the pte. The bug is that the zeroed TLB is not invalidated (the same reason for the "dcbst" misbehaviour), resulting in infinite TLBError faults. The "two exception" approach requires a TLB flush (to nuke the zeroed TLB) at each PTE update for correct behaviour: Signed-off-by:Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by:
-
Linus Torvalds authored
-
Paul Mackerras authored
This patch should fix the crashes we have been seeing on 64-bit powerpc systems with a memory hole when sparsemem is enabled. I'd appreciate it if people who know more about NUMA and sparsemem than me could look over it. There were two bugs. The first was that if NUMA was enabled but there was no NUMA information for the machine, the setup_nonnuma() function was adding a single region, assuming memory was contiguous. The second was that the loops in mem_init() and show_mem() assumed that all pages within the span of a pgdat were valid (had a valid struct page). I also fixed the incorrect setting of num_physpages that Mike Kravetz pointed out. Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
KOVACS Krisztian authored
Although the comment around the allocation code tells us that the layer-3 specific protocol tables will be freed when cleaning up, they aren't. And this makes nfsim complain loudly... Signed-off-by:
KOVACS Krisztian <hidden@balabit.hu> Signed-off-by:
Harald Welte <laforge@netfilter.org> Signed-off-by:
-
KOVACS Krisztian authored
Fix nf_conntrack statistics proc file removal. Looks like the old bug was forward-ported from ip_conntrack. :-] Signed-off-by:
-
- 15 Nov, 2005 11 commits
-
-
Chen, Kenneth W authored
Our performance validation on 2.6.15-rc1 caught a disastrous performance regression on ia64 with netperf (-98%) and volanomark (-58%) compares to previous kernel version 2.6.14-git7. See the following chart (result group 1 & 2). http://kernel-perf.sourceforge.net/results.machine_id=26.html We have root caused it to commit 64c7c8f8 This changeset broke the ia64 task resched notification. In sched.c:resched_task(), a reschedule IPI is conditioned upon TIF_POLLING_NRFLAG. However, the above changeset unconditionally set the polling thread flag for idle tasks regardless whether pal_halt_light is in use or not. As a result, resched IPI is not sent from resched_task(). And since the default behavior on ia64 is to use pal_halt_light, we end up delaying the rescheduling task until next timer tick, and thus cause the performance regression. This fixes the performance bug. I'm glad our performance suite is turning up bad performance bug like this in time. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Signed-off-by:
-
Stephen Hemminger authored
From Joe Perches Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Russell King authored
This avoids a BUG_ON with kref.c when SA1111 tries to register a driver with an unregistered bus type. Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Jeff Garzik authored
- Fix a regression in command completion, which prevented the restart of the DMA engine after the device throws an error. - Pack more hardware info into the port-reset error message. - Promote "welcome to our timeout" message from debug msg to normal printk.
-
Dave Jones authored
Something I've found handy countless times when users do this.. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Ben Collins authored
Picked from the ubuntu-2.6 tree The change in location for ll_rw_blk.c from drivers/block/ to block/ caused failure to generate documentation. Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Grant Coady authored
drivers/block/cciss_scsi.c:264: warning: `print_bytes' defined but not used drivers/block/cciss_scsi.c:298: warning: `print_cmd' defined but not used Signed-off-by:
Grant Coady <gcoady@gmail.com> Acked-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Miles Bader <miles@gnu.org> Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
