- 12 Jul, 2007 40 commits
-
-
Lucy McCoy authored
Add support for Keyspan adapters: USA-49WG and USA-28XG Signed-off-by:
Lucy P. McCoy <lucy@keyspan.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Simon Arlott authored
This changes the format of unknown status values to be less verbose and uses an array instead of several different snprintf calls. Since only enum values are assigned to it, poll_state is changed from int to enum. Use abs() for dB values instead of two almost identical return lines. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Acked-by:
Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by:
-
Stefan Roese authored
This patch implements supports for EHCI controllers whose in-memory data structures are represented in big-endian format. This is needed (unfortunately) for the AMCC PPC440EPx SoC EHCI controller; the EHCI spec doesn't specify little-endian format, although that's what most other implementations use. The guts of the patch are to introduce the hc32 type and change all references from le32 to hc32. All access routines are converted from cpu_to_le32(...) to cpu_to_hc32(ehci, ...) and similar for the other "direction". (This is the same approach used with OHCI.) David fixed: Whitespace fixes; refresh against ehci cpufreq patch; move glue for that PPC driver to the patch adding it; fix free symbol capture bugs in modified "constant" macros; and make "hc32" etc be "le32" unless we really need the BE options, so "sparse" can do some real good. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Stuart_Hayes@Dell.com authored
EHCI controllers that don't cache enough microframes can get MMF errors when CPU frequency changes occur between the start and completion of split interrupt transactions, due to delays in reading main memory (caused by CPU cache snoop delays). This patch adds a cpufreq notifier to the EHCI driver that will inactivate split interrupt transactions during frequency transitions. It was tested on Intel ICH7 and Serverworks/Broadcom HT1000 EHCI controllers. Signed-off-by:
Stuart Hayes <stuart_hayes@dell.com> Signed-off-by:
-
Oliver Neukum authored
this implements generic support for suspend/resume for usb serial. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Chandra Seetharaman authored
This patch supports LSI/Engenio devices in RDAC mode. Like dm-emc it requires userspace support. In your multipath.conf file you must have: path_checker rdac hardware_handler "1 rdac" prio_callout "/sbin/mpath_prio_tpc /dev/%n" And you also then must have a updated multipath tools release which has rdac support. Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Brassow authored
When writing to a mirror, the log must be updated first. Failure to update the log could result in the log not properly reflecting the state of the mirror if the machine should crash. We change the return type of the rh_flush function to give us the ability to check if a log write was successful. If the log write was unsuccessful, we fail the writes to avoid the case where the log does not properly reflect the state of the mirror. A follow-up patch - which is dependent on the ability to requeue I/O's to core device-mapper - will requeue the I/O's for retry (allowing the mirror to be reconfigured.) Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Jonathan Brassow authored
Device-mapper mirroring currently takes a best effort approach to recovery - failures during mirror synchronization are completely ignored. This means that regions are marked 'in-sync' and 'clean' and removed from the hash list. Future reads and writes that query the region will incorrectly interpret the region as in-sync. This patch handles failures during the recovery process. If a failure occurs, the region is marked as 'not-in-sync' (aka RH_NOSYNC) and added to a new list 'failed_recovered_regions'. Regions on the 'failed_recovered_regions' list are not marked as 'clean' upon removal from the list. Furthermore, if the DM_RAID1_HANDLE_ERRORS flag is set, the region is marked as 'not-in-sync'. This action prevents any future read-balancing from choosing an invalid device because of the 'not-in-sync' status. If "handle_errors" is not specified when creating a mirror (leaving the DM_RAID1_HANDLE_ERRORS flag unset), failures will be ignored exactly as they would be without this patch. This is to preserve backwards compatibility with user-space tools, such as 'pvmove'. However, since future read-balancing policies will rely on the correct sync status of a region, a user must choose "handle_errors" when using read-balancing. Signed-off-by:
-
Jonathan Brassow authored
Add ratelimit extension to dm logging macros. Signed-off-by:
-
Stefan Bader authored
This patch causes device-mapper to reject any barrier requests. This is done since most of the targets won't handle this correctly anyway. So until the situation improves it is better to reject these requests at the first place. Since barrier requests won't get to the targets, the checks there can be removed. Cc: stable@kernel.org Signed-off-by:
Stefan Bader <shbader@de.ibm.com> Signed-off-by:
-
Jonathan Brassow authored
A clear_region function is permitted to block (in practice, rare) but gets called in rh_update_states() with a spinlock held. The bits being marked and cleared by the above functions are used to update the on-disk log, but are never read directly. We can perform these operations outside the spinlock since the bits are only changed within one thread viz. - mark_region in rh_inc() - clear_region in rh_update_states(). So, we grab the clean_regions list items via list_splice() within the spinlock and defer clear_region() until we iterate over the list for deletion - similar to how the recovered_regions list is already handled. We then move the flush() call down to ensure it encapsulates the changes which are done by the later calls to clear_region(). Signed-off-by:
-
Milan Broz authored
Allow invalid snapshots to be activated instead of failing. This allows userspace to reinstate any given snapshot state - for example after an unscheduled reboot - and clean up the invalid snapshot at its leisure. Cc: stable@kernel.org Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Milan Broz authored
Process persistent exception store metadata IOs in a separate thread. A snapshot may become invalid while inside generic_make_request(). A synchronous write is then needed to update the metadata while still inside that function. Since the introduction of md-dm-reduce-stack-usage-with-stacked-block-devices.patch this has to be performed by a separate thread to avoid deadlock. Signed-off-by:
-
Jun'ichi Nomura authored
bio_alloc_bioset() will return NULL if 'num_vecs' is too large. Use bio_get_nr_vecs() to get estimation of maximum number. Cc: stable@kernel.org Signed-off-by:
"Jun'ichi Nomura" <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Milan Broz authored
Fix mirror status line broken in dm-log-report-fault-status.patch: - space missing between two words - placeholder ("0") required for compatibility with a subsequent patch - incorrect offset parameter Cc: stable@kernel.org Signed-off-by: -
Alasdair G Kergon authored
Remove explicit module name from messages as the macro now includes it automatically. Signed-off-by:
-
Alasdair G Kergon authored
Use setup_timer(). Replace semaphore with mutex. Signed-off-by:
-
Alasdair G Kergon authored
Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Alasdair G Kergon authored
Remove dubious prefetch from bio_list_for_each() macro. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (50 commits) [ARM] sa1100: remove boot time RTC initialisation [ARM] sa1100: stop doing our own rtc management over suspend [ARM] 4474/1: Do not check the PSR_F_BIT in valid_user_regs [ARM] 4473/2: Take the HWCAP definitions out of the elf.h file [ARM] pxa: move platform devices to separate header file [ARM] pxa: move device registration into CPU-specific file [ARM] pxa: remove boot time RTC initialisation [ARM] pxa: stop doing our own rtc management over suspend [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq() [ARM] 4440/1: PXA: enable the checking of ICIP2 for IRQs [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler() [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio() [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low() [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare() [ARM] pxa: move pm_ops structure into CPU specific files [ARM] pxa: introduce cpu_is_pxaXXX macros [ARM] pxa: remove MMC register defines from pxa-regs.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: security: unexport mmap_min_addr SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel security: Protection for exploiting null dereference using mmap SELinux: Use %lu for inode->i_no when printing avc SELinux: allow preemption between transition permission checks selinux: introduce schedule points in policydb_destroy() selinux: add selinuxfs structure for object class discovery selinux: change sel_make_dir() to specify inode counter. selinux: rename sel_remove_bools() for more general usage. selinux: add support for querying object classes and permissions from the running policy
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix sysfs_create_file return value handling [CPUFREQ] ondemand: fix tickless accounting and software coordination bug [CPUFREQ] ondemand: add a check to avoid negative load calculation [CPUFREQ] Keep userspace governor quiet when it is not being used [CPUFREQ] Longhaul - Proper register access [CPUFREQ] Kconfig powernow-k8 driver should depend on ACPI P-States driver [CPUFREQ] Longhaul - Replace ACPI functions with direct I/O [CPUFREQ] Longhaul - Remove duplicate multipliers [CPUFREQ] Longhaul - Embedded "conservative" [CPUFREQ] acpi-cpufreq: Proper ReadModifyWrite of PERF_CTL MSR [CPUFREQ] check return value of sysfs_create_file [CPUFREQ] Longhaul - Check ACPI "BM DMA in progress" bit [CPUFREQ] Longhaul - Move old_ratio to correct place [CPUFREQ] Longhaul - VT8237 support [CPUFREQ] Longhaul - Use all kinds of support [CPUFREQ] powernow-k8: clarify number of cores.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] Hand off AGP maintainence.
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Support multiple CPUs going through OS_MCA [IA64] silence GCC ia64 unused variable warnings [IA64] prevent MCA when performing MMIO mmap to PCI config space [IA64] add sn_register_pmi_handler oemcall [IA64] Stop bit for brl instruction [IA64] SN: Correct ROM resource length for BIOS copy [IA64] Don't set psr.ic and psr.i simultaneously
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits) sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes sysfs: make directory dentries and inodes reclaimable sysfs: implement sysfs_get_dentry() sysfs: move sysfs_drop_dentry() to dir.c and make it static sysfs: restructure add/remove paths and fix inode update sysfs: use sysfs_mutex to protect the sysfs_dirent tree sysfs: consolidate sysfs spinlocks sysfs: make kobj point to sysfs_dirent instead of dentry sysfs: implement sysfs_find_dirent() and sysfs_get_dirent() sysfs: implement SYSFS_FLAG_REMOVED flag sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags sysfs: make sysfs_drop_dentry() access inodes using ilookup() sysfs: Fix oops in sysfs_drop_dentry on x86_64 sysfs: use singly-linked list for sysfs_dirent tree sysfs: slim down sysfs_dirent->s_active sysfs: move s_active functions to fs/sysfs/dir.c sysfs: fix root sysfs_dirent -> root dentry association sysfs: use iget_locked() instead of new_inode() sysfs: reorganize sysfs_new_indoe() and sysfs_create() sysfs: fix parent refcounting during rename and move ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (21 commits) libata: remove irq_on from ata_bus_reset() and ata_std_postreset() ata_piix: kill incorrect invalid map value warning libata: add another Maxtor drive with broken NCQ to the list [libata] sata_mv: Fix and clean up per-chip-generation tests [libata] sata_mv: Convert to new exception handling (EH) infrastructure [libata] sata_mv: minor bug fixes, enhancements, and cleanups (prep for new EH) [libata] sata_mv: Minor cleanups and renaming, preparing for new EH & NCQ libata-link: add PMP related ATA constants libata-link: separate out ata_eh_handle_dev_fail() pata_hpt3x3: fix DMA Kconfig option to actually have a hope of working Add Hitachi HDS7250SASUN500G 0621KTAWSD to NCQ blacklist pata_scc.c: Workaround for errata A308 libata: add FUJITSU MHV2080BH to NCQ blacklist pata_hpt3x3: major reworking and testing libata: clean up horkage handling libata: quirk IOMEGA ZIP 250 ATAPI FLOPPY libata: simplify PCI legacy SFF host handling pata_mpc52xx: suspend/resume support sata_promise: SATA hotplug support, take 2 pata_sis: FIFO whack ...
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits) [TG3]: Update version to 3.78. [TG3]: Add missing NVRAM strapping. [TG3]: Enable auto MDI. [TG3]: Fix the polarity bit. [TG3]: Fix irq_sync race condition. [NET_SCHED]: ematch: module autoloading [TCP]: tcp probe wraparound handling and other changes [RTNETLINK]: rtnl_link: allow specifying initial device address [RTNETLINK]: rtnl_link API simplification [VLAN]: Fix MAC address handling [ETH]: Validate address in eth_mac_addr [NET]: Fix races in net_rx_action vs netpoll. [AF_UNIX]: Rewrite garbage collector, fixes race. [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876) [NET]: Make all initialized struct seq_operations const. [UDP]: Fix length check. [IPV6]: Remove unneeded pointer idev from addrconf_cleanup(). [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options. [IPV6]: Do not send RH0 anymore. ... Fixed up trivial conflict in Documentation/feature-removal-schedule.txt manually. Signed-off-by: -
Russell King authored
-
Russell King authored
The RTC library code contains everything necessary to set the system time from the RTC; for similar reasons as the previous commit, it's far better to let the RTC library code sort this out rather than implement something which might not be appropriate for everyone. Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Remove the RTC management over a suspend/resume cycle. As per the corresponding PXA patch, the RTC library code handles updating system time on resume. Signed-off-by: -
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Rename PC speaker code [MIPS] Don't use genrtc. [MIPS] Remove unused time.c for swarm [MIPS] Sparse: Use NULL for pointer [MIPS] Fix a sparse warning in arch/mips/pci/pci.c [MIPS] SMTC: Interrupt mask backstop hack [MIPS] separate platform_device registration for VR41xx RTC [MIPS] Separate platform_device registration for VR41xx GPIO [MIPS] MIPSsim: Fix build. [MIPS] separate platform_device registration for VR41xx serial interface [MIPS] Include cacheflush.h in uncache.c [MIPS] Cleanup tlbdebug.h [MIPS] Change names of local variables to silence sparse (part 2) [MIPS] Workaround for a sparse warning in include/asm-mips/io.h [MIPS] RM: Use only phyiscal address for 82596 and 53c710 [MIPS] Hydrogen3: Remove remaining bits of code. [MIPS] DEC: Fix modpost warning. Revert "[MIPS] DEC: Fix modpost warning." [MIPS] Fix resume for 64K page size on R4000 class processors.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin serial driver: supporting BF548-EZKIT serial port Video Console: Blackfin doesnt support VGA console Blackfin arch: Add peripheral io API to gpio header file Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig Blackfin arch: extract the entry point from the linked kernel Blackfin arch: clean up some coding style issues Blackfin arch: combine the common code of free_initrd_mem and free_initmem Blackfin arch: Add Support for Peripheral PortMux and resouce allocation Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values Blackfin arch: fix bug set dma_address properly in dma_map_sg Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch Blackfin arch: scrub dead code Blackfin arch: Fix Warning add some defines in BF54x header file Blackfin arch: add BF54x missing GPIO access functions Blackfin arch: Some memory and code optimizations - Fix SYS_IRQS Blackfin arch: Enable BF54x PIN/GPIO interrupts ...
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (26 commits) i2c-rpx: Remove i2c-mpc: work around missing-9th-clock-pulse bug i2c: New PMC MSP71xx TWI bus driver i2c-savage4: Delete many unused defines i2c/tsl2550: Speed up initialization i2c: New bus driver for the TAOS evaluation modules i2c-i801: Use the internal 32-byte buffer on ICH4+ i2c-i801: Various cleanups i2c: Add support for the TSL2550 i2c-pxa: Support new-style I2C drivers i2c-gpio: Make some internal functions static i2c-gpio: Add support for new-style clients i2c-iop3xx: Switch to static adapter numbering i2c-sis5595: Resolve resource conflict with sis5595 matroxfb: Clean-up i2c header inclusions i2c-nforce2: Add support for SMBus block transactions i2c-mpc: Use i2c_add_numbered_adapter i2c-mv64xxx: Use i2c_add_numbered_adapter i2c-piix4: Add support for the ATI SB700 i2c: New DS1682 chip driver ...
-
Albert Lee authored
It seems irq_on() in ata_bus_reset() and ata_std_postreset() are leftover of the EDD reset. Remove them. Signed-off-by:
Albert Lee <albertcc@tw.ibm.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
The last two slots of MAP 00b of ich6m was incorrectly marked as reserved. This is left over from converting the entry to allow 00b. This causes no real problem. It only makes the driver print annoying warning message. Fix it. [patch also proferred by Pierre Tardy at the end of 2006 -jg] Signed-off-by:
Tejun Heo <htejun@gmail.com> -- drivers/ata/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by:
-
Chuck Ebbert authored
Add another Maxtor 6B200M0 drive with broken NCQ to the list. Signed-off-by:
Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Jeff Garzik authored
Due to a mistake in test logic, Gen-IIE chips were being treated as Gen-II chips in some cases. Fix this, and in the process, clean up IS_50XX/IS_60XX tests to the more uniform IS_GEN_{I,II,IIE} tests. Signed-off-by: -
Jeff Garzik authored
This makes hotplug, NCQ, etc. possible, and removes one of the few remaining old-EH drivers. Signed-off-by: -
Jeff Garzik authored
* Continue replacing "CONSTANT & var" tests with "var & CONSTANT" * Don't clear EDMA_CFG_NCQ_GO_ON_ERR on Gen-IIE, where that bit does not exist * Set I/O Id field in descriptor, where present. Appears to work fine on all versions, even though queueing is still disabled. * call pci_set_mwi(), to (a) make sure cacheline size is set properly, and (b) enable MWI transactions * Remove never-used handling of coalescing interrupt bits (these events are always masked) Signed-off-by:
-
