- 10 Jan, 2006 40 commits
-
-
Ville Syrjälä authored
Clean up VT and GT chip descriptions. All B revision VT chips are called 264VT3. Verified from pictures of the chips as the specs are a bit unlear in this. GT revision B1 is Rage II, B2 is Rage II+. Specs and chip pictures seem to agree. VT revision A4 is 264VT2. Revision A3 is probably a plain 264VT. Signed-off-by:
Ville Syrjälä <syrjala@sci.fi> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ville Syrjälä authored
Clean up Rage XL/XC chip descriptions. Signed-off-by:
-
Ville Syrjälä authored
Force blanking signal and disable display requests when blanked. Don't disable LCD backlight with FB_BLANK_NORMAL. Signed-off-by:
-
Ville Syrjälä authored
Set ECP (scaler/overlay clock) divider. The limits were taken from the XFree86 ati driver. Signed-off-by:
-
Ville Syrjälä authored
The overlay on 3D Rage LT Pro doesn't work correctly if stretching is enabled when using only a CRT. Signed-off-by:
-
Ville Syrjälä authored
Fix interlaced display modes. Signed-off-by:
-
Ville Syrjälä authored
CRTC_FIFO_LWM was incorrectly masked. Signed-off-by:
-
Ville Syrjälä authored
Don't complain about invalid modes when FB_ACTIVATE_TEST is used. Signed-off-by:
-
Ville Syrjälä authored
Fix some spelling mistakes. Signed-off-by:
-
Antonino A. Daplas authored
Remove error checking and updating from vga16fb_pan_display. This is guaranteed to be done by the core layer. Signed-off-by:
-
Antonino A. Daplas authored
Fix vesafb hang when scroll mode is REDRAW. Signed-off-by:
-
Antonino A. Daplas authored
Remove error checking from vesafb_pan_display. This is guaranteed to be done by the core layer. Signed-off-by:
-
Antonino A. Daplas authored
Remove error checking and updating from savagefb_pan_display. This is guaranteed to be done by the core layer. Signed-off-by:
-
Antonino A. Daplas authored
Remove error checking and updating from rivafb_pan_display. This is guaranteed to be done by the core layer. Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts - make setcolreg return success if regno > 15, but don't do anything - use framebuffer_alloc/framebuffer_release to allocate/free memory Signed-off-by:
-
Antonino A. Daplas authored
CONFIG_ATYFB_XL_INIT option is broken for a long time. It will always cause a kernel hang. Since no one has fixed this problem for some time now, remove it from atyfb. Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts - move memory for pseudo_palette inside struct tdfxfb_par - whitespace changes Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts - move memory for pseudo_palette inside struct pm2fb_par Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts - move memory for pseudo_palette inside struct neofb_par Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts - use framebuffer_alloc/framebuffer_release to allocate/free memory - the pseudo_palette is always u32 regardless of bpp if using generic drawing functions Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Antonino A. Daplas authored
- remove unneeded casts - the pseudo_palette, if using the generic drawing functions, must always be u32 regardless of the bpp - use framebuffer_alloc/framebuffer_release to allocate memory Signed-off-by:
-
Antonino A. Daplas authored
- convert to platform device Signed-off-by:
-
Antonino A. Daplas authored
- allocate just enough space for the pseudo_palette Signed-off-by:
-
Antonino A. Daplas authored
- remove redundant casts Signed-off-by:
-
Antonino A. Daplas authored
- remove redundant casts Signed-off-by:
-
Antonino A. Daplas authored
- remove redundant casts - remove symbol_get/symbol_put Signed-off-by:
-
Antonino A. Daplas authored
- remove redundant casts - add mode_option to module parameter Signed-off-by:
-
Matthew Garrett authored
What
-
Jean Delvare authored
The I2C bus of the S3 Savage2000 is supposed to work the same way the Savage4 does. At least, the legacy i2c-savage4 driver handled both devices the same way. I do not have the hardware to test this, so testers are welcome. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Antonino A. Daplas authored
matroxfb has no need for struct display and fbcon.h. Remove. Signed-off-by:
-
Antonino A. Daplas authored
Store struct display when setting all vc's. Otherwise, fbcon's behavior becomes undefined, such as malpositioning of the cursor. Signed-off-by:
-
Alessandro Zummo authored
Assign nvidiafb's i2c busses a better name. Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Antonino A. Daplas authored
Do not pass the structure display since fbcon is already keeping the pointer to the current display. Signed-off-by:
-
Richard Knutsson authored
Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
From: Bugzilla Bug 5351 "After resuming from S3 (suspended while in X), the LCD panel stays black . However, the laptop is up again, and I can SSH into it from another machine. I can get the panel working again, when I first direct video output to the CRT output of the laptop, and then back to LCD (done by repeatedly hitting Fn+F5 buttons on the Toshiba, which directs output to either LCD, CRT or TV) None of this ever happened with older kernels." This bug is due to the recently added vesafb_blank() method in vesafb. It works with CRT displays, but has a high incidence of problems in laptop users. Since CRT users don't really get that much benefit from hardware blanking, drop support for this. Signed-off-by:
-
Ingo Molnar authored
Convert sleep_on() to wait_event_timeout(). Probably safe with the BKL but could be racy once BKL use in NFS-client is gone. Acked-by:
Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Oleg Drokin authored
If we have found aliased dentry that we return, inode reference is not dropped and inode is not attached anywhere, so it seems the reference to inode is leaked in that case. Cc: Trond Myklebust <trond.myklebust@fys.uio.no>, Cc: <viro@parcelfarce.linux.theplanet.co.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jiri Slaby authored
fops is used for module handling with ownership. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Jiri Slaby authored
video_device.priv is not allowed to touch and it will be actually removed in near future. Use video_get_drvdata() instead. Signed-off-by:
-
