- 09 Jul, 2007 36 commits
-
-
akpm@linux-foundation.org authored
fs/gfs2/inode.c: In function 'gfs2_lookupi': fs/gfs2/inode.c:392: warning: 'error' may be used uninitialized in this function Looks like a real bug to me. Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
Under certain circumstances its possible (though rather unlikely) that inodes which were unlinked by one node while still open on another might get "lost" in the sense that they don't get deallocated if the node which held the inode open crashed before it was unlinked. This patch adds the recovery code which allows automatic deallocation of the inode if its found during block allocation (the sensible time to look for such inodes since we are scanning the rgrp's bitmaps anyway at this time, so it adds no overhead to do this). Since the inode will have had its i_nlink set to zero, all we need to trigger recovery is a lookup and an iput(), and the normal deallocation code takes care of the rest. Signed-off-by: -
Robert Peterson authored
This patch fixes bug 243131: Can't mount GFS2 file system on AoE device. When using AoE devices with lock_nolock, there is no locking table, so gfs2 (and gfs1) uses the superblock s_id. This turns out to be the device name in some cases. In the case of AoE, the device contains a slash, (e.g. "etherd/e1.1p2") which is an invalid character when we try to register the table in sysfs. This patch replaces the "/" with underscore. Rather than add a new variable to the stack, I'm just reusing a (char *) variable that's no longer used: table. This code has been tested on the failing system using a RHEL5 patch. The upstream code was tested by using gfs2_tool sb to interject a "/" into the table name of a clustered gfs2 file system. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steven Whitehouse authored
This fixes a bug in the ordering of operations in the error path of createi. Its not valid to do an iput() when holding the inode's glock since the iput() will (in this case) result in delete_inode() being called which needs to grab the lock itself. This was causing the recursive lock checking code to trigger. Signed-off-by: -
Steven Whitehouse authored
A typo caused us to pass a NULL pointer when renaming directories. It was accidentally introduced in: [GFS2] Clean up inode number handling Signed-off-by: -
Patrick Caulfield authored
Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace. This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL. (This updated version of the patch uses gfp_t for ls_allocation.) Signed-Off-By:
Patrick Caulfield <pcaulfie@redhat.com> Signed-Off-By:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Josef Bacik authored
This is a fix for the patch 021d2ff3a08019260a1dc002793c92d6bf18afb6 I left off a dlm_hold_rsb which causes the box to panic if you try to use debugfs. This patch fixes the problem. Sorry about that, Signed-off-by:
Josef Bacik <jwhiter@redhat.com> Signed-off-by:
-
Steven Whitehouse authored
This adds a nanosecond timestamp feature to the GFS2 filesystem. Due to the way that the on-disk format works, older filesystems will just appear to have this field set to zero. When mounted by an older version of GFS2, the filesystem will simply ignore the extra fields so that it will again appear to have whole second resolution, so that its trivially backward compatible. Signed-off-by: -
Steven Whitehouse authored
This patch fixes some sign issues which were accidentally introduced into the quota & statfs code during the endianess annotation process. Also included is a general clean up which moves all of the _host structures out of gfs2_ondisk.h (where they should not have been to start with) and into the places where they are actually used (often only one place). Also those _host structures which are not required any more are removed entirely (which is the eventual plan for all of them). The conversion routines from ondisk.c are also moved into the places where they are actually used, which for almost every one, was just one single place, so all those are now static functions. This also cleans up the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__. The net result is a reduction of about 100 lines of code, many functions now marked static plus the bug fixes as mentioned above. For good measure I ran the code through sparse after making these changes to check that there are no warnings generated. This fixes Red Hat bz #239686 Signed-off-by: -
Benjamin Marzinski authored
This is a patch for the first three issues of RHBZ #238162 The first issue is that when you allocate a new page for a file, it will not start off uptodate. This makes sense, since you haven't written anything to that part of the file yet. Unfortunately, gfs2_pin() checks to make sure that the buffers are uptodate. The solution to this is to mark the buffers uptodate in gfs2_commit_write(), after they have been zeroed out and have the data written into them. I'm pretty confident with this fix, although it's not completely obvious that there is no problem with marking the buffers uptodate here. The second issue is simply that you can try to pin a data buffer that is already on the incore log, and thus, already pinned. This patch checks to see if this buffer is already on the log, and exits databuf_lo_add() if it is, just like buf_lo_add() does. The third issue is that gfs2_log_flush() doesn't do it's block accounting correctly. Both metadata and journaled data are logged, but gfs2_log_flush() only compares the number of metadata blocks with the number of blocks to commit to the ondisk journal. This patch also counts the journaled data blocks. Signed-off-by:
Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by:
-
Patrick Caulfield authored
This patch clears the user_data of active sockets as part of cleanup. This prevents any late-arriving data from trying to add jobs to the work queue while we are tidying up. Signed-Off-By:
-
Steven Whitehouse authored
The number of blocks which we reserve in the log at the start of each transaction needs to depends upon the block size since the overhead is related to the number of "pointers" which can be fitted into a single block. This relates to Red Hat bz #240435 Signed-off-by: -
Abhijith Das authored
This patch fixes a bug where gfs2 was writing update quota usage information to the wrong location in the quota file. Signed-off-by:
Abhijith Das <adas@redhat.com> Signed-off-by:
-
David Teigland authored
Display the initial value of the "protocol" config value in configfs. The default value has always been 0 in the past anyway, so it's always appeared to be correct. Signed-off-by:
-
David Teigland authored
Add a new debugfs file that dumps a compact list of mastered locks. This will be used by a userland daemon to collect state for deadlock detection. Also, for the existing function that prints all lock state, lock the rsb before going through the lock lists since they can be changing in the course of normal dlm activity. Signed-off-by:
-
David Teigland authored
Add a function that can be used through libdlm by a system daemon to cancel another process's deadlocked lock. A completion ast with EDEADLK is returned to the process waiting for the lock. Signed-off-by:
-
David Teigland authored
Various fixes related to the new timeout feature: - add_timeout() missed setting TIMEWARN flag on lkb's when the TIMEOUT flag was already set - clear_proc_locks should remove a dead process's locks from the timeout list - the end-of-life calculation for user locks needs to consider that ETIMEDOUT is equivalent to -DLM_ECANCEL - make initial default timewarn_cs config value visible in configfs - change bit position of TIMEOUT_CANCEL flag so it's not copied to a remote master node - set timestamp on remote lkb's so a lock dump will display the time they've been waiting Signed-off-by:
-
Steven Whitehouse authored
A one liner fix which got missed from the earlier patches. Signed-off-by: -
Fabio Massimo Di Nitto authored
2e8701a15cd6f7c95e74d6660615a69b09e453ef commit breaks libgfs2 build: gcc -Wall -I/usr/src/ubuntu/mypkgs/rhcluster/cluster/config -DHELPER_PROGRAM -D_FILE_OFFSET_BITS=64 -DGFS2_RELEASE_NAME=\"2.0\" -ggdb -I/usr/include -I../include -I../libgfs2 -c -o gfs2hex.o gfs2hex.c In file included from hexedit.h:22, from gfs2hex.c:27: /usr/include/linux/gfs2_ondisk.h:505: error: expected specifier-qualifier-list before ‘u32’ make[2]: *** [gfs2hex.o] Error 1 make[2]: Leaving directory `/usr/src/ubuntu/mypkgs/rhcluster/cluster/gfs2/edit' make[1]: *** [all] Error 2 make[1]: Leaving directory `/usr/src/ubuntu/mypkgs/rhcluster/cluster/gfs2' make: *** [gfs2] Error 2 Signed-off-by:Fabio Massimo Di Nitto <fabbione@ubuntu.com> Signed-off-by:
-
David Teigland authored
In the rush to get the previous patch set sent, a compilation bug I fixed shortly before sending somehow got clobbered, probably by a missed quilt refresh or something. Signed-off-by:
-
David Teigland authored
Joining the lockspace should wait for the initial round of inter-node config checks to complete before returning. This way, if there's a configuration mismatch between the joining node and the existing nodes, the join can fail and return an error to the application. Signed-off-by:
-
David Teigland authored
Fix the error path when exiting new_lockspace(). It was kfree'ing the lockspace struct at the end, but that's only valid if it exits before kobject_register occured. After kobject_register we have to let the kobject do the freeing. Signed-off-by:
-
David Teigland authored
When conversion deadlock is detected, cancel the conversion and return EDEADLK to the application. This is a new default behavior where before the dlm would allow the deadlock to exist indefinately. The DLM_LKF_NODLCKWT flag can now be used in a conversion to prevent the dlm from performing conversion deadlock detection/cancelation on it. The DLM_LKF_CONVDEADLK flag can continue to be used as before to tell the dlm to demote the granted mode of the lock being converted if it gets into a conversion deadlock. Signed-off-by:
-
David Teigland authored
Change the user/kernel device interface used by libdlm: - Add ability for userspace to check the version of the interface. libdlm can now adapt to different versions of the kernel interface. - Increase the size of the flags passed in a lock request so all possible flags can be used from userspace. - Add an opaque "xid" value for each lock. This "transaction id" will be used later to associate locks with each other during deadlock detection. - Add a "timeout" value for each lock. This is used along with the DLM_LKF_TIMEOUT flag. Also, remove a fragment of unused code in device_read(). This patch requires updating libdlm which is backward compatible with older kernels. Signed-off-by:
-
David Teigland authored
New features: lock timeouts and time warnings. If the DLM_LKF_TIMEOUT flag is set, then the request/conversion will be canceled after waiting the specified number of centiseconds (specified per lock). This feature is only available for locks requested through libdlm (can be enabled for kernel dlm users if there's a use for it.) If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then a warning message will be sent to userspace (using genetlink) after a request/conversion has been waiting for a given number of centiseconds (configurable per node). The time warnings will be used in the future to do deadlock detection in userspace. Signed-off-by:
-
David Teigland authored
Don't let dlm_scand run during recovery since it may try to do a resource directory removal while the directory nodes are changing. Signed-off-by:
-
Josef Bacik authored
This problem was originally reported against GFS6.1, but the same issue exists in upstream DLM. This patch keeps the rsb iterator assigning under the rsbtbl list lock. Each time we process an rsb we grab a reference to it to make sure it is not freed out from underneath us, and then put it when we get the next rsb in the list or move onto another list. Signed-off-by:
-
Abhijith Das authored
This patch fixes an error in the quota code where a 'struct gfs2_quota_lvb*' was being passed to gfs2_adjust_quota() instead of a 'struct gfs2_quota_data*'. Also moved 'struct gfs2_quota_lvb' from fs/gfs2/incore.h to include/linux/gfs2_ondisk.h as per Steve's suggestion. Signed-off-by:
-
Steven Whitehouse authored
This patch cleans up the inode number handling code. The main difference is that instead of looking up the inodes using a struct gfs2_inum_host we now use just the no_addr member of this structure. The tests relating to no_formal_ino can then be done by the calling code. This has advantages in that we want to do different things in different code paths if the no_formal_ino doesn't match. In the NFS patch we want to return -ESTALE, but in the ->lookup() path, its a bug in the fs if the no_formal_ino doesn't match and thus we can withdraw in this case. In order to later fix bz #201012, we need to be able to look up an inode without knowing no_formal_ino, as the only information that is known to us is the on-disk location of the inode in question. This patch will also help us to fix bz #236099 at a later date by cleaning up a lot of the code in that area. There are no user visible changes as a result of this patch and there are no changes to the on-disk format either. Signed-off-by: -
Steven Whitehouse authored
This patch removes the completion (which is rather large) from struct gdlm_lock in favour of using the wait_on_bit() functions. We don't need to add any extra fields to the structure to do this, so we save 32 bytes (on x86_64) per structure. This adds up to quite a lot when we may potentially have millions of these lock structures, Signed-off-by:
-
Robert Peterson authored
This addendum patch 2 corrects three things: 1. It fixes a stupid mistake in the previous addendum that broke gfs2. Ref: https://www.redhat.com/archives/cluster-devel/2007-May/msg00162.html 2. It fixes a problem that Dave Teigland pointed out regarding the external declarations in ops_address.h being in the wrong place. 3. It recasts a couple more %llu printks to (unsigned long long) as requested by Steve Whitehouse. I would have loved to put this all in one revised patch, but there was a rush to get some patches for RHEL5. Therefore, the previous patches were applied to the git tree "as is" and therefore, I'm posting another addendum. Sorry. Signed-off-by:
-
Nate Diller authored
Use zero_user_page() instead of open-coding it. Signed-off-by:
Nate Diller <nate.diller@gmail.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Robert Peterson authored
To avoid code redundancy, I separated out the operational "guts" into a new function called read_rindex_entry. Then I made two functions: the closer-to-original gfs2_ri_update (without the special condition checks) and gfs2_ri_update_special that's designed with that condition in mind. (I don't like the name, but if you have a suggestion, I'm all ears). Oh, and there's an added benefit: we don't need all the ugly gotos anymore. ;) This patch has been tested with gfs2_fsck_hellfire (which runs for three and a half hours, btw). Signed-off-By:
-
Robert Peterson authored
This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By:
-
Satyam Sharma authored
Fix two races in fs/dlm/config.c: (1) Grab the configfs subsystem semaphore before calling config_group_find_obj() in get_space(). This solves a potential race between get_space() and concurrent mkdir(2) or rmdir(2). (2) Grab a reference on the found config_item _while_ holding the configfs subsystem semaphore in get_comm(), and not after it. This solves a potential race between get_comm() and concurrent rmdir(2). Signed-off-by:
Satyam Sharma <ssatyam@cse.iitk.ac.in> Signed-off-by:
-
Benjamin Marzinski authored
Fix for bz #231910 When filemap_fdatawrite() is called on the inode mapping in data=ordered mode, it will add the glock to the log. In inode_go_sync(), if you do the gfs2_log_flush() before this, after the filemap_fdatawrite() call, the glock and its associated data buffers will be on the log again. This means you can demote a lock from exclusive, without having it flushed from the log. The attached patch simply moves the gfs2_log_flush up to after the filemap_fdatawrite() call. Originally, I tried moving the gfs2_log_flush to after gfs2_meta_sync(), but that caused me to trip the following assert. GFS2: fsid=cypher-36:test.0: fatal: assertion "!buffer_busy(bh)" failed GFS2: fsid=cypher-36:test.0: function = gfs2_ail_empty_gl, file = fs/gfs2/glops.c, line = 61 It appears that gfs2_log_flush() puts some of the glocks buffers in the busy state and the filemap_fdatawrite() call is necessary to flush them. This makes me worry slightly that a related problem could happen because of moving the gfs2_log_flush() after the initial filemap_fdatawrite(), but I assume that gfs2_ail_empty_gl() would catch that case as well. Signed-off-by:
-
- 08 Jul, 2007 4 commits
-
-
Linus Torvalds authored
Woo-hoo. I'm sure somebody will report a "this doesn't compile, and I have a new root exploit" five minutes after release, but it still feels good ;) Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: qd65xx: fix PIO mode selection sis5513: adding PCI-ID
-
Linus Torvalds authored
Commit 1c710c89 added the utimensat() system call, but didn't handle the case of checking for the writability of the target right, when the target was a file descriptor, not a filename. We cannot use vfs_permission(MAY_WRITE) for that case, and need to simply check whether the file descriptor is writable. The oops from using the wrong function was noticed and narrowed down by Markus Trippelsdorf. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by:
Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
-
Peter Zijlstra authored
Fix a post-2.6.21 regression. read_cache_page_async() has two invocations of mark_page_accessed() which will launch pages right onto the active list. Remove the first one, keeping the latter one. This avoids marking unwanted pages active (in the retry loop). Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
