Commit f9ba7053 authored by Venkatesh Pallipadi's avatar Venkatesh Pallipadi Committed by Linus Torvalds

[PATCH] Increase number of e820 entries hard limit from 32 to 128

The specifications that talk about E820 map doesn't have an upper limit on
the number of e820 entries.  But, today's kernel has a hard limit of 32.
With increase in memory size, we are seeing the number of E820 entries
reaching close to 32.  Patch below bumps the number upto 128.

The patch changes the location of EDDBUF in zero-page (as it comes after E820).
As, EDDBUF is not used by boot loaders, this patch should not have any effect
on bootloader-setup code interface.

Patch covers both i386 and x86-64.

Tested on:
* grub booting bzImage
* lilo booting bzImage with EDID info enabled
* pxeboot of bzImage

Side-effect:
bss increases by ~ 2K and init.data increases by ~7.5K
on all systems, due to increase in size of static arrays.
Signed-off-by: default avatarVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent be9e6870
......@@ -79,6 +79,6 @@ Offset Type Description
0x22c unsigned long ramdisk_max
0x230 16 bytes trampoline
0x290 - 0x2cf EDD_MBR_SIG_BUFFER (edd.S)
0x2d0 - 0x600 E820MAP
0x600 - 0x7ff EDDBUF (edd.S) for disk signature read sector
0x600 - 0x7eb EDDBUF (edd.S) for edd data
0x2d0 - 0xd00 E820MAP
0xd00 - 0xeff EDDBUF (edd.S) for disk signature read sector
0xd00 - 0xeeb EDDBUF (edd.S) for edd data
......@@ -164,7 +164,7 @@ ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
trampoline: call start_of_setup
.align 16
# The offset at this point is 0x240
.space (0x7ff-0x240+1) # E820 & EDD space (ending at 0x7ff)
.space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
# End of setup header #####################################################
start_of_setup:
......@@ -333,9 +333,9 @@ jmpe820:
# sizeof(e820rec).
#
good820:
movb (E820NR), %al # up to 32 entries
movb (E820NR), %al # up to 128 entries
cmpb $E820MAX, %al
jnl bail820
jae bail820
incb (E820NR)
movw %di, %ax
......
......@@ -160,7 +160,7 @@ ramdisk_max: .long 0xffffffff
trampoline: call start_of_setup
.align 16
# The offset at this point is 0x240
.space (0x7ff-0x240+1) # E820 & EDD space (ending at 0x7ff)
.space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
# End of setup header #####################################################
start_of_setup:
......@@ -412,9 +412,9 @@ jmpe820:
# sizeof(e820rec).
#
good820:
movb (E820NR), %al # up to 32 entries
movb (E820NR), %al # up to 128 entries
cmpb $E820MAX, %al
jnl bail820
jae bail820
incb (E820NR)
movw %di, %ax
......
......@@ -29,8 +29,6 @@ static void __init clear_bss(void)
(unsigned long) __bss_end - (unsigned long) __bss_start);
}
extern char x86_boot_params[2048];
#define NEW_CL_POINTER 0x228 /* Relative to real mode data */
#define OLD_CL_MAGIC_ADDR 0x90020
#define OLD_CL_MAGIC 0xA33F
......@@ -44,7 +42,7 @@ static void __init copy_bootdata(char *real_mode_data)
int new_data;
char * command_line;
memcpy(x86_boot_params, real_mode_data, 2048);
memcpy(x86_boot_params, real_mode_data, BOOT_PARAM_SIZE);
new_data = *(int *) (x86_boot_params + NEW_CL_POINTER);
if (!new_data) {
if (OLD_CL_MAGIC != * (u16 *) OLD_CL_MAGIC_ADDR) {
......
......@@ -12,6 +12,7 @@
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/bitops.h>
#include <asm/bootsetup.h>
#include <asm/pda.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
......@@ -26,7 +27,7 @@
#include <asm/mman.h>
#include <asm/numa.h>
char x86_boot_params[2048] __initdata = {0,};
char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,};
cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
......
......@@ -13,7 +13,7 @@
#define __E820_HEADER
#define E820MAP 0x2d0 /* our map */
#define E820MAX 32 /* number of entries in E820MAP */
#define E820MAX 128 /* number of entries in E820MAP */
#define E820NR 0x1e8 /* # entries in E820MAP */
#define E820_RAM 1
......
......@@ -16,7 +16,7 @@
#define MAXMEM_PFN PFN_DOWN(MAXMEM)
#define MAX_NONPAE_PFN (1 << 20)
#define PARAM_SIZE 2048
#define PARAM_SIZE 4096
#define COMMAND_LINE_SIZE 256
#define OLD_CL_MAGIC_ADDR 0x90020
......
......@@ -2,7 +2,8 @@
#ifndef _X86_64_BOOTSETUP_H
#define _X86_64_BOOTSETUP_H 1
extern char x86_boot_params[2048];
#define BOOT_PARAM_SIZE 4096
extern char x86_boot_params[BOOT_PARAM_SIZE];
/*
* This is set up by the setup-routine at boot-time
......
......@@ -14,7 +14,7 @@
#include <linux/mmzone.h>
#define E820MAP 0x2d0 /* our map */
#define E820MAX 32 /* number of entries in E820MAP */
#define E820MAX 128 /* number of entries in E820MAP */
#define E820NR 0x1e8 /* # entries in E820MAP */
#define E820_RAM 1
......
......@@ -32,7 +32,7 @@
#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF
in boot_params - treat this as 1 byte */
#define EDDBUF 0x600 /* addr of edd_info structs in boot_params */
#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */
#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */
#define EDDEXTSIZE 8 /* change these if you muck with the structures */
#define EDDPARMSIZE 74
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment