Commit f5b8cb9c authored by Matthew Dharm's avatar Matthew Dharm Committed by Greg Kroah-Hartman

[PATCH] USB Storage: cleanups of sddr09

This is the first of three patches to prepare the sddr09 subdriver for
conversion to the Sim-SCSI framework.  This patch (as594) straightens
out the initialization procedures and headers:

	Some ugly code from usb.c was moved into sddr09.c.

	Set-up of the private data structures was moved into the
	initialization routine.

	The connection between the "dpcm" version and the standalone
	version was clarified.

	A private declaration was moved from a header file into the
	subdriver's .c file.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Acked-by: default avatarAndries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: default avatarMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 7931e1c6
......@@ -45,10 +45,6 @@
* mode */
int usb_stor_euscsi_init(struct us_data *us);
#ifdef CONFIG_USB_STORAGE_SDDR09
int sddr09_init(struct us_data *us);
#endif
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
......@@ -214,6 +214,20 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
* The actual driver starts here.
*/
struct sddr09_card_info {
unsigned long capacity; /* Size of card in bytes */
int pagesize; /* Size of page in bytes */
int pageshift; /* log2 of pagesize */
int blocksize; /* Size of block in pages */
int blockshift; /* log2 of blocksize */
int blockmask; /* 2^blockshift - 1 */
int *lba_to_pba; /* logical to physical map */
int *pba_to_lba; /* physical to logical map */
int lbact; /* number of available pages */
int flags;
#define SDDR09_WP 1 /* write protected */
};
/*
* On my 16MB card, control blocks have size 64 (16 real control bytes,
* and 48 junk bytes). In reality of course the card uses 16 control bytes,
......@@ -1342,27 +1356,51 @@ sddr09_card_info_destructor(void *extra) {
kfree(info->pba_to_lba);
}
static void
sddr09_init_card_info(struct us_data *us) {
if (!us->extra) {
us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
if (us->extra) {
memset(us->extra, 0, sizeof(struct sddr09_card_info));
us->extra_destructor = sddr09_card_info_destructor;
}
static int
sddr09_common_init(struct us_data *us) {
int result;
/* set the configuration -- STALL is an acceptable response here */
if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
->actconfig->desc.bConfigurationValue);
return -EINVAL;
}
result = usb_reset_configuration(us->pusb_dev);
US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
if (result == -EPIPE) {
US_DEBUGP("-- stall on control interface\n");
} else if (result != 0) {
/* it's not a stall, but another error -- time to bail */
US_DEBUGP("-- Unknown error. Rejecting device\n");
return -EINVAL;
}
us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
if (!us->extra)
return -ENOMEM;
us->extra_destructor = sddr09_card_info_destructor;
nand_init_ecc();
return 0;
}
/*
* This is needed at a very early stage. If this is not listed in the
* unusual devices list but called from here then LUN 0 of the combo reader
* is not recognized. But I do not know what precisely these calls do.
*/
int
sddr09_init(struct us_data *us) {
usb_stor_sddr09_dpcm_init(struct us_data *us) {
int result;
unsigned char *data = us->iobuf;
result = sddr09_common_init(us);
if (result)
return result;
result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("sddr09_init: send_command fails\n");
......@@ -1398,7 +1436,7 @@ sddr09_init(struct us_data *us) {
// test unit ready
return USB_STOR_TRANSPORT_GOOD; /* not result */
return 0; /* not result */
}
/*
......@@ -1427,13 +1465,6 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
};
info = (struct sddr09_card_info *)us->extra;
if (!info) {
nand_init_ecc();
sddr09_init_card_info(us);
info = (struct sddr09_card_info *)us->extra;
if (!info)
return USB_STOR_TRANSPORT_ERROR;
}
if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
/* for a faked command, we have to follow with a faked sense */
......@@ -1606,3 +1637,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_GOOD;
}
/*
* Initialization routine for the sddr09 subdriver
*/
int
usb_stor_sddr09_init(struct us_data *us) {
return sddr09_common_init(us);
}
......@@ -31,18 +31,7 @@
extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
struct sddr09_card_info {
unsigned long capacity; /* Size of card in bytes */
int pagesize; /* Size of page in bytes */
int pageshift; /* log2 of pagesize */
int blocksize; /* Size of block in pages */
int blockshift; /* log2 of blocksize */
int blockmask; /* 2^blockshift - 1 */
int *lba_to_pba; /* logical to physical map */
int *pba_to_lba; /* physical to logical map */
int lbact; /* number of available pages */
int flags;
#define SDDR09_WP 1 /* write protected */
};
extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
extern int usb_stor_sddr09_init(struct us_data *us);
#endif
......@@ -284,14 +284,14 @@ UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR09",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN ),
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
/* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
0),
#endif
......@@ -681,8 +681,8 @@ UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
"Olympus",
"Camedia MAUSB-2",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN ),
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
#endif
/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
......@@ -747,8 +747,8 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR-09",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN ),
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
#endif
#ifdef CONFIG_USB_STORAGE_FREECOM
......
......@@ -919,28 +919,6 @@ static int storage_probe(struct usb_interface *intf,
*/
get_device_info(us, id);
#ifdef CONFIG_USB_STORAGE_SDDR09
if (us->protocol == US_PR_EUSB_SDDR09 ||
us->protocol == US_PR_DPCM_USB) {
/* set the configuration -- STALL is an acceptable response here */
if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
->actconfig->desc.bConfigurationValue);
goto BadDevice;
}
result = usb_reset_configuration(us->pusb_dev);
US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
if (result == -EPIPE) {
US_DEBUGP("-- stall on control interface\n");
} else if (result != 0) {
/* it's not a stall, but another error -- time to bail */
US_DEBUGP("-- Unknown error. Rejecting device\n");
goto BadDevice;
}
}
#endif
/* Get the transport, protocol, and pipe settings */
result = get_transport(us);
if (result)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment