[POWERPC] cell: Move PMU-related stuff to include/asm-powerpc/cell-pmu.h

Move some PMU-related macros and function prototypes from cbe_regs.h
and pmu.h in arch/powerpc/platforms/cell/ to a new header at
include/asm-powerpc/cell-pmu.h

This is cleaner to use from the oprofile code, since that sits in
arch/powerpc/oprofile, not in the cell platform directory.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/cell/cbe_regs.h

@@ -15,6 +15,8 @@
 #ifndef CBE_REGS_H
 #define CBE_REGS_H
 
+#include <asm/cell-pmu.h>
+
 /*
  *
  * Some HID register definitions
@@ -35,32 +37,6 @@
  *
  */
 
-/* Macros for the pm_control register. */
-#define CBE_PM_16BIT_CTR(ctr)			(1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
-#define CBE_PM_ENABLE_PERF_MON			0x80000000
-#define CBE_PM_STOP_AT_MAX			0x40000000
-#define CBE_PM_TRACE_MODE_GET(pm_control)	(((pm_control) >> 28) & 0x3)
-#define CBE_PM_TRACE_MODE_SET(mode)		(((mode)  & 0x3) << 28)
-#define CBE_PM_COUNT_MODE_SET(count)		(((count) & 0x3) << 18)
-#define CBE_PM_FREEZE_ALL_CTRS			0x00100000
-#define CBE_PM_ENABLE_EXT_TRACE			0x00008000
-
-/* Macros for the trace_address register. */
-#define CBE_PM_TRACE_BUF_FULL			0x00000800
-#define CBE_PM_TRACE_BUF_EMPTY			0x00000400
-#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)		((ta) & 0x3ff)
-#define CBE_PM_TRACE_BUF_MAX_COUNT		0x400
-
-/* Macros for the pm07_control registers. */
-#define CBE_PM_CTR_INPUT_MUX(pm07_control)	(((pm07_control) >> 26) & 0x3f)
-#define CBE_PM_CTR_INPUT_CONTROL		0x02000000
-#define CBE_PM_CTR_POLARITY			0x01000000
-#define CBE_PM_CTR_COUNT_CYCLES			0x00800000
-#define CBE_PM_CTR_ENABLE			0x00400000
-
-/* Macros for the pm_status register. */
-#define CBE_PM_CTR_OVERFLOW_INTR(ctr)		(1 << (31 - ((ctr) & 7)))
-
 union spe_reg {
 	u64 val;
 	u8 spe[8];
@@ -160,9 +136,6 @@ extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
  * counters currently have a value waiting to be written.
  */
 
-#define NR_PHYS_CTRS	4
-#define NR_CTRS		(NR_PHYS_CTRS * 2)
-
 struct cbe_pmd_shadow_regs {
 	u32 group_control;
 	u32 debug_bus_control;

arch/powerpc/platforms/cell/pmu.c

@@ -30,7 +30,6 @@
 
 #include "cbe_regs.h"
 #include "interrupt.h"
-#include "pmu.h"
 
 /*
  * When writing to write-only mmio addresses, save a shadow copy. All of the

arch/powerpc/platforms/cell/pmu.h → include/asm-powerpc/cell-pmu.h

 /*
  * Cell Broadband Engine Performance Monitor
  *
- * (C) Copyright IBM Corporation 2001,2006
+ * (C) Copyright IBM Corporation 2006
  *
  * Author:
  *   David Erb (djerb@us.ibm.com)
@@ -22,8 +22,40 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __PERFMON_H__
-#define __PERFMON_H__
+#ifndef __ASM_CELL_PMU_H__
+#define __ASM_CELL_PMU_H__
+
+/* The Cell PMU has four hardware performance counters, which can be
+ * configured as four 32-bit counters or eight 16-bit counters.
+ */
+#define NR_PHYS_CTRS 4
+#define NR_CTRS      (NR_PHYS_CTRS * 2)
+
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON             0x80000000
+#define CBE_PM_STOP_AT_MAX                 0x40000000
+#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
+#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
+#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
+#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
+#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
+
+/* Macros for the trace_address register. */
+#define CBE_PM_TRACE_BUF_FULL              0x00000800
+#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
+#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
+#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
+
+/* Macros for the pm07_control registers. */
+#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
+#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
+#define CBE_PM_CTR_POLARITY                0x01000000
+#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
+#define CBE_PM_CTR_ENABLE                  0x00400000
+
+/* Macros for the pm_status register. */
+#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
 
 enum pm_reg_name {
 	group_control,
@@ -36,6 +68,7 @@ enum pm_reg_name {
 	pm_start_stop,
 };
 
+/* Routines for reading/writing the PMU registers. */
 extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
 extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
 extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
@@ -43,8 +76,8 @@ extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
 
 extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
 extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-extern u32  cbe_read_pm (u32 cpu, enum pm_reg_name reg);
-extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val);
+extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
 
 extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
 extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
@@ -54,4 +87,4 @@ extern void cbe_disable_pm(u32 cpu);
 
 extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
 
-#endif
+#endif /* __ASM_CELL_PMU_H__ */