Merge git://oak/home/sfr/kernels/iseries/work

arch/powerpc/kernel/Makefile

@@ -12,7 +12,7 @@ CFLAGS_btext.o		+= -fPIC
 endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
-				   signal_32.o pmc.o
+				   irq.o signal_32.o pmc.o
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o systbl.o \
 				   paca.o ioctl32.o cpu_setup_power4.o \

arch/powerpc/kernel/misc_64.S

@@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_handle_IRQ_event)
+_GLOBAL(call___do_IRQ)
 	mflr	r0
 	std	r0,16(r1)
-	stdu	r1,THREAD_SIZE-112(r6)
-	mr	r1,r6
-	bl	.handle_IRQ_event
+	stdu	r1,THREAD_SIZE-112(r5)
+	mr	r1,r5
+	bl	.__do_IRQ
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0

arch/powerpc/kernel/setup-common.c

@@ -53,6 +53,8 @@
 #include <asm/lmb.h>
 #include <asm/xmon.h>
 
+#include "setup.h"
+
 #undef DEBUG
 
 #ifdef DEBUG

arch/powerpc/kernel/setup.h

+#ifndef _POWERPC_KERNEL_SETUP_H
+#define _POWERPC_KERNEL_SETUP_H
+
+void check_for_initrd(void);
+
+#endif /* _POWERPC_KERNEL_SETUP_H */

arch/powerpc/kernel/setup_32.c

@@ -40,6 +40,8 @@
 #include <asm/xmon.h>
 #include <asm/time.h>
 
+#include "setup.h"
+
 #define DBG(fmt...)
 
 #if defined CONFIG_KGDB

arch/powerpc/kernel/setup_64.c

@@ -61,6 +61,8 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 
+#include "setup.h"
+
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
 #else

arch/powerpc/platforms/iseries/irq.c

@@ -103,6 +103,9 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 		struct pt_regs *regsParm)
 {
 	int irq;
+#ifdef CONFIG_IRQSTACKS
+	struct thread_info *curtp, *irqtp;
+#endif
 
 	++Pci_Interrupt_Count;
 
@@ -110,7 +113,20 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 	case XmPciLpEvent_SlotInterrupt:
 		irq = eventParm->hvLpEvent.xCorrelationToken;
 		/* Dispatch the interrupt handlers for this irq */
-		ppc_irq_dispatch_handler(regsParm, irq);
+#ifdef CONFIG_IRQSTACKS
+		/* Switch to the irq stack to handle this */
+		curtp = current_thread_info();
+		irqtp = hardirq_ctx[smp_processor_id()];
+		if (curtp != irqtp) {
+			irqtp->task = curtp->task;
+			irqtp->flags = 0;
+			call___do_IRQ(irq, regsParm, irqtp);
+			irqtp->task = NULL;
+			if (irqtp->flags)
+				set_bits(irqtp->flags, &curtp->flags);
+		} else
+#endif
+			__do_IRQ(irq, regsParm);
 		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
 			eventParm->eventData.slotInterrupt.subBusNumber,
 			eventParm->eventData.slotInterrupt.deviceId);
@@ -310,10 +326,8 @@ static void iSeries_disable_IRQ(unsigned int irq)
 }
 
 /*
- * Need to define this so ppc_irq_dispatch_handler will NOT call
- * enable_IRQ at the end of interrupt handling.  However, this does
- * nothing because there is not enough information provided to do
- * the EOI HvCall.  This is done by XmPciLpEvent.c
+ * This does nothing because there is not enough information
+ * provided to do the EOI HvCall.  This is done by XmPciLpEvent.c
  */
 static void iSeries_end_IRQ(unsigned int irq)
 {

arch/powerpc/platforms/powermac/pic.c

@@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
 #define GATWICK_IRQ_POOL_SIZE        10
 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
 
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
 /*
  * Mark an irq as "lost".  This is only used on the pmac
  * since it can lose interrupts (see pmac_set_irq_mask).

arch/powerpc/platforms/pseries/xics.c

@@ -567,6 +567,7 @@ nextnode:
 
 	xics_8259_pic.enable = i8259_pic.enable;
 	xics_8259_pic.disable = i8259_pic.disable;
+	xics_8259_pic.end = i8259_pic.end;
 	for (i = 0; i < 16; ++i)
 		get_irq_desc(i)->handler = &xics_8259_pic;
 	for (; i < NR_IRQS; ++i)

arch/ppc/kernel/Makefile

@@ -12,7 +12,7 @@ extra-$(CONFIG_6xx)		+= idle_6xx.o
 extra-$(CONFIG_POWER4)		+= idle_power4.o
 extra-y				+= vmlinux.lds
 
-obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
+obj-y				:= entry.o traps.o idle.o time.o misc.o \
 					process.o align.o \
 					setup.o \
 					ppc_htab.o
@@ -38,8 +38,7 @@ endif
 # These are here while we do the architecture merge
 
 else
-obj-y				:= irq.o idle.o \
-					align.o
+obj-y				:= idle.o align.o
 obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_MODULES)		+= module.o

arch/ppc/kernel/irq.c

-/*
- *  arch/ppc/kernel/irq.c
- *
- *  Derived from arch/i386/kernel/irq.c
- *    Copyright (C) 1992 Linus Torvalds
- *  Adapted from arch/i386 by Gary Thomas
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
- *    Copyright (C) 1996-2001 Cort Dougan
- *  Adapted for Power Macintosh by Paul Mackerras
- *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- * This file contains the code used by various IRQ handling routines:
- * asking for different IRQ's should be done through these routines
- * instead of just grabbing them. Thus setups with different IRQ numbers
- * shouldn't result in any weird surprises, and installing new handlers
- * should be easier.
- *
- * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
- * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
- * mask register (of which only 16 are defined), hence the weird shifting
- * and complement of the cached_irq_mask.  I want to be able to stuff
- * this right into the SIU SMASK register.
- * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
- * to reduce code space and undefined function references.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/proc_fs.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-#include <linux/cpumask.h>
-#include <linux/profile.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/cache.h>
-#include <asm/prom.h>
-#include <asm/ptrace.h>
-#include <asm/machdep.h>
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-
-#define MAXCOUNT 10000000
-
-int ppc_spurious_interrupts = 0;
-struct irqaction *ppc_irq_action[NR_IRQS];
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-atomic_t ppc_n_lost_interrupts;
-
-#ifdef CONFIG_TAU_INT
-extern int tau_initialized;
-extern int tau_interrupts(int);
-#endif
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_puts(p, "           ");
-		for (j=0; j<NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ", j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
-		if ( !action || !action->handler )
-			goto skip;
-		seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ",
-					   kstat_cpu(j).irqs[i]);
-#else
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
-		if (irq_desc[i].handler)
-			seq_printf(p, " %s ", irq_desc[i].handler->typename);
-		else
-			seq_puts(p, "  None      ");
-		seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge  ");
-		seq_printf(p, "    %s", action->name);
-		for (action = action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-#ifdef CONFIG_TAU_INT
-		if (tau_initialized){
-			seq_puts(p, "TAU: ");
-			for (j = 0; j < NR_CPUS; j++)
-				if (cpu_online(j))
-					seq_printf(p, "%10u ", tau_interrupts(j));
-			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
-		}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
-	}
-	return 0;
-}
-
-void do_IRQ(struct pt_regs *regs)
-{
-	int irq, first = 1;
-        irq_enter();
-
-	/*
-	 * Every platform is required to implement ppc_md.get_irq.
-	 * This function will either return an irq number or -1 to
-	 * indicate there are no more pending.  But the first time
-	 * through the loop this means there wasn't and IRQ pending.
-	 * The value -2 is for buggy hardware and means that this IRQ
-	 * has already been handled. -- Tom
-	 */
-	while ((irq = ppc_md.get_irq(regs)) >= 0) {
-		__do_IRQ(irq, regs);
-		first = 0;
-	}
-	if (irq != -2 && first)
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
-        irq_exit();
-}
-
-void __init init_IRQ(void)
-{
-	ppc_md.init_IRQ();
-}

arch/ppc/kernel/ppc_ksyms.c

@@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception);
 EXPORT_SYMBOL(single_step_exception);
 EXPORT_SYMBOL(sys_sigreturn);
 EXPORT_SYMBOL(ppc_n_lost_interrupts);
-EXPORT_SYMBOL(ppc_lost_interrupts);
 
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);

arch/ppc/platforms/pmac_pic.c

@@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
 #define GATWICK_IRQ_POOL_SIZE        10
 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
 
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
 /*
  * Mark an irq as "lost".  This is only used on the pmac
  * since it can lose interrupts (see pmac_set_irq_mask).

arch/ppc64/kernel/Makefile

@@ -11,7 +11,7 @@ obj-y               :=	misc.o prom.o
 
 endif
 
-obj-y               +=	irq.o idle.o dma.o \
+obj-y               +=	idle.o dma.o \
 			align.o \
 			udbg.o \
 			rtc.o \

arch/ppc64/kernel/misc.S

@@ -78,12 +78,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_handle_IRQ_event)
+_GLOBAL(call___do_IRQ)
 	mflr	r0
 	std	r0,16(r1)
-	stdu	r1,THREAD_SIZE-112(r6)
-	mr	r1,r6
-	bl	.handle_IRQ_event
+	stdu	r1,THREAD_SIZE-112(r5)
+	mr	r1,r5
+	bl	.__do_IRQ
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0

include/asm-powerpc/hw_irq.h

@@ -12,7 +12,6 @@
 #include <asm/processor.h>
 
 extern void timer_interrupt(struct pt_regs *);
-extern void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq);
 
 #ifdef CONFIG_PPC_ISERIES
 

include/asm-powerpc/irq.h

@@ -429,7 +429,6 @@ extern u64 ppc64_interrupt_controller;
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 /* pedantic: these are long because they are used with set_bit --RR */
 extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
 extern atomic_t ppc_n_lost_interrupts;
 
 #define virt_irq_create_mapping(x)	(x)
@@ -488,8 +487,8 @@ extern struct thread_info *softirq_ctx[NR_CPUS];
 
 extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
-extern int call_handle_IRQ_event(int irq, struct pt_regs *regs,
-			struct irqaction *action, struct thread_info *tp);
+extern int call___do_IRQ(int irq, struct pt_regs *regs,
+		struct thread_info *tp);
 
 #define __ARCH_HAS_DO_SOFTIRQ