[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbd

Reworked from a patch by Mingming Cao and Randy Dunlap
Signed-off-By: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

fs/Kconfig

@@ -143,24 +143,24 @@ config EXT3_FS_SECURITY
 config EXT4DEV_FS
 	tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-        select JBD
-        help
+	select JBD2
+	help
 	  Ext4dev is a predecessor filesystem of the next generation
 	  extended fs ext4, based on ext3 filesystem code. It will be
 	  renamed ext4 fs later, once ext4dev is mature and stabilized.
 
-          Unlike the change from ext2 filesystem to ext3 filesystem,
-          the on-disk format of ext4dev is not the same as ext3 any more:
+	  Unlike the change from ext2 filesystem to ext3 filesystem,
+	  the on-disk format of ext4dev is not the same as ext3 any more:
 	  it is based on extent maps and it supports 48-bit physical block
-          numbers. These combined on-disk format changes will allow
+	  numbers. These combined on-disk format changes will allow
 	  ext4dev/ext4 to handle more than 16 TB filesystem volumes --
 	  a hard limit that ext3 cannot overcome without changing the
-          on-disk format.
+	  on-disk format.
 
 	  Other than extent maps and 48-bit block numbers, ext4dev also is
-          likely to have other new features such as persistent preallocation,
+	  likely to have other new features such as persistent preallocation,
 	  high resolution time stamps, and larger file support etc.  These
-          features will be added to ext4dev gradually.
+	  features will be added to ext4dev gradually.
 
 	  To compile this file system support as a module, choose M here. The
 	  module will be called ext4dev.  Be aware, however, that the filesystem
@@ -239,6 +239,38 @@ config JBD_DEBUG
 	  generated.  To turn debugging off again, do
 	  "echo 0 > /proc/sys/fs/jbd-debug".
 
+config JBD2
+	tristate
+	help
+	  This is a generic journaling layer for block devices that support
+	  both 32-bit and 64-bit block numbers.  It is currently used by
+	  the ext4dev/ext4 filesystem, but it could also be used to add
+	  journal support to other file systems or block devices such
+	  as RAID or LVM.
+
+	  If you are using ext4dev/ext4, you need to say Y here. If you are not
+	  using ext4dev/ext4 then you will probably want to say N.
+
+	  To compile this device as a module, choose M here. The module will be
+	  called jbd2.  If you are compiling ext4dev/ext4 into the kernel,
+	  you cannot compile this code as a module.
+
+config JBD2_DEBUG
+	bool "JBD2 (ext4dev/ext4) debugging support"
+	depends on JBD2
+	help
+	  If you are using the ext4dev/ext4 journaled file system (or
+	  potentially any other filesystem/device using JBD2), this option
+	  allows you to enable debugging output while the system is running,
+	  in order to help track down any problems you are having.
+	  By default, the debugging output will be turned off.
+
+	  If you select Y here, then you will be able to turn on debugging
+	  with "echo N > /proc/sys/fs/jbd2-debug", where N is a number between
+	  1 and 5. The higher the number, the more debugging output is
+	  generated.  To turn debugging off again, do
+	  "echo 0 > /proc/sys/fs/jbd2-debug".
+
 config FS_MBCACHE
 # Meta block cache for Extended Attributes (ext2/ext3/ext4)
 	tristate

fs/Makefile

@@ -64,6 +64,7 @@ obj-$(CONFIG_REISERFS_FS)	+= reiserfs/
 obj-$(CONFIG_EXT3_FS)		+= ext3/ # Before ext2 so root fs can be ext3
 obj-$(CONFIG_EXT4DEV_FS)	+= ext4/ # Before ext2 so root fs can be ext4dev
 obj-$(CONFIG_JBD)		+= jbd/
+obj-$(CONFIG_JBD2)		+= jbd2/
 obj-$(CONFIG_EXT2_FS)		+= ext2/
 obj-$(CONFIG_CRAMFS)		+= cramfs/
 obj-$(CONFIG_RAMFS)		+= ramfs/

fs/ext4/acl.c

@@ -9,7 +9,7 @@
 #include <linux/slab.h>
 #include <linux/capability.h>
 #include <linux/fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/ext4_fs.h>
 #include "xattr.h"
 #include "acl.h"

fs/ext4/balloc.c

@@ -14,9 +14,9 @@
 #include <linux/time.h>
 #include <linux/capability.h>
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/quotaops.h>
 #include <linux/buffer_head.h>
 
@@ -526,12 +526,12 @@ do_more:
 		 * transaction.
 		 *
 		 * Ideally we would want to allow that to happen, but to
-		 * do so requires making journal_forget() capable of
+		 * do so requires making jbd2_journal_forget() capable of
 		 * revoking the queued write of a data block, which
 		 * implies blocking on the journal lock.  *forget()
 		 * cannot block due to truncate races.
 		 *
-		 * Eventually we can fix this by making journal_forget()
+		 * Eventually we can fix this by making jbd2_journal_forget()
 		 * return a status indicating whether or not it was able
 		 * to revoke the buffer.  On successful revoke, it is
 		 * safe not to set the allocation bit in the committed
@@ -1382,7 +1382,7 @@ int ext4_should_retry_alloc(struct super_block *sb, int *retries)
 
 	jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
 
-	return journal_force_commit_nested(EXT4_SB(sb)->s_journal);
+	return jbd2_journal_force_commit_nested(EXT4_SB(sb)->s_journal);
 }
 
 /**

fs/ext4/bitmap.c

@@ -8,7 +8,7 @@
  */
 
 #include <linux/buffer_head.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
 
 #ifdef EXT4FS_DEBUG

fs/ext4/dir.c

@@ -22,7 +22,7 @@
  */
 
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
 #include <linux/buffer_head.h>
 #include <linux/smp_lock.h>

fs/ext4/file.c

@@ -20,9 +20,9 @@
 
 #include <linux/time.h>
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include "xattr.h"
 #include "acl.h"
 

fs/ext4/fsync.c

@@ -26,9 +26,9 @@
 #include <linux/fs.h>
 #include <linux/sched.h>
 #include <linux/writeback.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 
 /*
  * akpm: A new design for ext4_sync_file().

fs/ext4/hash.c

@@ -10,7 +10,7 @@
  */
 
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/sched.h>
 #include <linux/ext4_fs.h>
 #include <linux/cryptohash.h>

fs/ext4/ialloc.c

@@ -14,9 +14,9 @@
 
 #include <linux/time.h>
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/stat.h>
 #include <linux/string.h>
 #include <linux/quotaops.h>
@@ -497,7 +497,7 @@ repeat_in_this_group:
 				goto got;
 			}
 			/* we lost it */
-			journal_release_buffer(handle, bitmap_bh);
+			jbd2_journal_release_buffer(handle, bitmap_bh);
 
 			if (++ino < EXT4_INODES_PER_GROUP(sb))
 				goto repeat_in_this_group;

fs/ext4/inode.c

@@ -25,8 +25,8 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/time.h>
-#include <linux/ext4_jbd.h>
-#include <linux/jbd.h>
+#include <linux/ext4_jbd2.h>
+#include <linux/jbd2.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
 #include <linux/pagemap.h>
@@ -84,7 +84,7 @@ int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
 	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ||
 	    (!is_metadata && !ext4_should_journal_data(inode))) {
 		if (bh) {
-			BUFFER_TRACE(bh, "call journal_forget");
+			BUFFER_TRACE(bh, "call jbd2_journal_forget");
 			return ext4_journal_forget(handle, bh);
 		}
 		return 0;
@@ -657,7 +657,7 @@ static int ext4_alloc_branch(handle_t *handle, struct inode *inode,
 failed:
 	/* Allocation failed, free what we already allocated */
 	for (i = 1; i <= n ; i++) {
-		BUFFER_TRACE(branch[i].bh, "call journal_forget");
+		BUFFER_TRACE(branch[i].bh, "call jbd2_journal_forget");
 		ext4_journal_forget(handle, branch[i].bh);
 	}
 	for (i = 0; i <indirect_blks; i++)
@@ -758,7 +758,7 @@ static int ext4_splice_branch(handle_t *handle, struct inode *inode,
 
 err_out:
 	for (i = 1; i <= num; i++) {
-		BUFFER_TRACE(where[i].bh, "call journal_forget");
+		BUFFER_TRACE(where[i].bh, "call jbd2_journal_forget");
 		ext4_journal_forget(handle, where[i].bh);
 		ext4_free_blocks(handle,inode,le32_to_cpu(where[i-1].key),1);
 	}
@@ -1119,7 +1119,7 @@ static int walk_page_buffers(	handle_t *handle,
  * To preserve ordering, it is essential that the hole instantiation and
  * the data write be encapsulated in a single transaction.  We cannot
  * close off a transaction and start a new one between the ext4_get_block()
- * and the commit_write().  So doing the journal_start at the start of
+ * and the commit_write().  So doing the jbd2_journal_start at the start of
  * prepare_write() is the right place.
  *
  * Also, this function can nest inside ext4_writepage() ->
@@ -1135,7 +1135,7 @@ static int walk_page_buffers(	handle_t *handle,
  * transaction open and was blocking on the quota lock - a ranking
  * violation.
  *
- * So what we do is to rely on the fact that journal_stop/journal_start
+ * So what we do is to rely on the fact that jbd2_journal_stop/journal_start
  * will _not_ run commit under these circumstances because handle->h_ref
  * is elevated.  We'll still have enough credits for the tiny quotafile
  * write.
@@ -1184,7 +1184,7 @@ out:
 
 int ext4_journal_dirty_data(handle_t *handle, struct buffer_head *bh)
 {
-	int err = journal_dirty_data(handle, bh);
+	int err = jbd2_journal_dirty_data(handle, bh);
 	if (err)
 		ext4_journal_abort_handle(__FUNCTION__, __FUNCTION__,
 						bh, handle,err);
@@ -1333,9 +1333,9 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block)
 
 		EXT4_I(inode)->i_state &= ~EXT4_STATE_JDATA;
 		journal = EXT4_JOURNAL(inode);
-		journal_lock_updates(journal);
-		err = journal_flush(journal);
-		journal_unlock_updates(journal);
+		jbd2_journal_lock_updates(journal);
+		err = jbd2_journal_flush(journal);
+		jbd2_journal_unlock_updates(journal);
 
 		if (err)
 			return 0;
@@ -1356,7 +1356,7 @@ static int bput_one(handle_t *handle, struct buffer_head *bh)
 	return 0;
 }
 
-static int journal_dirty_data_fn(handle_t *handle, struct buffer_head *bh)
+static int jbd2_journal_dirty_data_fn(handle_t *handle, struct buffer_head *bh)
 {
 	if (buffer_mapped(bh))
 		return ext4_journal_dirty_data(handle, bh);
@@ -1464,7 +1464,7 @@ static int ext4_ordered_writepage(struct page *page,
 	 */
 	if (ret == 0) {
 		err = walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE,
-					NULL, journal_dirty_data_fn);
+					NULL, jbd2_journal_dirty_data_fn);
 		if (!ret)
 			ret = err;
 	}
@@ -1595,7 +1595,7 @@ static void ext4_invalidatepage(struct page *page, unsigned long offset)
 	if (offset == 0)
 		ClearPageChecked(page);
 
-	journal_invalidatepage(journal, page, offset);
+	jbd2_journal_invalidatepage(journal, page, offset);
 }
 
 static int ext4_releasepage(struct page *page, gfp_t wait)
@@ -1605,7 +1605,7 @@ static int ext4_releasepage(struct page *page, gfp_t wait)
 	WARN_ON(PageChecked(page));
 	if (!page_has_buffers(page))
 		return 0;
-	return journal_try_to_free_buffers(journal, page, wait);
+	return jbd2_journal_try_to_free_buffers(journal, page, wait);
 }
 
 /*
@@ -1982,11 +1982,11 @@ static void ext4_clear_blocks(handle_t *handle, struct inode *inode,
 
 	/*
 	 * Any buffers which are on the journal will be in memory. We find
-	 * them on the hash table so journal_revoke() will run journal_forget()
+	 * them on the hash table so jbd2_journal_revoke() will run jbd2_journal_forget()
 	 * on them.  We've already detached each block from the file, so
-	 * bforget() in journal_forget() should be safe.
+	 * bforget() in jbd2_journal_forget() should be safe.
 	 *
-	 * AKPM: turn on bforget in journal_forget()!!!
+	 * AKPM: turn on bforget in jbd2_journal_forget()!!!
 	 */
 	for (p = first; p < last; p++) {
 		u32 nr = le32_to_cpu(*p);
@@ -2132,11 +2132,11 @@ static void ext4_free_branches(handle_t *handle, struct inode *inode,
 			 * We've probably journalled the indirect block several
 			 * times during the truncate.  But it's no longer
 			 * needed and we now drop it from the transaction via
-			 * journal_revoke().
+			 * jbd2_journal_revoke().
 			 *
 			 * That's easy if it's exclusively part of this
 			 * transaction.  But if it's part of the committing
-			 * transaction then journal_forget() will simply
+			 * transaction then jbd2_journal_forget() will simply
 			 * brelse() it.  That means that if the underlying
 			 * block is reallocated in ext4_get_block(),
 			 * unmap_underlying_metadata() will find this block
@@ -2251,7 +2251,7 @@ void ext4_truncate(struct inode *inode)
 
 	/*
 	 * We have to lock the EOF page here, because lock_page() nests
-	 * outside journal_start().
+	 * outside jbd2_journal_start().
 	 */
 	if ((inode->i_size & (blocksize - 1)) == 0) {
 		/* Block boundary? Nothing to do */
@@ -3035,7 +3035,7 @@ int ext4_mark_iloc_dirty(handle_t *handle,
 	/* the do_update_inode consumes one bh->b_count */
 	get_bh(iloc->bh);
 
-	/* ext4_do_update_inode() does journal_dirty_metadata */
+	/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */
 	err = ext4_do_update_inode(handle, inode, iloc);
 	put_bh(iloc->bh);
 	return err;
@@ -3153,7 +3153,7 @@ static int ext4_pin_inode(handle_t *handle, struct inode *inode)
 		err = ext4_get_inode_loc(inode, &iloc);
 		if (!err) {
 			BUFFER_TRACE(iloc.bh, "get_write_access");
-			err = journal_get_write_access(handle, iloc.bh);
+			err = jbd2_journal_get_write_access(handle, iloc.bh);
 			if (!err)
 				err = ext4_journal_dirty_metadata(handle,
 								  iloc.bh);
@@ -3185,8 +3185,8 @@ int ext4_change_inode_journal_flag(struct inode *inode, int val)
 	if (is_journal_aborted(journal) || IS_RDONLY(inode))
 		return -EROFS;
 
-	journal_lock_updates(journal);
-	journal_flush(journal);
+	jbd2_journal_lock_updates(journal);
+	jbd2_journal_flush(journal);
 
 	/*
 	 * OK, there are no updates running now, and all cached data is
@@ -3202,7 +3202,7 @@ int ext4_change_inode_journal_flag(struct inode *inode, int val)
 		EXT4_I(inode)->i_flags &= ~EXT4_JOURNAL_DATA_FL;
 	ext4_set_aops(inode);
 
-	journal_unlock_updates(journal);
+	jbd2_journal_unlock_updates(journal);
 
 	/* Finally we can mark the inode as dirty. */
 

fs/ext4/ioctl.c

@@ -8,10 +8,10 @@
  */
 
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/capability.h>
 #include <linux/ext4_fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/time.h>
 #include <linux/compat.h>
 #include <linux/smp_lock.h>
@@ -219,9 +219,9 @@ flags_err:
 			return -EFAULT;
 
 		err = ext4_group_extend(sb, EXT4_SB(sb)->s_es, n_blocks_count);
-		journal_lock_updates(EXT4_SB(sb)->s_journal);
-		journal_flush(EXT4_SB(sb)->s_journal);
-		journal_unlock_updates(EXT4_SB(sb)->s_journal);
+		jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+		jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
 
 		return err;
 	}
@@ -241,9 +241,9 @@ flags_err:
 			return -EFAULT;
 
 		err = ext4_group_add(sb, &input);
-		journal_lock_updates(EXT4_SB(sb)->s_journal);
-		journal_flush(EXT4_SB(sb)->s_journal);
-		journal_unlock_updates(EXT4_SB(sb)->s_journal);
+		jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+		jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
 
 		return err;
 	}

fs/ext4/namei.c

@@ -26,10 +26,10 @@
 
 #include <linux/fs.h>
 #include <linux/pagemap.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/time.h>
 #include <linux/ext4_fs.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/fcntl.h>
 #include <linux/stat.h>
 #include <linux/string.h>

fs/ext4/resize.c

@@ -13,7 +13,7 @@
 
 #include <linux/sched.h>
 #include <linux/smp_lock.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 
 #include <linux/errno.h>
 #include <linux/slab.h>

fs/ext4/symlink.c

@@ -18,7 +18,7 @@
  */
 
 #include <linux/fs.h>
-#include <linux/jbd.h>
+#include <linux/jbd2.h>
 #include <linux/ext4_fs.h>
 #include <linux/namei.h>
 #include "xattr.h"

fs/ext4/xattr.c

@@ -53,7 +53,7 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/ext4_fs.h>
 #include <linux/mbcache.h>
 #include <linux/quotaops.h>

fs/ext4/xattr_security.c

@@ -7,7 +7,7 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/smp_lock.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/ext4_fs.h>
 #include <linux/security.h>
 #include "xattr.h"

fs/ext4/xattr_trusted.c

@@ -10,7 +10,7 @@
 #include <linux/capability.h>
 #include <linux/fs.h>
 #include <linux/smp_lock.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/ext4_fs.h>
 #include "xattr.h"
 

fs/ext4/xattr_user.c

@@ -9,7 +9,7 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/smp_lock.h>
-#include <linux/ext4_jbd.h>
+#include <linux/ext4_jbd2.h>
 #include <linux/ext4_fs.h>
 #include "xattr.h"