Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/boot/compressed/head.S

@@ -19,38 +19,28 @@
  */
 #ifdef DEBUG
 
-#include <asm/arch/debug-macro.S>
-
 #if defined(CONFIG_DEBUG_ICEDCC)
 		.macro	loadsp, rb
 		.endm
-		.macro writeb, ch, rb
+		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c1, 0
 		.endm
 #else
+
+#include <asm/arch/debug-macro.S>
+
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
 		.endm
 
-#if defined(CONFIG_FOOTBRIDGE) || \
-    defined(CONFIG_ARCH_RPC) || \
-    defined(CONFIG_ARCH_INTEGRATOR) || \
-    defined(CONFIG_ARCH_PXA) || \
-    defined(CONFIG_ARCH_IXP4XX) || \
-    defined(CONFIG_ARCH_IXP2000) || \
-    defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP)
-		.macro	loadsp,	rb
-		addruart \rb
-		.endm
-#elif defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb
 		mov	\rb, #0x80000000	@ physical base address
-#  if defined(CONFIG_DEBUG_LL_SER3)
+#ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
-#  else
+#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#  endif
+#endif
 		.endm
 #elif defined(CONFIG_ARCH_IOP331)
 		.macro loadsp, rb
@@ -64,7 +54,9 @@
 		add	\rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
 		.endm
 #else
-#error no serial architecture defined
+		.macro	loadsp,	rb
+		addruart \rb
+		.endm
 #endif
 #endif
 #endif

arch/arm/common/sa1111.c

@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/hardware/sa1111.h>
 
@@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
+void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+	unsigned int sz = SZ_1M >> PAGE_SHIFT;
+
+	if (node != 0)
+		sz = 0;
+
+	size[1] = size[0] - sz;
+	size[0] = sz;
+}
+
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels

arch/arm/configs/s3c2410_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-git8
-# Thu Sep  8 19:24:02 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 17:41:24 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -61,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y
 # S3C2410 Boot
 #
 # CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
 
 #
 # S3C2410 Setup
@@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y
 #
 # Bus support
 #
+CONFIG_ISA=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_BAST=y
 CONFIG_MTD_BAST_MAXSIZE=4
@@ -369,6 +392,11 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y
 #
 # Plug and Play support
 #
+# CONFIG_PNP is not set
 
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -466,6 +489,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
 #
 # PHY device support
 #
@@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-CONFIG_DM9000=m
+CONFIG_DM9000=y
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -490,6 +528,7 @@ CONFIG_DM9000=m
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
@@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
 # CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
 
 #
 # Non-8250 serial port support
@@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
 CONFIG_S3C2410_RTC=y
@@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_ELEKTOR is not set
 CONFIG_I2C_ISA=m
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m
 # Graphics support
 #
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 
 #
 # Logo configuration
@@ -772,6 +835,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -810,6 +873,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -884,6 +949,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
@@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
@@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/arm/mach-pxa/corgi_lcd.c

@@ -22,7 +22,7 @@
 #include <linux/string.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>

arch/arm/mach-realview/core.h

@@ -26,8 +26,6 @@
 #include <asm/leds.h>
 #include <asm/io.h>
 
-#define __io_address(n)		__io(IO_ADDRESS(n))
-
 extern struct sys_timer realview_timer;
 
 #define AMBA_DEVICE(name,busid,base,plat)			\

arch/arm/mach-realview/localtimer.c

@@ -21,8 +21,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "core.h"
-
 #define TWD_BASE(cpu)	(__io_address(REALVIEW_TWD_BASE) + \
 			 ((cpu) * REALVIEW_TWD_SIZE))
 

arch/arm/mach-realview/platsmp.c

@@ -17,8 +17,7 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/arm_scu.h>
 #include <asm/hardware.h>
-
-#include "core.h"
+#include <asm/io.h>
 
 extern void realview_secondary_startup(void);
 

arch/arm/mach-s3c2410/mach-bast.c

@@ -203,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
 		.name		= "pclk",
 		.divisor	= 1,
 		.min_baud	= 0,
-		.max_baud	= 0.
+		.max_baud	= 0,
 	}
 };
 
@@ -216,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -225,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	/* port 2 is not actually used */
 	[2] = {
@@ -235,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	}
 };
 
@@ -268,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
-		.offset	= 0
+		.offset	= 0,
 	},
 	[1] = {
 		.name	= "/boot",
@@ -296,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
 		.nr_chips	= 1,
 		.nr_map		= smartmedia_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[1] = {
 		.name		= "chip0",
 		.nr_chips	= 1,
 		.nr_map		= chip0_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[2] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[3] = {
 		.name		= "chip2",
 		.nr_chips	= 1,
 		.nr_map		= chip2_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	}
 };
 
@@ -355,17 +355,17 @@ static struct resource bast_dm9k_resource[] = {
 	[0] = {
 		.start = S3C2410_CS5 + BAST_PA_DM9000,
 		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
 		.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
 		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_MEM,
 	},
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ,
 	}
 
 };
@@ -375,7 +375,7 @@ static struct resource bast_dm9k_resource[] = {
 */
 
 static struct dm9000_plat_data bast_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY
+	.flags		= DM9000_PLATF_16BITONLY,
 };
 
 static struct platform_device bast_device_dm9k = {
@@ -492,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = {
 	.devices       = bast_devices,
 	.devices_count = ARRAY_SIZE(bast_devices),
 	.clocks	       = bast_clocks,
-	.clocks_count  = ARRAY_SIZE(bast_clocks)
+	.clocks_count  = ARRAY_SIZE(bast_clocks),
 };
 
 static void __init bast_map_io(void)

arch/arm/plat-omap/dmtimer.c

@@ -26,7 +26,7 @@
  */
 
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/dmtimer.h>
 #include <asm/io.h>
 #include <asm/arch/irqs.h>

arch/arm/plat-omap/ocpi.c

@@ -34,7 +34,7 @@
 
 #include <asm/io.h>
 #include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)

arch/arm/plat-omap/pm.c

@@ -509,7 +509,7 @@ static void omap_pm_init_proc(void)
  *	@state:		suspend state we're entering.
  *
  */
-//#include <asm/arch/hardware.h>
+//#include <asm/hardware.h>
 
 static int omap_pm_prepare(suspend_state_t state)
 {

arch/arm/plat-omap/sram-fn.S

@@ -12,7 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 	.text
 

include/asm-arm/arch-clps711x/uncompress.h

@@ -19,7 +19,7 @@
  */
 #include <linux/config.h>
 #include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 #undef CLPS7111_BASE

include/asm-arm/arch-epxa10db/uncompress.h

@@ -19,7 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include "asm/arch/platform.h"
-#include "asm/arch/hardware.h"
+#include "asm/hardware.h"
 #define UART00_TYPE (volatile unsigned int*)
 #include "asm/arch/uart00.h"
 

include/asm-arm/arch-h720x/uncompress.h

@@ -7,7 +7,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define LSR 	0x14
 #define TEMPTY 	0x40

include/asm-arm/arch-imx/irqs.h

@@ -23,7 +23,7 @@
 #define __ARM_IRQS_H__
 
 /* Use the imx definitions */
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 /*
  *  IMX Interrupt numbers

include/asm-arm/arch-imx/timex.h

@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #define CLOCK_TICK_RATE		(CLK32)
 
 #endif

include/asm-arm/arch-integrator/smp.h

@@ -3,7 +3,7 @@
 
 #include <linux/config.h>
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/io.h>
 
 #define hard_smp_processor_id()				\

include/asm-arm/arch-l7200/aux_reg.h

@@ -9,7 +9,7 @@
 #ifndef _ASM_ARCH_AUXREG_H
 #define _ASM_ARCH_AUXREG_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
 

include/asm-arm/arch-l7200/gp_timers.h

@@ -10,7 +10,7 @@
 #ifndef _ASM_ARCH_GPTIMERS_H
 #define _ASM_ARCH_GPTIMERS_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 /*
  * Layout of L7200 general purpose timer registers

include/asm-arm/arch-omap/gpio.h

@@ -26,7 +26,7 @@
 #ifndef __ASM_ARCH_OMAP_GPIO_H
 #define __ASM_ARCH_OMAP_GPIO_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/io.h>
 

include/asm-arm/arch-omap/irqs.h

@@ -260,7 +260,7 @@ extern void omap_init_irq(void);
  * The definition of NR_IRQS is in board-specific header file, which is
  * included via hardware.h
  */
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #ifndef NR_IRQS
 #define NR_IRQS                 IH_BOARD_BASE

include/asm-arm/arch-omap/mcbsp.h

@@ -24,7 +24,7 @@
 #ifndef __ASM_ARCH_OMAP_MCBSP_H
 #define __ASM_ARCH_OMAP_MCBSP_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define OMAP730_MCBSP1_BASE	0xfffb1000
 #define OMAP730_MCBSP2_BASE	0xfffb1800

include/asm-arm/arch-omap/system.h

@@ -7,7 +7,7 @@
 #include <linux/config.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/prcm.h>
 
 #ifndef CONFIG_MACH_VOICEBLUE

include/asm-arm/arch-realview/hardware.h

@@ -27,5 +27,6 @@
 
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif

include/asm-arm/arch-realview/system.h

@@ -36,7 +36,7 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-	unsigned int hdr_ctrl =	(IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET);
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
 	unsigned int val;
 
 	/*

include/asm-arm/arch-rpc/system.h

@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 

include/asm-arm/arch-sa1100/memory.h

@@ -18,20 +18,10 @@
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_SA1111
-static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
-{
-	unsigned int sz = SZ_1M >> PAGE_SHIFT;
-
-	if (node != 0)
-		sz = 0;
-
-	size[1] = size[0] - sz;
-	size[0] = sz;
-}
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 
 #define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
+	sa1111_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
 

include/asm-arm/atomic.h

@@ -12,6 +12,7 @@
 #define __ASM_ARM_ATOMIC_H
 
 #include <linux/config.h>
+#include <linux/compiler.h>
 
 typedef struct { volatile int counter; } atomic_t;
 
@@ -82,11 +83,12 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 {
-	u32 oldval, res;
+	unsigned long oldval, res;
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
 		"ldrex	%1, [%2]\n"
+		"mov	%0, #0\n"
 		"teq	%1, %3\n"
 		"strexeq %0, %4, [%2]\n"
 		    : "=&r" (res), "=&r" (oldval)

include/asm-arm/bitops.h

@@ -19,6 +19,7 @@
 
 #ifdef __KERNEL__
 
+#include <linux/compiler.h>
 #include <asm/system.h>
 
 #define smp_mb__before_clear_bit()	mb()

include/asm-arm/hardware/dec21285.h

@@ -20,7 +20,7 @@
 
 #include <linux/config.h>
 #ifndef __ASSEMBLY__
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
 #else
 #define DC21285_IO(x)		(x)

include/asm-arm/mmu_context.h

@@ -13,6 +13,7 @@
 #ifndef __ASM_ARM_MMU_CONTEXT_H
 #define __ASM_ARM_MMU_CONTEXT_H
 
+#include <linux/compiler.h>
 #include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 

include/asm-arm/system.h

@@ -93,8 +93,6 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
 		     int sig, const char *name);
 
-#include <asm/proc-fns.h>
-
 #define xchg(ptr,x) \
 	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
 
@@ -102,6 +100,8 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 
 extern asmlinkage void __backtrace(void);
 extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+struct mm_struct;
 extern void show_pte(struct mm_struct *mm, unsigned long addr);
 extern void __show_regs(struct pt_regs *);
 

include/asm-arm/thread_info.h

@@ -12,6 +12,7 @@
 
 #ifdef __KERNEL__
 
+#include <linux/compiler.h>
 #include <asm/fpstate.h>
 
 #define THREAD_SIZE_ORDER	1