Commit c13e3713 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

[TG3]: Fix TSO bugs.

1. Remove the check for skb->len greater than MTU when doing TSO.
When the destination has a smaller MSS than the source, a TSO packet
may be smaller than the MTU and we still need to process it as a TSO
packet.

2. On 5705A3 devices with TSO enabled, the DMA engine can hang due to a
hardware bug.  This patch avoids the hanging condition by reducing the
DMA burst size.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 64a327a7
......@@ -3895,8 +3895,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
entry = tp->tx_prod;
base_flags = 0;
mss = 0;
if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
(mss = skb_shinfo(skb)->gso_size) != 0) {
if ((mss = skb_shinfo(skb)->gso_size) != 0) {
int tcp_opt_len, ip_tcp_len;
if (skb_header_cloned(skb) &&
......@@ -4053,8 +4052,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
if (skb->ip_summed == CHECKSUM_PARTIAL)
base_flags |= TXD_FLAG_TCPUDP_CSUM;
mss = 0;
if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
(mss = skb_shinfo(skb)->gso_size) != 0) {
if ((mss = skb_shinfo(skb)->gso_size) != 0) {
struct iphdr *iph;
int tcp_opt_len, ip_tcp_len, hdr_len;
......@@ -6346,8 +6344,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)) {
if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE &&
(tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 ||
tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) {
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
rdmac_mode |= RDMAC_MODE_FIFO_SIZE_128;
} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
!(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment