Commit a2f552f5 authored by Uwe Bugla's avatar Uwe Bugla Committed by Linus Torvalds

[PATCH] fix for Documentation/dvb/bt8xx.txt?=

*   /usr/src/linux-2.6.12/Documentation/dvb/bt8xx.txt

  almost completely remade the text file with the following focuses:
  useful infos for beginners: how to load modules manually and
  automatically developers infos are reduced to a minimum as module loading
  works automatic in kernel >= 2.6.12 by loading modules bttv and dvb-bt8xx
  I completely erased the out of date TwinHan part dealing with additional
  parameters, debug parameters, and overriding autodetection Further up to
  date information about TwinHan + clones can be found in
  /Documentation/dvb/ci.txt
Signed-off-by: default avatarUwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 3352e432
How to get the Nebula, PCTV and Twinhan DST cards working How to get the Nebula Electronics DigiTV, Pinnacle PCTV Sat, Twinhan DST + clones working
========================================================= =========================================================================================
This class of cards has a bt878a as the PCI interface, and 1) General information
require the bttv driver. ======================
Please pay close attention to the warning about the bttv module This class of cards has a bt878a chip as the PCI interface.
options below for the DST card. The different card drivers require the bttv driver to provide the means
to access the i2c bus and the gpio pins of the bt8xx chipset.
1) General informations 2) Compilation rules for Kernel >= 2.6.12
======================= =========================================
These drivers require the bttv driver to provide the means to access Enable the following options:
the i2c bus and the gpio pins of the bt8xx chipset.
Because of this, you need to enable
"Device drivers" => "Multimedia devices" "Device drivers" => "Multimedia devices"
=> "Video For Linux" => "BT848 Video For Linux" => "Video For Linux" => "BT848 Video For Linux"
Furthermore you need to enable
"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
=> "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards" => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
2) Loading Modules 3) Loading Modules, described by two approaches
================== ===============================================
In general you need to load the bttv driver, which will handle the gpio and In general you need to load the bttv driver, which will handle the gpio and
i2c communication for us, plus the common dvb-bt8xx device driver. i2c communication for us, plus the common dvb-bt8xx device driver,
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and which is called the backend.
TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. The frontends for Nebula DigiTV (nxt6000), Pinnacle PCTV Sat (cx24110),
TwinHan DST + clones (dst and dst-ca) are loaded automatically by the backend.
For further details about TwinHan DST + clones see /Documentation/dvb/ci.txt.
3a) Nebula / Pinnacle PCTV 3a) The manual approach
-------------------------- -----------------------
$ modprobe bttv (normally bttv is being loaded automatically by kmod) Loading modules:
$ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) modprobe bttv
modprobe dvb-bt8xx
Unloading modules:
modprobe -r dvb-bt8xx
modprobe -r bttv
3b) TwinHan and Clones 3b) The automatic approach
-------------------------- --------------------------
$ modprobe bttv i2c_hw=1 card=0x71 If not already done by installation, place a line either in
$ modprobe dvb-bt8xx /etc/modules.conf or in /etc/modprobe.conf containing this text:
$ modprobe dst alias char-major-81 bttv
The value 0x71 will override the PCI type detection for dvb-bt8xx,
which is necessary for TwinHan cards.
If you're having an older card (blue color circuit) and card=0x71 locks
your machine, try using 0x68, too. If that does not work, ask on the
mailing list.
The DST module takes a couple of useful parameters:
a. verbose takes values 0 to 5. These values control the verbosity level. Then place a line in /etc/modules containing this text:
b. debug takes values 0 and 1. You can either disable or enable debugging. dvb-bt8xx
c. dst_addons takes values 0 and 0x20:
- A value of 0 means it is a FTA card.
- A value of 0x20 means it has a Conditional Access slot.
The autodetected values are determined by the "response string" Reboot your system and have fun!
of the card, which you can see in your logs:
e.g.: dst_get_device_id: Recognize [DSTMCI]
-- --
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham, Uwe Bugla Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham, Uwe Bugla
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment