Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits)
  ide-acpi support warning fix
  ACPI support for IDE devices
  IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter
  ide: it8213 IDE driver update (version 2)
  ide: add it8213 IDE driver
  tc86c001: add missing __init tag for tc86c001_ide_init()
  tc86c001: mark init_chipset_tc86c001() with __devinit tag
  tc86c001: init_hwif_tc86c001() can be static
  ide: add Toshiba TC86C001 IDE driver (take 2)
  pdc202xx_new: remove check_in_drive_lists abomination
  pdc202xx_new: remove useless code
  slc90e66: carry over fixes from piix driver
  piix: tuneproc() fixes/cleanups
  piix: fix 82371MX enablebits
  hpt366: HPT36x PCI clock detection fix
  hpt366: init code rewrite
  hpt366: clean up DMA timeout handling for HPT370
  hpt366: merge HPT37x speedproc handlers
  hpt366: cache channel's MCR address
  hpt366: switch to using pci_get_slot
  ...

drivers/ide/Kconfig

@@ -167,6 +167,13 @@ config BLK_DEV_IDECS
 	  Support for Compact Flash cards, outboard IDE disks, tape drives,
 	  and CD-ROM drives connected through a PCMCIA card.
 
+config BLK_DEV_DELKIN
+	tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
+	depends on CARDBUS && PCI
+	help
+	  Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
+	  Adapters.  This may also work for similar SD and XD adapters.
+
 config BLK_DEV_IDECD
 	tristate "Include IDE/ATAPI CDROM support"
 	---help---
@@ -264,6 +271,13 @@ config BLK_DEV_IDESCSI
 	  If both this SCSI emulation and native ATAPI support are compiled
 	  into the kernel, the native support will be used.
 
+config BLK_DEV_IDEACPI
+	bool "IDE ACPI support"
+	depends on ACPI
+	---help---
+	  Implement ACPI support for generic IDE devices. On modern
+	  machines ACPI support is required to properly handle ACPI S3 states.
+
 config IDE_TASK_IOCTL
 	bool "IDE Taskfile Access"
 	help
@@ -606,6 +620,11 @@ config BLK_DEV_PIIX
 	  the kernel to change PIO, DMA and UDMA speeds and to configure
 	  the chip to optimum performance.
 
+config BLK_DEV_IT8213
+	tristate "IT8213 IDE support"
+	help
+	 This driver adds support for the ITE 8213 IDE controller.
+
 config BLK_DEV_IT821X
 	tristate "IT821X IDE support"
 	help
@@ -742,6 +761,11 @@ config BLK_DEV_VIA82CXXX
 	  This allows the kernel to change PIO, DMA and UDMA speeds and to
 	  configure the chip to optimum performance.
 
+config BLK_DEV_TC86C001
+	tristate "Toshiba TC86C001 support"
+	help
+	This driver adds support for Toshiba TC86C001 GOKU-S chip.
+
 endif
 
 config BLK_DEV_IDE_PMAC

drivers/ide/Makefile

@@ -22,6 +22,7 @@ ide-core-$(CONFIG_BLK_DEV_IDEPCI)	+= setup-pci.o
 ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o
 ide-core-$(CONFIG_PROC_FS)		+= ide-proc.o
 ide-core-$(CONFIG_BLK_DEV_IDEPNP)	+= ide-pnp.o
+ide-core-$(CONFIG_BLK_DEV_IDEACPI)	+= ide-acpi.o
 
 # built-in only drivers from arm/
 ide-core-$(CONFIG_IDE_ARM)		+= arm/ide_arm.o

drivers/ide/ide-probe.c

@@ -1384,6 +1384,9 @@ static int hwif_init(ide_hwif_t *hwif)
 
 done:
 	init_gendisk(hwif);
+
+	ide_acpi_init(hwif);
+
 	hwif->present = 1;	/* success */
 	return 1;
 

drivers/ide/ide.c

@@ -187,6 +187,12 @@ int noautodma = 1;
 
 EXPORT_SYMBOL(noautodma);
 
+#ifdef CONFIG_BLK_DEV_IDEACPI
+int ide_noacpi = 0;
+int ide_noacpitfs = 1;
+int ide_noacpionboot = 1;
+#endif
+
 /*
  * This is declared extern in ide.h, for access by other IDE modules:
  */
@@ -1214,10 +1220,15 @@ EXPORT_SYMBOL(system_bus_clock);
 static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 {
 	ide_drive_t *drive = dev->driver_data;
+	ide_hwif_t *hwif = HWIF(drive);
 	struct request rq;
 	struct request_pm_state rqpm;
 	ide_task_t args;
 
+	/* Call ACPI _GTM only once */
+	if (!(drive->dn % 2))
+		ide_acpi_get_timing(hwif);
+
 	memset(&rq, 0, sizeof(rq));
 	memset(&rqpm, 0, sizeof(rqpm));
 	memset(&args, 0, sizeof(args));
@@ -1235,10 +1246,17 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 static int generic_ide_resume(struct device *dev)
 {
 	ide_drive_t *drive = dev->driver_data;
+	ide_hwif_t *hwif = HWIF(drive);
 	struct request rq;
 	struct request_pm_state rqpm;
 	ide_task_t args;
 
+	/* Call ACPI _STM only once */
+	if (!(drive->dn % 2))
+		ide_acpi_push_timing(hwif);
+
+	ide_acpi_exec_tfs(drive);
+
 	memset(&rq, 0, sizeof(rq));
 	memset(&rqpm, 0, sizeof(rqpm));
 	memset(&args, 0, sizeof(args));
@@ -1543,6 +1561,24 @@ static int __init ide_setup(char *s)
 	}
 #endif /* CONFIG_BLK_DEV_IDEPCI */
 
+#ifdef CONFIG_BLK_DEV_IDEACPI
+	if (!strcmp(s, "ide=noacpi")) {
+		//printk(" : Disable IDE ACPI support.\n");
+		ide_noacpi = 1;
+		return 1;
+	}
+	if (!strcmp(s, "ide=acpigtf")) {
+		//printk(" : Enable IDE ACPI _GTF support.\n");
+		ide_noacpitfs = 0;
+		return 1;
+	}
+	if (!strcmp(s, "ide=acpionboot")) {
+		//printk(" : Call IDE ACPI methods on boot.\n");
+		ide_noacpionboot = 0;
+		return 1;
+	}
+#endif /* CONFIG_BLK_DEV_IDEACPI */
+
 	/*
 	 * Look for drive options:  "hdx="
 	 */

drivers/ide/pci/Makefile

@@ -9,9 +9,10 @@ obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
 obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
 obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
 obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
+obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
 obj-$(CONFIG_BLK_DEV_HPT34X)		+= hpt34x.o
 obj-$(CONFIG_BLK_DEV_HPT366)		+= hpt366.o
-#obj-$(CONFIG_BLK_DEV_HPT37X)		+= hpt37x.o
+obj-$(CONFIG_BLK_DEV_IT8213)		+= it8213.o
 obj-$(CONFIG_BLK_DEV_IT821X)		+= it821x.o
 obj-$(CONFIG_BLK_DEV_JMICRON)		+= jmicron.o
 obj-$(CONFIG_BLK_DEV_NS87415)		+= ns87415.o
@@ -26,6 +27,7 @@ obj-$(CONFIG_BLK_DEV_SIIMAGE)		+= siimage.o
 obj-$(CONFIG_BLK_DEV_SIS5513)		+= sis5513.o
 obj-$(CONFIG_BLK_DEV_SL82C105)		+= sl82c105.o
 obj-$(CONFIG_BLK_DEV_SLC90E66)		+= slc90e66.o
+obj-$(CONFIG_BLK_DEV_TC86C001)		+= tc86c001.o
 obj-$(CONFIG_BLK_DEV_TRIFLEX)		+= triflex.o
 obj-$(CONFIG_BLK_DEV_TRM290)		+= trm290.o
 obj-$(CONFIG_BLK_DEV_VIA82CXXX)		+= via82cxxx.o

drivers/ide/pci/delkin_cb.c

+/*
+ *  linux/drivers/ide/pci/delkin_cb.c
+ *
+ *  Created 20 Oct 2004 by Mark Lord
+ *
+ *  Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
+ *
+ *  Modeled after the 16-bit PCMCIA driver: ide-cs.c
+ *
+ *  This is slightly peculiar, in that it is a PCI driver,
+ *  but is NOT an IDE PCI driver -- the IDE layer does not directly
+ *  support hot insertion/removal of PCI interfaces, so this driver
+ *  is unable to use the IDE PCI interfaces.  Instead, it uses the
+ *  same interfaces as the ide-cs (PCMCIA) driver uses.
+ *  On the plus side, the driver is also smaller/simpler this way.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+/*
+ * No chip documentation has yet been found,
+ * so these configuration values were pulled from
+ * a running Win98 system using "debug".
+ * This gives around 3MByte/second read performance,
+ * which is about 2/3 of what the chip is capable of.
+ *
+ * There is also a 4KByte mmio region on the card,
+ * but its purpose has yet to be reverse-engineered.
+ */
+static const u8 setup[] = {
+	0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
+	0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
+};
+
+static int __devinit
+delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
+{
+	unsigned long base;
+	hw_regs_t hw;
+	ide_hwif_t *hwif = NULL;
+	ide_drive_t *drive;
+	int i, rc;
+
+	rc = pci_enable_device(dev);
+	if (rc) {
+		printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
+		return rc;
+	}
+	rc = pci_request_regions(dev, "delkin_cb");
+	if (rc) {
+		printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
+		pci_disable_device(dev);
+		return rc;
+	}
+	base = pci_resource_start(dev, 0);
+	outb(0x02, base + 0x1e);	/* set nIEN to block interrupts */
+	inb(base + 0x17);		/* read status to clear interrupts */
+	for (i = 0; i < sizeof(setup); ++i) {
+		if (setup[i])
+			outb(setup[i], base + i);
+	}
+	pci_release_regions(dev);	/* IDE layer handles regions itself */
+
+	memset(&hw, 0, sizeof(hw));
+	ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
+	hw.irq = dev->irq;
+	hw.chipset = ide_pci;		/* this enables IRQ sharing */
+
+	rc = ide_register_hw_with_fixup(&hw, &hwif, ide_undecoded_slave);
+	if (rc < 0) {
+		printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc);
+		pci_disable_device(dev);
+		return -ENODEV;
+	}
+	pci_set_drvdata(dev, hwif);
+	hwif->pci_dev = dev;
+	drive = &hwif->drives[0];
+	if (drive->present) {
+		drive->io_32bit = 1;
+		drive->unmask   = 1;
+	}
+	return 0;
+}
+
+static void
+delkin_cb_remove (struct pci_dev *dev)
+{
+	ide_hwif_t *hwif = pci_get_drvdata(dev);
+
+	if (hwif)
+		ide_unregister(hwif->index);
+	pci_disable_device(dev);
+}
+
+static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
+	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
+
+static struct pci_driver driver = {
+	.name		= "Delkin-ASKA-Workbit Cardbus IDE",
+	.id_table	= delkin_cb_pci_tbl,
+	.probe		= delkin_cb_probe,
+	.remove		= delkin_cb_remove,
+};
+
+static int
+delkin_cb_init (void)
+{
+	return pci_module_init(&driver);
+}
+
+static void
+delkin_cb_exit (void)
+{
+	pci_unregister_driver(&driver);
+}
+
+module_init(delkin_cb_init);
+module_exit(delkin_cb_exit);
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
+MODULE_LICENSE("GPL");
+

drivers/ide/pci/it8213.c

+/*
+ * ITE 8213 IDE driver
+ *
+ * Copyright (C) 2006 Jack Lee
+ * Copyright (C) 2006 Alan Cox
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+/*
+ *	it8213_ratemask	-	Compute available modes
+ *	@drive: IDE drive
+ *
+ *	Compute the available speeds for the devices on the interface. This
+ *	is all modes to ATA133 clipped by drive cable setup.
+ */
+
+static u8 it8213_ratemask (ide_drive_t *drive)
+{
+	u8 mode	= 4;
+	if (!eighty_ninty_three(drive))
+		mode = min_t(u8, mode, 1);
+	return mode;
+}
+
+/**
+ *	it8213_dma_2_pio		-	return the PIO mode matching DMA
+ *	@xfer_rate: transfer speed
+ *
+ *	Returns the nearest equivalent PIO timing for the PIO or DMA
+ *	mode requested by the controller.
+ */
+
+static u8 it8213_dma_2_pio (u8 xfer_rate) {
+	switch(xfer_rate) {
+		case XFER_UDMA_6:
+		case XFER_UDMA_5:
+		case XFER_UDMA_4:
+		case XFER_UDMA_3:
+		case XFER_UDMA_2:
+		case XFER_UDMA_1:
+		case XFER_UDMA_0:
+		case XFER_MW_DMA_2:
+		case XFER_PIO_4:
+			return 4;
+		case XFER_MW_DMA_1:
+		case XFER_PIO_3:
+			return 3;
+		case XFER_SW_DMA_2:
+		case XFER_PIO_2:
+			return 2;
+		case XFER_MW_DMA_0:
+		case XFER_SW_DMA_1:
+		case XFER_SW_DMA_0:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+		case XFER_PIO_SLOW:
+		default:
+			return 0;
+	}
+}
+
+/*
+ *	it8213_tuneproc	-	tune a drive
+ *	@drive: drive to tune
+ *	@pio: desired PIO mode
+ *
+ *	Set the interface PIO mode.
+ */
+
+static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= hwif->pci_dev;
+	int is_slave		= drive->dn & 1;
+	int master_port		= 0x40;
+	int slave_port		= 0x44;
+	unsigned long flags;
+	u16 master_data;
+	u8 slave_data;
+	static DEFINE_SPINLOCK(tune_lock);
+	int control = 0;
+
+	static const u8 timings[][2]= {
+					{ 0, 0 },
+					{ 0, 0 },
+					{ 1, 0 },
+					{ 2, 1 },
+					{ 2, 3 }, };
+
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+
+	spin_lock_irqsave(&tune_lock, flags);
+	pci_read_config_word(dev, master_port, &master_data);
+
+	if (pio > 1)
+		control |= 1;	/* Programmable timing on */
+	if (drive->media != ide_disk)
+		control |= 4;	/* ATAPI */
+	if (pio > 2)
+		control |= 2;	/* IORDY */
+	if (is_slave) {
+		master_data |=  0x4000;
+		master_data &= ~0x0070;
+		if (pio > 1)
+			master_data = master_data | (control << 4);
+		pci_read_config_byte(dev, slave_port, &slave_data);
+		slave_data = slave_data & 0xf0;
+		slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1];
+	} else {
+		master_data &= ~0x3307;
+		if (pio > 1)
+			master_data = master_data | control;
+		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+	}
+	pci_write_config_word(dev, master_port, master_data);
+	if (is_slave)
+		pci_write_config_byte(dev, slave_port, slave_data);
+	spin_unlock_irqrestore(&tune_lock, flags);
+}
+
+/**
+ *	it8213_tune_chipset	-	set controller timings
+ *	@drive: Drive to set up
+ *	@xferspeed: speed we want to achieve
+ *
+ *	Tune the ITE chipset for the desired mode. If we can't achieve
+ *	the desired mode then tune for a lower one, but ultimately
+ *	make the thing work.
+ */
+
+static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= hwif->pci_dev;
+	u8 maslave		= 0x40;
+	u8 speed		= ide_rate_filter(it8213_ratemask(drive), xferspeed);
+	int a_speed		= 3 << (drive->dn * 4);
+	int u_flag		= 1 << drive->dn;
+	int v_flag		= 0x01 << drive->dn;
+	int w_flag		= 0x10 << drive->dn;
+	int u_speed		= 0;
+	u16			reg4042, reg4a;
+	u8			reg48, reg54, reg55;
+
+	pci_read_config_word(dev, maslave, &reg4042);
+	pci_read_config_byte(dev, 0x48, &reg48);
+	pci_read_config_word(dev, 0x4a, &reg4a);
+	pci_read_config_byte(dev, 0x54, &reg54);
+	pci_read_config_byte(dev, 0x55, &reg55);
+
+	switch(speed) {
+		case XFER_UDMA_6:
+		case XFER_UDMA_4:
+		case XFER_UDMA_2:	u_speed = 2 << (drive->dn * 4); break;
+		case XFER_UDMA_5:
+		case XFER_UDMA_3:
+		case XFER_UDMA_1:	u_speed = 1 << (drive->dn * 4); break;
+		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
+			break;
+		case XFER_MW_DMA_2:
+		case XFER_MW_DMA_1:
+		case XFER_SW_DMA_2:
+			break;
+		case XFER_PIO_4:
+		case XFER_PIO_3:
+		case XFER_PIO_2:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+			break;
+		default:
+			return -1;
+	}
+
+	if (speed >= XFER_UDMA_0) {
+		if (!(reg48 & u_flag))
+			pci_write_config_byte(dev, 0x48, reg48 | u_flag);
+		if (speed >= XFER_UDMA_5) {
+			pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
+		} else {
+			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
+		}
+
+		if ((reg4a & a_speed) != u_speed)
+			pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
+		if (speed > XFER_UDMA_2) {
+			if (!(reg54 & v_flag))
+				pci_write_config_byte(dev, 0x54, reg54 | v_flag);
+		} else
+			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
+	} else {
+		if (reg48 & u_flag)
+			pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
+		if (reg4a & a_speed)
+			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
+		if (reg54 & v_flag)
+			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
+		if (reg55 & w_flag)
+			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
+	}
+	it8213_tuneproc(drive, it8213_dma_2_pio(speed));
+	return ide_config_drive_speed(drive, speed);
+}
+
+/*
+ *	config_chipset_for_dma	-	configure for DMA
+ *	@drive: drive to configure
+ *
+ *	Called by the IDE layer when it wants the timings set up.
+ */
+
+static int config_chipset_for_dma (ide_drive_t *drive)
+{
+	u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
+
+	if (!speed)
+		return 0;
+
+	it8213_tune_chipset(drive, speed);
+
+	return ide_dma_enable(drive);
+}
+
+/**
+ *	it8213_configure_drive_for_dma	-	set up for DMA transfers
+ *	@drive: drive we are going to set up
+ *
+ *	Set up the drive for DMA, tune the controller and drive as
+ *	required. If the drive isn't suitable for DMA or we hit
+ *	other problems then we will drop down to PIO and set up
+ *	PIO appropriately
+ */
+
+static int it8213_config_drive_for_dma (ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+
+	if (ide_use_dma(drive)) {
+		if (config_chipset_for_dma(drive))
+			return hwif->ide_dma_on(drive);
+	}
+
+	hwif->speedproc(drive, XFER_PIO_0
+			+ ide_get_best_pio_mode(drive, 255, 4, NULL));
+
+ 	return hwif->ide_dma_off_quietly(drive);
+}
+
+/**
+ *	init_hwif_it8213	-	set up hwif structs
+ *	@hwif: interface to set up
+ *
+ *	We do the basic set up of the interface structure. The IT8212
+ *	requires several custom handlers so we override the default
+ *	ide DMA handlers appropriately
+ */
+
+static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
+{
+	u8 reg42h = 0, ata66 = 0;
+
+	hwif->speedproc = &it8213_tune_chipset;
+	hwif->tuneproc	= &it8213_tuneproc;
+
+	hwif->autodma = 0;
+
+	hwif->drives[0].autotune = 1;
+	hwif->drives[1].autotune = 1;
+
+	if (!hwif->dma_base)
+		return;
+
+	hwif->atapi_dma = 1;
+	hwif->ultra_mask = 0x7f;
+	hwif->mwdma_mask = 0x06;
+	hwif->swdma_mask = 0x04;
+
+	pci_read_config_byte(hwif->pci_dev, 0x42, &reg42h);
+	ata66 = (reg42h & 0x02) ? 0 : 1;
+
+	hwif->ide_dma_check = &it8213_config_drive_for_dma;
+	if (!(hwif->udma_four))
+		hwif->udma_four = ata66;
+
+	/*
+	 *	The BIOS often doesn't set up DMA on this controller
+	 *	so we always do it.
+	 */
+	if (!noautodma)
+		hwif->autodma = 1;
+
+	hwif->drives[0].autodma = hwif->autodma;
+	hwif->drives[1].autodma = hwif->autodma;
+}
+
+
+#define DECLARE_ITE_DEV(name_str)			\
+	{						\
+		.name		= name_str,		\
+		.init_hwif	= init_hwif_it8213,	\
+		.channels	= 1,			\
+		.autodma	= AUTODMA,		\
+		.enablebits	= {{0x41,0x80,0x80}}, \
+		.bootable	= ON_BOARD,		\
+	}
+
+static ide_pci_device_t it8213_chipsets[] __devinitdata = {
+	/* 0 */ DECLARE_ITE_DEV("IT8213"),
+};
+
+
+/**
+ *	it8213_init_one	-	pci layer discovery entry
+ *	@dev: PCI device
+ *	@id: ident table entry
+ *
+ *	Called by the PCI code when it finds an ITE8213 controller. As
+ *	this device follows the standard interfaces we can use the
+ *	standard helper functions to do almost all the work for us.
+ */
+
+static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
+	return 0;
+}
+
+
+static struct pci_device_id it8213_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ITE, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
+
+static struct pci_driver driver = {
+	.name		= "ITE8213_IDE",
+	.id_table	= it8213_pci_tbl,
+	.probe		= it8213_init_one,
+};
+
+static int __init it8213_ide_init(void)
+{
+	return ide_pci_register_driver(&driver);
+}
+
+module_init(it8213_ide_init);
+
+MODULE_AUTHOR("Jack Lee, Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
+MODULE_LICENSE("GPL");

drivers/ide/pci/pdc202xx_new.c

@@ -92,26 +92,6 @@ static u8 pdcnew_ratemask(ide_drive_t *drive)
 	return	mode;
 }
 
-static int check_in_drive_lists(ide_drive_t *drive, const char **list)
-{
-	struct hd_driveid *id = drive->id;
-
-	if (pdc_quirk_drives == list) {
-		while (*list) {
-			if (strstr(id->model, *list++)) {
-				return 2;
-			}
-		}
-	} else {
-		while (*list) {
-			if (!strcmp(*list++,id->model)) {
-				return 1;
-			}
-		}
-	}
-	return 0;
-}
-
 /**
  * get_indexed_reg - Get indexed register
  * @hwif: for the port address
@@ -249,13 +229,6 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
 	return err;
 }
 
-/*   0    1    2    3    4    5    6   7   8
- * 960, 480, 390, 300, 240, 180, 120, 90, 60
- *           180, 150, 120,  90,  60
- * DMA_Speed
- * 180, 120,  90,  90,  90,  60,  30
- *  11,   5,   4,   3,   2,   1,   0
- */
 static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
 {
 	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
@@ -313,12 +286,10 @@ static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
 
 	drive->init_speed = 0;
 
-	if (id && (id->capability & 1) && drive->autodma) {
+	if ((id->capability & 1) && drive->autodma) {
 
-		if (ide_use_dma(drive)) {
-			if (config_chipset_for_dma(drive))
-				return hwif->ide_dma_on(drive);
-		}
+		if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+			return hwif->ide_dma_on(drive);
 
 		goto fast_ata_pio;
 
@@ -333,21 +304,12 @@ fast_ata_pio:
 
 static int pdcnew_quirkproc(ide_drive_t *drive)
 {
-	return check_in_drive_lists(drive, pdc_quirk_drives);
-}
+	const char **list, *model = drive->id->model;
 
-static int pdcnew_ide_dma_lostirq(ide_drive_t *drive)
-{
-	if (HWIF(drive)->resetproc != NULL)
-		HWIF(drive)->resetproc(drive);
-	return __ide_dma_lostirq(drive);
-}
-
-static int pdcnew_ide_dma_timeout(ide_drive_t *drive)
-{
-	if (HWIF(drive)->resetproc != NULL)
-		HWIF(drive)->resetproc(drive);
-	return __ide_dma_timeout(drive);
+	for (list = pdc_quirk_drives; *list != NULL; list++)
+		if (strstr(model, *list) != NULL)
+			return 2;
+	return 0;
 }
 
 static void pdcnew_reset(ide_drive_t *drive)
@@ -599,8 +561,6 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 	hwif->err_stops_fifo = 1;
 
 	hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
-	hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq;
-	hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout;
 
 	if (!hwif->udma_four)
 		hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;

drivers/ide/pci/pdc202xx_old.c

@@ -123,26 +123,6 @@ static u8 pdc202xx_ratemask (ide_drive_t *drive)
 	return mode;
 }
 
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
-{
-	struct hd_driveid *id = drive->id;
-
-	if (pdc_quirk_drives == list) {
-		while (*list) {
-			if (strstr(id->model, *list++)) {
-				return 2;
-			}
-		}
-	} else {
-		while (*list) {
-			if (!strcmp(*list++,id->model)) {
-				return 1;
-			}
-		}
-	}
-	return 0;
-}
-
 static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
@@ -377,7 +357,12 @@ fast_ata_pio:
 
 static int pdc202xx_quirkproc (ide_drive_t *drive)
 {
-	return ((int) check_in_drive_lists(drive, pdc_quirk_drives));
+	const char **list, *model = drive->id->model;
+
+	for (list = pdc_quirk_drives; *list != NULL; list++)
+		if (strstr(model, *list) != NULL)
+			return 2;
+	return 0;
 }
 
 static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)

drivers/ide/pci/piix.c

 /*
- *  linux/drivers/ide/pci/piix.c	Version 0.45	May 12, 2006
+ *  linux/drivers/ide/pci/piix.c	Version 0.46	December 3, 2006
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -163,7 +163,7 @@ static u8 piix_ratemask (ide_drive_t *drive)
 	 *	if the drive cannot see an 80pin cable.
 	 */
 	if (!eighty_ninty_three(drive))
-		mode = min(mode, (u8)1);
+		mode = min_t(u8, mode, 1);
 	return mode;
 }
 
@@ -216,7 +216,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
-	int is_slave		= (&hwif->drives[1] == drive);
+	int is_slave		= drive->dn & 1;
 	int master_port		= hwif->channel ? 0x42 : 0x40;
 	int slave_port		= 0x44;
 	unsigned long flags;
@@ -225,7 +225,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 	static DEFINE_SPINLOCK(tune_lock);
 	int control = 0;
 
-				 /* ISP  RTC */
+				     /* ISP  RTC */
 	static const u8 timings[][2]= {
 					{ 0, 0 },
 					{ 0, 0 },
@@ -233,7 +233,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
 
 	/*
 	 * Master vs slave is synchronized above us but the slave register is
@@ -243,25 +243,24 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 	spin_lock_irqsave(&tune_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
 
-	if (pio >= 2)
+	if (pio > 1)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media == ide_disk)
 		control |= 4;	/* Prefetch, post write */
-	if (pio >= 3)
+	if (pio > 2)
 		control |= 2;	/* IORDY */
 	if (is_slave) {
-		master_data = master_data | 0x4000;
+		master_data |=  0x4000;
+		master_data &= ~0x0070;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
 			master_data = master_data | (control << 4);
-		} else {
-			master_data &= ~0x0070;
 		}
 		pci_read_config_byte(dev, slave_port, &slave_data);
 		slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
 		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
 	} else {
-		master_data = master_data & 0xccf8;
+		master_data &= ~0x3307;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
 			master_data = master_data | control;
@@ -539,13 +538,19 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = {
 	/*  0 */ DECLARE_PIIX_DEV("PIIXa"),
 	/*  1 */ DECLARE_PIIX_DEV("PIIXb"),
 
-	{	/* 2 */
+	/*  2 */
+	{	/*
+		 * MPIIX actually has only a single IDE channel mapped to
+		 * the primary or secondary ports depending on the value
+		 * of the bit 14 of the IDETIM register at offset 0x6c
+		 */
 		.name		= "MPIIX",
 		.init_hwif	= init_hwif_piix,
 		.channels	= 2,
 		.autodma	= NODMA,
-		.enablebits	= {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}},
+		.enablebits	= {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
 		.bootable	= ON_BOARD,
+		.flags		= IDEPCI_FLAG_ISA_PORTS
 	},
 
 	/*  3 */ DECLARE_PIIX_DEV("PIIX3"),

drivers/ide/pci/slc90e66.c

 /*
- *  linux/drivers/ide/pci/slc90e66.c	Version 0.12	May 12, 2006
+ *  linux/drivers/ide/pci/slc90e66.c	Version 0.13	December 30, 2006
  *
  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
@@ -26,7 +26,7 @@ static u8 slc90e66_ratemask (ide_drive_t *drive)
 	u8 mode	= 2;
 
 	if (!eighty_ninty_three(drive))
-		mode = min(mode, (u8)1);
+		mode = min_t(u8, mode, 1);
 	return mode;
 }
 
@@ -65,36 +65,47 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
-	int is_slave		= (&hwif->drives[1] == drive);
+	int is_slave		= drive->dn & 1;
 	int master_port		= hwif->channel ? 0x42 : 0x40;
 	int slave_port		= 0x44;
 	unsigned long flags;
 	u16 master_data;
 	u8 slave_data;
-				 /* ISP  RTC */
+ 	int control = 0;
+				     /* ISP  RTC */
 	static const u8 timings[][2]= {
-				    { 0, 0 },
-				    { 0, 0 },
-				    { 1, 0 },
-				    { 2, 1 },
-				    { 2, 3 }, };
+					{ 0, 0 },
+					{ 0, 0 },
+					{ 1, 0 },
+					{ 2, 1 },
+					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
 	spin_lock_irqsave(&ide_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
+
+	if (pio > 1)
+		control |= 1;	/* Programmable timing on */
+	if (drive->media == ide_disk)
+		control |= 4;	/* Prefetch, post write */
+	if (pio > 2)
+		control |= 2;	/* IORDY */
 	if (is_slave) {
-		master_data = master_data | 0x4000;
-		if (pio > 1)
+		master_data |=  0x4000;
+		master_data &= ~0x0070;
+		if (pio > 1) {
 			/* enable PPE, IE and TIME */
-			master_data = master_data | 0x0070;
+			master_data = master_data | (control << 4);
+		}
 		pci_read_config_byte(dev, slave_port, &slave_data);
 		slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
 		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
 	} else {
-		master_data = master_data & 0xccf8;
-		if (pio > 1)
+		master_data &= ~0x3307;
+		if (pio > 1) {
 			/* enable PPE, IE and TIME */
-			master_data = master_data | 0x0007;
+			master_data = master_data | control;
+		}
 		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
 	}
 	pci_write_config_word(dev, master_port, master_data);
@@ -173,7 +184,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
 
 	drive->init_speed = 0;
 
-	if (id && (id->capability & 1) && drive->autodma) {
+	if ((id->capability & 1) && drive->autodma) {
 
 		if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
 			return hwif->ide_dma_on(drive);
@@ -201,7 +212,7 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
 		hwif->irq = hwif->channel ? 15 : 14;
 
 	hwif->speedproc = &slc90e66_tune_chipset;
-	hwif->tuneproc = &slc90e66_tune_drive;
+	hwif->tuneproc	= &slc90e66_tune_drive;
 
 	pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);
 
@@ -213,14 +224,16 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
 
 	hwif->atapi_dma = 1;
 	hwif->ultra_mask = 0x1f;
-	hwif->mwdma_mask = 0x07;
-	hwif->swdma_mask = 0x07;
+	hwif->mwdma_mask = 0x06;
+	hwif->swdma_mask = 0x04;
 
-	if (!(hwif->udma_four))
+	if (!hwif->udma_four) {
 		/* bit[0(1)]: 0:80, 1:40 */
 		hwif->udma_four = (reg47 & mask) ? 0 : 1;
+	}
 
 	hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate;
+
 	if (!noautodma)
 		hwif->autodma = 1;
 	hwif->drives[0].autodma = hwif->autodma;

drivers/ide/pci/tc86c001.c

+/*
+ * drivers/ide/pci/tc86c001.c	Version 1.00	Dec 12, 2006
+ *
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+static inline u8 tc86c001_ratemask(ide_drive_t *drive)
+{
+	return eighty_ninty_three(drive) ? 2 : 1;
+}
+
+static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
+	u16 mode, scr		= hwif->INW(scr_port);
+
+	speed = ide_rate_filter(tc86c001_ratemask(drive), speed);
+
+	switch (speed) {
+		case XFER_UDMA_4:	mode = 0x00c0; break;
+		case XFER_UDMA_3:	mode = 0x00b0; break;
+		case XFER_UDMA_2:	mode = 0x00a0; break;
+		case XFER_UDMA_1:	mode = 0x0090; break;
+		case XFER_UDMA_0:	mode = 0x0080; break;
+		case XFER_MW_DMA_2:	mode = 0x0070; break;
+		case XFER_MW_DMA_1:	mode = 0x0060; break;
+		case XFER_MW_DMA_0:	mode = 0x0050; break;
+		case XFER_PIO_4:	mode = 0x0400; break;
+		case XFER_PIO_3:	mode = 0x0300; break;
+		case XFER_PIO_2:	mode = 0x0200; break;
+		case XFER_PIO_1:	mode = 0x0100; break;
+		case XFER_PIO_0:
+		default:		mode = 0x0000; break;
+	}
+
+	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
+	scr |= mode;
+	hwif->OUTW(scr, scr_port);
+
+	return ide_config_drive_speed(drive, speed);
+}
+
+static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
+{
+	pio =  ide_get_best_pio_mode(drive, pio, 4, NULL);
+	(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
+}
+
+/*
+ * HACKITY HACK
+ *
+ * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
+ * if a DMA transfer terminates prematurely, the controller leaves the device's
+ * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
+ * set the interrupt bit in the DMA status register), thus no PCI interrupt
+ * will occur until a DMA transfer has been successfully completed.
+ *
+ * We work around this by initiating dummy, zero-length DMA transfer on
+ * a DMA timeout expiration. I found no better way to do this with the current
+ * IDE core than to temporarily replace a higher level driver's timer expiry
+ * handler with our own backing up to that handler in case our recovery fails.
+ */
+static int tc86c001_timer_expiry(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
+	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
+	u8 dma_stat		= hwif->INB(hwif->dma_status);
+
+	/* Restore a higher level driver's expiry handler first. */
+	hwgroup->expiry	= expiry;
+
+	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
+		unsigned long sc_base	= hwif->config_data;
+		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
+		u8 dma_cmd		= hwif->INB(hwif->dma_command);
+
+		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
+		       "attempting recovery...\n", drive->name);
+
+		/* Stop DMA */
+		hwif->OUTB(dma_cmd & ~0x01, hwif->dma_command);
+
+		/* Setup the dummy DMA transfer */
+		hwif->OUTW(0, sc_base + 0x0a);	/* Sector Count */
+		hwif->OUTW(0, twcr_port);	/* Transfer Word Count 1 or 2 */
+
+		/* Start the dummy DMA transfer */
+		hwif->OUTB(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
+		hwif->OUTB(0x01, hwif->dma_command); /* set START_STOPBM */
+
+		/*
+		 * If an interrupt was pending, it should come thru shortly.
+		 * If not, a higher level driver's expiry handler should
+		 * eventually cause some kind of recovery from the DMA stall.
+		 */
+		return WAIT_MIN_SLEEP;
+	}
+
+	/* Chain to the restored expiry handler if DMA wasn't active. */
+	if (likely(expiry != NULL))
+		return expiry(drive);
+
+	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
+	return -1;
+}
+
+static void tc86c001_dma_start(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
+	unsigned long sc_base	= hwif->config_data;
+	unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
+	unsigned long nsectors	= hwgroup->rq->nr_sectors;
+
+	/*
+	 * We have to manually load the sector count and size into
+	 * the appropriate system control registers for DMA to work
+	 * with LBA48 and ATAPI devices...
+	 */
+	hwif->OUTW(nsectors, sc_base + 0x0a);	/* Sector Count */
+	hwif->OUTW(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
+
+	/* Install our timeout expiry hook, saving the current handler... */
+	ide_set_hwifdata(hwif, hwgroup->expiry);
+	hwgroup->expiry = &tc86c001_timer_expiry;
+
+	ide_dma_start(drive);
+}
+
+static int tc86c001_busproc(ide_drive_t *drive, int state)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned long sc_base	= hwif->config_data;
+	u16 scr1;
+
+	/* System Control 1 Register bit 11 (ATA Hard Reset) read */
+	scr1 = hwif->INW(sc_base + 0x00);
+
+	switch (state) {
+		case BUSSTATE_ON:
+			if (!(scr1 & 0x0800))
+				return 0;
+			scr1 &= ~0x0800;
+
+			hwif->drives[0].failures = hwif->drives[1].failures = 0;
+			break;
+		case BUSSTATE_OFF:
+			if (scr1 & 0x0800)
+				return 0;
+			scr1 |= 0x0800;
+
+			hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
+			hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	/* System Control 1 Register bit 11 (ATA Hard Reset) write */
+	hwif->OUTW(scr1, sc_base + 0x00);
+	return 0;
+}
+
+static int config_chipset_for_dma(ide_drive_t *drive)
+{
+	u8 speed = ide_dma_speed(drive, tc86c001_ratemask(drive));
+
+	if (!speed)
+		return 0;
+
+	(void) tc86c001_tune_chipset(drive, speed);
+	return ide_dma_enable(drive);
+}
+
+static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct hd_driveid *id	= drive->id;
+
+	if ((id->capability & 1) && drive->autodma) {
+
+		if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+			return hwif->ide_dma_on(drive);
+
+		goto fast_ata_pio;
+
+	} else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+		tc86c001_tune_drive(drive, 255);
+		return hwif->ide_dma_off_quietly(drive);
+	}
+	/* IORDY not supported */
+	return 0;
+}
+
+static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
+{
+	unsigned long sc_base	= pci_resource_start(hwif->pci_dev, 5);
+	u16 scr1		= hwif->INW(sc_base + 0x00);;
+
+	/* System Control 1 Register bit 15 (Soft Reset) set */
+	hwif->OUTW(scr1 |  0x8000, sc_base + 0x00);
+
+	/* System Control 1 Register bit 14 (FIFO Reset) set */
+	hwif->OUTW(scr1 |  0x4000, sc_base + 0x00);
+
+	/* System Control 1 Register: reset clear */
+	hwif->OUTW(scr1 & ~0xc000, sc_base + 0x00);
+
+	/* Store the system control register base for convenience... */
+	hwif->config_data = sc_base;
+
+	hwif->tuneproc	= &tc86c001_tune_drive;
+	hwif->speedproc = &tc86c001_tune_chipset;
+	hwif->busproc	= &tc86c001_busproc;
+
+	hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+	if (!hwif->dma_base)
+		return;
+
+	/*
+	 * Sector Count Control Register bits 0 and 1 set:
+	 * software sets Sector Count Register for master and slave device
+	 */
+	hwif->OUTW(0x0003, sc_base + 0x0c);
+
+	/* Sector Count Register limit */
+	hwif->rqsize	 = 0xffff;
+
+	hwif->atapi_dma  = 1;
+	hwif->ultra_mask = 0x1f;
+	hwif->mwdma_mask = 0x07;
+
+	hwif->ide_dma_check	= &tc86c001_config_drive_xfer_rate;
+	hwif->dma_start 	= &tc86c001_dma_start;
+
+	if (!hwif->udma_four) {
+		/*
+		 * System Control  1 Register bit 13 (PDIAGN):
+		 * 0=80-pin cable, 1=40-pin cable
+		 */
+		scr1 = hwif->INW(sc_base + 0x00);
+		hwif->udma_four = (scr1 & 0x2000) ? 0 : 1;
+	}
+
+	if (!noautodma)
+		hwif->autodma = 1;
+	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
+}
+
+static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
+							const char *name)
+{
+	int err = pci_request_region(dev, 5, name);
+
+	if (err)
+		printk(KERN_ERR "%s: system control regs already in use", name);
+	return err;
+}
+
+static ide_pci_device_t tc86c001_chipset __devinitdata = {
+	.name		= "TC86C001",
+	.init_chipset	= init_chipset_tc86c001,
+	.init_hwif	= init_hwif_tc86c001,
+	.channels	= 1,
+	.autodma	= AUTODMA,
+	.bootable	= OFF_BOARD
+};
+
+static int __devinit tc86c001_init_one(struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	return ide_setup_pci_device(dev, &tc86c001_chipset);
+}
+
+static struct pci_device_id tc86c001_pci_tbl[] = {
+	{ PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
+
+static struct pci_driver driver = {
+	.name		= "TC86C001",
+	.id_table	= tc86c001_pci_tbl,
+	.probe		= tc86c001_init_one
+};
+
+static int __init tc86c001_ide_init(void)
+{
+	return ide_pci_register_driver(&driver);
+}
+module_init(tc86c001_ide_init);
+
+MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
+MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
+MODULE_LICENSE("GPL");

drivers/pci/quirks.c

@@ -1460,6 +1460,24 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2609, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260a, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
+/*
+ * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+ * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+ * Re-allocate the region if needed...
+ */
+static void __init quirk_tc86c001_ide(struct pci_dev *dev)
+{
+	struct resource *r = &dev->resource[0];
+
+	if (r->start & 0x8) {
+		r->start = 0;
+		r->end = 0xf;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
+			 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
+			 quirk_tc86c001_ide);
+
 static void __devinit quirk_netmos(struct pci_dev *dev)
 {
 	unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;

include/linux/ide.h

@@ -18,6 +18,9 @@
 #include <linux/device.h>
 #include <linux/pci.h>
 #include <linux/completion.h>
+#ifdef CONFIG_BLK_DEV_IDEACPI
+#include <acpi/acpi.h>
+#endif
 #include <asm/byteorder.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -541,6 +544,11 @@ typedef enum {
 struct ide_driver_s;
 struct ide_settings_s;
 
+#ifdef CONFIG_BLK_DEV_IDEACPI
+struct ide_acpi_drive_link;
+struct ide_acpi_hwif_link;
+#endif
+
 typedef struct ide_drive_s {
 	char		name[4];	/* drive name, such as "hda" */
         char            driver_req[10];	/* requests specific driver */
@@ -637,6 +645,9 @@ typedef struct ide_drive_s {
 
 	int		lun;		/* logical unit */
 	int		crc_count;	/* crc counter to reduce drive speed */
+#ifdef CONFIG_BLK_DEV_IDEACPI
+	struct ide_acpi_drive_link *acpidata;
+#endif
 	struct list_head list;
 	struct device	gendev;
 	struct completion gendev_rel_comp;	/* to deal with device release() */
@@ -804,6 +815,10 @@ typedef struct hwif_s {
 	void		*hwif_data;	/* extra hwif data */
 
 	unsigned dma;
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+	struct ide_acpi_hwif_link *acpidata;
+#endif
 } ____cacheline_internodealigned_in_smp ide_hwif_t;
 
 /*
@@ -1298,6 +1313,18 @@ static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
 static inline void ide_release_dma(ide_hwif_t *drive) {;}
 #endif
 
+#ifdef CONFIG_BLK_DEV_IDEACPI
+extern int ide_acpi_exec_tfs(ide_drive_t *drive);
+extern void ide_acpi_get_timing(ide_hwif_t *hwif);
+extern void ide_acpi_push_timing(ide_hwif_t *hwif);
+extern void ide_acpi_init(ide_hwif_t *hwif);
+#else
+static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
+static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
+#endif
+
 extern int ide_hwif_request_regions(ide_hwif_t *hwif);
 extern void ide_hwif_release_regions(ide_hwif_t* hwif);
 extern void ide_unregister (unsigned int index);

include/linux/pci_ids.h

@@ -1454,6 +1454,7 @@
 
 #define PCI_VENDOR_ID_TOSHIBA_2		0x102f
 #define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE	0x0105
 #define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
 #define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3