ppc64: Use arch/powerpc/platforms/powermac for powermac build.

This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac
instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files.
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/Makefile

 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
+else
+ifeq ($(CONFIG_PPC64),y)
+obj-$(CONFIG_PPC_PMAC)		+= powermac/
+endif
 endif
 obj-$(CONFIG_4xx)		+= 4xx/
 obj-$(CONFIG_85xx)		+= 85xx/

arch/ppc64/kernel/Makefile

@@ -56,11 +56,7 @@ obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_XICS)		+= xics.o
 
-ifneq ($(CONFIG_PPC_MERGE),y)
-obj-$(CONFIG_PPC_PMAC)		+= pmac_setup.o pmac_feature.o pmac_pci.o \
-				   pmac_time.o pmac_nvram.o pmac_low_i2c.o \
-				   udbg_scc.o
-endif
+obj-$(CONFIG_PPC_PMAC)		+= udbg_scc.o
 
 obj-$(CONFIG_PPC_MAPLE)		+= maple_setup.o maple_pci.o maple_time.o \
 				   udbg_16550.o
@@ -68,9 +64,7 @@ obj-$(CONFIG_PPC_MAPLE)		+= maple_setup.o maple_pci.o maple_time.o \
 obj-$(CONFIG_U3_DART)		+= u3_iommu.o
 
 ifdef CONFIG_SMP
-ifneq ($(CONFIG_PPC_MERGE),y)
-obj-$(CONFIG_PPC_PMAC)		+= pmac_smp.o smp-tbsync.o
-endif
+obj-$(CONFIG_PPC_PMAC)		+= smp-tbsync.o
 obj-$(CONFIG_PPC_MAPLE)		+= smp-tbsync.o
 endif
 

arch/ppc64/kernel/pmac.h

-#ifndef __PMAC_H__
-#define __PMAC_H__
-
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-/*
- * Declaration for the various functions exported by the
- * pmac_* files. Mostly for use by pmac_setup
- */
-
-extern unsigned long pmac_get_boot_time(void);
-extern void pmac_get_rtc_time(struct rtc_time *tm);
-extern int  pmac_set_rtc_time(struct rtc_time *tm);
-extern void pmac_read_rtc_time(void);
-extern void pmac_calibrate_decr(void);
-
-extern void pmac_pcibios_fixup(void);
-extern void pmac_pci_init(void);
-extern void pmac_setup_pci_dma(void);
-extern void pmac_check_ht_link(void);
-
-extern void pmac_setup_smp(void);
-
-extern unsigned long pmac_ide_get_base(int index);
-extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
-	unsigned long data_port, unsigned long ctrl_port, int *irq);
-
-extern void pmac_nvram_init(void);
-
-#endif /* __PMAC_H__ */

arch/ppc64/kernel/pmac_smp.c

-/*
- * SMP support for power macintosh.
- *
- * We support both the old "powersurge" SMP architecture
- * and the current Core99 (G4 PowerMac) machines.
- *
- * Note that we don't support the very first rev. of
- * Apple/DayStar 2 CPUs board, the one with the funky
- * watchdog. Hopefully, none of these should be there except
- * maybe internally to Apple. I should probably still add some
- * code to detect this card though and disable SMP. --BenH.
- *
- * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
- * and Ben Herrenschmidt <benh@kernel.crashing.org>.
- *
- * Support for DayStar quad CPU cards
- * Copyright (C) XLR8, Inc. 1994-2000
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#undef DEBUG
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/time.h>
-#include <asm/cacheflush.h>
-#include <asm/keylargo.h>
-#include <asm/pmac_low_i2c.h>
-#include <asm/mpic.h>
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-extern void __secondary_start_pmac_0(void);
-
-extern struct smp_ops_t *smp_ops;
-
-static void (*pmac_tb_freeze)(int freeze);
-static struct device_node *pmac_tb_clock_chip_host;
-static u8 pmac_tb_pulsar_addr;
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase;
-
-static void smp_core99_cypress_tb_freeze(int freeze)
-{
-	u8 data;
-	int rc;
-
-	/* Strangely, the device-tree says address is 0xd2, but darwin
-	 * accesses 0xd0 ...
-	 */
-	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd0 | pmac_low_i2c_read,
-			       0x81, &data, 1);
-	if (rc != 0)
-		goto bail;
-
-	data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
-
-       	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd0 | pmac_low_i2c_write,
-			       0x81, &data, 1);
-
- bail:
-	if (rc != 0) {
-		printk("Cypress Timebase %s rc: %d\n",
-		       freeze ? "freeze" : "unfreeze", rc);
-		panic("Timebase freeze failed !\n");
-	}
-}
-
-static void smp_core99_pulsar_tb_freeze(int freeze)
-{
-	u8 data;
-	int rc;
-
-	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       pmac_tb_pulsar_addr | pmac_low_i2c_read,
-			       0x2e, &data, 1);
-	if (rc != 0)
-		goto bail;
-
-	data = (data & 0x88) | (freeze ? 0x11 : 0x22);
-
-	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       pmac_tb_pulsar_addr | pmac_low_i2c_write,
-			       0x2e, &data, 1);
- bail:
-	if (rc != 0) {
-		printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
-		       freeze ? "freeze" : "unfreeze", rc);
-		panic("Timebase freeze failed !\n");
-	}
-}
-
-
-static void smp_core99_give_timebase(void)
-{
-	/* Open i2c bus for synchronous access */
-	if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
-		panic("Can't open i2c for TB sync !\n");
-
-	spin_lock(&timebase_lock);
-	(*pmac_tb_freeze)(1);
-	mb();
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-
-	spin_lock(&timebase_lock);
-	(*pmac_tb_freeze)(0);
-	spin_unlock(&timebase_lock);
-
-	/* Close i2c bus */
-	pmac_low_i2c_close(pmac_tb_clock_chip_host);
-}
-
-
-static void __devinit smp_core99_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
-
-static int __init smp_core99_probe(void)
-{
-	struct device_node *cpus;	
-	struct device_node *cc;	
-	int ncpus = 0;
-
-	/* Maybe use systemconfiguration here ? */
-	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
-
-	/* Count CPUs in the device-tree */
-       	for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
-	       	++ncpus;
-
-	printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
-
-	/* Nothing more to do if less than 2 of them */
-	if (ncpus <= 1)
-		return 1;
-
-	/* HW sync only on these platforms */
-	if (!machine_is_compatible("PowerMac7,2") &&
-	    !machine_is_compatible("PowerMac7,3") &&
-	    !machine_is_compatible("RackMac3,1"))
-		goto nohwsync;
-
-	/* Look for the clock chip */
-	for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
-		struct device_node *p = of_get_parent(cc);
-		u32 *reg;
-		int ok;
-		ok = p && device_is_compatible(p, "uni-n-i2c");
-		if (!ok)
-			goto next;
-		reg = (u32 *)get_property(cc, "reg", NULL);
-		if (reg == NULL)
-			goto next;
-		switch (*reg) {
-		case 0xd2:
-			if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
-				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
-				pmac_tb_pulsar_addr = 0xd2;
-				printk(KERN_INFO "Timebase clock is Pulsar chip\n");
-			} else if (device_is_compatible(cc, "cy28508")) {
-				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
-				printk(KERN_INFO "Timebase clock is Cypress chip\n");
-			}
-			break;
-		case 0xd4:
-			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
-			pmac_tb_pulsar_addr = 0xd4;
-			printk(KERN_INFO "Timebase clock is Pulsar chip\n");
-			break;
-		}
-		if (pmac_tb_freeze != NULL) {
-			pmac_tb_clock_chip_host = p;
-			smp_ops->give_timebase = smp_core99_give_timebase;
-			smp_ops->take_timebase = smp_core99_take_timebase;
-			of_node_put(cc);
-			of_node_put(p);
-			break;
-		}
-	next:
-		of_node_put(p);
-	}
-
- nohwsync:
-	mpic_request_ipis();
-
-	return ncpus;
-}
-
-static void __init smp_core99_kick_cpu(int nr)
-{
-	unsigned int save_vector, j;
-	unsigned long new_vector;
-	unsigned long flags;
-	volatile unsigned int *vector
-		 = ((volatile unsigned int *)(KERNELBASE+0x100));
-
-	if (nr < 1 || nr > 3)
-		return;
-	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
-
-	local_irq_save(flags);
-	local_irq_disable();
-
-	/* Save reset vector */
-	save_vector = *vector;
-
-	/* Setup fake reset vector that does	
-	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
-	 */
-	new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
-	*vector = 0x48000002 + (new_vector - KERNELBASE);
-
-	/* flush data cache and inval instruction cache */
-	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
-
-	/* Put some life in our friend */
-	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
-	paca[nr].cpu_start = 1;
-
-	/* FIXME: We wait a bit for the CPU to take the exception, I should
-	 * instead wait for the entry code to set something for me. Well,
-	 * ideally, all that crap will be done in prom.c and the CPU left
-	 * in a RAM-based wait loop like CHRP.
-	 */
-	for (j = 1; j < 1000000; j++)
-		mb();
-
-	/* Restore our exception vector */
-	*vector = save_vector;
-	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
-
-	local_irq_restore(flags);
-	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
-}
-
-static void __init smp_core99_setup_cpu(int cpu_nr)
-{
-	/* Setup MPIC */
-	mpic_setup_this_cpu();
-
-	if (cpu_nr == 0) {
-		extern void g5_phy_disable_cpu1(void);
-
-		/* If we didn't start the second CPU, we must take
-		 * it off the bus
-		 */
-		if (num_online_cpus() < 2)		
-			g5_phy_disable_cpu1();
-		if (ppc_md.progress) ppc_md.progress("smp_core99_setup_cpu 0 done", 0x349);
-	}
-}
-
-struct smp_ops_t core99_smp_ops = {
-	.message_pass	= smp_mpic_message_pass,
-	.probe		= smp_core99_probe,
-	.kick_cpu	= smp_core99_kick_cpu,
-	.setup_cpu	= smp_core99_setup_cpu,
-	.give_timebase	= smp_generic_give_timebase,
-	.take_timebase	= smp_generic_take_timebase,
-};
-
-void __init pmac_setup_smp(void)
-{
-	smp_ops = &core99_smp_ops;
-#ifdef CONFIG_HOTPLUG_CPU
-	smp_ops->cpu_enable = generic_cpu_enable;
-	smp_ops->cpu_disable = generic_cpu_disable;
-	smp_ops->cpu_die = generic_cpu_die;
-#endif
-}

arch/ppc64/kernel/pmac_time.c

-/*
- * Support for periodic interrupts (100 per second) and for getting
- * the current time from the RTC on Power Macintoshes.
- *
- * We use the decrementer register for our periodic interrupts.
- *
- * Paul Mackerras	August 1996.
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
- *
- */
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/interrupt.h>
-#include <linux/rtc.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/nvram.h>
-#include <asm/smu.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* Apparently the RTC stores seconds since 1 Jan 1904 */
-#define RTC_OFFSET	2082844800
-
-/*
- * Calibrate the decrementer frequency with the VIA timer 1.
- */
-#define VIA_TIMER_FREQ_6	4700000	/* time 1 frequency * 6 */
-
-extern struct timezone sys_tz;
-extern void to_tm(int tim, struct rtc_time * tm);
-
-void pmac_get_rtc_time(struct rtc_time *tm)
-{
-	switch(sys_ctrler) {
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU: {
-		/* TODO: Move that to a function in the PMU driver */
-		struct adb_request req;
-		unsigned int now;
-
-		if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
-			return;
-		pmu_wait_complete(&req);
-		if (req.reply_len != 4)
-			printk(KERN_ERR "pmac_get_rtc_time: PMU returned a %d"
-			       " bytes reply\n", req.reply_len);
-		now = (req.reply[0] << 24) + (req.reply[1] << 16)
-			+ (req.reply[2] << 8) + req.reply[3];
-		DBG("get: %u -> %u\n", (int)now, (int)(now - RTC_OFFSET));
-		now -= RTC_OFFSET;
-
-		to_tm(now, tm);
-		tm->tm_year -= 1900;
-		tm->tm_mon -= 1;
-	
-		DBG("-> tm_mday: %d, tm_mon: %d, tm_year: %d, %d:%02d:%02d\n",
-		    tm->tm_mday, tm->tm_mon, tm->tm_year,
-		    tm->tm_hour, tm->tm_min, tm->tm_sec);
-		break;
-	}
-#endif /* CONFIG_ADB_PMU */
-
-#ifdef CONFIG_PMAC_SMU
-	case SYS_CTRLER_SMU:
-		smu_get_rtc_time(tm, 1);
-		break;
-#endif /* CONFIG_PMAC_SMU */
-	default:
-		;
-	}
-}
-
-int pmac_set_rtc_time(struct rtc_time *tm)
-{
-	switch(sys_ctrler) {
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU: {
-		/* TODO: Move that to a function in the PMU driver */
-		struct adb_request req;
-		unsigned int nowtime;
-
-		DBG("set: tm_mday: %d, tm_mon: %d, tm_year: %d,"
-		    " %d:%02d:%02d\n",
-		    tm->tm_mday, tm->tm_mon, tm->tm_year,
-		    tm->tm_hour, tm->tm_min, tm->tm_sec);
-
-		nowtime = mktime(tm->tm_year + 1900, tm->tm_mon + 1,
-				 tm->tm_mday, tm->tm_hour, tm->tm_min,
-				 tm->tm_sec);
-
-		DBG("-> %u -> %u\n", (int)nowtime,
-		    (int)(nowtime + RTC_OFFSET));
-		nowtime += RTC_OFFSET;
-
-		if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
-				nowtime >> 24, nowtime >> 16,
-				nowtime >> 8, nowtime) < 0)
-			return -ENXIO;
-		pmu_wait_complete(&req);
-		if (req.reply_len != 0)
-			printk(KERN_ERR "pmac_set_rtc_time: PMU returned a %d"
-			       " bytes reply\n", req.reply_len);
-		return 0;
-	}
-#endif /* CONFIG_ADB_PMU */
-
-#ifdef CONFIG_PMAC_SMU
-	case SYS_CTRLER_SMU:
-		return smu_set_rtc_time(tm, 1);
-#endif /* CONFIG_PMAC_SMU */
-	default:
-		return -ENODEV;
-	}
-}
-
-unsigned long __init pmac_get_boot_time(void)
-{
-	struct rtc_time tm;
-
-	pmac_get_rtc_time(&tm);
-	return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
-		      tm.tm_hour, tm.tm_min, tm.tm_sec);
-}
-
-/*
- * Query the OF and get the decr frequency.
- * FIXME: merge this with generic_calibrate_decr
- */
-void __init pmac_calibrate_decr(void)
-{
-	struct device_node *cpu;
-	unsigned int *fp;
-
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	cpu = find_type_devices("cpu");
-	if (cpu == 0)
-		panic("can't find cpu node in time_init");
-	fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
-	if (fp == 0)
-		panic("can't get cpu timebase frequency");
-	ppc_tb_freq = *fp;
-
-	fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL);
-	if (fp == 0)
-		panic("can't get cpu processor frequency");
-	ppc_proc_freq = *fp;
-}
-