Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  [JFFS2] print a message when marking bad block
  [JFFS2] Check for all-zero node headers
  [MTD] [OneNAND] Classify the page data and oob buffer
  [MTD] [OneNAND] Exit the loop when transferring/filling of the oob is finished
  [MTD] [OneNAND] add Nokia Copyright and a credit
  [MTD] [OneNAND] Fix typo & wrong comments
  [MTD] [OneNAND] Use oob buffer instead of main one in oob functions
  [MTD] Correct partition failed erase address
  [JFFS2] Use yield() between GC passes in background thread.
  [MTD] [NAND] Correct misspelled preprocessor variable.
  [MTD] [MAPS] dilnetpc: Fix printk warning
  [MTD] [NOR] Fix oops in cfi_amdstd_sync
  [MTD] ESB2 check for closed ROM window
  [JFFS2] Fix writebuffer recovery in the first page of a block
  [MTD] [NAND] make oobavail public

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -359,6 +359,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 		cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
 		cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
 		cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
+		cfi->chips[i].ref_point_counter = 0;
+		init_waitqueue_head(&(cfi->chips[i].wq));
 	}
 
 	map->fldrv = &cfi_amdstd_chipdrv;

drivers/mtd/chips/cfi_cmdset_0020.c

@@ -158,6 +158,8 @@ struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary)
 		cfi->chips[i].word_write_time = 128;
 		cfi->chips[i].buffer_write_time = 128;
 		cfi->chips[i].erase_time = 1024;
+		cfi->chips[i].ref_point_counter = 0;
+		init_waitqueue_head(&(cfi->chips[i].wq));
 	}
 
 	return cfi_staa_setup(map);

drivers/mtd/maps/dilnetpc.c

@@ -402,8 +402,8 @@ static int __init init_dnpc(void)
 			++higlvl_partition_info[i].name;
 	}
 
-	printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%lx\n",
-		is_dnp ? "DNPC" : "ADNP", dnpc_map.size, dnpc_map.phys);
+	printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%llx\n",
+		is_dnp ? "DNPC" : "ADNP", dnpc_map.size, (unsigned long long)dnpc_map.phys);
 
 	dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size);
 

drivers/mtd/maps/esb2rom.c

@@ -30,7 +30,7 @@
 
 #define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
 
-#define BIOS_CNTL	0xDC
+#define BIOS_CNTL		0xDC
 #define BIOS_LOCK_ENABLE	0x02
 #define BIOS_WRITE_ENABLE	0x01
 
@@ -145,7 +145,7 @@ static void esb2rom_cleanup(struct esb2rom_window *window)
 }
 
 static int __devinit esb2rom_init_one(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
+				      const struct pci_device_id *ent)
 {
 	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
 	struct esb2rom_window *window = &esb2rom_window;
@@ -185,7 +185,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 	/* Find a region continuous to the end of the ROM window  */
 	window->phys = 0;
 	pci_read_config_word(pdev, FWH_DEC_EN1, &word);
-	printk(KERN_DEBUG "pci_read_config_byte : %x\n", word);
+	printk(KERN_DEBUG "pci_read_config_word : %x\n", word);
 
 	if ((word & FWH_8MiB) == FWH_8MiB)
 		window->phys = 0xff400000;
@@ -212,6 +212,11 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 	else if ((word & FWH_0_5MiB) == FWH_0_5MiB)
 		window->phys = 0xfff80000;
 
+	if (window->phys == 0) {
+		printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
+		goto out;
+	}
+
 	/* reserved  0x0020 and 0x0010 */
 	window->phys -= 0x400000UL;
 	window->size = (0xffffffffUL - window->phys) + 1UL;

drivers/mtd/mtdconcat.c

@@ -727,6 +727,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd.erasesize = subdev[0]->erasesize;
 	concat->mtd.writesize = subdev[0]->writesize;
 	concat->mtd.oobsize = subdev[0]->oobsize;
+	concat->mtd.oobavail = subdev[0]->oobavail;
 	if (subdev[0]->writev)
 		concat->mtd.writev = concat_writev;
 	if (subdev[0]->read_oob)

drivers/mtd/mtdpart.c

@@ -200,6 +200,11 @@ static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
 		return -EINVAL;
 	instr->addr += part->offset;
 	ret = part->master->erase(part->master, instr);
+	if (ret) {
+		if (instr->fail_addr != 0xffffffff)
+			instr->fail_addr -= part->offset;
+		instr->addr -= part->offset;
+	}
 	return ret;
 }
 
@@ -338,6 +343,7 @@ int add_mtd_partitions(struct mtd_info *master,
 		slave->mtd.size = parts[i].size;
 		slave->mtd.writesize = master->writesize;
 		slave->mtd.oobsize = master->oobsize;
+		slave->mtd.oobavail = master->oobavail;
 		slave->mtd.subpage_sft = master->subpage_sft;
 
 		slave->mtd.name = parts[i].name;
@@ -559,4 +565,3 @@ EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
 MODULE_DESCRIPTION("Generic support for partitioning of MTD devices");
-

drivers/mtd/nand/diskonchip.c

@@ -114,7 +114,7 @@ module_param(no_autopart, int, 0);
 static int show_firmware_partition = 0;
 module_param(show_firmware_partition, int, 0);
 
-#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
+#ifdef CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE
 static int inftl_bbt_write = 1;
 #else
 static int inftl_bbt_write = 0;

drivers/mtd/nand/nand_base.c

@@ -2524,6 +2524,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
 		chip->ecc.layout->oobavail +=
 			chip->ecc.layout->oobfree[i].length;
+	mtd->oobavail = chip->ecc.layout->oobavail;
 
 	/*
 	 * Set the number of read / write steps for one page depending on ECC

drivers/mtd/onenand/onenand_base.c

@@ -4,6 +4,11 @@
  *  Copyright (C) 2005-2007 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
+ *  Credits:
+ *	Adrian Hunter <ext-adrian.hunter@nokia.com>:
+ *	auto-placement support, read-while load support, various fixes
+ *	Copyright (C) Nokia Corporation, 2007
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -831,7 +836,7 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
 	int readcol = column;
 	int readend = column + thislen;
 	int lastgap = 0;
-	uint8_t *oob_buf = this->page_buf + mtd->writesize;
+	uint8_t *oob_buf = this->oob_buf;
 
 	for (free = this->ecclayout->oobfree; free->length; ++free) {
 		if (readcol >= lastgap)
@@ -849,7 +854,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
 			int n = ed - st;
 			memcpy(buf, oob_buf + st, n);
 			buf += n;
-		}
+		} else
+			break;
 	}
 	return 0;
 }
@@ -947,9 +953,9 @@ static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 
 /**
  * onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob operation description structure
+ * @param mtd:		MTD device structure
+ * @param from:		offset to read from
+ * @param ops:		oob operation description structure
  */
 static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
@@ -1017,7 +1023,7 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
  * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
  * @param mtd		MTD device structure
  * @param from		offset to read from
- * @param @ops		oob operation description structure
+ * @param ops		oob operation description structure
  *
  * OneNAND read out-of-band data from the spare area for bbt scan
  */
@@ -1093,7 +1099,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
 {
 	struct onenand_chip *this = mtd->priv;
-	char *readp = this->page_buf + mtd->writesize;
+	char oobbuf[64];
 	int status, i;
 
 	this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
@@ -1102,9 +1108,9 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
 	if (status)
 		return status;
 
-	this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
-	for(i = 0; i < mtd->oobsize; i++)
-		if (buf[i] != 0xFF && buf[i] != readp[i])
+	this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+	for (i = 0; i < mtd->oobsize; i++)
+		if (buf[i] != 0xFF && buf[i] != oobbuf[i])
 			return -EBADMSG;
 
 	return 0;
@@ -1290,7 +1296,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
 			int n = ed - st;
 			memcpy(oob_buf + st, buf, n);
 			buf += n;
-		}
+		} else
+			break;
 	}
 	return 0;
 }
@@ -1312,6 +1319,7 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 	struct onenand_chip *this = mtd->priv;
 	int column, ret = 0, oobsize;
 	int written = 0;
+	u_char *oobbuf;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
 
@@ -1331,7 +1339,7 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 	}
 
 	/* For compatibility with NAND: Do not allow write past end of page */
-	if (column + len > oobsize) {
+	if (unlikely(column + len > oobsize)) {
 		printk(KERN_ERR "onenand_write_oob: "
 		      "Attempt to write past end of page\n");
 		return -EINVAL;
@@ -1348,6 +1356,8 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_WRITING);
 
+	oobbuf = this->oob_buf;
+
 	/* Loop until all data write */
 	while (written < len) {
 		int thislen = min_t(int, oobsize, len - written);
@@ -1358,12 +1368,12 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 
 		/* We send data to spare ram with oobsize
 		 * to prevent byte access */
-		memset(this->page_buf, 0xff, mtd->oobsize);
+		memset(oobbuf, 0xff, mtd->oobsize);
 		if (mode == MTD_OOB_AUTO)
-			onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+			onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
 		else
-			memcpy(this->page_buf + column, buf, thislen);
-		this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
+			memcpy(oobbuf + column, buf, thislen);
+		this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
 
 		this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
 
@@ -1375,7 +1385,7 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 			break;
 		}
 
-		ret = onenand_verify_oob(mtd, this->page_buf, to);
+		ret = onenand_verify_oob(mtd, oobbuf, to);
 		if (ret) {
 			printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
 			break;
@@ -1400,9 +1410,9 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 
 /**
  * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob operation description structure
+ * @param mtd:		MTD device structure
+ * @param to:		offset to write
+ * @param ops:		oob operation description structure
  */
 static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
@@ -1616,6 +1626,7 @@ static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
  * @param mtd		MTD device structure
  * @param ofs		offset relative to mtd start
  * @param len		number of bytes to lock or unlock
+ * @param cmd		lock or unlock command
  *
  * Lock or unlock one or more blocks
  */
@@ -2117,10 +2128,11 @@ static void onenand_check_features(struct mtd_info *mtd)
 }
 
 /**
- * onenand_print_device_info - Print device ID
+ * onenand_print_device_info - Print device & version ID
  * @param device        device ID
+ * @param version	version ID
  *
- * Print device ID
+ * Print device & version ID
  */
 static void onenand_print_device_info(int device, int version)
 {
@@ -2320,15 +2332,25 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 
 	/* Allocate buffers, if necessary */
 	if (!this->page_buf) {
-		size_t len;
-		len = mtd->writesize + mtd->oobsize;
-		this->page_buf = kmalloc(len, GFP_KERNEL);
+		this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
 		if (!this->page_buf) {
 			printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
 			return -ENOMEM;
 		}
 		this->options |= ONENAND_PAGEBUF_ALLOC;
 	}
+	if (!this->oob_buf) {
+		this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
+		if (!this->oob_buf) {
+			printk(KERN_ERR "onenand_scan(): Can't allocate oob_buf\n");
+			if (this->options & ONENAND_PAGEBUF_ALLOC) {
+				this->options &= ~ONENAND_PAGEBUF_ALLOC;
+				kfree(this->page_buf);
+			}
+			return -ENOMEM;
+		}
+		this->options |= ONENAND_OOBBUF_ALLOC;
+	}
 
 	this->state = FL_READY;
 	init_waitqueue_head(&this->wq);
@@ -2367,6 +2389,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	for (i = 0; this->ecclayout->oobfree[i].length; i++)
 		this->ecclayout->oobavail +=
 			this->ecclayout->oobfree[i].length;
+	mtd->oobavail = this->ecclayout->oobavail;
 
 	mtd->ecclayout = this->ecclayout;
 
@@ -2424,9 +2447,11 @@ void onenand_release(struct mtd_info *mtd)
 		kfree(bbm->bbt);
 		kfree(this->bbm);
 	}
-	/* Buffer allocated by onenand_scan */
+	/* Buffers allocated by onenand_scan */
 	if (this->options & ONENAND_PAGEBUF_ALLOC)
 		kfree(this->page_buf);
+	if (this->options & ONENAND_OOBBUF_ALLOC)
+		kfree(this->oob_buf);
 }
 
 EXPORT_SYMBOL_GPL(onenand_scan);

fs/jffs2/background.c

@@ -99,7 +99,13 @@ static int jffs2_garbage_collect_thread(void *_c)
 		if (try_to_freeze())
 			continue;
 
-		cond_resched();
+		/* This thread is purely an optimisation. But if it runs when
+		   other things could be running, it actually makes things a
+		   lot worse. Use yield() and put it at the back of the runqueue
+		   every time. Especially during boot, pulling an inode in
+		   with read_inode() is much preferable to having the GC thread
+		   get there first. */
+		yield();
 
 		/* Put_super will send a SIGKILL and then wait on the sem.
 		 */

fs/jffs2/readinode.c

@@ -373,7 +373,14 @@ free_out:
 static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref, struct jffs2_unknown_node *un)
 {
 	/* We don't mark unknown nodes as REF_UNCHECKED */
-	BUG_ON(ref_flags(ref) == REF_UNCHECKED);
+	if (ref_flags(ref) == REF_UNCHECKED) {
+		JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
+			    ref_offset(ref));
+		JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
+                            je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
+                            je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
+		return 1;
+	}
 
 	un->nodetype = cpu_to_je16(JFFS2_NODE_ACCURATE | je16_to_cpu(un->nodetype));
 
@@ -576,6 +583,13 @@ static int jffs2_get_inode_nodes(struct jffs2_sb_info *c, struct jffs2_inode_inf
 			jffs2_mark_node_obsolete(c, ref);
 			goto cont;
 		}
+		/* Due to poor choice of crc32 seed, an all-zero node will have a correct CRC */
+		if (!je32_to_cpu(node->u.hdr_crc) && !je16_to_cpu(node->u.nodetype) &&
+		    !je16_to_cpu(node->u.magic) && !je32_to_cpu(node->u.totlen)) {
+			JFFS2_NOTICE("All zero node header at %#08x.\n", ref_offset(ref));
+			jffs2_mark_node_obsolete(c, ref);
+			goto cont;
+		}
 
 		switch (je16_to_cpu(node->u.nodetype)) {
 

fs/jffs2/scan.c

@@ -734,6 +734,15 @@ scan_more:
 			ofs += 4;
 			continue;
 		}
+		/* Due to poor choice of crc32 seed, an all-zero node will have a correct CRC */
+		if (!je32_to_cpu(node->hdr_crc) && !je16_to_cpu(node->nodetype) &&
+		    !je16_to_cpu(node->magic) && !je32_to_cpu(node->totlen)) {
+			noisy_printk(&noise, "jffs2_scan_eraseblock(): All zero node header at 0x%08x.\n", ofs);
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
 
 		if (ofs + je32_to_cpu(node->totlen) >
 		    jeb->offset + c->sector_size) {

fs/jffs2/wbuf.c

@@ -238,7 +238,10 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
 	jeb = &c->blocks[c->wbuf_ofs / c->sector_size];
 
 	spin_lock(&c->erase_completion_lock);
-	jffs2_block_refile(c, jeb, REFILE_NOTEMPTY);
+	if (c->wbuf_ofs % c->mtd->erasesize)
+		jffs2_block_refile(c, jeb, REFILE_NOTEMPTY);
+	else
+		jffs2_block_refile(c, jeb, REFILE_ANYWAY);
 	spin_unlock(&c->erase_completion_lock);
 
 	BUG_ON(!ref_obsolete(jeb->last_node));
@@ -1087,7 +1090,7 @@ int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *
 	if (!c->mtd->block_markbad)
 		return 1; // What else can we do?
 
-	D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Marking bad block at %08x\n", bad_offset));
+	printk(KERN_WARNING "JFFS2: marking eraseblock at %08x\n as bad", bad_offset);
 	ret = c->mtd->block_markbad(c->mtd, bad_offset);
 
 	if (ret) {

include/linux/mtd/mtd.h

@@ -121,6 +121,7 @@ struct mtd_info {
 	u_int32_t writesize;
 
 	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	u_int32_t oobavail;  // Available OOB bytes per block
 
 	// Kernel-only stuff starts here.
 	char *name;

include/linux/mtd/onenand.h

@@ -82,7 +82,8 @@ struct onenand_bufferram {
  * @wq:			[INTERN] wait queue to sleep on if a OneNAND
  *			operation is in progress
  * @state:		[INTERN] the current state of the OneNAND device
- * @page_buf:		data buffer
+ * @page_buf:		[INTERN] page main data buffer
+ * @oob_buf:		[INTERN] page oob data buffer
  * @subpagesize:	[INTERN] holds the subpagesize
  * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
  * @bbm:		[REPLACEABLE] pointer to Bad Block Management
@@ -122,6 +123,7 @@ struct onenand_chip {
 	wait_queue_head_t	wq;
 	onenand_state_t		state;
 	unsigned char		*page_buf;
+	unsigned char		*oob_buf;
 
 	int			subpagesize;
 	struct nand_ecclayout	*ecclayout;
@@ -156,6 +158,7 @@ struct onenand_chip {
 #define ONENAND_HAS_CONT_LOCK		(0x0001)
 #define ONENAND_HAS_UNLOCK_ALL		(0x0002)
 #define ONENAND_PAGEBUF_ALLOC		(0x1000)
+#define ONENAND_OOBBUF_ALLOC		(0x2000)
 
 /*
  * OneNAND Flash Manufacturer ID Codes