ARM: OMAP: Remove old camera.h file

Remove old camera.h file

include/asm-arm/arch-omap/camera.h

-/*
- * OMAP-1510 camera interface
- *
- * FIXME: This will go to same directory with the camera driver
- */
-#define CAMERA_BASE		0xfffb6800
-#define CAM_CTRLCLOCK_REG	(CAMERA_BASE + 0x00)
-#define CAM_IT_STATUS_REG	(CAMERA_BASE + 0x04)
-#define CAM_MODE_REG		(CAMERA_BASE + 0x08)
-#define CAM_STATUS_REG		(CAMERA_BASE + 0x0C)
-#define CAM_CAMDATA_REG		(CAMERA_BASE + 0x10)
-#define CAM_GPIO_REG		(CAMERA_BASE + 0x14)
-#define CAM_PEAK_CTR_REG	(CAMERA_BASE + 0x18)
-
-#ifndef __ASSEMBLY__
-typedef struct {
-	__u32 ctrlclock;	/* 00 */
-	__u32 it_status;	/* 04 */
-	__u32 mode;		/* 08 */
-	__u32 status;		/* 0C */
-	__u32 camdata;		/* 10 */
-	__u32 gpio;		/* 14 */
-	__u32 peak_counter;	/* 18 */
-} camera_regs_t;
-#endif
-
-/* CTRLCLOCK bit shifts */
-#define FOSCMOD_BIT		0
-#define FOSCMOD_MASK		(0x7 << FOSCMOD_BIT)
-#define	  FOSCMOD_12MHz		0x0
-#define	  FOSCMOD_6MHz		0x2
-#define	  FOSCMOD_9_6MHz	0x4
-#define	  FOSCMOD_24MHz		0x5
-#define	  FOSCMOD_8MHz		0x6
-#define POLCLK			(1<<3)
-#define CAMEXCLK_EN		(1<<4)
-#define MCLK_EN			(1<<5)
-#define DPLL_EN			(1<<6)
-#define LCLK_EN			(1<<7)
-
-/* IT_STATUS bit shifts */
-#define V_UP			(1<<0)
-#define V_DOWN			(1<<1)
-#define H_UP			(1<<2)
-#define H_DOWN			(1<<3)
-#define FIFO_FULL		(1<<4)
-#define DATA_XFER		(1<<5)
-
-/* MODE bit shifts */
-#define CAMOSC			(1<<0)
-#define IMGSIZE_BIT		1
-#define IMGSIZE_MASK		(0x3 << IMGSIZE_BIT)
-#define	  IMGSIZE_CIF		(0x0 << IMGSIZE_BIT)	   /* 352x288 */
-#define	  IMGSIZE_QCIF		(0x1 << IMGSIZE_BIT)	   /* 176x144 */
-#define	  IMGSIZE_VGA		(0x2 << IMGSIZE_BIT)	   /* 640x480 */
-#define	  IMGSIZE_QVGA		(0x3 << IMGSIZE_BIT)	   /* 320x240 */
-#define ORDERCAMD		(1<<3)
-#define EN_V_UP			(1<<4)
-#define EN_V_DOWN		(1<<5)
-#define EN_H_UP			(1<<6)
-#define EN_H_DOWN		(1<<7)
-#define EN_DMA			(1<<8)
-#define THRESHOLD		(1<<9)
-#define THRESHOLD_BIT		9
-#define THRESHOLD_MASK		(0x7f<<9)
-#define EN_NIRQ			(1<<16)
-#define EN_FIFO_FULL		(1<<17)
-#define RAZ_FIFO		(1<<18)
-
-/* STATUS bit shifts */
-#define VSTATUS			(1<<0)
-#define HSTATUS			(1<<1)
-
-/* GPIO bit shifts */
-#define CAM_RST			(1<<0)