Commit 6958effe authored by Patrick Boettcher's avatar Patrick Boettcher Committed by Mauro Carvalho Chehab

V4L/DVB (4648): Hauppauge Nova-T 500 support added

This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T).
It adds correct AGC setting for the 3000P, correct firmware download state
detection.
Additionally it fixes the mt2060-driver to be able to be used with dvb_attach.
Signed-off-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent b7f54910
......@@ -32,13 +32,15 @@ extern int dvb_usb_dib0700_debug;
struct dib0700_state {
u8 channel_state;
u8 mt2060_if1[2];
u16 mt2060_if1[2];
};
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
extern struct i2c_algorithm dib0700_i2c_algo;
extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold);
extern int dib0700_device_count;
extern struct dvb_usb_device_properties dib0700_devices[];
......
......@@ -26,7 +26,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
USB_CTRL_GET_TIMEOUT);
if (status != txlen)
err("ep 0 write error (status = %d, len: %d)",status,txlen);
deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen);
return status < 0 ? status : 0;
}
......@@ -65,7 +65,7 @@ static int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u
USB_CTRL_GET_TIMEOUT);
if (status < 0)
err("ep 0 read error (status = %d)",status);
deb_info("ep 0 read error (status = %d)\n",status);
deb_data("<<< ");
debug_dump(rx,rxlen,deb_data);
......@@ -130,6 +130,19 @@ struct i2c_algorithm dib0700_i2c_algo = {
.functionality = dib0700_i2c_func,
};
int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold)
{
u8 buf[3] = { REQUEST_SET_GPIO, 4, (GPIO_IN << 7) | (0 << 6) }; // GPIO4 is save - used for I2C
*cold = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
buf[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, buf, 3, USB_CTRL_GET_TIMEOUT) != 3;
deb_info("cold: %d\n", *cold);
*cold = 0;
return 0;
}
static int dib0700_jumpram(struct usb_device *udev, u32 address)
{
int ret, actlen;
......@@ -182,8 +195,10 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
if (ret == 0) {
/* start the firmware */
if ((ret = dib0700_jumpram(udev,0x70000000)) == 0)
if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
info("firmware started successfully.");
msleep(100);
}
} else
ret = -EIO;
......
......@@ -25,24 +25,24 @@ static struct mt2060_config bristol_mt2060_config[2] = {
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
.setup = (0 << 15) | (0 << 14) | (1 << 13) | (1 << 12) | (29 << 0),
.setup = (0 << 15) | (0 << 14) | (0 << 13) | (0 << 12) | (29 << 0),
.agc1_max = 48497,
.agc1_min = 23593,
.agc2_max = 46531,
.agc2_min = 24904,
.agc1_max = 42598,
.agc1_min = 17694,
.agc2_max = 45875,
.agc2_min = 0,
.agc1_pt1 = 0x65,
.agc1_pt2 = 0x69,
.agc1_pt1 = 0,
.agc1_pt2 = 59,
.agc1_slope1 = 0x51,
.agc1_slope2 = 0x27,
.agc1_slope1 = 0,
.agc1_slope2 = 69,
.agc2_pt1 = 0,
.agc2_pt2 = 0x33,
.agc2_pt2 = 59,
.agc2_slope1 = 0x35,
.agc2_slope2 = 0x37,
.agc2_slope1 = 111,
.agc2_slope2 = 28,
};
static struct dib3000mc_config bristol_dib3000mc_config[2] = {
......@@ -60,25 +60,31 @@ static struct dib3000mc_config bristol_dib3000mc_config[2] = {
static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_state *st = adap->dev->priv;
if (adap->id == 0) {
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); msleep(10); // LNA
if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
return -ENODEV;
}
}
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, 10 + adap->id, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
st->mt2060_if1[adap->id] = 1220;
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
}
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_state *st = adap->dev->priv;
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
return mt2060_attach(adap->fe, tun_i2c, &bristol_mt2060_config[adap->id], st->mt2060_if1[adap->id]);
return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &bristol_mt2060_config[adap->id],
st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
}
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
......@@ -119,8 +125,10 @@ MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
.usb_ctrl = DEVICE_SPECIFIC, \
.firmware = "dvb-usb-dib0700-01.fw", \
.download_firmware = dib0700_download_firmware, \
.no_reconnect = 1, \
.size_of_priv = sizeof(struct dib0700_state), \
.i2c_algo = &dib0700_i2c_algo
.i2c_algo = &dib0700_i2c_algo, \
.identify_state = dib0700_identify_state
#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
.streaming_ctrl = dib0700_streaming_ctrl, \
......
......@@ -80,6 +80,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro
int ret;
const struct firmware *fw = NULL;
if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
err("did not find the firmware file. (%s) "
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
......
......@@ -94,8 +94,8 @@
#define USB_PID_WT220U_ZL0353_WARM 0x022b
#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x1234
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x1234
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
#define USB_PID_AVERMEDIA_VOLAR 0x1234
#define USB_PID_NEBULA_DIGITV 0x0201
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
......
......@@ -830,6 +830,7 @@ struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr
st->cfg = cfg;
st->i2c_adap = i2c_adap;
st->i2c_addr = i2c_addr;
demod = &st->demod;
demod->demodulator_priv = st;
......
......@@ -332,14 +332,14 @@ static const struct dvb_tuner_ops mt2060_tuner_ops = {
};
/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
{
struct mt2060_priv *priv = NULL;
u8 id = 0;
priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
return NULL;
priv->cfg = cfg;
priv->i2c = i2c;
......@@ -347,12 +347,12 @@ int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt206
if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
kfree(priv);
return -ENODEV;
return NULL;
}
if (id != PART_REV) {
kfree(priv);
return -ENODEV;
return NULL;
}
printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
......@@ -361,7 +361,7 @@ int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt206
mt2060_calibrate(priv);
return 0;
return fe;
}
EXPORT_SYMBOL(mt2060_attach);
......
......@@ -30,6 +30,6 @@ struct mt2060_config {
u8 clock_out; /* 0 = off, 1 = CLK/1, 2 = CLK/2, 3 = CLK/4 */
};
extern int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment