Commit 67be2dd1 authored by Martin Waitz's avatar Martin Waitz Committed by Linus Torvalds

[PATCH] DocBook: fix some descriptions

Some KernelDoc descriptions are updated to match the current code.
No code changes.
Signed-off-by: default avatarMartin Waitz <tali@admingilde.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 6013d544
......@@ -379,8 +379,8 @@ ACPI_DEVICE_ATTR(eject, 0200, NULL, acpi_eject_store);
/**
* setup_sys_fs_device_files - sets up the device files under device namespace
* @@dev: acpi_device object
* @@func: function pointer to create or destroy the device file
* @dev: acpi_device object
* @func: function pointer to create or destroy the device file
*/
static void
setup_sys_fs_device_files (
......
......@@ -115,7 +115,7 @@ int platform_add_devices(struct platform_device **devs, int num)
/**
* platform_device_register - add a platform-level device
* @dev: platform device we're adding
* @pdev: platform device we're adding
*
*/
int platform_device_register(struct platform_device * pdev)
......@@ -174,7 +174,7 @@ int platform_device_register(struct platform_device * pdev)
/**
* platform_device_unregister - remove a platform-level device
* @dev: platform device we're removing
* @pdev: platform device we're removing
*
* Note that this function will also release all memory- and port-based
* resources owned by the device (@dev->resource).
......
......@@ -120,6 +120,10 @@ static int pci_visit_bridge (struct pci_visit * fn,
/**
* pci_visit_dev - scans the pci buses.
* @fn: callback functions that are called while visiting
* @wrapped_dev: the device to scan
* @wrapped_parent: the bus where @wrapped_dev is connected to
*
* Every bus and every function is presented to a custom
* function that can act upon it.
*/
......
......@@ -14,7 +14,7 @@
/**
* pci_enable_rom - enable ROM decoding for a PCI device
* @dev: PCI device to enable
* @pdev: PCI device to enable
*
* Enable ROM decoding on @dev. This involves simply turning on the last
* bit of the PCI ROM BAR. Note that some cards may share address decoders
......@@ -32,7 +32,7 @@ static void pci_enable_rom(struct pci_dev *pdev)
/**
* pci_disable_rom - disable ROM decoding for a PCI device
* @dev: PCI device to disable
* @pdev: PCI device to disable
*
* Disable ROM decoding on a PCI device by turning off the last bit in the
* ROM BAR.
......@@ -47,7 +47,7 @@ static void pci_disable_rom(struct pci_dev *pdev)
/**
* pci_map_rom - map a PCI ROM to kernel space
* @dev: pointer to pci device struct
* @pdev: pointer to pci device struct
* @size: pointer to receive size of pci window over ROM
* @return: kernel virtual pointer to image of ROM
*
......@@ -132,7 +132,7 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
/**
* pci_map_rom_copy - map a PCI ROM to kernel space, create a copy
* @dev: pointer to pci device struct
* @pdev: pointer to pci device struct
* @size: pointer to receive size of pci window over ROM
* @return: kernel virtual pointer to image of ROM
*
......@@ -166,7 +166,7 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size)
/**
* pci_unmap_rom - unmap the ROM from kernel space
* @dev: pointer to pci device struct
* @pdev: pointer to pci device struct
* @rom: virtual address of the previous mapping
*
* Remove a mapping of a previously mapped ROM
......@@ -187,7 +187,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
/**
* pci_remove_rom - disable the ROM and remove its sysfs attribute
* @dev: pointer to pci device struct
* @pdev: pointer to pci device struct
*
* Remove the rom file in sysfs and disable ROM decoding.
*/
......@@ -206,7 +206,7 @@ void pci_remove_rom(struct pci_dev *pdev)
/**
* pci_cleanup_rom - internal routine for freeing the ROM copy created
* by pci_map_rom_copy called from remove.c
* @dev: pointer to pci device struct
* @pdev: pointer to pci device struct
*
* Free the copied ROM if we allocated one.
*/
......
......@@ -253,7 +253,7 @@ void pnp_init_resource_table(struct pnp_resource_table *table)
/**
* pnp_clean_resources - clears resources that were not manually set
* @res - the resources to clean
* @res: the resources to clean
*
*/
static void pnp_clean_resource_table(struct pnp_resource_table * res)
......
......@@ -140,6 +140,7 @@ inline void bio_init(struct bio *bio)
* bio_alloc_bioset - allocate a bio for I/O
* @gfp_mask: the GFP_ mask given to the slab allocator
* @nr_iovecs: number of iovecs to pre-allocate
* @bs: the bio_set to allocate from
*
* Description:
* bio_alloc_bioset will first try it's on mempool to satisfy the allocation.
......@@ -629,6 +630,7 @@ out:
/**
* bio_map_user - map user address into bio
* @q: the request_queue_t for the bio
* @bdev: destination block device
* @uaddr: start of user address
* @len: length in bytes
......
......@@ -774,15 +774,14 @@ repeat:
/**
* sync_mapping_buffers - write out and wait upon a mapping's "associated"
* buffers
* @buffer_mapping - the mapping which backs the buffers' data
* @mapping - the mapping which wants those buffers written
* @mapping: the mapping which wants those buffers written
*
* Starts I/O against the buffers at mapping->private_list, and waits upon
* that I/O.
*
* Basically, this is a convenience function for fsync(). @buffer_mapping is
* the blockdev which "owns" the buffers and @mapping is a file or directory
* which needs those buffers to be written for a successful fsync().
* Basically, this is a convenience function for fsync().
* @mapping is a file or directory which needs those buffers to be written for
* a successful fsync().
*/
int sync_mapping_buffers(struct address_space *mapping)
{
......@@ -1263,6 +1262,7 @@ __getblk_slow(struct block_device *bdev, sector_t block, int size)
/**
* mark_buffer_dirty - mark a buffer_head as needing writeout
* @bh: the buffer_head to mark dirty
*
* mark_buffer_dirty() will set the dirty bit against the buffer, then set its
* backing page dirty, then tag the page as dirty in its address_space's radix
......@@ -1501,6 +1501,7 @@ EXPORT_SYMBOL(__breadahead);
/**
* __bread() - reads a specified block and returns the bh
* @bdev: the block_device to read from
* @block: number of block
* @size: size (in bytes) to read
*
......
......@@ -512,7 +512,8 @@ restart:
}
/**
* sync_inodes
* sync_inodes - writes all inodes to disk
* @wait: wait for completion
*
* sync_inodes() goes through each super block's dirty inode list, writes the
* inodes out, waits on the writeout and puts the inodes back on the normal
......@@ -604,6 +605,7 @@ EXPORT_SYMBOL(sync_inode);
/**
* generic_osync_inode - flush all dirty data for a given inode to disk
* @inode: inode to write
* @mapping: the address_space that should be flushed
* @what: what to write and wait upon
*
* This can be called by file_write functions for files which have the
......
......@@ -160,52 +160,6 @@ map_buffer_to_page(struct page *page, struct buffer_head *bh, int page_block)
} while (page_bh != head);
}
/**
* mpage_readpages - populate an address space with some pages, and
* start reads against them.
*
* @mapping: the address_space
* @pages: The address of a list_head which contains the target pages. These
* pages have their ->index populated and are otherwise uninitialised.
*
* The page at @pages->prev has the lowest file offset, and reads should be
* issued in @pages->prev to @pages->next order.
*
* @nr_pages: The number of pages at *@pages
* @get_block: The filesystem's block mapper function.
*
* This function walks the pages and the blocks within each page, building and
* emitting large BIOs.
*
* If anything unusual happens, such as:
*
* - encountering a page which has buffers
* - encountering a page which has a non-hole after a hole
* - encountering a page with non-contiguous blocks
*
* then this code just gives up and calls the buffer_head-based read function.
* It does handle a page which has holes at the end - that is a common case:
* the end-of-file on blocksize < PAGE_CACHE_SIZE setups.
*
* BH_Boundary explanation:
*
* There is a problem. The mpage read code assembles several pages, gets all
* their disk mappings, and then submits them all. That's fine, but obtaining
* the disk mappings may require I/O. Reads of indirect blocks, for example.
*
* So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
* submitted in the following order:
* 12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
* because the indirect block has to be read to get the mappings of blocks
* 13,14,15,16. Obviously, this impacts performance.
*
* So what we do it to allow the filesystem's get_block() function to set
* BH_Boundary when it maps block 11. BH_Boundary says: mapping of the block
* after this one will require I/O against a block which is probably close to
* this one. So you should push what I/O you have currently accumulated.
*
* This all causes the disk requests to be issued in the correct order.
*/
static struct bio *
do_mpage_readpage(struct bio *bio, struct page *page, unsigned nr_pages,
sector_t *last_block_in_bio, get_block_t get_block)
......@@ -320,6 +274,52 @@ confused:
goto out;
}
/**
* mpage_readpages - populate an address space with some pages, and
* start reads against them.
*
* @mapping: the address_space
* @pages: The address of a list_head which contains the target pages. These
* pages have their ->index populated and are otherwise uninitialised.
*
* The page at @pages->prev has the lowest file offset, and reads should be
* issued in @pages->prev to @pages->next order.
*
* @nr_pages: The number of pages at *@pages
* @get_block: The filesystem's block mapper function.
*
* This function walks the pages and the blocks within each page, building and
* emitting large BIOs.
*
* If anything unusual happens, such as:
*
* - encountering a page which has buffers
* - encountering a page which has a non-hole after a hole
* - encountering a page with non-contiguous blocks
*
* then this code just gives up and calls the buffer_head-based read function.
* It does handle a page which has holes at the end - that is a common case:
* the end-of-file on blocksize < PAGE_CACHE_SIZE setups.
*
* BH_Boundary explanation:
*
* There is a problem. The mpage read code assembles several pages, gets all
* their disk mappings, and then submits them all. That's fine, but obtaining
* the disk mappings may require I/O. Reads of indirect blocks, for example.
*
* So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
* submitted in the following order:
* 12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
* because the indirect block has to be read to get the mappings of blocks
* 13,14,15,16. Obviously, this impacts performance.
*
* So what we do it to allow the filesystem's get_block() function to set
* BH_Boundary when it maps block 11. BH_Boundary says: mapping of the block
* after this one will require I/O against a block which is probably close to
* this one. So you should push what I/O you have currently accumulated.
*
* This all causes the disk requests to be issued in the correct order.
*/
int
mpage_readpages(struct address_space *mapping, struct list_head *pages,
unsigned nr_pages, get_block_t get_block)
......
......@@ -1742,7 +1742,7 @@ struct dentry *proc_pid_unhash(struct task_struct *p)
/**
* proc_pid_flush - recover memory used by stale /proc/@pid/x entries
* @proc_entry: directoy to prune.
* @proc_dentry: directoy to prune.
*
* Shrink the /proc directory that was used by the just killed thread.
*/
......
......@@ -51,7 +51,10 @@ EXPORT_SYMBOL(seq_open);
/**
* seq_read - ->read() method for sequential files.
* @file, @buf, @size, @ppos: see file_operations method
* @file: the file to read from
* @buf: the buffer to read to
* @size: the maximum number of bytes to read
* @ppos: the current position in the file
*
* Ready-made ->f_op->read()
*/
......@@ -219,7 +222,9 @@ Eoverflow:
/**
* seq_lseek - ->llseek() method for sequential files.
* @file, @offset, @origin: see file_operations method
* @file: the file in question
* @offset: new position
* @origin: 0 for absolute, 1 for relative position
*
* Ready-made ->f_op->llseek()
*/
......
......@@ -96,7 +96,7 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer
/**
* flush_read_buffer - push buffer to userspace.
* @buffer: data buffer for file.
* @userbuf: user-passed buffer.
* @buf: user-passed buffer.
* @count: number of bytes requested.
* @ppos: file position.
*
......@@ -164,7 +164,7 @@ out:
/**
* fill_write_buffer - copy buffer from userspace.
* @buffer: data buffer for file.
* @userbuf: data from user.
* @buf: data from user.
* @count: number of bytes in @userbuf.
*
* Allocate @buffer->page if it hasn't been already, then
......
......@@ -1065,71 +1065,75 @@ int sync_inode(struct inode *inode, struct writeback_control *wbc);
* with a particular exported file system - particularly enabling nfsd and
* the filesystem to co-operate when dealing with file handles.
*
* export_operations contains two basic operation for dealing with file handles,
* decode_fh() and encode_fh(), and allows for some other operations to be defined
* which standard helper routines use to get specific information from the
* filesystem.
* export_operations contains two basic operation for dealing with file
* handles, decode_fh() and encode_fh(), and allows for some other
* operations to be defined which standard helper routines use to get
* specific information from the filesystem.
*
* nfsd encodes information use to determine which filesystem a filehandle
* applies to in the initial part of the file handle. The remainder, termed a
* file handle fragment, is controlled completely by the filesystem.
* The standard helper routines assume that this fragment will contain one or two
* sub-fragments, one which identifies the file, and one which may be used to
* identify the (a) directory containing the file.
* applies to in the initial part of the file handle. The remainder, termed
* a file handle fragment, is controlled completely by the filesystem. The
* standard helper routines assume that this fragment will contain one or
* two sub-fragments, one which identifies the file, and one which may be
* used to identify the (a) directory containing the file.
*
* In some situations, nfsd needs to get a dentry which is connected into a
* specific part of the file tree. To allow for this, it passes the function
* acceptable() together with a @context which can be used to see if the dentry
* is acceptable. As there can be multiple dentrys for a given file, the filesystem
* should check each one for acceptability before looking for the next. As soon
* as an acceptable one is found, it should be returned.
* specific part of the file tree. To allow for this, it passes the
* function acceptable() together with a @context which can be used to see
* if the dentry is acceptable. As there can be multiple dentrys for a
* given file, the filesystem should check each one for acceptability before
* looking for the next. As soon as an acceptable one is found, it should
* be returned.
*
* decode_fh:
* @decode_fh is given a &struct super_block (@sb), a file handle fragment (@fh, @fh_len)
* and an acceptability testing function (@acceptable, @context). It should return
* a &struct dentry which refers to the same file that the file handle fragment refers
* to, and which passes the acceptability test. If it cannot, it should return
* a %NULL pointer if the file was found but no acceptable &dentries were available, or
* a %ERR_PTR error code indicating why it couldn't be found (e.g. %ENOENT or %ENOMEM).
* @decode_fh is given a &struct super_block (@sb), a file handle fragment
* (@fh, @fh_len) and an acceptability testing function (@acceptable,
* @context). It should return a &struct dentry which refers to the same
* file that the file handle fragment refers to, and which passes the
* acceptability test. If it cannot, it should return a %NULL pointer if
* the file was found but no acceptable &dentries were available, or a
* %ERR_PTR error code indicating why it couldn't be found (e.g. %ENOENT or
* %ENOMEM).
*
* encode_fh:
* @encode_fh should store in the file handle fragment @fh (using at most @max_len bytes)
* information that can be used by @decode_fh to recover the file refered to by the
* &struct dentry @de. If the @connectable flag is set, the encode_fh() should store
* sufficient information so that a good attempt can be made to find not only
* the file but also it's place in the filesystem. This typically means storing
* a reference to de->d_parent in the filehandle fragment.
* encode_fh() should return the number of bytes stored or a negative error code
* such as %-ENOSPC
* @encode_fh should store in the file handle fragment @fh (using at most
* @max_len bytes) information that can be used by @decode_fh to recover the
* file refered to by the &struct dentry @de. If the @connectable flag is
* set, the encode_fh() should store sufficient information so that a good
* attempt can be made to find not only the file but also it's place in the
* filesystem. This typically means storing a reference to de->d_parent in
* the filehandle fragment. encode_fh() should return the number of bytes
* stored or a negative error code such as %-ENOSPC
*
* get_name:
* @get_name should find a name for the given @child in the given @parent directory.
* The name should be stored in the @name (with the understanding that it is already
* pointing to a a %NAME_MAX+1 sized buffer. get_name() should return %0 on success,
* a negative error code or error.
* @get_name will be called without @parent->i_sem held.
* @get_name should find a name for the given @child in the given @parent
* directory. The name should be stored in the @name (with the
* understanding that it is already pointing to a a %NAME_MAX+1 sized
* buffer. get_name() should return %0 on success, a negative error code
* or error. @get_name will be called without @parent->i_sem held.
*
* get_parent:
* @get_parent should find the parent directory for the given @child which is also
* a directory. In the event that it cannot be found, or storage space cannot be
* allocated, a %ERR_PTR should be returned.
* @get_parent should find the parent directory for the given @child which
* is also a directory. In the event that it cannot be found, or storage
* space cannot be allocated, a %ERR_PTR should be returned.
*
* get_dentry:
* Given a &super_block (@sb) and a pointer to a file-system specific inode identifier,
* possibly an inode number, (@inump) get_dentry() should find the identified inode and
* return a dentry for that inode.
* Any suitable dentry can be returned including, if necessary, a new dentry created
* with d_alloc_root. The caller can then find any other extant dentrys by following the
* d_alias links. If a new dentry was created using d_alloc_root, DCACHE_NFSD_DISCONNECTED
* should be set, and the dentry should be d_rehash()ed.
* Given a &super_block (@sb) and a pointer to a file-system specific inode
* identifier, possibly an inode number, (@inump) get_dentry() should find
* the identified inode and return a dentry for that inode. Any suitable
* dentry can be returned including, if necessary, a new dentry created with
* d_alloc_root. The caller can then find any other extant dentrys by
* following the d_alias links. If a new dentry was created using
* d_alloc_root, DCACHE_NFSD_DISCONNECTED should be set, and the dentry
* should be d_rehash()ed.
*
* If the inode cannot be found, either a %NULL pointer or an %ERR_PTR code can be returned.
* The @inump will be whatever was passed to nfsd_find_fh_dentry() in either the
* @obj or @parent parameters.
* If the inode cannot be found, either a %NULL pointer or an %ERR_PTR code
* can be returned. The @inump will be whatever was passed to
* nfsd_find_fh_dentry() in either the @obj or @parent parameters.
*
* Locking rules:
* get_parent is called with child->d_inode->i_sem down
* get_name is not (which is possibly inconsistent)
* get_parent is called with child->d_inode->i_sem down
* get_name is not (which is possibly inconsistent)
*/
struct export_operations {
......
......@@ -167,13 +167,14 @@ struct skb_shared_info {
* @h: Transport layer header
* @nh: Network layer header
* @mac: Link layer header
* @dst: FIXME: Describe this field
* @dst: destination entry
* @sp: the security path, used for xfrm
* @cb: Control buffer. Free for use by every layer. Put private vars here
* @len: Length of actual data
* @data_len: Data length
* @mac_len: Length of link layer header
* @csum: Checksum
* @__unused: Dead field, may be reused
* @local_df: allow local fragmentation
* @cloned: Head may be cloned (check refcnt to be sure)
* @nohdr: Payload reference only, must not modify header
* @pkt_type: Packet class
......
......@@ -161,6 +161,7 @@ struct sock_common {
* @sk_sndmsg_page: cached page for sendmsg
* @sk_sndmsg_off: cached offset for sendmsg
* @sk_send_head: front of stuff to transmit
* @sk_security: used by security modules
* @sk_write_pending: a write to stream socket waits to start
* @sk_state_change: callback to indicate change in the state of the sock
* @sk_data_ready: callback to indicate there is data to be processed
......
......@@ -2906,6 +2906,7 @@ static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
* @q: the waitqueue
* @mode: which threads
* @nr_exclusive: how many wake-one or wake-many threads to wake up
* @key: is directly passed to the wakeup function
*/
void fastcall __wake_up(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
......@@ -2928,7 +2929,7 @@ void fastcall __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
}
/**
* __wake_up - sync- wake up threads blocked on a waitqueue.
* __wake_up_sync - wake up threads blocked on a waitqueue.
* @q: the waitqueue
* @mode: which threads
* @nr_exclusive: how many wake-one or wake-many threads to wake up
......
......@@ -1991,6 +1991,8 @@ int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp,
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
* @ppos: the current position in the file
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
......
......@@ -216,13 +216,12 @@ int kobject_register(struct kobject * kobj)
/**
* kobject_set_name - Set the name of an object
* @kobj: object.
* @name: name.
* @fmt: format string used to build the name
*
* If strlen(name) >= KOBJ_NAME_LEN, then use a dynamically allocated
* string that @kobj->k_name points to. Otherwise, use the static
* @kobj->name array.
*/
int kobject_set_name(struct kobject * kobj, const char * fmt, ...)
{
int error = 0;
......
......@@ -169,9 +169,10 @@ static int sync_page(void *word)
/**
* filemap_fdatawrite_range - start writeback against all of a mapping's
* dirty pages that lie within the byte offsets <start, end>
* @mapping: address space structure to write
* @start: offset in bytes where the range starts
* @end : offset in bytes where the range ends
* @mapping: address space structure to write
* @start: offset in bytes where the range starts
* @end: offset in bytes where the range ends
* @sync_mode: enable synchronous operation
*
* If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
* opposed to a regular memory * cleansing writeback. The difference between
......@@ -535,8 +536,8 @@ EXPORT_SYMBOL(find_trylock_page);
/**
* find_lock_page - locate, pin and lock a pagecache page
*
* @mapping - the address_space to search
* @offset - the page index
* @mapping: the address_space to search
* @offset: the page index
*
* Locates the desired pagecache page, locks it, increments its reference
* count and returns its address.
......@@ -575,9 +576,9 @@ EXPORT_SYMBOL(find_lock_page);
/**
* find_or_create_page - locate or add a pagecache page
*
* @mapping - the page's address_space
* @index - the page's index into the mapping
* @gfp_mask - page allocation mode
* @mapping: the page's address_space
* @index: the page's index into the mapping
* @gfp_mask: page allocation mode
*
* Locates a page in the pagecache. If the page is not present, a new page
* is allocated using @gfp_mask and is added to the pagecache and to the VM's
......
......@@ -255,7 +255,7 @@ static void balance_dirty_pages(struct address_space *mapping)
/**
* balance_dirty_pages_ratelimited - balance dirty memory state
* @mapping - address_space which was dirtied
* @mapping: address_space which was dirtied
*
* Processes which are dirtying memory should call in here once for each page
* which was newly dirtied. The function will periodically check the system's
......@@ -562,8 +562,8 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
/**
* write_one_page - write out a single page and optionally wait on I/O
*
* @page - the page to write
* @wait - if true, wait on writeout
* @page: the page to write
* @wait: if true, wait on writeout
*
* The page must be locked by the caller and will be unlocked upon return.
*
......
......@@ -242,7 +242,7 @@ EXPORT_SYMBOL(invalidate_inode_pages);
/**
* invalidate_inode_pages2_range - remove range of pages from an address_space
* @mapping - the address_space
* @mapping: the address_space
* @start: the page offset 'from' which to invalidate
* @end: the page offset 'to' which to invalidate (inclusive)
*
......@@ -322,7 +322,7 @@ EXPORT_SYMBOL_GPL(invalidate_inode_pages2_range);
/**
* invalidate_inode_pages2 - remove all pages from an address_space
* @mapping - the address_space
* @mapping: the address_space
*
* Any pages which are found to be mapped into pagetables are unmapped prior to
* invalidation.
......
......@@ -203,7 +203,7 @@ void skb_free_datagram(struct sock *sk, struct sk_buff *skb)
* skb_copy_datagram_iovec - Copy a datagram to an iovec.
* @skb: buffer to copy
* @offset: offset in the buffer to start copying from
* @iovec: io vector to copy to
* @to: io vector to copy to
* @len: amount of data to copy from buffer to iovec
*
* Note: the iovec is modified during the copy.
......@@ -379,7 +379,7 @@ fault:
* skb_copy_and_csum_datagram_iovec - Copy and checkum skb to user iovec.
* @skb: skbuff
* @hlen: hardware length
* @iovec: io vector
* @iov: io vector
*
* Caller _must_ check that skb will fit to this iovec.
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment