Commit 61d48c2c authored by Martin Schwidefsky's avatar Martin Schwidefsky

[S390] Kconfig: use common Kconfig files for s390.

Disband drivers/s390/Kconfig, use the common Kconfig files. The s390
specific config options from drivers/s390/Kconfig are moved to the
respective common Kconfig files.
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
parent abf3ea1b
......@@ -4,27 +4,23 @@
#
config MMU
bool
default y
def_bool y
config ZONE_DMA
def_bool y
depends on 64BIT
config LOCKDEP_SUPPORT
bool
default y
def_bool y
config STACKTRACE_SUPPORT
bool
default y
def_bool y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
bool
default y
def_bool y
config ARCH_HAS_ILOG2_U32
bool
......@@ -35,8 +31,7 @@ config ARCH_HAS_ILOG2_U64
default n
config GENERIC_HWEIGHT
bool
default y
def_bool y
config GENERIC_TIME
def_bool y
......@@ -55,8 +50,7 @@ config NO_DMA
mainmenu "Linux Kernel Configuration"
config S390
bool
default y
def_bool y
source "init/Kconfig"
......@@ -280,6 +274,10 @@ config WARN_STACK_SIZE
config ARCH_POPULATES_NODE_MAP
def_bool y
comment "Kernel preemption"
source "kernel/Kconfig.preempt"
source "mm/Kconfig"
config HOLES_IN_ZONE
......@@ -320,17 +318,6 @@ config QDIO_DEBUG
comment "Misc"
config PREEMPT
bool "Preemptible Kernel"
help
This option reduces the latency of the kernel when reacting to
real-time or interactive events by allowing a low priority process to
be preempted even if it is in kernel mode executing a system call.
This allows applications to run more reliably even when the system is
under load.
Say N if you are unsure.
config IPL
bool "Builtin IPL record support"
help
......@@ -488,6 +475,8 @@ config APPLDATA_NET_SUM
This can also be compiled as a module, which will be called
appldata_net_sum.o.
source kernel/Kconfig.hz
config NO_IDLE_HZ
bool "No HZ timer ticks in idle"
help
......@@ -535,18 +524,12 @@ endmenu
source "net/Kconfig"
config PCMCIA
bool
default n
source "drivers/base/Kconfig"
def_bool n
source "drivers/connector/Kconfig"
source "drivers/scsi/Kconfig"
source "drivers/s390/Kconfig"
config CCW
def_bool y
source "drivers/net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
......
......@@ -444,8 +444,6 @@ config CDROM_PKTCDVD_WCACHE
this option is dangerous unless the CD-RW media is known good, as we
don't do deferred write error handling yet.
source "drivers/s390/block/Kconfig"
config ATA_OVER_ETH
tristate "ATA over Ethernet support"
depends on NET
......@@ -453,6 +451,8 @@ config ATA_OVER_ETH
This driver provides Support for ATA over Ethernet block
devices like the Coraid EtherDrive (R) Storage Blade.
source "drivers/s390/block/Kconfig"
endmenu
endif
......@@ -1081,5 +1081,7 @@ config DEVPORT
depends on ISA || PCI
default y
source "drivers/s390/char/Kconfig"
endmenu
......@@ -56,4 +56,26 @@ config CRYPTO_DEV_GEODE
To compile this driver as a module, choose M here: the module
will be called geode-aes.
config ZCRYPT
tristate "Support for PCI-attached cryptographic adapters"
depends on S390
select ZCRYPT_MONOLITHIC if ZCRYPT="y"
default "m"
help
Select this option if you want to use a PCI-attached cryptographic
adapter like:
+ PCI Cryptographic Accelerator (PCICA)
+ PCI Cryptographic Coprocessor (PCICC)
+ PCI-X Cryptographic Coprocessor (PCIXCC)
+ Crypto Express2 Coprocessor (CEX2C)
+ Crypto Express2 Accelerator (CEX2A)
config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module"
depends on ZCRYPT="m"
help
Select this option if you want to have a single module z90crypt.ko
that contains all parts of the crypto device driver (ap bus,
request router and all the card drivers).
endmenu
if S390 && BLOCK
comment "S/390 block device drivers"
depends on S390
depends on S390 && BLOCK
config BLK_DEV_XPRAM
tristate "XPRAM disk support"
depends on S390
depends on S390 && BLOCK
help
Select this option if you want to use your expanded storage on S/390
or zSeries as a disk. This is useful as a _fast_ swap device if you
......@@ -15,12 +13,13 @@ config BLK_DEV_XPRAM
config DCSSBLK
tristate "DCSSBLK support"
depends on S390 && BLOCK
help
Support for dcss block device
config DASD
tristate "Support for DASD devices"
depends on CCW
depends on CCW && BLOCK
help
Enable this option if you want to access DASDs directly utilizing
S/390s channel subsystem commands. This is necessary for running
......@@ -62,5 +61,3 @@ config DASD_EER
This driver provides a character device interface to the
DASD extended error reporting. This is only needed if you want to
use applications written for the EER facility.
endif
config CCW
bool
default y
source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
menu "Character device drivers"
config UNIX98_PTYS
bool "Unix98 PTY support"
---help---
A pseudo terminal (PTY) is a software device consisting of two
halves: a master and a slave. The slave device behaves identical to
a physical terminal; the master device is used by a process to
read data from and write data to the slave, thereby emulating a
terminal. Typical programs for the master side are telnet servers
and xterms.
Linux has traditionally used the BSD-like names /dev/ptyxx for
masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
has a number of problems. The GNU C library glibc 2.1 and later,
however, supports the Unix98 naming standard: in order to acquire a
pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
terminal is then made available to the process and the pseudo
terminal slave can be accessed as /dev/pts/<number>. What was
traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
The entries in /dev/pts/ are created on the fly by a virtual
file system; therefore, if you say Y here you should say Y to
"/dev/pts file system for Unix98 PTYs" as well.
If you want to say Y here, you need to have the C library glibc 2.1
or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
Read the instructions in <file:Documentation/Changes> pertaining to
pseudo terminals. It's safe to say N.
config UNIX98_PTY_COUNT
int "Maximum number of Unix98 PTYs in use (0-2048)"
depends on UNIX98_PTYS
default "256"
help
The maximum number of Unix98 PTYs that can be used at any one time.
The default is 256, and should be enough for desktop systems. Server
machines which support incoming telnet/rlogin/ssh connections and/or
serve several X terminals may want to increase this: every incoming
connection and every xterm uses up one PTY.
When not in use, each additional set of 256 PTYs occupy
approximately 8 KB of kernel memory on 32-bit architectures.
config HANGCHECK_TIMER
tristate "Hangcheck timer"
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
or merely print a warning.
source "drivers/char/watchdog/Kconfig"
comment "S/390 character device drivers"
depends on S390
config TN3270
tristate "Support for locally attached 3270 terminals"
depends on CCW
help
Include support for IBM 3270 terminals.
......@@ -88,6 +28,7 @@ config TN3270_CONSOLE
config TN3215
bool "Support for 3215 line mode terminal"
depends on CCW
help
Include support for IBM 3215 line-mode terminals.
......@@ -99,12 +40,19 @@ config TN3215_CONSOLE
Linux system console.
config CCW_CONSOLE
bool
depends on TN3215_CONSOLE || TN3270_CONSOLE
default y
bool
depends on TN3215_CONSOLE || TN3270_CONSOLE
default y
config SCLP
bool "Support for SCLP"
depends on S390
help
Include support for the SCLP interface to the service element.
config SCLP_TTY
bool "Support for SCLP line mode terminal"
depends on SCLP
help
Include support for IBM SCLP line-mode terminals.
......@@ -117,6 +65,7 @@ config SCLP_CONSOLE
config SCLP_VT220_TTY
bool "Support for SCLP VT220-compatible terminal"
depends on SCLP
help
Include support for an IBM SCLP VT220-compatible terminal.
......@@ -129,6 +78,7 @@ config SCLP_VT220_CONSOLE
config SCLP_CPI
tristate "Control-Program Identification"
depends on SCLP
help
This option enables the hardware console interface for system
identification. This is commonly used for workload management and
......@@ -140,6 +90,7 @@ config SCLP_CPI
config S390_TAPE
tristate "S/390 tape device support"
depends on CCW
help
Select this option if you want to access channel-attached tape
devices on IBM S/390 or zSeries.
......@@ -194,6 +145,7 @@ config VMLOGRDR
config VMCP
tristate "Support for the z/VM CP interface (VM only)"
depends on S390
help
Select this option if you want to be able to interact with the control
program on z/VM
......@@ -207,33 +159,8 @@ config MONREADER
config MONWRITER
tristate "API for writing z/VM monitor service records"
depends on S390
default "m"
help
Character device driver for writing z/VM monitor service records
endmenu
menu "Cryptographic devices"
config ZCRYPT
tristate "Support for PCI-attached cryptographic adapters"
select ZCRYPT_MONOLITHIC if ZCRYPT="y"
default "m"
help
Select this option if you want to use a PCI-attached cryptographic
adapter like:
+ PCI Cryptographic Accelerator (PCICA)
+ PCI Cryptographic Coprocessor (PCICC)
+ PCI-X Cryptographic Coprocessor (PCIXCC)
+ Crypto Express2 Coprocessor (CEX2C)
+ Crypto Express2 Accelerator (CEX2A)
config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module"
depends on ZCRYPT="m"
help
Select this option if you want to have a single module z90crypt.ko
that contains all parts of the crypto device driver (ap bus,
request router and all the card drivers).
endmenu
......@@ -3,7 +3,7 @@ menu "S/390 network device drivers"
config LCS
tristate "Lan Channel Station Interface"
depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM S/390
or zSeries. This device driver supports Token Ring (IEEE 802.5),
......@@ -13,7 +13,7 @@ config LCS
config CTC
tristate "CTC device support"
depends on NETDEVICES
depends on CCW && NETDEVICES
help
Select this option if you want to use channel-to-channel networking
on IBM S/390 or zSeries. This device driver supports real CTC
......@@ -42,7 +42,7 @@ config SMSGIUCV
config CLAW
tristate "CLAW device support"
depends on NETDEVICES
depends on CCW && NETDEVICES
help
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
......@@ -52,7 +52,7 @@ config CLAW
config QETH
tristate "Gigabit Ethernet device support"
depends on NETDEVICES && IP_MULTICAST && QDIO
depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
help
This driver supports the IBM S/390 and zSeries OSA Express adapters
in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
......
......@@ -10,7 +10,7 @@
#define _ASMS390_PARAM_H
#ifdef __KERNEL__
# define HZ 100 /* Internal kernel timer frequency */
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment