V4L/DVB (3319): Changed indention for define's and their values

- Indention for values of several request defines were not TabSized=8.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>

drivers/media/dvb/dvb-usb/vp702x.h

@@ -13,47 +13,47 @@ extern int dvb_usb_vp702x_debug;
 /* commands are read and written with USB control messages */
 
 /* consecutive read/write operation */
-#define REQUEST_OUT       0xB2
-#define REQUEST_IN		  0xB3
+#define REQUEST_OUT		0xB2
+#define REQUEST_IN		0xB3
 
 /* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0
  * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer
  * the returning buffer looks as follows
  * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */
 
-#define GET_TUNER_STATUS  0x05
+#define GET_TUNER_STATUS	0x05
 /* additional in buffer:
  * 0   1   2    3              4   5   6               7       8
  * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */
 
-#define GET_SYSTEM_STRING 0x06
+#define GET_SYSTEM_STRING	0x06
 /* additional in buffer:
  * 0   1   2   3   4   5   6   7   8
  * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */
 
-#define SET_DISEQC_CMD    0x08
+#define SET_DISEQC_CMD		0x08
 /* additional out buffer:
  * 0    1  2  3  4
  * len  X1 X2 X3 X4
  * additional in buffer:
  * 0   1 2
- * N/A 0 0   b[1] == b[2] == 0 -> success otherwise not */
+ * N/A 0 0   b[1] == b[2] == 0 -> success, failure otherwise */
 
-#define SET_LNB_POWER     0x09
+#define SET_LNB_POWER		0x09
 /* additional out buffer:
  * 0    1    2
  * 0x00 0xff 1 = on, 0 = off
  * additional in buffer:
  * 0   1 2
- * N/A 0 0   b[1] == b[2] == 0 -> success otherwise not */
+ * N/A 0 0   b[1] == b[2] == 0 -> success failure otherwise */
 
-#define GET_MAC_ADDRESS   0x0A
+#define GET_MAC_ADDRESS		0x0A
 /* #define GET_MAC_ADDRESS   0x0B */
 /* additional in buffer:
  * 0   1   2            3    4    5    6    7    8
  * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */
 
-#define SET_PID_FILTER    0x11
+#define SET_PID_FILTER		0x11
 /* additional in buffer:
  * 0        1        ... 14       15       16
  * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */
@@ -64,39 +64,38 @@ extern int dvb_usb_vp702x_debug;
  * freq0 freq1 divstep srate0 srate1 srate2 flag chksum
  */
 
-
 /* one direction requests */
-#define READ_REMOTE_REQ       0xB4
+#define READ_REMOTE_REQ		0xB4
 /* IN  i: 0; v: 0; b[0] == request, b[1] == key */
 
-#define READ_PID_NUMBER_REQ   0xB5
+#define READ_PID_NUMBER_REQ	0xB5
 /* IN  i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */
 
-#define WRITE_EEPROM_REQ      0xB6
+#define WRITE_EEPROM_REQ	0xB6
 /* OUT i: offset; v: value to write; no extra buffer */
 
-#define READ_EEPROM_REQ       0xB7
+#define READ_EEPROM_REQ		0xB7
 /* IN  i: bufferlen; v: offset; buffer with bufferlen bytes */
 
-#define READ_STATUS           0xB8
+#define READ_STATUS		0xB8
 /* IN  i: 0; v: 0; bufferlen 10 */
 
-#define READ_TUNER_REG_REQ    0xB9
+#define READ_TUNER_REG_REQ	0xB9
 /* IN  i: 0; v: register; b[0] = value */
 
-#define READ_FX2_REG_REQ      0xBA
+#define READ_FX2_REG_REQ	0xBA
 /* IN  i: offset; v: 0; b[0] = value */
 
-#define WRITE_FX2_REG_REQ     0xBB
+#define WRITE_FX2_REG_REQ	0xBB
 /* OUT i: offset; v: value to write; 1 byte extra buffer */
 
-#define SET_TUNER_POWER_REQ   0xBC
+#define SET_TUNER_POWER_REQ	0xBC
 /* IN  i: 0 = power off, 1 = power on */
 
-#define WRITE_TUNER_REG_REQ   0xBD
+#define WRITE_TUNER_REG_REQ	0xBD
 /* IN  i: register, v: value to write, no extra buffer */
 
-#define RESET_TUNER           0xBE
+#define RESET_TUNER		0xBE
 /* IN  i: 0, v: 0, no extra buffer */
 
 extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);