Commit 3cf26753 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by Jeff Garzik

sky2: debug interface

Add an optional debug interface for displaying state of transmit/receive
rings. Creates a file debugfs/sky2/ethX for each device that is up.
Signed-off-by: default avatarStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 55d7b4e6
...@@ -2133,6 +2133,16 @@ config SKY2 ...@@ -2133,6 +2133,16 @@ config SKY2
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended. will be called sky2. This is recommended.
config SKY2_DEBUG
bool "Debugging interface"
depends on SKY2 && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
The file debugfs/sky2/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
config SK98LIN config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
depends on PCI depends on PCI
......
...@@ -39,6 +39,7 @@ ...@@ -39,6 +39,7 @@
#include <linux/workqueue.h> #include <linux/workqueue.h>
#include <linux/if_vlan.h> #include <linux/if_vlan.h>
#include <linux/prefetch.h> #include <linux/prefetch.h>
#include <linux/debugfs.h>
#include <linux/mii.h> #include <linux/mii.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -1574,13 +1575,13 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) ...@@ -1574,13 +1575,13 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
if (unlikely(netif_msg_tx_done(sky2))) if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n", printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx); dev->name, idx);
sky2->net_stats.tx_packets++; sky2->net_stats.tx_packets++;
sky2->net_stats.tx_bytes += re->skb->len; sky2->net_stats.tx_bytes += re->skb->len;
dev_kfree_skb_any(re->skb); dev_kfree_skb_any(re->skb);
sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
} }
le->opcode = 0; /* paranoia */
} }
sky2->tx_cons = idx; sky2->tx_cons = idx;
...@@ -3470,6 +3471,195 @@ static const struct ethtool_ops sky2_ethtool_ops = { ...@@ -3470,6 +3471,195 @@ static const struct ethtool_ops sky2_ethtool_ops = {
.get_perm_addr = ethtool_op_get_perm_addr, .get_perm_addr = ethtool_op_get_perm_addr,
}; };
#ifdef CONFIG_SKY2_DEBUG
static struct dentry *sky2_debug;
static int sky2_debug_show(struct seq_file *seq, void *v)
{
struct net_device *dev = seq->private;
const struct sky2_port *sky2 = netdev_priv(dev);
const struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
unsigned idx, last;
int sop;
if (!netif_running(dev))
return -ENETDOWN;
seq_printf(seq, "IRQ src=%x mask=%x control=%x\n",
sky2_read32(hw, B0_ISRC),
sky2_read32(hw, B0_IMSK),
sky2_read32(hw, B0_Y2_SP_ICR));
netif_poll_disable(hw->dev[0]);
last = sky2_read16(hw, STAT_PUT_IDX);
if (hw->st_idx == last)
seq_puts(seq, "Status ring (empty)\n");
else {
seq_puts(seq, "Status ring\n");
for (idx = hw->st_idx; idx != last && idx < STATUS_RING_SIZE;
idx = RING_NEXT(idx, STATUS_RING_SIZE)) {
const struct sky2_status_le *le = hw->st_le + idx;
seq_printf(seq, "[%d] %#x %d %#x\n",
idx, le->opcode, le->length, le->status);
}
seq_puts(seq, "\n");
}
seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
sky2->tx_cons, sky2->tx_prod,
sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
/* Dump contents of tx ring */
sop = 1;
for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE;
idx = RING_NEXT(idx, TX_RING_SIZE)) {
const struct sky2_tx_le *le = sky2->tx_le + idx;
u32 a = le32_to_cpu(le->addr);
if (sop)
seq_printf(seq, "%u:", idx);
sop = 0;
switch(le->opcode & ~HW_OWNER) {
case OP_ADDR64:
seq_printf(seq, " %#x:", a);
break;
case OP_LRGLEN:
seq_printf(seq, " mtu=%d", a);
break;
case OP_VLAN:
seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
break;
case OP_TCPLISW:
seq_printf(seq, " csum=%#x", a);
break;
case OP_LARGESEND:
seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
break;
case OP_PACKET:
seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
break;
case OP_BUFFER:
seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
break;
default:
seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
a, le16_to_cpu(le->length));
}
if (le->ctrl & EOP) {
seq_putc(seq, '\n');
sop = 1;
}
}
seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
netif_poll_enable(hw->dev[0]);
return 0;
}
static int sky2_debug_open(struct inode *inode, struct file *file)
{
return single_open(file, sky2_debug_show, inode->i_private);
}
static const struct file_operations sky2_debug_fops = {
.owner = THIS_MODULE,
.open = sky2_debug_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/*
* Use network device events to create/remove/rename
* debugfs file entries
*/
static int sky2_device_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev = ptr;
if (dev->open == sky2_up) {
struct sky2_port *sky2 = netdev_priv(dev);
switch(event) {
case NETDEV_CHANGENAME:
if (!netif_running(dev))
break;
/* fallthrough */
case NETDEV_DOWN:
case NETDEV_GOING_DOWN:
if (sky2->debugfs) {
printk(KERN_DEBUG PFX "%s: remove debugfs\n",
dev->name);
debugfs_remove(sky2->debugfs);
sky2->debugfs = NULL;
}
if (event != NETDEV_CHANGENAME)
break;
/* fallthrough for changename */
case NETDEV_UP:
if (sky2_debug) {
struct dentry *d;
d = debugfs_create_file(dev->name, S_IRUGO,
sky2_debug, dev,
&sky2_debug_fops);
if (d == NULL || IS_ERR(d))
printk(KERN_INFO PFX
"%s: debugfs create failed\n",
dev->name);
else
sky2->debugfs = d;
}
break;
}
}
return NOTIFY_DONE;
}
static struct notifier_block sky2_notifier = {
.notifier_call = sky2_device_event,
};
static __init void sky2_debug_init(void)
{
struct dentry *ent;
ent = debugfs_create_dir("sky2", NULL);
if (!ent || IS_ERR(ent))
return;
sky2_debug = ent;
register_netdevice_notifier(&sky2_notifier);
}
static __exit void sky2_debug_cleanup(void)
{
if (sky2_debug) {
unregister_netdevice_notifier(&sky2_notifier);
debugfs_remove(sky2_debug);
sky2_debug = NULL;
}
}
#else
#define sky2_debug_init()
#define sky2_debug_cleanup()
#endif
/* Initialize network device */ /* Initialize network device */
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
unsigned port, unsigned port,
...@@ -3960,12 +4150,14 @@ static struct pci_driver sky2_driver = { ...@@ -3960,12 +4150,14 @@ static struct pci_driver sky2_driver = {
static int __init sky2_init_module(void) static int __init sky2_init_module(void)
{ {
sky2_debug_init();
return pci_register_driver(&sky2_driver); return pci_register_driver(&sky2_driver);
} }
static void __exit sky2_cleanup_module(void) static void __exit sky2_cleanup_module(void)
{ {
pci_unregister_driver(&sky2_driver); pci_unregister_driver(&sky2_driver);
sky2_debug_cleanup();
} }
module_init(sky2_init_module); module_init(sky2_init_module);
......
...@@ -1998,6 +1998,7 @@ struct sky2_port { ...@@ -1998,6 +1998,7 @@ struct sky2_port {
struct sky2_tx_le *tx_le; struct sky2_tx_le *tx_le;
u16 tx_cons; /* next le to check */ u16 tx_cons; /* next le to check */
u16 tx_prod; /* next le to use */ u16 tx_prod; /* next le to use */
u16 tx_next; /* debug only */
u32 tx_addr64; u32 tx_addr64;
u16 tx_pending; u16 tx_pending;
u16 tx_last_mss; u16 tx_last_mss;
...@@ -2028,6 +2029,9 @@ struct sky2_port { ...@@ -2028,6 +2029,9 @@ struct sky2_port {
enum flow_control flow_mode; enum flow_control flow_mode;
enum flow_control flow_status; enum flow_control flow_status;
#ifdef CONFIG_SKY2_DEBUG
struct dentry *debugfs;
#endif
struct net_device_stats net_stats; struct net_device_stats net_stats;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment