MUSB: Add more TUSB endpoints

Add a new fifo configuration that makes better use of the memory
available for use as TUSB fifos, and all the endpoint hardware.
Now almost every endpoint is available, and that's the default
setup.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

drivers/usb/musb/plat_uds.c

@@ -767,7 +767,11 @@ static void musb_shutdown(struct platform_device *pdev)
 #define	can_dynfifo()	0
 #endif
 
+#ifdef CONFIG_USB_TUSB6010
+static ushort __devinitdata fifo_mode = 4;
+#else
 static ushort __devinitdata fifo_mode = 2;
+#endif
 
 /* "modprobe ... fifo_mode=1" etc */
 module_param(fifo_mode, ushort, 0);
@@ -829,6 +833,38 @@ static const struct fifo_cfg __devinitdata mode_3_cfg[] = {
 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
 };
 
+/* mode 4 - fits in 16KB */
+static const struct fifo_cfg __devinitdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
 
 /*
  * configure a fifo; for non-shared endpoints, this may be called
@@ -939,6 +975,10 @@ static int __devinit ep_config_from_table(struct musb *musb)
 		cfg = mode_3_cfg;
 		n = ARRAY_SIZE(mode_3_cfg);
 		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
 	}
 
 	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",