Commit 05d3794a authored by Linus Torvalds's avatar Linus Torvalds
parents 30121624 0b405a0f
......@@ -7,7 +7,6 @@ that support it. For example, a given bus might look like this:
|-- 0000:17:00.0
| |-- class
| |-- config
| |-- detach_state
| |-- device
| |-- irq
| |-- local_cpus
......@@ -19,7 +18,7 @@ that support it. For example, a given bus might look like this:
| |-- subsystem_device
| |-- subsystem_vendor
| `-- vendor
`-- detach_state
`-- ...
The topmost element describes the PCI domain and bus number. In this case,
the domain number is 0000 and the bus number is 17 (both values are in hex).
......@@ -31,7 +30,6 @@ files, each with their own function.
---- --------
class PCI class (ascii, ro)
config PCI config space (binary, rw)
detach_state connection status (bool, rw)
device PCI device (ascii, ro)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
......@@ -85,4 +83,4 @@ useful return codes should be provided.
Legacy resources are protected by the HAVE_PCI_LEGACY define. Platforms
wishing to support legacy functionality should define it and provide
pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
\ No newline at end of file
pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
......@@ -207,27 +207,6 @@ SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
#READY_AFTER_RESUME
#
Driver Detach Power Management
The kernel now supports the ability to place a device in a low-power
state when it is detached from its driver, which happens when its
module is removed.
Each device contains a 'detach_state' file in its sysfs directory
which can be used to control this state. Reading from this file
displays what the current detach state is set to. This is 0 (On) by
default. A user may write a positive integer value to this file in the
range of 1-4 inclusive.
A value of 1-3 will indicate the device should be placed in that
low-power state, which will cause ->suspend() to be called for that
device. A value of 4 indicates that the device should be shutdown, so
->shutdown() will be called for that device.
The driver is responsible for reinitializing the device when the
module is re-inserted during it's ->probe() (or equivalent) method.
The driver core will not call any extra functions when binding the
device to the driver.
pm_message_t meaning
......
......@@ -347,8 +347,8 @@ address that is created by firmware. An example vty-server sysfs entry
looks like the following:
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
. current_vty devspec name partner_vtys
.. detach_state index partner_clcs vterm_state
. current_vty devspec name partner_vtys
.. index partner_clcs vterm_state
Each entry is provided, by default with a "name" attribute. Reading the
"name" attribute will reveal the device type as shown in the following
......
# Makefile for the Linux device tree
obj-y := core.o sys.o interface.o bus.o \
obj-y := core.o sys.o bus.o \
driver.o class.o class_simple.o platform.o \
cpu.o firmware.o init.o map.o dmapool.o \
attribute_container.o transport_class.o
......
......@@ -390,7 +390,6 @@ void device_release_driver(struct device * dev)
sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
sysfs_remove_link(&dev->kobj, "driver");
list_del_init(&dev->driver_list);
device_detach_shutdown(dev);
if (drv->remove)
drv->remove(dev);
dev->driver = NULL;
......
......@@ -31,8 +31,6 @@ int (*platform_notify_remove)(struct device * dev) = NULL;
#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
extern struct attribute * dev_default_attrs[];
static ssize_t
dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
{
......@@ -89,7 +87,6 @@ static void device_release(struct kobject * kobj)
static struct kobj_type ktype_device = {
.release = device_release,
.sysfs_ops = &dev_sysfs_ops,
.default_attrs = dev_default_attrs,
};
......
/*
* drivers/base/interface.c - common driverfs interface that's exported to
* the world for all devices.
*
* Copyright (c) 2002-3 Patrick Mochel
* Copyright (c) 2002-3 Open Source Development Labs
*
* This file is released under the GPLv2
*
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/stat.h>
#include <linux/string.h>
/**
* detach_state - control the default power state for the device.
*
* This is the state the device enters when it's driver module is
* unloaded. The value is an unsigned integer, in the range of 0-4.
* '0' indicates 'On', so no action will be taken when the driver is
* unloaded. This is the default behavior.
* '4' indicates 'Off', meaning the driver core will call the driver's
* shutdown method to quiesce the device.
* 1-3 indicate a low-power state for the device to enter via the
* driver's suspend method.
*/
static ssize_t detach_show(struct device * dev, char * buf)
{
return sprintf(buf, "%u\n", dev->detach_state);
}
static ssize_t detach_store(struct device * dev, const char * buf, size_t n)
{
u32 state;
state = simple_strtoul(buf, NULL, 10);
if (state > 4)
return -EINVAL;
dev->detach_state = state;
return n;
}
static DEVICE_ATTR(detach_state, 0644, detach_show, detach_store);
struct attribute * dev_default_attrs[] = {
&dev_attr_detach_state.attr,
NULL,
};
enum {
DEVICE_PM_ON,
DEVICE_PM1,
DEVICE_PM2,
DEVICE_PM3,
DEVICE_PM_OFF,
};
/*
* shutdown.c
*/
extern int device_detach_shutdown(struct device *);
extern void device_shutdown(void);
......
......@@ -22,8 +22,17 @@ extern int sysdev_resume(void);
int resume_device(struct device * dev)
{
if (dev->bus && dev->bus->resume)
if (dev->power.pm_parent
&& dev->power.pm_parent->power.power_state) {
dev_err(dev, "PM: resume from %d, parent %s still %d\n",
dev->power.power_state,
dev->power.pm_parent->bus_id,
dev->power.pm_parent->power.power_state);
}
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
return dev->bus->resume(dev);
}
return 0;
}
......
......@@ -19,20 +19,6 @@
extern struct subsystem devices_subsys;
int device_detach_shutdown(struct device * dev)
{
if (!dev->detach_state)
return 0;
if (dev->detach_state == DEVICE_PM_OFF) {
if (dev->driver && dev->driver->shutdown)
dev->driver->shutdown(dev);
return 0;
}
return dpm_runtime_suspend(dev, dev->detach_state);
}
/**
* We handle system devices differently - we suspend and shut them
* down last and resume them first. That way, we don't do anything stupid like
......@@ -52,13 +38,12 @@ void device_shutdown(void)
struct device * dev;
down_write(&devices_subsys.rwsem);
list_for_each_entry_reverse(dev, &devices_subsys.kset.list, kobj.entry) {
pr_debug("shutting down %s: ", dev->bus_id);
list_for_each_entry_reverse(dev, &devices_subsys.kset.list,
kobj.entry) {
if (dev->driver && dev->driver->shutdown) {
pr_debug("Ok\n");
dev_dbg(dev, "shutdown\n");
dev->driver->shutdown(dev);
} else
pr_debug("Ignored.\n");
}
}
up_write(&devices_subsys.rwsem);
......
......@@ -39,12 +39,25 @@ int suspend_device(struct device * dev, pm_message_t state)
{
int error = 0;
dev_dbg(dev, "suspending\n");
if (dev->power.power_state) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state, state);
}
if (dev->power.pm_parent
&& dev->power.pm_parent->power.power_state) {
dev_err(dev,
"PM: suspend %d->%d, parent %s already %d\n",
dev->power.power_state, state,
dev->power.pm_parent->bus_id,
dev->power.pm_parent->power.power_state);
}
dev->power.prev_state = dev->power.power_state;
if (dev->bus && dev->bus->suspend && !dev->power.power_state)
if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
dev_dbg(dev, "suspending\n");
error = dev->bus->suspend(dev, state);
}
return error;
}
......
......@@ -273,9 +273,6 @@ struct device {
BIOS data relevant to device) */
struct dev_pm_info power;
u32 detach_state; /* State to enter when device is
detached from its driver. */
u64 *dma_mask; /* dma mask (if dma'able device) */
u64 coherent_dma_mask;/* Like dma_mask, but for
alloc_coherent mappings as
......
......@@ -156,14 +156,14 @@ static int enter_state(suspend_state_t state)
goto Unlock;
}
pr_debug("PM: Preparing system for suspend\n");
pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
if ((error = suspend_prepare(state)))
goto Unlock;
pr_debug("PM: Entering state.\n");
pr_debug("PM: Entering %s sleep\n", pm_states[state]);
error = suspend_enter(state);
pr_debug("PM: Finishing up.\n");
pr_debug("PM: Finishing wakeup.\n");
suspend_finish(state);
Unlock:
up(&pm_sem);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment