Commit 01342358 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

V4L/DVB (3606): Minor layout changes to make it consistent

Signed-off-by: default avatarHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 51dab14e
......@@ -53,7 +53,7 @@ module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
static unsigned short normal_i2c[] = {
0x4a >>1, 0x48 >>1, /* SAA7113 */
0x4a >> 1, 0x48 >> 1, /* SAA7113 */
0x42 >> 1, 0x40 >> 1, /* SAA7114 and SAA7115 */
I2C_CLIENT_END };
......@@ -722,16 +722,16 @@ static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
100 reserved NTSC-Japan (3.58MHz)
*/
if (state->ident == V4L2_IDENT_SAA7113) {
u8 reg = saa7115_read(client, 0x0e) & 0x8f;
u8 reg = saa7115_read(client, 0x0e) & 0x8f;
if (std == V4L2_STD_PAL_M) {
reg|=0x30;
reg |= 0x30;
} else if (std == V4L2_STD_PAL_N) {
reg|=0x20;
reg |= 0x20;
} else if (std == V4L2_STD_PAL_60) {
reg|=0x10;
reg |= 0x10;
} else if (std == V4L2_STD_NTSC_M_JP) {
reg|=0x40;
reg |= 0x40;
}
saa7115_write(client, 0x0e, reg);
}
......@@ -811,7 +811,7 @@ static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo
u8 lcr[24];
int i, x;
/* saa7113/71144 doesn't yet support VBI */
/* saa7113/7114 doesn't yet support VBI */
if (state->ident != V4L2_IDENT_SAA7115)
return;
......@@ -1321,7 +1321,7 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind)
saa7115_write(client, 0, 5);
chip_id = saa7115_read(client, 0) & 0x0f;
if (chip_id <3 && chip_id > 5) {
if (chip_id < 3 && chip_id > 5) {
v4l_dbg(1, debug, client, "saa7115 not found\n");
kfree(client);
return 0;
......@@ -1360,7 +1360,7 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind)
v4l_dbg(1, debug, client, "writing init values\n");
/* init to 60hz/48khz */
if (state->ident==V4L2_IDENT_SAA7113)
if (state->ident == V4L2_IDENT_SAA7113)
saa7115_writeregs(client, saa7113_init_auto_input);
else
saa7115_writeregs(client, saa7115_init_auto_input);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment