Feed aggregator

OpenEmbed is developing the MeshWalkie, a handheld wireless device built around the ESP32-S3, SX1262 LoRa module, and L76K GNSS, using the enclosure of a Quansheng UV-K6 radio. The device is described as an open-source platform for LoRa, Wi-Fi, and GPS-based applications, including support for Meshtastic.   The MeshWalkie integrates several hardware components to support low-power […]

ASUS has recently unveiled a new ATX motherboard based on the Intel Q870 chipset, designed to support Intel Core Ultra Processors (Series 2) using the LGA1851 socket. While not yet officially launched, this upcoming board targets industrial computing and embedded applications with a combination of modern performance and legacy interface support. The motherboard supports processors […]

Tiliqua is a modular FPGA-based platform for Eurorack systems, launched on CrowdSupply. It supports real-time audio and video synthesis using open-source tools like Amaranth HDL, offering more flexibility and performance than typical microcontroller-based modules. The platform uses the “SoldierCrab” FPGA System-on-Module, which integrates an LFE5U-25F FPGA, PSRAM, a USB PHY, and SPI flash. This module […]

HydraLink is now available on CrowdSupply as a compact and open-source USB-to-Automotive Ethernet adapter intended for engineers, researchers, and others working with in-vehicle networks. It supports both 100BASE-T1 and 1000BASE-T1 over single-pair Ethernet, enabling direct access to automotive Ethernet without the need for media converters or additional lab equipment. HydraLink allows real-time packet forwarding between […]

The VP2430 is a compact, fanless network appliance based on Intel’s N-series platform. As part of the Vault Pro series, it builds on earlier models such as the VP2410 and VP2420, introducing incremental enhancements in processing capability, thermal management, and connectivity. This model incorporates the Intel N150 quad-core processor, operating at up to 3.6GHz with […]

The UnoNet is a microcontroller board based on the ATmega328PB, designed with the same form factor and pin layout as the Arduino Uno Rev 3. It integrates Ethernet via a W5500 controller and includes a USB Type-C port, RJ45 connector, DC barrel jack, ICSP header, and reset button. The ATmega328PB is clocked at 16 MHz […]

Cerebro is an upcoming clusterboard platform launching on Kickstarter, designed for AI, edge computing, and embedded development. It supports a range of compute modules including Raspberry Pi CM4 and CM5, NVIDIA Jetson, and Radxa CM5, providing a modular base for scalable systems. The board can host up to four compute nodes and includes an onboard, […]

The ESP32-C5-DevKitC-1 is another upcoming entry-level development board designed for IoT applications, featuring the ESP32-C5-WROOM-1 module. This board supports key wireless protocols, including Wi-Fi 6 (2.4 GHz and 5 GHz), Bluetooth LE 5, Zigbee, and Thread. The ESP32-C5-WROOM-1 module is equipped with a 32-bit RISC-V single-core processor running at 240 MHz along with 384 KB […]

April 2025 marked the start of the Open Home Foundation’s second year. Since its launch at the State of the Open Home 2024 event, the Foundation has grown rapidly, gaining broad community and industry support. Last month’s 2025 event highlighted key milestones from its first year and outlined plans for continued development. Over the past […]

The LILYGO T-Echo Lite is a compact wireless development board designed for embedded applications that require long-range communication, positioning, and low-power display capabilities. Built around the Nordic nRF52840 microcontroller, the platform supports a wide range of wireless protocols and is available in several hardware configurations. The main processing component is the nRF52840, a 64 MHz […]

The Luckfox Core1106 Smart 86 Box is a development board designed for integration into standard 86-type wall enclosures. Based on the Luckfox-Pico-86-Panel series, it features Rockchip’s RV1106G2 or RV1106G3 processor and is intended for use in smart home interfaces and industrial control systems. This device uses a single-core ARM Cortex-A7 processor with integrated NEON and […]

This month, Raspberry Pi announced a price reduction for two of its most widely used Compute Module 4 variants. As of May 1, 2025, the 4GB RAM version is now $5 cheaper, while the 8GB RAM version has been reduced by $10. These discounts apply to standard temperature models purchased through Raspberry Pi Approved Resellers. […]

Banana Pi’s new BPI-R4 is a 5G aggregation gateway built for edge networking. Designed to host multiple cellular modems, it supports OpenMPTCProuter and targets scenarios where wired internet is limited or unavailable. The BPI-R4 is based on the MediaTek Filogic 880 (MT7988A) platform, a quad-core processor running at 2.0 GHz, similar to the original Banana […]

The RVPC, a fully open source hardware and software retro-style computer project built around the CH32V003 microcontroller, now supports a BASIC interpreter. This update further expands the capabilities of the €1 RISC-V-based system, which already features VGA output and PS/2 keyboard input, despite its extremely limited resources. Originally conceived as a DIY challenge, the RVPC […]

M5Stack is preparing to launch the Tab5, a 5-inch smart touch terminal powered by the ESP32-P4 RISC-V processor, in early May. Designed as a compact and integrated platform for interactive applications, the device combines a multi-touch display, flexible I/O options, and wireless connectivity within a modular form factor. The Tab5 features a 5-inch IPS display […]

The MINIX Elite EU715-AI is a compact mini PC based on Intel’s Meteor Lake-H processor architecture. It features integrated Intel Arc Graphics, Wi-Fi 6E, dual 2.5G Ethernet ports, and quad-screen display support. The system runs Windows 11 Pro and comes equipped with 32 GB of DDR5 SO-DIMM memory, configured as two 16 GB modules. For […]

AnalogLamb has introduced three new RISC-V development boards based on the ESP32-C6, designed for low-cost, full-function, and low-power IoT applications. These boards feature Espressif’s first Wi-Fi 6 SoC, integrating Wi-Fi 6 (2.4 GHz), Bluetooth 5 LE, and IEEE 802.15.4 protocols. Each board is built around the ESP32-C6-WROOM-1 module, which combines a high-performance 32-bit RISC-V core […]

Minisforum recently introduced the MS-A2, a compact workstation featuring high-end AMD processors, support for up to 96GB of memory, and flexible storage options. It offers PCIe expansion, triple 8K display output, and fast wired and wireless connectivity, targeting users who need strong performance in a small footprint. The MS-A2 is a compact computing platform built […]

Zalmotek expands its Feather System on Module portfolio with high-performance options designed for advanced embedded systems. These modules are based on Renesas processors and follow the Feather form factor, enabling flexibility for robotics, industrial control, and edge computing applications. The RA6M1 Feather SoM features an Arm Cortex-M4 CPU operating at up to 120 MHz, paired […]

The NUCLEO-WBA65RI is a wireless STM32 Nucleo-64 development board built around the STM32WBA65RIV7 microcontroller. It combines the MB2130 MCU RF board with the MB1801 mezzanine board to support Bluetooth LE and IEEE 802.15.4-based protocols such as Thread, Matter, and Zigbee. The STM32WBA65RIV7 microcontroller is a 32-bit Arm Cortex-M33 device featuring 2 MB of flash and […]