Skip to content

L
libdvbpsi
Commit 28862128 authored by Arnaud de Bossoreille de Ribou's avatar Arnaud de Bossoreille de Ribou
Browse files
Options

Doxygen documentation.

parent 27375b1a
Show whitespace changes
Inline Side-by-side
Showing with 1333 additions and 114 deletions
Makefile.am
View file @ 28862128
## Process this file with automake to produce Makefile.in ## Process this file with automake to produce Makefile.in
SUBDIRS = src examples misc SUBDIRS = src examples misc doc
doc-dummy:
doc: doc-dummy
$(MAKE) -C doc doc
Makefile.in
View file @ 28862128
...@@ -74,7 +74,7 @@ RANLIB = @RANLIB@ ...@@ -74,7 +74,7 @@ RANLIB = @RANLIB@
STRIP = @STRIP@ STRIP = @STRIP@
VERSION = @VERSION@ VERSION = @VERSION@
SUBDIRS = src examples misc SUBDIRS = src examples misc doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ./src/config.h CONFIG_HEADER = ./src/config.h
...@@ -329,6 +329,11 @@ installdirs mostlyclean-generic distclean-generic clean-generic \ ...@@ -329,6 +329,11 @@ installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean maintainer-clean-generic clean mostlyclean distclean maintainer-clean
doc-dummy:
doc: doc-dummy
$(MAKE) -C doc doc
# Tell versions [3.59,3.63) of GNU make to not export all variables. # Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded. # Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: .NOEXPORT:
configure
View file @ 28862128
...@@ -1930,7 +1930,7 @@ else ...@@ -1930,7 +1930,7 @@ else
if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do for file in conftest.*; do
case $file in case $file in
*.c | *.o | *.obj) ;; *.$ac_ext | *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac esac
done done
...@@ -5507,7 +5507,7 @@ done ...@@ -5507,7 +5507,7 @@ done
ac_given_srcdir=$srcdir ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL" ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "Makefile src/Makefile src/tables/Makefile examples/Makefile misc/Makefile src/config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 trap 'rm -fr `echo "Makefile src/Makefile src/tables/Makefile examples/Makefile misc/Makefile doc/Makefile src/config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF EOF
cat >> $CONFIG_STATUS <<EOF cat >> $CONFIG_STATUS <<EOF
...@@ -5610,7 +5610,7 @@ EOF ...@@ -5610,7 +5610,7 @@ EOF
cat >> $CONFIG_STATUS <<EOF cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile src/Makefile src/tables/Makefile examples/Makefile misc/Makefile"} CONFIG_FILES=\${CONFIG_FILES-"Makefile src/Makefile src/tables/Makefile examples/Makefile misc/Makefile doc/Makefile"}
EOF EOF
cat >> $CONFIG_STATUS <<\EOF cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
......
configure.in
View file @ 28862128
...@@ -42,7 +42,7 @@ else ...@@ -42,7 +42,7 @@ else
fi fi
AC_OUTPUT([Makefile src/Makefile src/tables/Makefile examples/Makefile misc/Makefile]) AC_OUTPUT([Makefile src/Makefile src/tables/Makefile examples/Makefile misc/Makefile doc/Makefile])
echo " echo "
libdvbpsi configuration libdvbpsi configuration
......
doc/Makefile.am 0 → 100644
View file @ 28862128
## Process this file with automake to produce Makefile.in
EXTRA_DIST=doxygen.cfg
doc:
doxygen doxygen.cfg
doc/Makefile.in 0 → 100644
View file @ 28862128
# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AS = @AS@
CC = @CC@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EXEEXT = @EXEEXT@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAKEINFO = @MAKEINFO@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
STRIP = @STRIP@
VERSION = @VERSION@
EXTRA_DIST = doxygen.cfg
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../src/config.h
CONFIG_CLEAN_FILES =
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
tags: TAGS
TAGS:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
subdir = doc
distdir: $(DISTFILES)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(top_distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am:
install-exec: install-exec-am
install-data-am:
install-data: install-data-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am:
uninstall: uninstall-am
all-am: Makefile
all-redirect: all-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-generic
mostlyclean: mostlyclean-am
clean-am: clean-generic mostlyclean-am
clean: clean-am
distclean-am: distclean-generic clean-am
-rm -f libtool
distclean: distclean-am
maintainer-clean-am: maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
.PHONY: tags distdir info-am info dvi-am dvi check check-am \
installcheck-am installcheck install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean
doc:
doxygen doxygen.cfg
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
doc/doxygen.cfg 0 → 100644
View file @ 28862128
# Doxyfile 1.2.14
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project
#
# All text after a hash (#) is considered a comment and will be ignored
# The format is:
# TAG = value [value, ...]
# For lists items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ")
#---------------------------------------------------------------------------
# General configuration options
#---------------------------------------------------------------------------
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.
PROJECT_NAME = libdvbpsi
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or
# if some version control system is used.
PROJECT_NUMBER = 0.1.0
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
# base path where the generated documentation will be put.
# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.
OUTPUT_DIRECTORY = doxygen
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
# The default language is English, other supported languages are:
# Brazilian, Chinese, Croatian, Czech, Danish, Dutch, Finnish, French,
# German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish,
# Portuguese, Romanian, Russian, Slovak, Slovene, Spanish and Swedish.
OUTPUT_LANGUAGE = English
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation.
EXTRACT_PRIVATE = NO
# If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation.
EXTRACT_STATIC = NO
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members of documented classes, files or namespaces.
# If set to NO (the default) these members will be included in the
# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = NO
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these class will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = NO
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# include brief member descriptions after the members that are listed in
# the file and class documentation (similar to JavaDoc).
# Set to NO to disable this.
BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
# description.
ALWAYS_DETAILED_SEC = NO
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
# members of a class in the documentation of that class as if those members were
# ordinary class members. Constructors, destructors and assignment operators of
# the base classes will not be shown.
INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = NO
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
# can be used to strip a user defined part of the path. Stripping is
# only done if one of the specified strings matches the left-hand part of
# the path. It is allowed to use relative paths in the argument list.
STRIP_FROM_PATH =
# The INTERNAL_DOCS tag determines if documentation
# that is typed after a \internal command is included. If the tag is set
# to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
# doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
# file names in lower case letters. If set to YES upper case letters are also
# allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows
# users are adviced to set this option to NO.
CASE_SENSE_NAMES = YES
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
# (but less readable) file names. This can be useful is your file systems
# doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
# will put list of the files that are included by a file in the documentation
# of that file.
SHOW_INCLUDE_FILES = YES
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style
# comment as the brief description. If set to NO, the JavaDoc
# comments will behave just like the Qt-style comments (thus requiring an
# explict @brief command for a brief description.
JAVADOC_AUTOBRIEF = NO
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
# member inherits the documentation from any documented member that it
# reimplements.
INHERIT_DOCS = YES
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members.
INLINE_INFO = YES
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
# will sort the (detailed) documentation of file and class members
# alphabetically by member name. If set to NO the members will appear in
# declaration order.
SORT_MEMBER_DOCS = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8
# The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation.
GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test
# commands in the documentation.
GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or
# disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation.
GENERATE_BUGLIST = YES
# This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.
ALIASES =
# The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif.
ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or define consist of for it to appear in
# the documentation. If the initializer consists of more lines than specified
# here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and defines in the
# documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C.
# For instance some of the names that are used will be different. The list
# of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = YES
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES
#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = NO
# The WARNINGS tag can be used to turn on/off the warning messages that are
# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
WARNINGS = YES
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled.
WARN_IF_UNDOCUMENTED = YES
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# tags, which will be replaced by the file and line number from which the
# warning originated and the warning text.
WARN_FORMAT = "$file:$line: $text"
# The WARN_LOGFILE tag can be used to specify a file to which warning
# and error messages should be written. If left blank the output is written
# to stderr.
WARN_LOGFILE =
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
# The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
INPUT = ../src ../src/tables
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank the following patterns are tested:
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
# *.h++ *.idl *.odl
FILE_PATTERNS = *.h
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
# should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used.
RECURSIVE = NO
# The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
EXCLUDE = ../src/config.h
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
# that are symbolic links (a Unix filesystem feature) are excluded from the input.
EXCLUDE_SYMLINKS = NO
# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories.
EXCLUDE_PATTERNS = *_private.h
# The EXAMPLE_PATH tag can be used to specify one or more files or
# directories that contain example code fragments that are included (see
# the \include command).
EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank all files are included.
EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude
# commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = NO
# The IMAGE_PATH tag can be used to specify one or more files or
# directories that contain image that are included in the documentation (see
# the \image command).
IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command <filter> <input-file>, where <filter>
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes
# to standard output.
INPUT_FILTER =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse.
FILTER_SOURCE_FILES = NO
#---------------------------------------------------------------------------
# configuration options related to source browsing
#---------------------------------------------------------------------------
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sources.
SOURCE_BROWSER = NO
# Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation.
INLINE_SOURCES = NO
# If the REFERENCED_BY_RELATION tag is set to YES (the default)
# then for each documented function all documented
# functions referencing it will be listed.
REFERENCED_BY_RELATION = YES
# If the REFERENCES_RELATION tag is set to YES (the default)
# then for each documented function all documented entities
# called/used by that function will be listed.
REFERENCES_RELATION = YES
#---------------------------------------------------------------------------
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = NO
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 5
# In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers.
IGNORE_PREFIX =
#---------------------------------------------------------------------------
# configuration options related to the HTML output
#---------------------------------------------------------------------------
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output.
GENERATE_HTML = YES
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = html
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a
# standard header.
HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user defined cascading
# style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet
HTML_STYLESHEET =
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
# will be generated that can be used as input for tools like the
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
# of the generated HTML documentation.
GENERATE_HTMLHELP = NO
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
# controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO).
GENERATE_CHI = NO
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file.
BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the Html help documentation and to the tree view.
TOC_EXPAND = NO
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it.
DISABLE_INDEX = NO
# This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation.
ENUM_VALUES_PER_LINE = 4
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
# generated containing a tree-like index structure (just like the one that
# is generated for HTML Help). For this to work a browser that supports
# JavaScript and frames is required (for instance Mozilla, Netscape 4.0+,
# or Internet explorer 4.0+). Note that for large projects the tree generation
# can take a very long time. In such cases it is better to disable this feature.
# Windows users are probably better off using the HTML help feature.
GENERATE_TREEVIEW = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
TREEVIEW_WIDTH = 250
#---------------------------------------------------------------------------
# configuration options related to the LaTeX output
#---------------------------------------------------------------------------
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
GENERATE_LATEX = YES
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, a4wide, letter, legal and
# executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output.
EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing!
LATEX_HEADER =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation.
USE_PDFLATEX = NO
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
# command to the generated LaTeX files. This will instruct LaTeX to keep
# running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO
#---------------------------------------------------------------------------
# configuration options related to the RTF output
#---------------------------------------------------------------------------
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimised for Word 97 and may not look very pretty with
# other RTF readers or editors.
GENERATE_RTF = NO
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
# RTF documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_RTF = NO
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other
# programs which support those fields.
# Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO
# Load stylesheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assigments. You only have to provide
# replacements, missing definitions are set to their default value.
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file.
RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# configuration options related to the man page output
#---------------------------------------------------------------------------
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages
GENERATE_MAN = NO
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man
# The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
# then it will generate one additional man file for each entity
# documented in the real man page(s). These additional files
# only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO.
MAN_LINKS = NO
#---------------------------------------------------------------------------
# configuration options related to the XML output
#---------------------------------------------------------------------------
# If the GENERATE_XML tag is set to YES Doxygen will
# generate an XML file that captures the structure of
# the code including all documentation. Note that this
# feature is still experimental and incomplete at the
# moment.
GENERATE_XML = NO
#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
# generate an AutoGen Definitions (see autogen.sf.net) file
# that captures the structure of the code including all
# documentation. Note that this feature is still experimental
# and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
# evaluate all C-preprocessor directives found in the sources and include
# files.
ENABLE_PREPROCESSING = YES
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
# names in the source code. If set to NO (the default) only conditional
# compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = NO
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_PREDEFINED tags.
EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by
# the preprocessor.
INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used.
INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that
# are defined before the preprocessor is started (similar to the -D option of
# gcc). The argument of the tag is a list of macros of the form: name
# or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed.
PREDEFINED =
# If the MACRO_EXPANSION and EXPAND_PREDEF_ONLY tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded.
# The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition.
EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are alone
# on a line and do not end with a semicolon. Such function macros are typically
# used for boiler-plate code, and will confuse the parser if not removed.
SKIP_FUNCTION_MACROS = YES
#---------------------------------------------------------------------------
# Configuration::addtions related to external references
#---------------------------------------------------------------------------
# The TAGFILES tag can be used to specify one or more tagfiles.
TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.
GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
# in the class index. If set to NO only the inherited external classes
# will be listed.
ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will
# be listed.
EXTERNAL_GROUPS = YES
# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl
#---------------------------------------------------------------------------
# Configuration options related to the dot tool
#---------------------------------------------------------------------------
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or
# super classes. Setting the tag to NO turns the diagrams off. Note that this
# option is superceded by the HAVE_DOT option below. This is only a fallback. It is
# recommended to install and use dot, since it yield more powerful graphs.
CLASS_DIAGRAMS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualization
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default)
HAVE_DOT = NO
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES
# If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances.
TEMPLATE_RELATIONS = YES
# If set to YES, the inheritance and collaboration graphs will hide
# inheritance and usage relations if the target is undocumented
# or is not a class.
HIDE_UNDOC_RELATIONS = YES
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documented
# file showing the direct and indirect include dependencies of the file with
# other documented files.
INCLUDE_GRAPH = YES
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
# documented header file showing the documented files that directly or
# indirectly include this file.
INCLUDED_BY_GRAPH = YES
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. Possible values are gif, jpg, and png
# If left blank gif will be used.
DOT_IMAGE_FORMAT = gif
# The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found on the path.
DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the
# \dotfile command).
DOTFILE_DIRS =
# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
# (in pixels) of the graphs generated by dot. If a graph becomes larger than
# this value, doxygen will try to truncate the graph, so that it fits within
# the specified constraint. Beware that most browsers cannot cope with very
# large images.
MAX_DOT_GRAPH_WIDTH = 1024
# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
# (in pixels) of the graphs generated by dot. If a graph becomes larger than
# this value, doxygen will try to truncate the graph, so that it fits within
# the specified constraint. Beware that most browsers cannot cope with very
# large images.
MAX_DOT_GRAPH_HEIGHT = 1024
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs.
GENERATE_LEGEND = YES
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
# remove the intermedate dot files that are used to generate
# the various graphs.
DOT_CLEANUP = YES
#---------------------------------------------------------------------------
# Configuration::addtions related to the search engine
#---------------------------------------------------------------------------
# The SEARCHENGINE tag specifies whether or not a search engine should be
# used. If set to NO the values of all tags below this one will be ignored.
SEARCHENGINE = NO
# The CGI_NAME tag should be the name of the CGI script that
# starts the search engine (doxysearch) with the correct parameters.
# A script with this name will be generated by doxygen.
CGI_NAME = search.cgi
# The CGI_URL tag should be the absolute URL to the directory where the
# cgi binaries are located. See the documentation of your http daemon for
# details.
CGI_URL =
# The DOC_URL tag should be the absolute URL to the directory where the
# documentation is located. If left blank the absolute path to the
# documentation, with file:// prepended to it, will be used.
DOC_URL =
# The DOC_ABSPATH tag should be the absolute path to the directory where the
# documentation is located. If left blank the directory on the local machine
# will be used.
DOC_ABSPATH =
# The BIN_ABSPATH tag must point to the directory where the doxysearch binary
# is installed.
BIN_ABSPATH = /usr/local/bin/
# The EXT_DOC_PATHS tag can be used to specify one or more paths to
# documentation generated for other projects. This allows doxysearch to search
# the documentation for these projects as well.
EXT_DOC_PATHS =
src/descriptor.h
View file @ 28862128
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* descriptor.h: common descriptor structures * descriptor.h: common descriptor structures
*---------------------------------------------------------------------------- *----------------------------------------------------------------------------
* (c)2001-2002 VideoLAN * (c)2001-2002 VideoLAN
* $Id: descriptor.h,v 1.2 2002/03/15 12:16:01 bozo Exp $ * $Id: descriptor.h,v 1.3 2002/03/25 21:00:50 bozo Exp $
* *
* Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr> * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
* *
...@@ -34,26 +34,31 @@ extern "C" { ...@@ -34,26 +34,31 @@ extern "C" {
/***************************************************************************** /*****************************************************************************
* dvbpsi_descriptor_t * dvbpsi_descriptor_t
***************************************************************************** *****************************************************************************/
* This structure is used to store a descriptor. /*!This structure is used to store a descriptor.
* (ISO/IEC 13818-1 section 2.6). * (ISO/IEC 13818-1 section 2.6).
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_descriptor_s typedef struct dvbpsi_descriptor_s
{ {
uint8_t i_tag; /* descriptor_tag */ uint8_t i_tag; /*!< descriptor_tag */
uint8_t i_length; /* descriptor_length */ uint8_t i_length; /*!< descriptor_length */
uint8_t * p_data; /* content */ uint8_t * p_data; /*!< content */
struct dvbpsi_descriptor_s * p_next; struct dvbpsi_descriptor_s * p_next; /*!< next element of
the list */
} dvbpsi_descriptor_t; } dvbpsi_descriptor_t;
/***************************************************************************** /*****************************************************************************
* dvbpsi_NewDescriptor * dvbpsi_NewDescriptor
***************************************************************************** *****************************************************************************/
* Creation of a new dvbpsi_descriptor_t structure. /*!Creation of a new dvbpsi_descriptor_t structure.
* \param i_tag descriptor's tag
* \param i_length descriptor's length
* \param p_data descriptor's data
* \return a pointer to the descriptor.
*****************************************************************************/ *****************************************************************************/
dvbpsi_descriptor_t* dvbpsi_NewDescriptor(uint8_t i_tag, uint8_t i_length, dvbpsi_descriptor_t* dvbpsi_NewDescriptor(uint8_t i_tag, uint8_t i_length,
uint8_t* p_data); uint8_t* p_data);
...@@ -61,8 +66,10 @@ dvbpsi_descriptor_t* dvbpsi_NewDescriptor(uint8_t i_tag, uint8_t i_length, ...@@ -61,8 +66,10 @@ dvbpsi_descriptor_t* dvbpsi_NewDescriptor(uint8_t i_tag, uint8_t i_length,
/***************************************************************************** /*****************************************************************************
* dvbpsi_DeleteDescriptor * dvbpsi_DeleteDescriptor
***************************************************************************** *****************************************************************************/
* Destruction of a dvbpsi_descriptor_t structure. /*!Destruction of a dvbpsi_descriptor_t structure.
* \param p_descriptor pointer to the descriptor
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_DeleteDescriptor(dvbpsi_descriptor_t* p_descriptor); void dvbpsi_DeleteDescriptor(dvbpsi_descriptor_t* p_descriptor);
......
src/dvbpsi.h
View file @ 28862128
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* dvbpsi.h: main header * dvbpsi.h: main header
*---------------------------------------------------------------------------- *----------------------------------------------------------------------------
* (c)2001-2002 VideoLAN * (c)2001-2002 VideoLAN
* $Id: dvbpsi.h,v 1.3 2002/03/15 12:16:01 bozo Exp $ * $Id: dvbpsi.h,v 1.4 2002/03/25 21:00:50 bozo Exp $
* *
* Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr> * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
* *
...@@ -37,16 +37,19 @@ extern "C" { ...@@ -37,16 +37,19 @@ extern "C" {
/***************************************************************************** /*****************************************************************************
* dvbpsi_handle * dvbpsi_handle
***************************************************************************** *****************************************************************************/
* Decoder abstration. /*!Decoder abstration.
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_decoder_s * dvbpsi_handle; typedef struct dvbpsi_decoder_s * dvbpsi_handle;
/***************************************************************************** /*****************************************************************************
* dvbpsi_PushPacket * dvbpsi_PushPacket
***************************************************************************** *****************************************************************************/
* Injection of a TS packet into a PSI decoder. /*!Injection of a TS packet into a PSI decoder.
* \param h_dvbpsi handle to the decoder
* \param p_data pointer to a 188 bytes playload of a TS packet
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_PushPacket(dvbpsi_handle h_dvbpsi, uint8_t* p_data); void dvbpsi_PushPacket(dvbpsi_handle h_dvbpsi, uint8_t* p_data);
...@@ -60,8 +63,8 @@ typedef struct dvbpsi_psi_section_s dvbpsi_psi_section_t; ...@@ -60,8 +63,8 @@ typedef struct dvbpsi_psi_section_s dvbpsi_psi_section_t;
/***************************************************************************** /*****************************************************************************
* dvbpsi_callback * dvbpsi_callback
***************************************************************************** *****************************************************************************/
* Callback type definition. /*!Callback type definition.
*****************************************************************************/ *****************************************************************************/
typedef void (* dvbpsi_callback)(dvbpsi_handle p_decoder, typedef void (* dvbpsi_callback)(dvbpsi_handle p_decoder,
dvbpsi_psi_section_t* p_section); dvbpsi_psi_section_t* p_section);
...@@ -69,8 +72,8 @@ typedef void (* dvbpsi_callback)(dvbpsi_handle p_decoder, ...@@ -69,8 +72,8 @@ typedef void (* dvbpsi_callback)(dvbpsi_handle p_decoder,
/***************************************************************************** /*****************************************************************************
* dvbpsi_decoder_t * dvbpsi_decoder_t
***************************************************************************** *****************************************************************************/
* PSI decoder. /*!PSI decoder.
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_decoder_s typedef struct dvbpsi_decoder_s
{ {
......
src/psi.h
View file @ 28862128
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* psi.h: common PSI structures * psi.h: common PSI structures
*---------------------------------------------------------------------------- *----------------------------------------------------------------------------
* (c)2001-2002 VideoLAN * (c)2001-2002 VideoLAN
* $Id: psi.h,v 1.3 2002/03/15 12:16:01 bozo Exp $ * $Id: psi.h,v 1.4 2002/03/25 21:00:50 bozo Exp $
* *
* Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr> * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
* *
...@@ -34,70 +34,79 @@ extern "C" { ...@@ -34,70 +34,79 @@ extern "C" {
/***************************************************************************** /*****************************************************************************
* dvbpsi_psi_section_t * dvbpsi_psi_section_t
***************************************************************************** *****************************************************************************/
* This structure is used to store a PSI section. The common information are /*!This structure is used to store a PSI section. The common information are
* decoded (ISO/IEC 13818-1 section 2.4.4.10). * decoded (ISO/IEC 13818-1 section 2.4.4.10).
*****************************************************************************/ *****************************************************************************/
struct dvbpsi_psi_section_s struct dvbpsi_psi_section_s
{ {
/* non-specific section data */ /* non-specific section data */
uint8_t i_table_id; /* table_id */ uint8_t i_table_id; /*!< table_id */
int b_syntax_indicator; /* section_syntax_indicator */ int b_syntax_indicator; /*!< section_syntax_indicator */
int b_private_indicator; /* private_indicator */ int b_private_indicator; /*!< private_indicator */
uint16_t i_length; /* section_length */ uint16_t i_length; /*!< section_length */
/* used if b_syntax_indicator is true */ /* used if b_syntax_indicator is true */
uint16_t i_extension; /* table_id_extension */ uint16_t i_extension; /*!< table_id_extension */
/* transport_stream_id for a /*!< transport_stream_id for a
PAT section */ PAT section */
uint8_t i_version; /* version_number */ uint8_t i_version; /*!< version_number */
int b_current_next; /* current_next_indicator */ int b_current_next; /*!< current_next_indicator */
uint8_t i_number; /* section_number */ uint8_t i_number; /*!< section_number */
uint8_t i_last_number; /* last_section_number */ uint8_t i_last_number; /*!< last_section_number */
/* non-specific section data */ /* non-specific section data */
/* the content is table-specific */ /* the content is table-specific */
uint8_t * p_data; /* complete section */ uint8_t * p_data; /*!< complete section */
uint8_t * p_payload_start; /* payload start */ uint8_t * p_payload_start; /*!< payload start */
uint8_t * p_payload_end; /* payload end */ uint8_t * p_payload_end; /*!< payload end */
/* used if b_syntax_indicator is true */ /* used if b_syntax_indicator is true */
uint32_t i_crc; /* CRC_32 */ uint32_t i_crc; /*!< CRC_32 */
/* list handling */ /* list handling */
struct dvbpsi_psi_section_s * p_next; struct dvbpsi_psi_section_s * p_next; /*!< next element of
the list */
}; };
/***************************************************************************** /*****************************************************************************
* dvbpsi_NewPSISection * dvbpsi_NewPSISection
***************************************************************************** *****************************************************************************/
* Creation of a new dvbpsi_psi_section_t structure. /*!Creation of a new dvbpsi_psi_section_t structure.
* \param i_max_size max size in bytes of the section
* \return a pointer to the new PSI section structure.
*****************************************************************************/ *****************************************************************************/
dvbpsi_psi_section_t * dvbpsi_NewPSISection(int i_max_size); dvbpsi_psi_section_t * dvbpsi_NewPSISection(int i_max_size);
/***************************************************************************** /*****************************************************************************
* dvbpsi_DeletePSISections * dvbpsi_DeletePSISections
***************************************************************************** *****************************************************************************/
* Destruction of a dvbpsi_psi_section_t structure. /*!Destruction of a dvbpsi_psi_section_t structure.
* \param p_section pointer to the first PSI section structure
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_DeletePSISections(dvbpsi_psi_section_t * p_section); void dvbpsi_DeletePSISections(dvbpsi_psi_section_t * p_section);
/***************************************************************************** /*****************************************************************************
* dvbpsi_ValidPSISection * dvbpsi_ValidPSISection
***************************************************************************** *****************************************************************************/
* Check the CRC_32 if the section has b_syntax_indicator set. /*!Check the CRC_32 if the section has b_syntax_indicator set.
* \param p_section pointer to the PSI section structure
* \return boolean value (0 if the section is not valid).
*****************************************************************************/ *****************************************************************************/
int dvbpsi_ValidPSISection(dvbpsi_psi_section_t* p_section); int dvbpsi_ValidPSISection(dvbpsi_psi_section_t* p_section);
/***************************************************************************** /*****************************************************************************
* dvbpsi_BuildPSISection * dvbpsi_BuildPSISection
***************************************************************************** *****************************************************************************/
* Build the section based on the information in the structure. /*!Build the section based on the information in the structure.
* \param p_section pointer to the PSI section structure
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_BuildPSISection(dvbpsi_psi_section_t* p_section); void dvbpsi_BuildPSISection(dvbpsi_psi_section_t* p_section);
......
src/tables/pat.h
View file @ 28862128
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* pat.h: PAT structures * pat.h: PAT structures
*---------------------------------------------------------------------------- *----------------------------------------------------------------------------
* (c)2001-2002 VideoLAN * (c)2001-2002 VideoLAN
* $Id: pat.h,v 1.2 2002/03/15 12:16:01 bozo Exp $ * $Id: pat.h,v 1.3 2002/03/25 21:00:50 bozo Exp $
* *
* Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr> * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
* *
...@@ -34,49 +34,53 @@ extern "C" { ...@@ -34,49 +34,53 @@ extern "C" {
/***************************************************************************** /*****************************************************************************
* dvbpsi_pat_program_t * dvbpsi_pat_program_t
***************************************************************************** *****************************************************************************/
* This structure is used to store a decoded PAT program. /*!This structure is used to store a decoded PAT program.
* (ISO/IEC 13818-1 section 2.4.4.3). * (ISO/IEC 13818-1 section 2.4.4.3).
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_pat_program_s typedef struct dvbpsi_pat_program_s
{ {
uint16_t i_number; /* program_number */ uint16_t i_number; /*!< program_number */
uint16_t i_pid; /* PID of NIT/PMT */ uint16_t i_pid; /*!< PID of NIT/PMT */
struct dvbpsi_pat_program_s * p_next; struct dvbpsi_pat_program_s * p_next; /*!< next element of
the list */
} dvbpsi_pat_program_t; } dvbpsi_pat_program_t;
/***************************************************************************** /*****************************************************************************
* dvbpsi_pat_t * dvbpsi_pat_t
***************************************************************************** *****************************************************************************/
* This structure is used to store a decoded PAT. /*!This structure is used to store a decoded PAT.
* (ISO/IEC 13818-1 section 2.4.4.3). * (ISO/IEC 13818-1 section 2.4.4.3).
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_pat_s typedef struct dvbpsi_pat_s
{ {
uint16_t i_ts_id; /* transport_stream_id */ uint16_t i_ts_id; /*!< transport_stream_id */
uint8_t i_version; /* version_number */ uint8_t i_version; /*!< version_number */
int b_current_next; /* current_next_indicator */ int b_current_next; /*!< current_next_indicator */
dvbpsi_pat_program_t * p_first_program; /* program list */ dvbpsi_pat_program_t * p_first_program; /*!< program list */
} dvbpsi_pat_t; } dvbpsi_pat_t;
/***************************************************************************** /*****************************************************************************
* dvbpsi_pat_callback * dvbpsi_pat_callback
***************************************************************************** *****************************************************************************/
* Callback type definition. /*!Callback type definition.
*****************************************************************************/ *****************************************************************************/
typedef void (* dvbpsi_pat_callback)(void* p_cb_data, dvbpsi_pat_t* p_new_pat); typedef void (* dvbpsi_pat_callback)(void* p_cb_data, dvbpsi_pat_t* p_new_pat);
/***************************************************************************** /*****************************************************************************
* dvbpsi_AttachPAT * dvbpsi_AttachPAT
***************************************************************************** *****************************************************************************/
* Initialize a PAT decoder and return a handle on it. /*!Initialize a PAT decoder and return a handle on it.
* \param pf_callback function to call back on new PAT
* \param p_cb_data private data given in argument to the callback
* \return a pointer to the decoder for future calls.
*****************************************************************************/ *****************************************************************************/
dvbpsi_handle dvbpsi_AttachPAT(dvbpsi_pat_callback pf_callback, dvbpsi_handle dvbpsi_AttachPAT(dvbpsi_pat_callback pf_callback,
void* p_cb_data); void* p_cb_data);
...@@ -84,20 +88,34 @@ dvbpsi_handle dvbpsi_AttachPAT(dvbpsi_pat_callback pf_callback, ...@@ -84,20 +88,34 @@ dvbpsi_handle dvbpsi_AttachPAT(dvbpsi_pat_callback pf_callback,
/***************************************************************************** /*****************************************************************************
* dvbpsi_DetachPAT * dvbpsi_DetachPAT
***************************************************************************** *****************************************************************************/
* Close a PAT decoder. The handle isn't valid any more. /*!Close a PAT decoder. The handle isn't valid any more.
* \param h_dvbpsi handle to the decoder
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_DetachPAT(dvbpsi_handle h_dvbpsi); void dvbpsi_DetachPAT(dvbpsi_handle h_dvbpsi);
/***************************************************************************** /*****************************************************************************
* dvbpsi_InitPAT/dvbpsi_NewPAT * dvbpsi_InitPAT/dvbpsi_NewPAT
***************************************************************************** *****************************************************************************/
* Initialize a pre-allocated/new dvbpsi_pat_t structure. /*!Initialize a user-allocated dvbpsi_pat_t structure.
* \param p_pat PAT structure
* \param i_ts_id transport stream ID
* \param i_version PAT version
* \param b_current_next current next indicator
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_InitPAT(dvbpsi_pat_t* p_pat, uint16_t i_ts_id, uint8_t i_version, void dvbpsi_InitPAT(dvbpsi_pat_t* p_pat, uint16_t i_ts_id, uint8_t i_version,
int b_current_next); int b_current_next);
/*!Allocate and initialize a new dvbpsi_pat_t structure.
* \param p_pat PAT structure
* \param i_ts_id transport stream ID
* \param i_version PAT version
* \param b_current_next current next indicator
* \return nothing.
*****************************************************************************/
#define dvbpsi_NewPAT(p_pat, i_ts_id, i_version, b_current_next) \ #define dvbpsi_NewPAT(p_pat, i_ts_id, i_version, b_current_next) \
p_pat = (dvbpsi_pat_t*)malloc(sizeof(dvbpsi_pat_t)); \ p_pat = (dvbpsi_pat_t*)malloc(sizeof(dvbpsi_pat_t)); \
if(p_pat != NULL) \ if(p_pat != NULL) \
...@@ -106,11 +124,17 @@ void dvbpsi_InitPAT(dvbpsi_pat_t* p_pat, uint16_t i_ts_id, uint8_t i_version, ...@@ -106,11 +124,17 @@ void dvbpsi_InitPAT(dvbpsi_pat_t* p_pat, uint16_t i_ts_id, uint8_t i_version,
/***************************************************************************** /*****************************************************************************
* dvbpsi_EmptyPAT/dvbpsi_DeletePAT * dvbpsi_EmptyPAT/dvbpsi_DeletePAT
***************************************************************************** *****************************************************************************/
* Clean/free a dvbpsi_pat_t structure. /*!Clean a dvbpsi_pat_t structure.
* \param p_pat PAT structure
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_EmptyPAT(dvbpsi_pat_t* p_pat); void dvbpsi_EmptyPAT(dvbpsi_pat_t* p_pat);
/*!Clean and free a dvbpsi_pat_t structure.
* \param p_pat PAT structure
* \return nothing.
*****************************************************************************/
#define dvbpsi_DeletePAT(p_pat) \ #define dvbpsi_DeletePAT(p_pat) \
dvbpsi_EmptyPAT(p_pat); \ dvbpsi_EmptyPAT(p_pat); \
free(p_pat); free(p_pat);
...@@ -118,18 +142,24 @@ void dvbpsi_EmptyPAT(dvbpsi_pat_t* p_pat); ...@@ -118,18 +142,24 @@ void dvbpsi_EmptyPAT(dvbpsi_pat_t* p_pat);
/***************************************************************************** /*****************************************************************************
* dvbpsi_PATAddProgram * dvbpsi_PATAddProgram
***************************************************************************** *****************************************************************************/
* Add a program at the end of the PAT. /*!Add a program at the end of the PAT.
* \param p_pat PAT structure
* \param i_number program number
* \param i_pid PID of the NIT/PMT
* \return a pointer to the added program.
*****************************************************************************/ *****************************************************************************/
dvbpsi_pat_program_t* dvbpsi_PATAddProgram(dvbpsi_pat_t* p_pat, dvbpsi_pat_program_t* dvbpsi_PATAddProgram(dvbpsi_pat_t* p_pat,
uint16_t i_number, uint16_t i_pid); uint16_t i_number, uint16_t i_pid);
/***************************************************************************** /*****************************************************************************
* dvbpsi_GenPATSections * dvbpsi_GenPATSections
***************************************************************************** *****************************************************************************/
* Generate PAT sections based on the dvbpsi_pat_t structure. The third /*!Generate PAT sections based on the dvbpsi_pat_t structure.
* argument is used to limit the number of program in each section (max: 253). * \param p_pat PAT structure
* \param i_max_pps limitation of the number of program in each section
* (max: 253).
* \return a pointer to the list of generated PSI sections.
*****************************************************************************/ *****************************************************************************/
dvbpsi_psi_section_t* dvbpsi_GenPATSections(dvbpsi_pat_t* p_pat, dvbpsi_psi_section_t* dvbpsi_GenPATSections(dvbpsi_pat_t* p_pat,
int i_max_pps); int i_max_pps);
......
src/tables/pmt.h
View file @ 28862128
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* pmt.h: PMT structures * pmt.h: PMT structures
*---------------------------------------------------------------------------- *----------------------------------------------------------------------------
* (c)2001-2002 VideoLAN * (c)2001-2002 VideoLAN
* $Id: pmt.h,v 1.3 2002/03/18 23:53:39 bozo Exp $ * $Id: pmt.h,v 1.4 2002/03/25 21:00:50 bozo Exp $
* *
* Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr> * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
* *
...@@ -34,55 +34,60 @@ extern "C" { ...@@ -34,55 +34,60 @@ extern "C" {
/***************************************************************************** /*****************************************************************************
* dvbpsi_pmt_es_t * dvbpsi_pmt_es_t
***************************************************************************** *****************************************************************************/
* This structure is used to store a decoded ES description. /*!This structure is used to store a decoded ES description.
* (ISO/IEC 13818-1 section 2.4.4.8). * (ISO/IEC 13818-1 section 2.4.4.8).
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_pmt_es_s typedef struct dvbpsi_pmt_es_s
{ {
uint8_t i_type; /* stream_type */ uint8_t i_type; /*!< stream_type */
uint16_t i_pid; /* elementary_PID */ uint16_t i_pid; /*!< elementary_PID */
dvbpsi_descriptor_t * p_first_descriptor; /* descriptor list */ dvbpsi_descriptor_t * p_first_descriptor; /*!< descriptor list */
struct dvbpsi_pmt_es_s * p_next; struct dvbpsi_pmt_es_s * p_next; /*!< next element of
the list */
} dvbpsi_pmt_es_t; } dvbpsi_pmt_es_t;
/***************************************************************************** /*****************************************************************************
* dvbpsi_pmt_t * dvbpsi_pmt_t
***************************************************************************** *****************************************************************************/
* This structure is used to store a decoded PMT. /*!This structure is used to store a decoded PMT.
* (ISO/IEC 13818-1 section 2.4.4.8). * (ISO/IEC 13818-1 section 2.4.4.8).
*****************************************************************************/ *****************************************************************************/
typedef struct dvbpsi_pmt_s typedef struct dvbpsi_pmt_s
{ {
uint16_t i_program_number; /* program_number */ uint16_t i_program_number; /*!< program_number */
uint8_t i_version; /* version_number */ uint8_t i_version; /*!< version_number */
int b_current_next; /* current_next_indicator */ int b_current_next; /*!< current_next_indicator */
uint16_t i_pcr_pid; /* PCR_PID */ uint16_t i_pcr_pid; /*!< PCR_PID */
dvbpsi_descriptor_t * p_first_descriptor; /* descriptor list */ dvbpsi_descriptor_t * p_first_descriptor; /*!< descriptor list */
dvbpsi_pmt_es_t * p_first_es; /* ES list */ dvbpsi_pmt_es_t * p_first_es; /*!< ES list */
} dvbpsi_pmt_t; } dvbpsi_pmt_t;
/***************************************************************************** /*****************************************************************************
* dvbpsi_pmt_callback * dvbpsi_pmt_callback
***************************************************************************** *****************************************************************************/
* Callback type definition. /*!Callback type definition.
*****************************************************************************/ *****************************************************************************/
typedef void (* dvbpsi_pmt_callback)(void* p_cb_data, dvbpsi_pmt_t* p_new_pmt); typedef void (* dvbpsi_pmt_callback)(void* p_cb_data, dvbpsi_pmt_t* p_new_pmt);
/***************************************************************************** /*****************************************************************************
* dvbpsi_AttachPMT * dvbpsi_AttachPMT
***************************************************************************** *****************************************************************************/
* Initialize a PMT decoder and return a handle on it. /*!Initialize a PMT decoder and return a handle on it.
* \param i_program_number program number
* \param pf_callback function to call back on new PMT
* \param p_cb_data private data given in argument to the callback
* \return a pointer to the decoder for future calls.
*****************************************************************************/ *****************************************************************************/
dvbpsi_handle dvbpsi_AttachPMT(uint16_t i_program_number, dvbpsi_handle dvbpsi_AttachPMT(uint16_t i_program_number,
dvbpsi_pmt_callback pf_callback, dvbpsi_pmt_callback pf_callback,
...@@ -91,20 +96,36 @@ dvbpsi_handle dvbpsi_AttachPMT(uint16_t i_program_number, ...@@ -91,20 +96,36 @@ dvbpsi_handle dvbpsi_AttachPMT(uint16_t i_program_number,
/***************************************************************************** /*****************************************************************************
* dvbpsi_DetachPMT * dvbpsi_DetachPMT
***************************************************************************** *****************************************************************************/
* Close a PMT decoder. The handle isn't valid any more. /*!Close a PMT decoder. The handle isn't valid any more.
* \param h_dvbpsi handle to the decoder
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_DetachPMT(dvbpsi_handle h_dvbpsi); void dvbpsi_DetachPMT(dvbpsi_handle h_dvbpsi);
/***************************************************************************** /*****************************************************************************
* dvbpsi_InitPMT/dvbpsi_NewPMT * dvbpsi_InitPMT/dvbpsi_NewPMT
***************************************************************************** *****************************************************************************/
* Initialize a pre-allocated/new dvbpsi_pmt_t structure. /*!Initialize a user-allocated dvbpsi_pmt_t structure.
* \param p_pmt PMT structure
* \param i_program_number program number
* \param i_version PMT version
* \param b_current_next current next indicator
* \param i_pcr_pid PCR_PID
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_InitPMT(dvbpsi_pmt_t* p_pmt, uint16_t i_program_number, void dvbpsi_InitPMT(dvbpsi_pmt_t* p_pmt, uint16_t i_program_number,
uint8_t i_version, int b_current_next, uint16_t i_pcr_pid); uint8_t i_version, int b_current_next, uint16_t i_pcr_pid);
/*!Allocate and initialize a new dvbpsi_pmt_t structure.
* \param p_pmt PMT structure
* \param i_program_number program number
* \param i_version PMT version
* \param b_current_next current next indicator
* \param i_pcr_pid PCR_PID
* \return nothing.
*****************************************************************************/
#define dvbpsi_NewPMT(p_pmt, i_program_number, \ #define dvbpsi_NewPMT(p_pmt, i_program_number, \
i_version, b_current_next, i_pcr_pid) \ i_version, b_current_next, i_pcr_pid) \
p_pmt = (dvbpsi_pmt_t*)malloc(sizeof(dvbpsi_pmt_t)); \ p_pmt = (dvbpsi_pmt_t*)malloc(sizeof(dvbpsi_pmt_t)); \
...@@ -115,11 +136,17 @@ void dvbpsi_InitPMT(dvbpsi_pmt_t* p_pmt, uint16_t i_program_number, ...@@ -115,11 +136,17 @@ void dvbpsi_InitPMT(dvbpsi_pmt_t* p_pmt, uint16_t i_program_number,
/***************************************************************************** /*****************************************************************************
* dvbpsi_EmptyPMT/dvbpsi_DeletePMT * dvbpsi_EmptyPMT/dvbpsi_DeletePMT
***************************************************************************** *****************************************************************************/
* Clean/free a dvbpsi_pmt_t structure. /*!Clean a dvbpsi_pmt_t structure.
* \param p_pmt PMT structure
* \return nothing.
*****************************************************************************/ *****************************************************************************/
void dvbpsi_EmptyPMT(dvbpsi_pmt_t* p_pmt); void dvbpsi_EmptyPMT(dvbpsi_pmt_t* p_pmt);
/*!Clean and free a dvbpsi_pmt_t structure.
* \param p_pmt PMT structure
* \return nothing.
*****************************************************************************/
#define dvbpsi_DeletePMT(p_pmt) \ #define dvbpsi_DeletePMT(p_pmt) \
dvbpsi_EmptyPMT(p_pmt); \ dvbpsi_EmptyPMT(p_pmt); \
free(p_pmt); free(p_pmt);
...@@ -127,8 +154,13 @@ void dvbpsi_EmptyPMT(dvbpsi_pmt_t* p_pmt); ...@@ -127,8 +154,13 @@ void dvbpsi_EmptyPMT(dvbpsi_pmt_t* p_pmt);
/***************************************************************************** /*****************************************************************************
* dvbpsi_PMTAddDescriptor * dvbpsi_PMTAddDescriptor
***************************************************************************** *****************************************************************************/
* Add a descriptor in the PMT. /*!Add a descriptor in the PMT.
* \param p_pmt PMT structure
* \param i_tag descriptor's tag
* \param i_length descriptor's length
* \param p_data descriptor's data
* \return a pointer to the added descriptor.
*****************************************************************************/ *****************************************************************************/
dvbpsi_descriptor_t* dvbpsi_PMTAddDescriptor(dvbpsi_pmt_t* p_pmt, dvbpsi_descriptor_t* dvbpsi_PMTAddDescriptor(dvbpsi_pmt_t* p_pmt,
uint8_t i_tag, uint8_t i_length, uint8_t i_tag, uint8_t i_length,
...@@ -137,8 +169,12 @@ dvbpsi_descriptor_t* dvbpsi_PMTAddDescriptor(dvbpsi_pmt_t* p_pmt, ...@@ -137,8 +169,12 @@ dvbpsi_descriptor_t* dvbpsi_PMTAddDescriptor(dvbpsi_pmt_t* p_pmt,
/***************************************************************************** /*****************************************************************************
* dvbpsi_PMTAddES * dvbpsi_PMTAddES
***************************************************************************** *****************************************************************************/
* Add an ES in the PMT. /*!Add an ES in the PMT.
* \param p_pmt PMT structure
* \param i_type type of ES
* \param i_pid PID of the ES
* \return a pointer to the added ES.
*****************************************************************************/ *****************************************************************************/
dvbpsi_pmt_es_t* dvbpsi_PMTAddES(dvbpsi_pmt_t* p_pmt, dvbpsi_pmt_es_t* dvbpsi_PMTAddES(dvbpsi_pmt_t* p_pmt,
uint8_t i_type, uint16_t i_pid); uint8_t i_type, uint16_t i_pid);
...@@ -146,8 +182,13 @@ dvbpsi_pmt_es_t* dvbpsi_PMTAddES(dvbpsi_pmt_t* p_pmt, ...@@ -146,8 +182,13 @@ dvbpsi_pmt_es_t* dvbpsi_PMTAddES(dvbpsi_pmt_t* p_pmt,
/***************************************************************************** /*****************************************************************************
* dvbpsi_PMTESAddDescriptor * dvbpsi_PMTESAddDescriptor
***************************************************************************** *****************************************************************************/
* Add a descriptor in the PMT ES. /*!Add a descriptor in the PMT ES.
* \param p_es ES structure
* \param i_tag descriptor's tag
* \param i_length descriptor's length
* \param p_data descriptor's data
* \return a pointer to the added descriptor.
*****************************************************************************/ *****************************************************************************/
dvbpsi_descriptor_t* dvbpsi_PMTESAddDescriptor(dvbpsi_pmt_es_t* p_es, dvbpsi_descriptor_t* dvbpsi_PMTESAddDescriptor(dvbpsi_pmt_es_t* p_es,
uint8_t i_tag, uint8_t i_length, uint8_t i_tag, uint8_t i_length,
...@@ -156,8 +197,10 @@ dvbpsi_descriptor_t* dvbpsi_PMTESAddDescriptor(dvbpsi_pmt_es_t* p_es, ...@@ -156,8 +197,10 @@ dvbpsi_descriptor_t* dvbpsi_PMTESAddDescriptor(dvbpsi_pmt_es_t* p_es,
/***************************************************************************** /*****************************************************************************
* dvbpsi_GenPMTSections * dvbpsi_GenPMTSections
***************************************************************************** *****************************************************************************/
* Generate PMT sections based on the dvbpsi_pmt_t structure. /*!Generate PMT sections based on the dvbpsi_pmt_t structure.
* \param p_pmt PMT structure
* \return a pointer to the list of generated PSI sections.
*****************************************************************************/ *****************************************************************************/
dvbpsi_psi_section_t* dvbpsi_GenPMTSections(dvbpsi_pmt_t* p_pmt); dvbpsi_psi_section_t* dvbpsi_GenPMTSections(dvbpsi_pmt_t* p_pmt);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment