Skip to content

L
linux-davinci
Commit ff243070 authored by Ladislav Michl's avatar Ladislav Michl Committed by Tony Lindgren
Browse files
Options

[PATCH] ARM: OMAP: Remove support for board Netstar 

Remove support for board Netstar. I hope it helped to sort out various
needs to drivers and now when nearly everything was converted to
platform device there is no more need to bother you with updates to
board file :-). I'll maintain it as separate patch (using PTXdist).
Thanks for all the fish :-)
parent a5d84d4a
Show whitespace changes
Inline Side-by-side
Showing with 4 additions and 194 deletions
arch/arm/mach-omap1/Kconfig
View file @ ff243070
......@@ -69,12 +69,6 @@ config MACH_VOICEBLUE
Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
such a board.
config MACH_NETSTAR
bool "NetStar"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
Support for NetStar PBX. Say Y here if you have such a board.
config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
......
arch/arm/mach-omap1/Makefile
View file @ ff243070
......@@ -20,7 +20,6 @@ obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
ifeq ($(CONFIG_ARCH_OMAP15XX),y)
......
arch/arm/mach-omap1/board-netstar.c deleted 100644 → 0
View file @ a5d84d4a
/*
* Modified from board-generic.c
*
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
*
* Code for Netstar OMAP board.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/common.h>
extern void __init omap_init_time(void);
extern int omap_gpio_init(void);
static struct resource netstar_smc91x_resources[] = {
[0] = {
.start = OMAP_CS1_PHYS + 0x300,
.end = OMAP_CS1_PHYS + 0x300 + 16,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netstar_smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(netstar_smc91x_resources),
.resource = netstar_smc91x_resources,
};
static struct platform_device *netstar_devices[] __initdata = {
&netstar_smc91x_device,
};
static struct omap_uart_config netstar_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel netstar_config[] = {
{ OMAP_TAG_UART, &netstar_uart_config },
};
static void __init netstar_init_irq(void)
{
omap_init_irq();
omap_gpio_init();
}
static void __init netstar_init(void)
{
/* green LED */
omap_request_gpio(4);
omap_set_gpio_direction(4, 0);
/* smc91x reset */
omap_request_gpio(7);
omap_set_gpio_direction(7, 0);
omap_set_gpio_dataout(7, 1);
udelay(2); /* wait at least 100ns */
omap_set_gpio_dataout(7, 0);
mdelay(50); /* 50ms until PHY ready */
/* smc91x interrupt pin */
omap_request_gpio(8);
omap_request_gpio(12);
omap_request_gpio(13);
omap_request_gpio(14);
omap_request_gpio(15);
set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING);
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING);
set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING);
set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING);
platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices));
/* Switch on green LED */
omap_set_gpio_dataout(4, 0);
/* Switch off red LED */
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
omap_writeb(0x80, OMAP_LPG1_LCR);
omap_board_config = netstar_config;
omap_board_config_size = ARRAY_SIZE(netstar_config);
omap_serial_init();
}
static void __init netstar_map_io(void)
{
omap_map_common_io();
}
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
static unsigned long machine_state;
static int panic_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
if (test_and_set_bit(MACHINE_PANICED, &machine_state))
return NOTIFY_DONE;
/* Switch off green LED */
omap_set_gpio_dataout(4, 1);
/* Flash red LED */
omap_writeb(0x78, OMAP_LPG1_LCR);
omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
return NOTIFY_DONE;
}
static struct notifier_block panic_block = {
.notifier_call = panic_event,
};
static int __init netstar_late_init(void)
{
/* TODO: Setup front panel switch here */
/* Setup panic notifier */
notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
postcore_initcall(netstar_late_init);
MACHINE_START(NETSTAR, "NetStar OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
.phys_ram = 0x10000000,
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = netstar_map_io,
.init_irq = netstar_init_irq,
.init_machine = netstar_init,
.timer = &omap_timer,
MACHINE_END
drivers/mtd/nand/Kconfig
View file @ ff243070
......@@ -50,10 +50,10 @@ config MTD_NAND_SPIA
If you had to ask, you don't have one. Say 'N'.
config MTD_NAND_OMAP
tristate "NAND Flash device on OMAP H3/H2/P2 or NETSTAR boards"
depends on ARM && ARCH_OMAP1 && MTD_NAND && (MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_NETSTAR || MACH_OMAP_PERSEUS2)
tristate "NAND Flash device on OMAP H3/H2/P2 boards"
depends on ARM && ARCH_OMAP1 && MTD_NAND && (MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_PERSEUS2)
help
Support for NAND flash on Texas Instruments H3/H2/P2/NETSTAR platforms.
Support for NAND flash on Texas Instruments H3/H2/P2 platforms.
config MTD_NAND_TOTO
tristate "NAND Flash device on TOTO board"
......
include/asm-arm/arch-omap/board-netstar.h deleted 100644 → 0
View file @ a5d84d4a
/*
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
*
* Hardware definitions for OMAP5910 based NetStar board.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_NETSTAR_H
#define __ASM_ARCH_NETSTAR_H
#include <asm/arch/tc.h>
#define OMAP_NAND_FLASH_START1 OMAP_CS1_PHYS + (1 << 23)
#define OMAP_NAND_FLASH_START2 OMAP_CS1_PHYS + (2 << 23)
#endif /* __ASM_ARCH_NETSTAR_H */
include/asm-arm/arch-omap/hardware.h
View file @ ff243070
......@@ -314,10 +314,6 @@
#include "board-voiceblue.h"
#endif
#ifdef CONFIG_MACH_NETSTAR
#include "board-netstar.h"
#endif
#endif /* !__ASSEMBLER__ */
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment