Skip to content

L
linux-davinci
Commit f0ede3f3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume
  ACPI: add DMI entry for SCI_EN resume quirk on HP dv4
  thermal: sysfs-api.txt - document passive attribute for thermal zones
  thermal: sysfs-api.txt - reformat for improved readability
  acpi: thermal: Add EOL to the trip_point_N_type strings
  ACPI: Move dereference after NULL test
  ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."
  ACPI: add __cpuinit to acpi_processor_add()
  acpi-power-meter: Don't leak ACPI error codes to userspace
  eeepc-laptop: don't enable camera at startup if it's already on.
  Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated"
  ACPI: clean up video.c boundary checks and types
parents 7c9abfb8 43758dd8
Hide whitespace changes
Inline Side-by-side
Showing with 281 additions and 235 deletions
Documentation/thermal/sysfs-api.txt
View file @ f0ede3f3
Generic Thermal Sysfs driver How To
=========================
===================================
Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
......@@ -10,20 +10,20 @@ Copyright (c) 2008 Intel Corporation
0. Introduction
The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
and thermal cooling devices (fan, processor...) to register with the thermal management
solution and to be a part of it.
The generic thermal sysfs provides a set of interfaces for thermal zone
devices (sensors) and thermal cooling devices (fan, processor...) to register
with the thermal management solution and to be a part of it.
This how-to focuses on enabling new thermal zone and cooling devices to participate
in thermal management.
This solution is platform independent and any type of thermal zone devices and
cooling devices should be able to make use of the infrastructure.
This how-to focuses on enabling new thermal zone and cooling devices to
participate in thermal management.
This solution is platform independent and any type of thermal zone devices
and cooling devices should be able to make use of the infrastructure.
The main task of the thermal sysfs driver is to expose thermal zone attributes as well
as cooling device attributes to the user space.
An intelligent thermal management application can make decisions based on inputs
from thermal zone attributes (the current temperature and trip point temperature)
and throttle appropriate devices.
The main task of the thermal sysfs driver is to expose thermal zone attributes
as well as cooling device attributes to the user space.
An intelligent thermal management application can make decisions based on
inputs from thermal zone attributes (the current temperature and trip point
temperature) and throttle appropriate devices.
[0-*] denotes any positive number starting from 0
[1-*] denotes any positive number starting from 1
......@@ -31,77 +31,77 @@ and throttle appropriate devices.
1. thermal sysfs driver interface functions
1.1 thermal zone device interface
1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
void *devdata, struct thermal_zone_device_ops *ops)
This interface function adds a new thermal zone device (sensor) to
/sys/class/thermal folder as thermal_zone[0-*].
It tries to bind all the thermal cooling devices registered at the same time.
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
devdata: device private data
ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
.get_mode: get the current mode (user/kernel) of the thermal zone.
"kernel" means thermal management is done in kernel.
"user" will prevent kernel thermal driver actions upon trip points
so that user applications can take charge of thermal management.
.set_mode: set the mode (user/kernel) of the thermal zone.
.get_trip_type: get the type of certain trip point.
.get_trip_temp: get the temperature above which the certain trip point
will be fired.
1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
int trips, void *devdata, struct thermal_zone_device_ops *ops)
This interface function adds a new thermal zone device (sensor) to
/sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
thermal cooling devices registered at the same time.
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
devdata: device private data
ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
.get_mode: get the current mode (user/kernel) of the thermal zone.
- "kernel" means thermal management is done in kernel.
- "user" will prevent kernel thermal driver actions upon trip points
so that user applications can take charge of thermal management.
.set_mode: set the mode (user/kernel) of the thermal zone.
.get_trip_type: get the type of certain trip point.
.get_trip_temp: get the temperature above which the certain trip point
will be fired.
1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
This interface function removes the thermal zone device.
It deletes the corresponding entry form /sys/class/thermal folder and unbind all
the thermal cooling devices it uses.
This interface function removes the thermal zone device.
It deletes the corresponding entry form /sys/class/thermal folder and
unbind all the thermal cooling devices it uses.
1.2 thermal cooling device interface
1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
void *devdata, struct thermal_cooling_device_ops *)
This interface function adds a new thermal cooling device (fan/processor/...) to
/sys/class/thermal/ folder as cooling_device[0-*].
It tries to bind itself to all the thermal zone devices register at the same time.
name: the cooling device name.
devdata: device private data.
ops: thermal cooling devices call-backs.
.get_max_state: get the Maximum throttle state of the cooling device.
.get_cur_state: get the Current throttle state of the cooling device.
.set_cur_state: set the Current throttle state of the cooling device.
void *devdata, struct thermal_cooling_device_ops *)
This interface function adds a new thermal cooling device (fan/processor/...)
to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
to all the thermal zone devices register at the same time.
name: the cooling device name.
devdata: device private data.
ops: thermal cooling devices call-backs.
.get_max_state: get the Maximum throttle state of the cooling device.
.get_cur_state: get the Current throttle state of the cooling device.
.set_cur_state: set the Current throttle state of the cooling device.
1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
This interface function remove the thermal cooling device.
It deletes the corresponding entry form /sys/class/thermal folder and unbind
itself from all the thermal zone devices using it.
This interface function remove the thermal cooling device.
It deletes the corresponding entry form /sys/class/thermal folder and
unbind itself from all the thermal zone devices using it.
1.3 interface for binding a thermal zone device with a thermal cooling device
1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip, struct thermal_cooling_device *cdev);
int trip, struct thermal_cooling_device *cdev);
This interface function bind a thermal cooling device to the certain trip point
of a thermal zone device.
This function is usually called in the thermal zone device .bind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
This interface function bind a thermal cooling device to the certain trip
point of a thermal zone device.
This function is usually called in the thermal zone device .bind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
int trip, struct thermal_cooling_device *cdev);
int trip, struct thermal_cooling_device *cdev);
This interface function unbind a thermal cooling device from the certain trip point
of a thermal zone device.
This function is usually called in the thermal zone device .unbind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
This interface function unbind a thermal cooling device from the certain
trip point of a thermal zone device. This function is usually called in
the thermal zone device .unbind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
2. sysfs attributes structure
......@@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module.
Thermal zone device sys I/F, created once it's registered:
/sys/class/thermal/thermal_zone[0-*]:
|-----type: Type of the thermal zone
|-----temp: Current temperature
|-----mode: Working mode of the thermal zone
|-----trip_point_[0-*]_temp: Trip point temperature
|-----trip_point_[0-*]_type: Trip point type
|---type: Type of the thermal zone
|---temp: Current temperature
|---mode: Working mode of the thermal zone
|---trip_point_[0-*]_temp: Trip point temperature
|---trip_point_[0-*]_type: Trip point type
Thermal cooling device sys I/F, created once it's registered:
/sys/class/thermal/cooling_device[0-*]:
|-----type : Type of the cooling device(processor/fan/...)
|-----max_state: Maximum cooling state of the cooling device
|-----cur_state: Current cooling state of the cooling device
|---type: Type of the cooling device(processor/fan/...)
|---max_state: Maximum cooling state of the cooling device
|---cur_state: Current cooling state of the cooling device
These two dynamic attributes are created/removed in pairs.
They represent the relationship between a thermal zone and its associated cooling device.
They are created/removed for each
thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
Then next two dynamic attributes are created/removed in pairs. They represent
the relationship between a thermal zone and its associated cooling device.
They are created/removed for each successful execution of
thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
/sys/class/thermal/thermal_zone[0-*]
|-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone
|-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
/sys/class/thermal/thermal_zone[0-*]:
|---cdev[0-*]: [0-*]th cooling device in current thermal zone
|---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
thermal zone device. E.g. the generic thermal driver registers one hwmon class device
and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
the generic thermal driver also creates a hwmon sysfs I/F for each _type_
of thermal zone device. E.g. the generic thermal driver registers one hwmon
class device and build the associated hwmon sysfs I/F for all the registered
ACPI thermal zones.
/sys/class/hwmon/hwmon[0-*]:
|-----name: The type of the thermal zone devices.
|-----temp[1-*]_input: The current temperature of thermal zone [1-*].
|-----temp[1-*]_critical: The critical trip point of thermal zone [1-*].
|---name: The type of the thermal zone devices
|---temp[1-*]_input: The current temperature of thermal zone [1-*]
|---temp[1-*]_critical: The critical trip point of thermal zone [1-*]
Please read Documentation/hwmon/sysfs-interface for additional information.
***************************
* Thermal zone attributes *
***************************
type Strings which represent the thermal zone type.
This is given by thermal zone driver as part of registration.
Eg: "acpitz" indicates it's an ACPI thermal device.
In order to keep it consistent with hwmon sys attribute,
this should be a short, lowercase string,
not containing spaces nor dashes.
RO
Required
temp Current temperature as reported by thermal zone (sensor)
Unit: millidegree Celsius
RO
Required
mode One of the predefined values in [kernel, user]
This file gives information about the algorithm
that is currently managing the thermal zone.
It can be either default kernel based algorithm
or user space application.
RW
Optional
kernel = Thermal management in kernel thermal zone driver.
user = Preventing kernel thermal zone driver actions upon
trip points so that user application can take full
charge of the thermal management.
trip_point_[0-*]_temp The temperature above which trip point will be fired
Unit: millidegree Celsius
RO
Optional
trip_point_[0-*]_type Strings which indicate the type of the trip point
E.g. it can be one of critical, hot, passive,
active[0-*] for ACPI thermal zone.
RO
Optional
cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F
for cooling device throttling control represents.
RO
Optional
cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone
-1 means the cooling device is not associated with any trip point.
RO
Optional
******************************
* Cooling device attributes *
******************************
type String which represents the type of device
eg: For generic ACPI: this should be "Fan",
"Processor" or "LCD"
eg. For memory controller device on intel_menlow platform:
this should be "Memory controller"
RO
Required
max_state The maximum permissible cooling state of this cooling device.
RO
Required
cur_state The current cooling state of this cooling device.
the value can any integer numbers between 0 and max_state,
cur_state == 0 means no cooling
cur_state == max_state means the maximum cooling.
RW
Required
type
Strings which represent the thermal zone type.
This is given by thermal zone driver as part of registration.
E.g: "acpitz" indicates it's an ACPI thermal device.
In order to keep it consistent with hwmon sys attribute; this should
be a short, lowercase string, not containing spaces nor dashes.
RO, Required
temp
Current temperature as reported by thermal zone (sensor).
Unit: millidegree Celsius
RO, Required
mode
One of the predefined values in [kernel, user].
This file gives information about the algorithm that is currently
managing the thermal zone. It can be either default kernel based
algorithm or user space application.
kernel = Thermal management in kernel thermal zone driver.
user = Preventing kernel thermal zone driver actions upon
trip points so that user application can take full
charge of the thermal management.
RW, Optional
trip_point_[0-*]_temp
The temperature above which trip point will be fired.
Unit: millidegree Celsius
RO, Optional
trip_point_[0-*]_type
Strings which indicate the type of the trip point.
E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
thermal zone.
RO, Optional
cdev[0-*]
Sysfs link to the thermal cooling device node where the sys I/F
for cooling device throttling control represents.
RO, Optional
cdev[0-*]_trip_point
The trip point with which cdev[0-*] is associated in this thermal
zone; -1 means the cooling device is not associated with any trip
point.
RO, Optional
passive
Attribute is only present for zones in which the passive cooling
policy is not supported by native thermal driver. Default is zero
and can be set to a temperature (in millidegrees) to enable a
passive trip point for the zone. Activation is done by polling with
an interval of 1 second.
Unit: millidegrees Celsius
RW, Optional
*****************************
* Cooling device attributes *
*****************************
type
String which represents the type of device, e.g:
- for generic ACPI: should be "Fan", "Processor" or "LCD"
- for memory controller device on intel_menlow platform:
should be "Memory controller".
RO, Required
max_state
The maximum permissible cooling state of this cooling device.
RO, Required
cur_state
The current cooling state of this cooling device.
The value can any integer numbers between 0 and max_state:
- cur_state == 0 means no cooling
- cur_state == max_state means the maximum cooling.
RW, Required
3. A simple implementation
ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
It has one processor and one fan, which are both registered as thermal_cooling_device.
If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
the sys I/F structure will be built like this:
ACPI thermal zone may support multiple trip points like critical, hot,
passive, active. If an ACPI thermal zone supports critical, passive,
active[0] and active[1] at the same time, it may register itself as a
thermal_zone_device (thermal_zone1) with 4 trip points in all.
It has one processor and one fan, which are both registered as
thermal_cooling_device.
If the processor is listed in _PSL method, and the fan is listed in _AL0
method, the sys I/F structure will be built like this:
/sys/class/thermal:
|thermal_zone1:
|-----type: acpitz
|-----temp: 37000
|-----mode: kernel
|-----trip_point_0_temp: 100000
|-----trip_point_0_type: critical
|-----trip_point_1_temp: 80000
|-----trip_point_1_type: passive
|-----trip_point_2_temp: 70000
|-----trip_point_2_type: active0
|-----trip_point_3_temp: 60000
|-----trip_point_3_type: active1
|-----cdev0: --->/sys/class/thermal/cooling_device0
|-----cdev0_trip_point: 1 /* cdev0 can be used for passive */
|-----cdev1: --->/sys/class/thermal/cooling_device3
|-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
|---type: acpitz
|---temp: 37000
|---mode: kernel
|---trip_point_0_temp: 100000
|---trip_point_0_type: critical
|---trip_point_1_temp: 80000
|---trip_point_1_type: passive
|---trip_point_2_temp: 70000
|---trip_point_2_type: active0
|---trip_point_3_temp: 60000
|---trip_point_3_type: active1
|---cdev0: --->/sys/class/thermal/cooling_device0
|---cdev0_trip_point: 1 /* cdev0 can be used for passive */
|---cdev1: --->/sys/class/thermal/cooling_device3
|---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
|cooling_device0:
|-----type: Processor
|-----max_state: 8
|-----cur_state: 0
|---type: Processor
|---max_state: 8
|---cur_state: 0
|cooling_device3:
|-----type: Fan
|-----max_state: 2
|-----cur_state: 0
|---type: Fan
|---max_state: 2
|---cur_state: 0
/sys/class/hwmon:
|hwmon0:
|-----name: acpitz
|-----temp1_input: 37000
|-----temp1_crit: 100000
|---name: acpitz
|---temp1_input: 37000
|---temp1_crit: 100000
drivers/acpi/acpica/acconfig.h
View file @ f0ede3f3
......@@ -103,9 +103,9 @@
#define ACPI_MAX_REFERENCE_COUNT 0x1000
/* Size of cached memory mapping for system memory operation region */
/* Default page size for use in mapping memory for operation regions */
#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096
#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */
/* owner_id tracking. 8 entries allows for 255 owner_ids */
......
drivers/acpi/acpica/exregion.c
View file @ f0ede3f3
......@@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function,
void *logical_addr_ptr = NULL;
struct acpi_mem_space_context *mem_info = region_context;
u32 length;
acpi_size window_size;
acpi_size map_length;
acpi_size page_boundary_map_length;
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
u32 remainder;
#endif
......@@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function,
}
/*
* Don't attempt to map memory beyond the end of the region, and
* constrain the maximum mapping size to something reasonable.
* Attempt to map from the requested address to the end of the region.
* However, we will never map more than one page, nor will we cross
* a page boundary.
*/
window_size = (acpi_size)
map_length = (acpi_size)
((mem_info->address + mem_info->length) - address);
if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
/*
* If mapping the entire remaining portion of the region will cross
* a page boundary, just map up to the page boundary, do not cross.
* On some systems, crossing a page boundary while mapping regions
* can cause warnings if the pages have different attributes
* due to resource management
*/
page_boundary_map_length =
ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
if (!page_boundary_map_length) {
page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
}
if (map_length > page_boundary_map_length) {
map_length = page_boundary_map_length;
}
/* Create a new mapping starting at the address given */
mem_info->mapped_logical_address =
acpi_os_map_memory((acpi_physical_address) address, window_size);
mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
if (!mem_info->mapped_logical_address) {
ACPI_ERROR((AE_INFO,
"Could not map memory at %8.8X%8.8X, size %X",
ACPI_FORMAT_NATIVE_UINT(address),
(u32) window_size));
(u32) map_length));
mem_info->mapped_length = 0;
return_ACPI_STATUS(AE_NO_MEMORY);
}
......@@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function,
/* Save the physical address and mapping size */
mem_info->mapped_physical_address = address;
mem_info->mapped_length = window_size;
mem_info->mapped_length = map_length;
}
/*
......
drivers/acpi/power_meter.c
View file @ f0ede3f3
......@@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource)
return -EINVAL;
}
return data;
/* _PTP returns 0 on success, nonzero otherwise */
if (data)
return -EINVAL;
return 0;
}
static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,
......
drivers/acpi/proc.c
View file @ f0ede3f3
......@@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file,
struct list_head *node, *next;
char strbuf[5];
char str[5] = "";
int len = count;
unsigned int len = count;
struct acpi_device *found_dev = NULL;
if (len > 4)
......
drivers/acpi/processor_core.c
View file @ f0ede3f3
......@@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier =
.notifier_call = acpi_cpu_soft_notify,
};
static int acpi_processor_add(struct acpi_device *device)
static int __cpuinit acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
int result = 0;
......
drivers/acpi/processor_throttling.c
View file @ f0ede3f3
......@@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
int result = 0;
struct acpi_processor_throttling *pthrottling;
if (!pr)
return -EINVAL;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
pr->throttling.address,
pr->throttling.duty_offset,
pr->throttling.duty_width));
if (!pr)
return -EINVAL;
/*
* Evaluate _PTC, _TSS and _TPC
* They must all be present or none of them can be used.
......
drivers/acpi/sleep.c
View file @ f0ede3f3
......@@ -413,6 +413,30 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
},
},
{
.callback = init_set_sci_en_on_resume,
.ident = "Hewlett-Packard Pavilion dv4",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"),
},
},
{
.callback = init_set_sci_en_on_resume,
.ident = "Hewlett-Packard Pavilion dv7",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"),
},
},
{
.callback = init_set_sci_en_on_resume,
.ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"),
},
},
{
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
......
drivers/acpi/video.c
View file @ f0ede3f3
......@@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file,
u32 state = 0;
if (!dev || count + 1 > sizeof str)
if (!dev || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
......@@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file,
int i;
if (!dev || !dev->brightness || count + 1 > sizeof str)
if (!dev || !dev->brightness || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
......@@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file,
unsigned long long opt, options;
if (!video || count + 1 > sizeof str)
if (!video || count >= sizeof(str))
return -EINVAL;
status = acpi_video_bus_POST_options(video, &options);
......@@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file,
unsigned long opt;
if (!video || count + 1 > sizeof str)
if (!video || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
......
drivers/platform/x86/eeepc-laptop.c
View file @ f0ede3f3
......@@ -150,8 +150,6 @@ struct eeepc_hotk {
/* The actual device the driver binds to */
static struct eeepc_hotk *ehotk;
static void eeepc_rfkill_hotplug(bool real);
/* Platform device/driver */
static int eeepc_hotk_thaw(struct device *device);
static int eeepc_hotk_restore(struct device *device);
......@@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void)
static int eeepc_rfkill_set(void *data, bool blocked)
{
unsigned long asl = (unsigned long)data;
int ret;
if (asl != CM_ASL_WLAN)
return set_acpi(asl, !blocked);
/* hack to avoid panic with rt2860sta */
if (blocked)
eeepc_rfkill_hotplug(false);
ret = set_acpi(asl, !blocked);
return ret;
return set_acpi(asl, !blocked);
}
static const struct rfkill_ops eeepc_rfkill_ops = {
......@@ -367,7 +356,8 @@ static void __devinit eeepc_enable_camera(void)
* If the following call to set_acpi() fails, it's because there's no
* camera so we can ignore the error.
*/
set_acpi(CM_ASL_CAMERA, 1);
if (get_acpi(CM_ASL_CAMERA) == 0)
set_acpi(CM_ASL_CAMERA, 1);
}
/*
......@@ -654,13 +644,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
return 0;
}
static void eeepc_rfkill_hotplug(bool real)
static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
struct pci_bus *bus;
bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
bool blocked = eeepc_wlan_rfkill_blocked();
if (real && ehotk->wlan_rfkill)
if (ehotk->wlan_rfkill)
rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
mutex_lock(&ehotk->hotplug_lock);
......@@ -703,7 +693,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
eeepc_rfkill_hotplug(true);
eeepc_rfkill_hotplug();
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
......@@ -861,7 +851,7 @@ static int eeepc_hotk_restore(struct device *device)
{
/* Refresh both wlan rfkill state and pci hotplug */
if (ehotk->wlan_rfkill)
eeepc_rfkill_hotplug(true);
eeepc_rfkill_hotplug();
if (ehotk->bluetooth_rfkill)
rfkill_set_sw_state(ehotk->bluetooth_rfkill,
......@@ -1004,7 +994,7 @@ static void eeepc_rfkill_exit(void)
* Refresh pci hotplug in case the rfkill state was changed after
* eeepc_unregister_rfkill_notifier()
*/
eeepc_rfkill_hotplug(true);
eeepc_rfkill_hotplug();
if (ehotk->hotplug_slot)
pci_hp_deregister(ehotk->hotplug_slot);
......@@ -1120,7 +1110,7 @@ static int eeepc_rfkill_init(struct device *dev)
* Refresh pci hotplug in case the rfkill state was changed during
* setup.
*/
eeepc_rfkill_hotplug(true);
eeepc_rfkill_hotplug();
exit:
if (result && result != -ENODEV)
......
drivers/thermal/thermal_sys.c
View file @ f0ede3f3
......@@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
switch (type) {
case THERMAL_TRIP_CRITICAL:
return sprintf(buf, "critical");
return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
return sprintf(buf, "hot");
return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
return sprintf(buf, "passive");
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active");
return sprintf(buf, "active\n");
default:
return sprintf(buf, "unknown");
return sprintf(buf, "unknown\n");
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment