Commit f0d44ae3 authored by Anton Vorontsov's avatar Anton Vorontsov Committed by David S. Miller

phylib: Fix Freescale TBI PHY detection

Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of

commit 3ee82383
Author: Giulio Benetti <giulio.benetti@micronovasrl.com>
Date:   Thu Nov 13 21:53:13 2008 +0000

    phy: fix phy address bug

    PHYID returns 0xffff and not 0xffffffff when not found and in some
    case(at91sam9263) 0x0. Maybe this patch could be useful.

phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in
gianfar driver failure to see the TBI PHYs. This code snippet triggers:

	if (!priv->tbiphy) {
		printk(KERN_WARNING "SGMII mode requires that the device "
				"tree specify a tbi-handle\n");
		return;
	}

Although tbi-handle is specified in the device tree.

Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY
manufactured by Xerox :-).
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: default avatarAndy Fleming <afleming@freescale.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f17f5c91
...@@ -231,15 +231,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) ...@@ -231,15 +231,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
if ((phy_id & 0x1fffffff) == 0x1fffffff) if ((phy_id & 0x1fffffff) == 0x1fffffff)
return NULL; return NULL;
/*
* Broken hardware is sometimes missing the pull-up resistor on the
* MDIO line, which results in reads to non-existent devices returning
* 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
* device as well.
*/
if (phy_id == 0)
return NULL;
dev = phy_device_create(bus, addr, phy_id); dev = phy_device_create(bus, addr, phy_id);
return dev; return dev;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment