[SCSI] mvsas: get phy info.

removed unused code and attached SATA address makes use of port id.
enable HBA interrupt after calling sas_register_ha();
Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/mvsas.c

@@ -2743,7 +2743,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
 {
 	struct mvs_phy *phy = &mvi->phy[i];
 	struct pci_dev *pdev = mvi->pdev;
-	u32 tmp, j;
+	u32 tmp;
 	u64 tmp64;
 
 	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
@@ -2770,46 +2770,20 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
 		sas_phy->linkrate =
 			(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
 				PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+		phy->minimum_linkrate =
+			(phy->phy_status &
+				PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+		phy->maximum_linkrate =
+			(phy->phy_status &
+				PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
 
+		if (phy->phy_type & PORT_TYPE_SAS) {
 			/* Updated attached_sas_addr */
 			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
 			phy->att_dev_sas_addr =
 				(u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
 			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
 			phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"phy[%d] Get Attached Address 0x%llX ,"
-			" SAS Address 0x%llX\n",
-			i, phy->att_dev_sas_addr, phy->dev_sas_addr);
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"Rate = %x , type = %d\n",
-			sas_phy->linkrate, phy->phy_type);
-
-#if 1
-		/*
-		* If the device is capable of supporting a wide port
-		* on its phys, it may configure the phys as a wide port.
-		*/
-		if (phy->phy_type & PORT_TYPE_SAS)
-			for (j = 0; j < mvi->chip->n_phy && j != i; ++j) {
-				if ((mvi->phy[j].phy_attached) &&
-					(mvi->phy[j].phy_type & PORT_TYPE_SAS))
-					if (phy->att_dev_sas_addr ==
-					mvi->phy[j].att_dev_sas_addr - 1) {
-						phy->att_dev_sas_addr =
-						mvi->phy[j].att_dev_sas_addr;
-						break;
-					}
-			}
-
-#endif
-
-		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
-		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
-
-		if (phy->phy_type & PORT_TYPE_SAS) {
 			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
 			phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
 			phy->identify.device_type =
@@ -2828,6 +2802,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
 		} else if (phy->phy_type & PORT_TYPE_SATA) {
 			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
 			if (mvs_is_sig_fis_received(phy->irq_status)) {
+				phy->att_dev_sas_addr = i;	/* temp */
 				if (phy_st & PHY_OOB_DTCTD)
 					sas_phy->oob_mode = SATA_OOB_MODE;
 				phy->frame_rcvd_size =
@@ -2837,20 +2812,34 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
 			} else {
 				dev_printk(KERN_DEBUG, &pdev->dev,
 					"No sig fis\n");
+				phy->phy_type &= ~(PORT_TYPE_SATA);
+				goto out_done;
 			}
 		}
+		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			"phy[%d] Get Attached Address 0x%llX ,"
+			" SAS Address 0x%llX\n",
+			i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			"Rate = %x , type = %d\n",
+			sas_phy->linkrate, phy->phy_type);
+
 		/* workaround for HW phy decoding error on 1.5g disk drive */
 		mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
 		tmp = mvs_read_port_vsr_data(mvi, i);
 		if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
 		     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
 			SAS_LINK_RATE_1_5_GBPS)
-			tmp &= ~PHY_MODE6_DTL_SPEED;
+			tmp &= ~PHY_MODE6_LATECLK;
 		else
-			tmp |= PHY_MODE6_DTL_SPEED;
+			tmp |= PHY_MODE6_LATECLK;
 		mvs_write_port_vsr_data(mvi, i, tmp);
 
 	}
+out_done:
 	if (get_st)
 		mvs_write_port_irq_stat(mvi, i, phy->irq_status);
 }
@@ -2875,6 +2864,11 @@ static void mvs_port_formed(struct asd_sas_phy *sas_phy)
 	spin_unlock_irqrestore(&mvi->lock, flags);
 }
 
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+	return TMF_RESP_FUNC_FAILED;
+}
+
 static int __devinit mvs_hw_init(struct mvs_info *mvi)
 {
 	void __iomem *regs = mvi->regs;
@@ -3036,13 +3030,12 @@ static int __devinit mvs_hw_init(struct mvs_info *mvi)
 	/* enable CMD/CMPL_Q/RESP mode */
 	mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
 
-	/* re-enable interrupts globally */
-	mvs_hba_interrupt_enable(mvi);
-
 	/* enable completion queue interrupt */
-	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM);
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
 	mw32(INT_MASK, tmp);
 
+	/* Enable SRS interrupt */
+	mw32(INT_MASK_SRS, 0xFF);
 	return 0;
 }
 
@@ -3116,6 +3109,8 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev,
 
 	mvs_print_info(mvi);
 
+	mvs_hba_interrupt_enable(mvi);
+
 	scsi_scan_host(mvi->shost);
 
 	return 0;
@@ -3161,7 +3156,8 @@ static struct sas_domain_function_template mvs_transport_ops = {
 	.lldd_execute_task	= mvs_task_exec,
 	.lldd_control_phy	= mvs_phy_control,
 	.lldd_abort_task	= mvs_task_abort,
-	.lldd_port_formed	= mvs_port_formed
+	.lldd_port_formed	= mvs_port_formed,
+	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
 };
 
 static struct pci_device_id __devinitdata mvs_pci_table[] = {