Commit e9edcee0 authored by Takashi Iwai's avatar Takashi Iwai Committed by Jaroslav Kysela

[ALSA] hda-codec - More fix of ALC880 codec support

Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver
- Fix some invalid configurations, typos in the last patch
- Make init_verbs chainable, so that different configs can share the same
  init_verbs
- Reorder and clean up the source codes in patch_realtek.c
- Add the pin default configuration parser, used commonly in cmedia
  and realtek patch codes.
- Add 'auto' model to ALC880 for auto-configuration from BIOS
  Use this model as default, and 3-stack as fallback
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent b636a71d
......@@ -638,6 +638,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
asus 3-jack
uniwill 3-jack
F1734 2-jack
CMI9880
minimal 3-jack in back
......@@ -645,6 +648,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
full 6-jack in back, 2-jack in front
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
Note 2: If you get click noises on output, try the module option
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
......
......@@ -1520,9 +1520,9 @@ int snd_hda_build_pcms(struct hda_bus *bus)
*
* If no entries are matching, the function returns a negative value.
*/
int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl)
int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl)
{
struct hda_board_config *c;
const struct hda_board_config *c;
if (codec->bus->modelname) {
for (c = tbl; c->modelname || c->pci_subvendor; c++) {
......@@ -1714,6 +1714,105 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, struct hda_multi_o
return 0;
}
/*
* Helper for automatic ping configuration
*/
/* parse all pin widgets and store the useful pin nids to cfg */
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg)
{
hda_nid_t nid, nid_start;
int i, j, nodes;
short seq, sequences[4], assoc_line_out;
memset(cfg, 0, sizeof(*cfg));
memset(sequences, 0, sizeof(sequences));
assoc_line_out = 0;
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
for (nid = nid_start; nid < nodes + nid_start; nid++) {
unsigned int wid_caps = snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
unsigned int def_conf;
short assoc, loc;
/* read all default configuration for pin complex */
if (wid_type != AC_WID_PIN)
continue;
def_conf = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
loc = get_defcfg_location(def_conf);
switch (get_defcfg_device(def_conf)) {
case AC_JACK_LINE_OUT:
case AC_JACK_SPEAKER:
seq = get_defcfg_sequence(def_conf);
assoc = get_defcfg_association(def_conf);
if (! assoc)
continue;
if (! assoc_line_out)
assoc_line_out = assoc;
else if (assoc_line_out != assoc)
continue;
if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins))
continue;
cfg->line_out_pins[cfg->line_outs] = nid;
sequences[cfg->line_outs] = seq;
cfg->line_outs++;
break;
case AC_JACK_HP_OUT:
cfg->hp_pin = nid;
break;
case AC_JACK_MIC_IN:
if (loc == AC_JACK_LOC_FRONT)
cfg->input_pins[AUTO_PIN_FRONT_MIC] = nid;
else
cfg->input_pins[AUTO_PIN_MIC] = nid;
break;
case AC_JACK_LINE_IN:
if (loc == AC_JACK_LOC_FRONT)
cfg->input_pins[AUTO_PIN_FRONT_LINE] = nid;
else
cfg->input_pins[AUTO_PIN_LINE] = nid;
break;
case AC_JACK_CD:
cfg->input_pins[AUTO_PIN_CD] = nid;
break;
case AC_JACK_AUX:
cfg->input_pins[AUTO_PIN_AUX] = nid;
break;
case AC_JACK_SPDIF_OUT:
cfg->dig_out_pin = nid;
break;
case AC_JACK_SPDIF_IN:
cfg->dig_in_pin = nid;
break;
}
}
/* sort by sequence */
for (i = 0; i < cfg->line_outs; i++)
for (j = i + 1; j < cfg->line_outs; j++)
if (sequences[i] > sequences[j]) {
seq = sequences[i];
sequences[i] = sequences[j];
sequences[j] = seq;
nid = cfg->line_out_pins[i];
cfg->line_out_pins[i] = cfg->line_out_pins[j];
cfg->line_out_pins[j] = nid;
}
/* Swap surround and CLFE: the association order is front/CLFE/surr/back */
if (cfg->line_outs >= 3) {
nid = cfg->line_out_pins[1];
cfg->line_out_pins[1] = cfg->line_out_pins[2];
cfg->line_out_pins[2] = nid;
}
return 0;
}
#ifdef CONFIG_PM
/*
* power management
......
......@@ -68,8 +68,8 @@ struct hda_gspec {
/*
* retrieve the default device type from the default config value
*/
#define get_defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
#define get_defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
#define defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
#define defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
/*
* destructor
......@@ -323,7 +323,7 @@ static struct hda_gnode *parse_output_jack(struct hda_codec *codec,
if (! (node->pin_caps & AC_PINCAP_OUT))
continue;
if (jack_type >= 0) {
if (jack_type != get_defcfg_type(node))
if (jack_type != defcfg_type(node))
continue;
if (node->wid_caps & AC_WCAP_DIGITAL)
continue; /* skip SPDIF */
......@@ -418,8 +418,8 @@ static int capture_source_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *uc
*/
static const char *get_input_type(struct hda_gnode *node, unsigned int *pinctl)
{
unsigned int location = get_defcfg_location(node);
switch (get_defcfg_type(node)) {
unsigned int location = defcfg_location(node);
switch (defcfg_type(node)) {
case AC_JACK_LINE_IN:
if ((location & 0x0f) == AC_JACK_LOC_FRONT)
return "Front Line";
......
......@@ -1458,7 +1458,7 @@ static struct pci_device_id azx_ids[] = {
{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */
{ 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */
{ 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ULI */
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
......
......@@ -130,7 +130,7 @@ struct hda_board_config {
unsigned short pci_subdevice;
};
int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl);
int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl);
int snd_hda_add_new_ctls(struct hda_codec *codec, snd_kcontrol_new_t *knew);
/*
......@@ -158,4 +158,35 @@ struct hda_bus_unsolicited {
struct work_struct work;
};
/*
* Helper for automatic ping configuration
*/
enum {
AUTO_PIN_MIC,
AUTO_PIN_FRONT_MIC,
AUTO_PIN_LINE,
AUTO_PIN_FRONT_LINE,
AUTO_PIN_CD,
AUTO_PIN_AUX,
AUTO_PIN_LAST
};
struct auto_pin_cfg {
int line_outs;
hda_nid_t line_out_pins[4]; /* sorted in the order of Front/Surr/CLFE/Side */
hda_nid_t hp_pin;
hda_nid_t input_pins[AUTO_PIN_LAST];
hda_nid_t dig_out_pin;
hda_nid_t dig_in_pin;
};
#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT)
#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT)
#define get_defcfg_location(cfg) ((cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
#define get_defcfg_device(cfg) ((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg);
#endif /* __SOUND_HDA_LOCAL_H */
......@@ -51,6 +51,7 @@ struct cmi_spec {
/* playback */
struct hda_multi_out multiout;
hda_nid_t dac_nids[4]; /* NID for each DAC */
int num_dacs;
/* capture */
hda_nid_t *adc_nids;
......@@ -77,6 +78,19 @@ struct cmi_spec {
struct hda_verb multi_init[9]; /* 2 verbs for each pin + terminator */
};
/* amp values */
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
#define AMP_OUT_MUTE 0xb080
#define AMP_OUT_UNMUTE 0xb000
#define AMP_OUT_ZERO 0xb000
/* pinctl values */
#define PIN_IN 0x20
#define PIN_VREF80 0x24
#define PIN_VREF50 0x21
#define PIN_OUT 0x40
#define PIN_HP 0xc0
/*
* input MUX
*/
......@@ -114,9 +128,9 @@ static int cmi_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucon
/* 3-stack / 2 channel */
static struct hda_verb cmi9880_ch2_init[] = {
/* set line-in PIN for input */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* set mic PIN for input, also enable vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* route front PCM (DAC1) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
{}
......@@ -125,9 +139,9 @@ static struct hda_verb cmi9880_ch2_init[] = {
/* 3-stack / 6 channel */
static struct hda_verb cmi9880_ch6_init[] = {
/* set line-in PIN for output */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* set mic PIN for output */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* route front PCM (DAC1) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
{}
......@@ -136,9 +150,9 @@ static struct hda_verb cmi9880_ch6_init[] = {
/* 3-stack+front / 8 channel */
static struct hda_verb cmi9880_ch8_init[] = {
/* set line-in PIN for output */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* set mic PIN for output */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* route rear-surround PCM (DAC4) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x03 },
{}
......@@ -281,27 +295,27 @@ static hda_nid_t cmi9880_adc_nids[2] = {
*/
static struct hda_verb cmi9880_basic_init[] = {
/* port-D for line out (rear panel) */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-A for surround (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-C for line-in (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* route front mic to ADC1/2 */
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
......@@ -310,27 +324,27 @@ static struct hda_verb cmi9880_basic_init[] = {
static struct hda_verb cmi9880_allout_init[] = {
/* port-D for line out (rear panel) */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-A for side (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-C for surround (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* route front mic to ADC1/2 */
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
......@@ -365,101 +379,9 @@ static int cmi9880_build_controls(struct hda_codec *codec)
return 0;
}
#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT)
#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT)
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
/* get all pin default configuration in def_conf */
static int cmi9880_get_pin_def_config(struct hda_codec *codec)
{
struct cmi_spec *spec = codec->spec;
hda_nid_t nid, nid_start;
int i = 0, nodes;
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
for (nid = nid_start; nid < nodes + nid_start; nid++) {
unsigned int wid_caps = snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
/* read all default configuration for pin complex */
if (wid_type == AC_WID_PIN) {
spec->pin_nid[i] = nid;
spec->def_conf[i] =
snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONFIG_DEFAULT, 0);
i++;
}
}
spec->pin_def_confs = i;
return 0;
}
/* get a pin default configuration of nid in def_conf */
static unsigned int cmi9880_get_def_config(struct hda_codec *codec, hda_nid_t nid)
{
struct cmi_spec *spec = codec->spec;
int i = 0;
while (spec->pin_nid[i] != nid && i < spec->pin_def_confs)
i++;
if (i == spec->pin_def_confs)
return (unsigned int) -1;
else
return spec->def_conf[i];
}
/* decide what pins to use for multichannel playback */
static int cmi9880_get_multich_pins(struct hda_codec *codec)
{
struct cmi_spec *spec = codec->spec;
int i, j, pins, seq[4];
int max_channel = 0;
unsigned int def_conf, sequence;
hda_nid_t nid;
memset(spec->multich_pin, 0, sizeof(spec->multich_pin));
for (pins = 0, i = 0; i < spec->pin_def_confs && pins < 4; i++) {
def_conf = spec->def_conf[i];
/* skip pin not connected */
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
/* get the sequence if association == 1 */
/* the other pins have association = 0, incorrect in spec 1.0 */
if (get_defcfg_association(def_conf) == 1) {
sequence = get_defcfg_sequence(def_conf);
seq[pins] = sequence;
spec->multich_pin[pins] = spec->pin_nid[i];
pins++; // ready for next slot
max_channel += 2;
}
}
/* sort by sequence, data collected here will be for Windows */
for (i = 0; i < pins; i++) {
for (j = i + 1; j < pins; j++) {
if (seq[j] < seq[i]) {
sequence = seq[j];
nid = spec->multich_pin[j];
seq[j] = seq[i];
spec->multich_pin[j] = spec->multich_pin[i];
seq[i] = sequence;
spec->multich_pin[i] = nid;
}
}
}
/* the pin assignment is for front, C/LFE, surround and back */
if (max_channel >= 6) {
hda_nid_t temp;
/* exchange pin of C/LFE and surround */
temp = spec->multich_pin[1];
spec->multich_pin[1] = spec->multich_pin[2];
spec->multich_pin[2] = temp;
}
return max_channel;
}
/* fill in the multi_dac_nids table, which will decide
which audio widget to use for each channel */
static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec)
static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
struct cmi_spec *spec = codec->spec;
hda_nid_t nid;
......@@ -470,32 +392,34 @@ static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec)
memset(spec->dac_nids, 0, sizeof(spec->dac_nids));
memset(assigned, 0, sizeof(assigned));
/* check the pins we found */
for (i = 0; i < spec->multiout.max_channels / 2; i++) {
nid = spec->multich_pin[i];
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
/* nid 0x0b~0x0e is hardwired to audio widget 0x3~0x6 */
if (nid <= 0x0e && nid >= 0x0b) {
spec->dac_nids[i] = nid - 0x08;
if (nid >= 0x0b && nid <= 0x0e) {
spec->dac_nids[i] = (nid - 0x0b) + 0x03;
assigned[nid - 0x0b] = 1;
}
}
/* left pin can be connect to any audio widget */
for (i = 0; i < spec->multiout.max_channels / 2; i++) {
if (!assigned[i]) {
/* search for an empty channel */
/* I should also check the pin type */
for (j = 0; j < ARRAY_SIZE(spec->dac_nids); j++)
if (! spec->dac_nids[j]) {
spec->dac_nids[j] = i + 3;
assigned[i] = 1;
break;
}
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
if (nid <= 0x0e)
continue;
/* search for an empty channel */
for (j = 0; j < cfg->line_outs; j++) {
if (! assigned[j]) {
spec->dac_nids[i] = i + 0x03;
assigned[j] = 1;
break;
}
}
}
spec->num_dacs = cfg->line_outs;
return 0;
}
/* create multi_init table, which is used for multichannel initialization */
static int cmi9880_fill_multi_init(struct hda_codec *codec)
static int cmi9880_fill_multi_init(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
struct cmi_spec *spec = codec->spec;
hda_nid_t nid;
......@@ -503,29 +427,26 @@ static int cmi9880_fill_multi_init(struct hda_codec *codec)
/* clear the table, only one c-media dac assumed here */
memset(spec->multi_init, 0, sizeof(spec->multi_init));
for (j = 0, i = 0; i < spec->multiout.max_channels / 2; i++) {
for (j = 0, i = 0; i < cfg->line_outs; i++) {
hda_nid_t conn[4];
nid = spec->multich_pin[i];
nid = cfg->line_out_pins[i];
/* set as output */
spec->multi_init[j].nid = nid;
spec->multi_init[j].verb = AC_VERB_SET_PIN_WIDGET_CONTROL;
spec->multi_init[j].param = 0xc0;
spec->multi_init[j].param = PIN_OUT;
j++;
/* nid 0x0f,0x10,0x1f,0x20 are needed to set connection */
switch (nid) {
case 0x0f:
case 0x10:
case 0x1f:
case 0x20:
if (nid > 0x0e) {
/* set connection */
spec->multi_init[j].nid = nid;
spec->multi_init[j].verb = AC_VERB_SET_CONNECT_SEL;
spec->multi_init[j].param = 0;
/* find the index in connect list */
len = snd_hda_get_connections(codec, nid, conn, 4);
for (k = 0; k < len; k++)
if (conn[k] == spec->dac_nids[i])
if (conn[k] == spec->dac_nids[i]) {
spec->multi_init[j].param = j;
break;
spec->multi_init[j].param = k < len ? k : 0;
}
j++;
break;
}
......@@ -759,6 +680,7 @@ static int patch_cmi9880(struct hda_codec *codec)
/* copy default DAC NIDs */
memcpy(spec->dac_nids, cmi9880_dac_nids, sizeof(spec->dac_nids));
spec->num_dacs = 4;
switch (spec->board_config) {
case CMI_MINIMAL:
......@@ -795,18 +717,16 @@ static int patch_cmi9880(struct hda_codec *codec)
{
unsigned int port_e, port_f, port_g, port_h;
unsigned int port_spdifi, port_spdifo;
int max_channels;
struct auto_pin_cfg cfg;
/* collect pin default configuration */
cmi9880_get_pin_def_config(codec);
port_e = cmi9880_get_def_config(codec, 0x0f);
port_f = cmi9880_get_def_config(codec, 0x10);
port_g = cmi9880_get_def_config(codec, 0x1f);
port_h = cmi9880_get_def_config(codec, 0x20);
port_spdifi = cmi9880_get_def_config(codec, 0x13);
port_spdifo = cmi9880_get_def_config(codec, 0x12);
port_e = snd_hda_codec_read(codec, 0x0f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
port_f = snd_hda_codec_read(codec, 0x10, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
spec->front_panel = 1;
if (get_defcfg_connect(port_e) == AC_JACK_PORT_NONE ||
get_defcfg_connect(port_f) == AC_JACK_PORT_NONE) {
port_g = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
port_h = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
spec->surr_switch = 1;
/* no front panel */
if (get_defcfg_connect(port_g) == AC_JACK_PORT_NONE ||
......@@ -824,24 +744,26 @@ static int patch_cmi9880(struct hda_codec *codec)
spec->multiout.max_channels = cmi9880_channel_modes[0].channels;
} else {
spec->input_mux = &cmi9880_basic_mux;
port_spdifi = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
port_spdifo = snd_hda_codec_read(codec, 0x12, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(port_spdifo) != AC_JACK_PORT_NONE)
spec->multiout.dig_out_nid = CMI_DIG_OUT_NID;
if (get_defcfg_connect(port_spdifi) != AC_JACK_PORT_NONE)
spec->dig_in_nid = CMI_DIG_IN_NID;
spec->multiout.max_channels = 8;
}
max_channels = cmi9880_get_multich_pins(codec);
if (max_channels > 0) {
spec->multiout.max_channels = max_channels;
cmi9880_fill_multi_dac_nids(codec);
cmi9880_fill_multi_init(codec);
snd_hda_parse_pin_def_config(codec, &cfg);
if (cfg.line_outs) {
spec->multiout.max_channels = cfg.line_outs * 2;
cmi9880_fill_multi_dac_nids(codec, &cfg);
cmi9880_fill_multi_init(codec, &cfg);
} else
snd_printd("patch_cmedia: cannot detect association in defcfg\n");
break;
}
}
spec->multiout.num_dacs = 4;
spec->multiout.num_dacs = spec->num_dacs;
spec->multiout.dac_nids = spec->dac_nids;
spec->adc_nids = cmi9880_adc_nids;
......
......@@ -39,13 +39,16 @@ enum {
ALC880_5ST_DIG,
ALC880_W810,
ALC880_Z71V,
ALC880_TEST,
ALC880_AUTO,
ALC880_6ST_DIG,
ALC880_F1734,
ALC880_ASUS,
ALC880_ASUS_DIG,
ALC880_ASUS_W1V,
ALC880_UNIWILL_DIG,
#ifdef CONFIG_SND_DEBUG
ALC880_TEST,
#endif
ALC880_MODEL_LAST /* last tag */
};
......@@ -56,19 +59,28 @@ enum {
ALC260_MODEL_LAST /* last tag */
};
/* amp values */
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
#define AMP_OUT_MUTE 0xb080
#define AMP_OUT_UNMUTE 0xb000
#define AMP_OUT_ZERO 0xb000
/* pinctl values */
#define PIN_IN 0x20
#define PIN_VREF80 0x24
#define PIN_VREF50 0x21
#define PIN_OUT 0x40
#define PIN_HP 0xc0
struct alc_spec {
/* codec parameterization */
unsigned int front_panel: 1; /* indicates the board has a front panel;
* not referred currently for any purpose,
* though...
*/
snd_kcontrol_new_t *mixers[2]; /* mixer arrays */
snd_kcontrol_new_t *mixers[3]; /* mixer arrays */
unsigned int num_mixers;
struct hda_verb *init_verbs; /* initialization verbs
* don't forget NULL termination!
*/
const struct hda_verb *init_verbs[3]; /* initialization verbs
* don't forget NULL termination!
*/
unsigned int num_init_verbs;
char *stream_name_analog; /* analog PCM stream */
struct hda_pcm_stream *stream_analog_playback;
......@@ -101,96 +113,14 @@ struct alc_spec {
struct hda_pcm pcm_rec[2]; /* used in alc_build_pcms() */
struct semaphore bind_mutex; /* for bound controls */
};
/* DAC/ADC assignment */
static hda_nid_t alc880_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x05, 0x04, 0x03
};
static hda_nid_t alc880_6st_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
};
static hda_nid_t alc880_w810_dac_nids[3] = {
/* front, rear/surround, clfe */
0x02, 0x03, 0x04
};
static hda_nid_t alc880_z71v_dac_nids[1] = {
/* front only? */
0x02
};
#if 0
/* The datasheet says the node 0x07 is connected from inputs,
* but it shows zero connection in the real implementation on some devices.
*/
static hda_nid_t alc880_adc_nids[3] = {
/* ADC0-2 */
0x07, 0x08, 0x09,
};
#else
static hda_nid_t alc880_adc_nids[2] = {
/* ADC1-2 */
0x08, 0x09,
};
#endif
#define ALC880_DIGOUT_NID 0x06
#define ALC880_DIGIN_NID 0x0a
static hda_nid_t alc260_dac_nids[1] = {
/* front */
0x02,
};
static hda_nid_t alc260_adc_nids[1] = {
/* ADC0 */
0x04,
};
static hda_nid_t alc260_hp_adc_nids[1] = {
/* ADC1 */
0x05,
};
#define ALC260_DIGOUT_NID 0x03
#define ALC260_DIGIN_NID 0x06
static struct hda_input_mux alc880_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x3 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
unsigned int num_kctl_alloc, num_kctl_used;
snd_kcontrol_new_t *kctl_alloc;
struct hda_input_mux private_imux;
};
//pshou 05/24/05
static struct hda_input_mux alc880_6stack_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
static struct hda_input_mux alc260_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
/*
* input MUX handling
......@@ -221,6 +151,7 @@ static int alc_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucon
spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]);
}
/*
* channel mode setting
*/
......@@ -229,133 +160,6 @@ struct alc_channel_mode {
const struct hda_verb *sequence;
};
/*
* channel source setting (2/6 channel selection for 3-stack)
*/
/*
* set the path ways for 2 channel output
* need to set the codec line out and mic 1 pin widgets to inputs
*/
static struct hda_verb alc880_threestack_ch2_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* set pin widget 18h (mic1) for input, for mic also enable the vref */
{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* mute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
/* mute for Mic1 PW */
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
{ } /* end */
};
/*
* 6ch mode
* need to set the codec line out and mic 1 pin widgets to outputs
*/
static struct hda_verb alc880_threestack_ch6_init[] = {
/* set pin widget 1Ah (line in) for output */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* set pin widget 18h (mic1) for output */
{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* unmute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
/* unmute for Mic1 PW */
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
/* for rear channel output using Line In 1
* set select widget connection (nid = 0x12) - to summer node
* for rear NID = 0x0f...offset 3 in connection list
*/
{ 0x12, AC_VERB_SET_CONNECT_SEL, 0x3 },
/* for Mic1 - retask for center/lfe */
/* set select widget connection (nid = 0x10) - to summer node for
* front CLFE NID = 0x0e...offset 2 in connection list
*/
{ 0x10, AC_VERB_SET_CONNECT_SEL, 0x2 },
{ } /* end */
};
static struct alc_channel_mode alc880_threestack_modes[2] = {
{ 2, alc880_threestack_ch2_init },
{ 6, alc880_threestack_ch6_init },
};
/*
* channel source setting (6/8 channel selection for 5-stack)
*/
/* set the path ways for 6 channel output
* need to set the codec line out and mic 1 pin widgets to inputs
*/
static struct hda_verb alc880_fivestack_ch6_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* mute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
{ } /* end */
};
/* need to set the codec line out and mic 1 pin widgets to outputs */
static struct hda_verb alc880_fivestack_ch8_init[] = {
/* set pin widget 1Ah (line in) for output */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* unmute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
/* output for surround channel output using Line In 1 */
/* set select widget connection (nid = 0x12) - to summer node
* for surr_rear NID = 0x0d...offset 1 in connection list
*/
{ 0x12, AC_VERB_SET_CONNECT_SEL, 0x1 },
{ } /* end */
};
static struct alc_channel_mode alc880_fivestack_modes[2] = {
{ 6, alc880_fivestack_ch6_init },
{ 8, alc880_fivestack_ch8_init },
};
/*
* channel source setting for W810 system
*
* W810 has rear IO for:
* Front (DAC 02)
* Surround (DAC 03)
* Center/LFE (DAC 04)
* Digital out (06)
*
* The system also has a pair of internal speakers, and a headphone jack.
* These are both connected to Line2 on the codec, hence to DAC 02.
*
* There is a variable resistor to control the speaker or headphone
* volume. This is a hardware-only device without a software API.
*
* Plugging headphones in will disable the internal speakers. This is
* implemented in hardware, not via the driver using jack sense. In
* a similar fashion, plugging into the rear socket marked "front" will
* disable both the speakers and headphones.
*
* For input, there's a microphone jack, and an "audio in" jack.
* These may not do anything useful with this driver yet, because I
* haven't setup any initialization verbs for these yet...
*/
static struct alc_channel_mode alc880_w810_modes[1] = {
{ 6, NULL }
};
static struct alc_channel_mode alc880_z71v_modes[1] = {
{ 2, NULL }
};
//pshou 05/19/05
static struct alc_channel_mode alc880_sixstack_modes[1] = {
{ 8, NULL },
};
/*
*/
static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
......@@ -478,18 +282,79 @@ static int alc_bind_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *u
#define ALC_BIND_MUTE(xname,nid,indices,dir) ALC_BIND_MUTE_MONO(xname,nid,3,indices,dir)
/*
* ALC880 3-stack model
*
* DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e)
* Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18, F-Mic = 0x1b
* HP = 0x19
*/
/* 3-stack mode
* Pin assignment: Front=0x14, Line-In/Rear=0x1a, Mic/CLFE=0x18, F-Mic=0x1b
* HP=0x19
static hda_nid_t alc880_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x05, 0x04, 0x03
};
static hda_nid_t alc880_adc_nids[3] = {
/* ADC0-2 */
0x07, 0x08, 0x09,
};
/* The datasheet says the node 0x07 is connected from inputs,
* but it shows zero connection in the real implementation on some devices.
*/
static snd_kcontrol_new_t alc880_base_mixer[] = {
static hda_nid_t alc880_adc_nids_alt[2] = {
/* ADC1-2 */
0x08, 0x09,
};
#define ALC880_DIGOUT_NID 0x06
#define ALC880_DIGIN_NID 0x0a
static struct hda_input_mux alc880_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x3 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
/* channel source setting (2/6 channel selection for 3-stack) */
/* 2ch mode */
static struct hda_verb alc880_threestack_ch2_init[] = {
/* set line-in to input, mute it */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
/* set mic-in to input vref 80%, mute it */
{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
{ } /* end */
};
/* 6ch mode */
static struct hda_verb alc880_threestack_ch6_init[] = {
/* set line-in to output, unmute it */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
/* set mic-in to output, unmute it */
{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
{ } /* end */
};
static struct alc_channel_mode alc880_threestack_modes[2] = {
{ 2, alc880_threestack_ch2_init },
{ 6, alc880_threestack_ch6_init },
};
static snd_kcontrol_new_t alc880_three_stack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Surround Playback Switch", 0x1a, 2, HDA_INPUT),
ALC_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
......@@ -504,13 +369,25 @@ static snd_kcontrol_new_t alc880_base_mixer[] = {
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
/* We don't use NID 0x07 - see above */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
},
{ } /* end */
};
/* capture mixer elements */
static snd_kcontrol_new_t alc880_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
......@@ -519,49 +396,16 @@ static snd_kcontrol_new_t alc880_base_mixer[] = {
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.count = 3,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
},
{ } /* end */
};
/* 5-stack mode
* Pin assignment: Front=0x14, Rear=0x17, CLFE=0x16
* Line-In/Side=0x1a, Mic=0x18, F-Mic=0x1b, HP=0x19
*/
static snd_kcontrol_new_t alc880_five_stack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
/* HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), */
HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
/* We don't use NID 0x07 - see above */
/* capture mixer elements (in case NID 0x07 not available) */
static snd_kcontrol_new_t alc880_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
......@@ -579,80 +423,77 @@ static snd_kcontrol_new_t alc880_five_stack_mixer[] = {
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
},
{ } /* end */
};
static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 3,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
/*
* ALC880 5-stack model
*
* DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d), Side = 0x02 (0xd)
* Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16
* Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19
*/
/* additional mixers to alc880_three_stack_mixer */
static snd_kcontrol_new_t alc880_five_stack_mixer[] = {
HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT),
{ } /* end */
};
static snd_kcontrol_new_t alc880_z71v_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 3,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
/* channel source setting (6/8 channel selection for 5-stack) */
/* 6ch mode */
static struct hda_verb alc880_fivestack_ch6_init[] = {
/* set line-in to input, mute it */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
{ } /* end */
};
//pshou 05/24/05
/* 8ch mode */
static struct hda_verb alc880_fivestack_ch8_init[] = {
/* set line-in to output, unmute it */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
{ } /* end */
};
static struct alc_channel_mode alc880_fivestack_modes[2] = {
{ 6, alc880_fivestack_ch6_init },
{ 8, alc880_fivestack_ch8_init },
};
/*
* ALC880 6-stack model
*
* DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e), Side = 0x05 (0x0f)
* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17,
* Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b
*/
static hda_nid_t alc880_6st_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
};
static struct hda_input_mux alc880_6stack_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
/* fixed 8-channels */
static struct alc_channel_mode alc880_sixstack_modes[1] = {
{ 8, NULL },
};
static snd_kcontrol_new_t alc880_six_stack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
......@@ -674,25 +515,6 @@ static snd_kcontrol_new_t alc880_six_stack_mixer[] = {
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
/* HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), */
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
......@@ -703,36 +525,44 @@ static snd_kcontrol_new_t alc880_six_stack_mixer[] = {
{ } /* end */
};
// 03/08/05 Fujitsu
static snd_kcontrol_new_t alc880_2_jack_mixer[] = {
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
/*
* ALC880 W810 model
*
* W810 has rear IO for:
* Front (DAC 02)
* Surround (DAC 03)
* Center/LFE (DAC 04)
* Digital out (06)
*
* The system also has a pair of internal speakers, and a headphone jack.
* These are both connected to Line2 on the codec, hence to DAC 02.
*
* There is a variable resistor to control the speaker or headphone
* volume. This is a hardware-only device without a software API.
*
* Plugging headphones in will disable the internal speakers. This is
* implemented in hardware, not via the driver using jack sense. In
* a similar fashion, plugging into the rear socket marked "front" will
* disable both the speakers and headphones.
*
* For input, there's a microphone jack, and an "audio in" jack.
* These may not do anything useful with this driver yet, because I
* haven't setup any initialization verbs for these yet...
*/
static hda_nid_t alc880_w810_dac_nids[3] = {
/* front, rear/surround, clfe */
0x02, 0x03, 0x04
};
//pshou 04/24/05
static snd_kcontrol_new_t alc880_asus_mixer[] = {
/* fixed 6 channels */
static struct alc_channel_mode alc880_w810_modes[1] = {
{ 6, NULL }
};
/* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, HP = 0x1b */
static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
......@@ -741,41 +571,80 @@ static snd_kcontrol_new_t alc880_asus_mixer[] = {
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
{ } /* end */
};
/*
* Z710V model
*
* DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d)
* Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?), Line = 0x1a
*/
static hda_nid_t alc880_z71v_dac_nids[1] = {
0x02
};
#define ALC880_Z71V_HP_DAC 0x03
/* fixed 2 channels */
static struct alc_channel_mode alc880_2_jack_modes[1] = {
{ 2, NULL }
};
static snd_kcontrol_new_t alc880_z71v_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
},
{ } /* end */
};
// pshou 05/03/05
static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = {
/* FIXME! */
/*
* ALC880 F1734 model
*
* DAC: HP = 0x02 (0x0c), Front = 0x03 (0x0d)
* Pin assignment: HP = 0x14, Front = 0x15, Mic = 0x18
*/
static hda_nid_t alc880_f1734_dac_nids[1] = {
0x03
};
#define ALC880_F1734_HP_DAC 0x02
static snd_kcontrol_new_t alc880_f1734_mixer[] = {
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
{ } /* end */
};
/* FIXME! */
/*
* ALC880 ASUS model
*
* DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
* Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
* Mic = 0x18, Line = 0x1a
*/
#define alc880_asus_dac_nids alc880_w810_dac_nids /* identical with w810 */
#define alc880_asus_modes alc880_threestack_modes /* 2/6 channel mode */
static snd_kcontrol_new_t alc880_asus_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
......@@ -788,27 +657,8 @@ static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = {
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
......@@ -818,7 +668,26 @@ static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = {
},
{ } /* end */
};
/* FIXME! */
/*
* ALC880 ASUS W1V model
*
* DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
* Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
* Mic = 0x18, Line = 0x1a, Line2 = 0x1b
*/
/* additional mixers to alc880_asus_mixer */
static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = {
HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT),
{ } /* end */
};
/*
* build control elements
*/
static int alc_build_controls(struct hda_codec *codec)
{
......@@ -845,453 +714,297 @@ static int alc_build_controls(struct hda_codec *codec)
return 0;
}
/*
* initialize the codec volumes, etc
*/
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
#define AMP_OUT_MUTE 0xb080
#define AMP_OUT_UNMUTE 0xb000
#define AMP_OUT_ZERO 0xb000
#define PIN_IN 0x20
#define PIN_VREF80 0x24
#define PIN_VREF50 0x21
#define PIN_OUT 0x40
#define PIN_HP 0xc0
static struct hda_verb alc880_init_verbs_three_stack[] = {
/* Set pin widgets for output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* unmute capture amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc880_volume_init_verbs[] = {
/*
* Unmute ADC0-2 and set the default input to mic-in
*/
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute capture1 amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute capture2 amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* set vol=0 front mixer amp */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* unmute front-out pin widget amp (no gain on this amp) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* set vol=0 rear mixer amp */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* mute line-in pin widget amp left and right (no gain on this amp) */
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* set vol=0 clfe mixer amp */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* mute mic pin widget amp left and right (no gain on this amp) */
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* using rear surround as the path for headphone output */
/* set vol=0 rear surround mixer amp */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* PASD 3 stack boards use the Mic 2 as the headphone output */
/* need to program the selector associated with the Mic 2 pin widget to
* surround path (index 0x01) for headphone output */
{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
/* unmute pin widget amp left and right (no gain on this amp) */
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* need to retask the Mic 2 pin widget to output */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer widget(nid=0x0B)
* to support the input path of analog loopback
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
/* mute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
/* mute Mic 1 */
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* mute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* Unmute input amps for the line out paths to support the output path of
* analog loopback
* the mixers on the output path has 2 inputs, one from the DAC and one
* from the mixer
/*
* Set up output mixers (0x0c - 0x0f)
*/
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
/* set vol=0 to output mixers */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* set up input amps for analog loopback */
/* Amp Indices: DAC = 0, mixer = 1 */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute rear Surround out path */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{ }
};
static struct hda_verb alc880_init_verbs_five_stack[] = {
/* Set pin widgets for output */
/*
* 3-stack pin configuration:
* front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b
*/
static struct hda_verb alc880_pin_3stack_init_verbs[] = {
/*
* preset connection lists of input pins
* 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
*/
{0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
{0x12, AC_VERB_SET_CONNECT_SEL, 0x03}, /* line/surround */
/*
* Set pin mode and muting
*/
/* set front pin widgets 0x14 for output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Mic2 (as headphone out) for HP output */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Line2 (as front mic) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* mute capture amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* mute amp1 left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* mute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* set vol=0 front mixer amp */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* unmute front-out pin widget amp (no gain on this amp) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* set vol=0 rear mixer amp */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* unmute rear-out pin widget (no gain on this amp) */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* set vol=0 clfe mixer amp */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* unmute clfe-pin widget amp (no gain on this amp) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* using rear surround as the path for headphone output */
/* set vol=0 rear surround mixer amp */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* PASD 3 stack boards use the Mic 2 as the headphone output */
/* need to program the selector associated with the Mic 2 pin widget to
* surround path (index 0x01) for headphone output
*/
{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
/* mute pin widget amp left and right (no gain on this amp) */
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* need to retask the Mic 2 pin widget to output */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{ }
};
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
* widget(nid=0x0B) to support the input path of analog loopback
/*
* 5-stack pin configuration:
* front = 0x14, surround = 0x17, clfe = 0x16, mic = 0x18, HP = 0x19,
* line-in/side = 0x1a, f-mic = 0x1b
*/
static struct hda_verb alc880_pin_5stack_init_verbs[] = {
/*
* preset connection lists of input pins
* 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
*/
/* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
{0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/side */
/* Unmute input amps for the line out paths to support the output path of
* analog loopback
* the mixers on the output path has 2 inputs, one from the DAC and
* one from the mixer
/*
* Set pin mode and muting
*/
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute rear Surround out path */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* set pin widgets 0x14-0x17 for output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* unmute pins for output (no gain on this amp) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Mic2 (as headphone out) for HP output */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Line2 (as front mic) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{ }
};
static struct hda_verb alc880_w810_init_verbs[] = {
/* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* front channel selector/amp: output 0: unmuted, max volume */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* front out pin: muted, (no volume selection) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/*
* W810 pin configuration:
* front = 0x14, surround = 0x15, clfe = 0x16, HP = 0x1b
*/
static struct hda_verb alc880_pin_w810_init_verbs[] = {
/* hphone/speaker input selector: front DAC */
{0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
/* front out pin: NOT headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* surround channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* surround channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* surround channel selector/amp: output 0: unmuted, max volume */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* surround out pin: muted, (no volume selection) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* surround out pin: NOT headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* c/lfe channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* c/lfe channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* c/lfe channel selector/amp: output 0: unmuted, max volume */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* c/lfe out pin: muted, (no volume selection) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* c/lfe out pin: NOT headphone enable, out enable, vref disabled */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* hphone/speaker input selector: front DAC */
{0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
/* hphone/speaker out pin: muted, (no volume selection) */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* hphone/speaker out pin: NOT headphone enable, out enable, vref disabled */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{ }
};
static struct hda_verb alc880_z71v_init_verbs[] = {
/* front channel selector/amp: muted, DAC and mix (no vol) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* front channel selector/amp: output 0: vol=0 */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* front out pin: unmuted, (no volume selection) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* front out pin: NOT headphone enable, out enable, vref disabled */
/*
* Z71V pin configuration:
* Speaker-out = 0x14, HP = 0x15, Mic = 0x18, Line-in = 0x1a, Mic2 = 0x1b (?)
*/
static struct hda_verb alc880_pin_z71v_init_verbs[] = {
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* headphone channel selector/amp: muted, DAC and mix (no vol) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* headphone channel selector/amp: output 0: vol=0 */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* headphone out pin: muted, (no volume selection) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* headpohne out pin: headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* set connection select to mic in */
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
* widget(nid=0x0B) to support the input path of analog loopback
*/
/* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{ }
};
//pshou 05/24/05
static struct hda_verb alc880_six_stack_init_verbs[] = {
/*
* 6-stack pin configuration:
* front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18, f-mic = 0x19,
* line = 0x1a, HP = 0x1b
*/
static struct hda_verb alc880_pin_6stack_init_verbs[] = {
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{ }
};
/* FIXME! */
/*
* F1734 pin configuration:
* HP = 0x14, speaker-out = 0x15, mic = 0x18
*/
static struct hda_verb alc880_pin_f1734_init_verbs[] = {
{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x07, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
* widget(nid=0x0B) to support the input path of analog loopback
*/
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* unmute Mic 2 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Unmute Front out path */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mute */
/* Unmute rear Surround out path */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{ }
};
static struct hda_verb alc880_2_jack_init_verbs[] = {
/* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x07, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x0C, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1B, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
{ }
};
static struct hda_verb alc880_asus_init_verbs[] = {
/* FIXME! */
/*
* ASUS pin configuration:
* HP/front = 0x14, surr = 0x15, clfe = 0x16, mic = 0x18, line = 0x1a
*/
static struct hda_verb alc880_pin_asus_init_verbs[] = {
{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{ }
};
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
/* Enable GPIO mask and set output */
static struct hda_verb alc880_gpio1_init_verbs[] = {
{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
};
{ }
/* Enable GPIO mask and set output */
static struct hda_verb alc880_gpio2_init_verbs[] = {
{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
{0x01, AC_VERB_SET_GPIO_DATA, 0x02},
};
/*
*/
static int alc_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
snd_hda_sequence_write(codec, spec->init_verbs);
unsigned int i;
for (i = 0; i < spec->num_init_verbs; i++)
snd_hda_sequence_write(codec, spec->init_verbs[i]);
return 0;
}
......@@ -1305,9 +1018,8 @@ static int alc_resume(struct hda_codec *codec)
int i;
alc_init(codec);
for (i = 0; i < spec->num_mixers; i++) {
for (i = 0; i < spec->num_mixers; i++)
snd_hda_resume_ctls(codec, spec->mixers[i]);
}
if (spec->multiout.dig_out_nid)
snd_hda_resume_spdif_out(codec);
if (spec->dig_in_nid)
......@@ -1399,7 +1111,7 @@ static struct hda_pcm_stream alc880_pcm_analog_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
.nid = 0x02, /* NID to query formats and rates */
/* NID is set in alc_build_pcms */
.ops = {
.open = alc880_playback_pcm_open,
.prepare = alc880_playback_pcm_prepare,
......@@ -1411,9 +1123,7 @@ static struct hda_pcm_stream alc880_pcm_analog_capture = {
.substreams = 2,
.channels_min = 2,
.channels_max = 2,
.nid = 0x08, /* NID to query formats and rates
* (0x07 might be broken on some devices)
*/
/* NID is set in alc_build_pcms */
.ops = {
.prepare = alc880_capture_pcm_prepare,
.cleanup = alc880_capture_pcm_cleanup
......@@ -1449,7 +1159,9 @@ static int alc_build_pcms(struct hda_codec *codec)
info->name = spec->stream_name_analog;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0];
info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0;
for (i = 0; i < spec->num_channel_mode; i++) {
......@@ -1477,7 +1189,18 @@ static int alc_build_pcms(struct hda_codec *codec)
static void alc_free(struct hda_codec *codec)
{
kfree(codec->spec);
struct alc_spec *spec = codec->spec;
unsigned int i;
if (! spec)
return;
if (spec->kctl_alloc) {
for (i = 0; i < spec->num_kctl_used; i++)
kfree(spec->kctl_alloc[i].name);
kfree(spec->kctl_alloc);
}
kfree(spec);
}
/*
......@@ -1840,7 +1563,7 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG },
{ .modelname = "asua", .config = ALC880_ASUS },
{ .modelname = "asus", .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1973, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x19b3, .config = ALC880_ASUS_DIG },
......@@ -1869,10 +1592,8 @@ static struct hda_board_config alc880_cfg_tbl[] = {
* configuration template - to be copied to the spec instance
*/
struct alc_config_preset {
snd_kcontrol_new_t *mixers;
unsigned int front_panel: 1; /* optional */
unsigned int gpio_payload; /* optional */
struct hda_verb *init_verbs;
snd_kcontrol_new_t *mixers[4];
const struct hda_verb *init_verbs[4];
unsigned int num_dacs;
hda_nid_t *dac_nids;
hda_nid_t dig_out_nid; /* optional */
......@@ -1886,174 +1607,134 @@ struct alc_config_preset {
static struct alc_config_preset alc880_presets[] = {
[ALC880_3ST] = {
.mixers = alc880_base_mixer,
.init_verbs = alc880_init_verbs_three_stack,
.mixers = { alc880_three_stack_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.front_panel = 1,
.dac_nids = alc880_dac_nids,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_3ST_DIG] = {
.mixers = alc880_base_mixer,
.init_verbs = alc880_init_verbs_three_stack,
.mixers = { alc880_three_stack_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.front_panel = 1,
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_5ST] = {
.mixers = alc880_five_stack_mixer,
.init_verbs = alc880_init_verbs_five_stack,
.front_panel = 1,
.mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer},
.init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
.channel_mode = alc880_fivestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_5ST_DIG] = {
.mixers = alc880_five_stack_mixer,
.init_verbs = alc880_init_verbs_five_stack,
.front_panel = 1,
.mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
.channel_mode = alc880_fivestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_6ST_DIG] = {
.mixers = alc880_six_stack_mixer,
.init_verbs = alc880_six_stack_init_verbs,
.front_panel = 1,
.mixers = { alc880_six_stack_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
.dac_nids = alc880_6st_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
.channel_mode = alc880_sixstack_modes,
.input_mux = &alc880_6stack_capture_source,
},
[ALC880_W810] = {
.mixers = alc880_w810_base_mixer,
.init_verbs = alc880_w810_init_verbs,
.gpio_payload = 0x2,
.mixers = { alc880_w810_base_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
.dac_nids = alc880_w810_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
// No dedicated headphone socket - it's shared with built-in speakers.
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
.channel_mode = alc880_w810_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_Z71V] = {
.mixers = alc880_z71v_mixer,
.init_verbs = alc880_z71v_init_verbs,
.mixers = { alc880_z71v_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs,
alc880_gpio2_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids),
.dac_nids = alc880_z71v_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_z71v_modes),
.channel_mode = alc880_z71v_modes,
.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_F1734] = {
.mixers = alc880_2_jack_mixer,
.init_verbs = alc880_2_jack_init_verbs,
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_z71v_modes),
.channel_mode = alc880_z71v_modes,
.mixers = { alc880_f1734_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_f1734_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids),
.dac_nids = alc880_f1734_dac_nids,
.hp_nid = 0x02,
.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS] = {
.mixers = alc880_asus_mixer,
.init_verbs = alc880_asus_init_verbs,
.gpio_payload = 0x1,
.front_panel = 1,
.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
.dac_nids = alc880_w810_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.mixers = { alc880_asus_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_DIG] = {
.mixers = alc880_asus_mixer,
.init_verbs = alc880_asus_init_verbs,
.gpio_payload = 0x1,
.front_panel = 1,
.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
.dac_nids = alc880_w810_dac_nids,
.mixers = { alc880_asus_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_W1V] = {
.mixers = alc880_asus_w1v_mixer,
.init_verbs = alc880_asus_init_verbs,
.gpio_payload = 0x1,
.front_panel = 1,
.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
.dac_nids = alc880_w810_dac_nids,
.mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_UNIWILL_DIG] = {
.mixers = alc880_asus_mixer,
.init_verbs = alc880_asus_init_verbs,
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.mixers = { alc880_asus_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.hp_nid = 0x03,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
#ifdef CONFIG_SND_DEBUG
[ALC880_TEST] = {
.mixers = alc880_test_mixer,
.init_verbs = alc880_test_init_verbs,
.mixers = { alc880_test_mixer },
.init_verbs = { alc880_test_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_test_dac_nids),
.dac_nids = alc880_test_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
.adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_test_modes),
.channel_mode = alc880_test_modes,
.input_mux = &alc880_test_capture_source,
......@@ -2061,11 +1742,333 @@ static struct alc_config_preset alc880_presets[] = {
#endif
};
/*
* Automatic parse of I/O pins from the BIOS configuration
*/
#define NUM_CONTROL_ALLOC 32
#define NUM_VERB_ALLOC 32
enum {
ALC_CTL_WIDGET_VOL,
ALC_CTL_WIDGET_MUTE,
ALC_CTL_BIND_MUTE,
};
static snd_kcontrol_new_t alc880_control_templates[] = {
HDA_CODEC_VOLUME(NULL, 0, 0, 0),
HDA_CODEC_MUTE(NULL, 0, 0, 0),
ALC_BIND_MUTE(NULL, 0, 0, 0),
};
/* add dynamic controls */
static int add_control(struct alc_spec *spec, int type, const char *name, unsigned long val)
{
snd_kcontrol_new_t *knew;
if (spec->num_kctl_used >= spec->num_kctl_alloc) {
int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
if (! knew)
return -ENOMEM;
if (spec->kctl_alloc) {
memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
kfree(spec->kctl_alloc);
}
spec->kctl_alloc = knew;
spec->num_kctl_alloc = num;
}
knew = &spec->kctl_alloc[spec->num_kctl_used];
*knew = alc880_control_templates[type];
knew->name = snd_kmalloc_strdup(name, GFP_KERNEL);
if (! knew->name)
return -ENOMEM;
knew->private_value = val;
spec->num_kctl_used++;
return 0;
}
#define alc880_is_fixed_pin(nid) ((nid) >= 0x14 && (nid) <= 0x17)
#define alc880_fixed_pin_idx(nid) ((nid) - 0x14)
#define alc880_is_multi_pin(nid) ((nid) >= 0x18)
#define alc880_multi_pin_idx(nid) ((nid) - 0x18)
#define alc880_is_input_pin(nid) ((nid) >= 0x18)
#define alc880_input_pin_idx(nid) ((nid) - 0x18)
#define alc880_idx_to_dac(nid) ((nid) + 0x02)
#define alc880_dac_to_idx(nid) ((nid) - 0x02)
#define alc880_idx_to_mixer(nid) ((nid) + 0x0c)
#define alc880_idx_to_selector(nid) ((nid) + 0x10)
#define ALC880_PIN_CD_NID 0x1c
/* fill in the dac_nids table from the parsed pin configuration */
static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
hda_nid_t nid;
int assigned[4];
int i, j;
memset(assigned, 0, sizeof(assigned));
/* check the pins hardwired to audio widget */
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
if (alc880_is_fixed_pin(nid)) {
int idx = alc880_fixed_pin_idx(nid);
spec->multiout.dac_nids[i] = alc880_dac_to_idx(idx);
assigned[idx] = 1;
}
}
/* left pins can be connect to any audio widget */
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
if (alc880_is_fixed_pin(nid))
continue;
/* search for an empty channel */
for (j = 0; j < cfg->line_outs; j++) {
if (! assigned[j]) {
spec->multiout.dac_nids[i] = alc880_idx_to_dac(j);
assigned[j] = 1;
break;
}
}
}
spec->multiout.num_dacs = cfg->line_outs;
return 0;
}
/* add playback controls from the parsed DAC table */
static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
char name[32];
static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
hda_nid_t nid;
int i, err;
for (i = 0; i < cfg->line_outs; i++) {
if (! spec->multiout.dac_nids[i])
continue;
nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
if (i == 2) {
/* Center/LFE */
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume",
HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume",
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 1, 2, HDA_INPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 2, 2, HDA_INPUT))) < 0)
return err;
} else {
sprintf(name, "%s Playback Volume", chname[i]);
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
sprintf(name, "%s Playback Switch", chname[i]);
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
return err;
}
}
return 0;
}
/* add playback controls for HP output */
static int alc880_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
{
hda_nid_t nid;
int err;
if (! pin)
return 0;
if (alc880_is_fixed_pin(pin)) {
nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
if (! spec->multiout.dac_nids[0]) {
/* use this as the primary output */
spec->multiout.dac_nids[0] = nid;
if (! spec->multiout.num_dacs)
spec->multiout.num_dacs = 1;
} else
/* specify the DAC as the extra HP output */
spec->multiout.hp_nid = nid;
/* control HP volume/switch on the output mixer amp */
nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Headphone Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
return err;
} else if (alc880_is_multi_pin(pin)) {
/* set manual connection */
if (! spec->multiout.dac_nids[0]) {
/* use this as the primary output */
spec->multiout.dac_nids[0] = alc880_idx_to_dac(alc880_multi_pin_idx(pin));
if (! spec->multiout.num_dacs)
spec->multiout.num_dacs = 1;
}
/* we have only a switch on HP-out PIN */
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0)
return err;
}
return 0;
}
/* create input playback/capture controls for the given pin */
static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname)
{
char name[32];
int err, idx;
sprintf(name, "%s Playback Volume", ctlname);
idx = alc880_input_pin_idx(pin);
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
return err;
sprintf(name, "%s Playback Switch", ctlname);
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
return err;
return 0;
}
/* create playback/capture controls for input pins */
static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
static char *labels[AUTO_PIN_LAST] = {
"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
};
struct hda_input_mux *imux = &spec->private_imux;
int i, err;
for (i = 0; i < AUTO_PIN_LAST; i++) {
if (alc880_is_input_pin(cfg->input_pins[i])) {
err = new_analog_input(spec, cfg->input_pins[i], labels[i]);
if (err < 0)
return err;
imux->items[imux->num_items].label = labels[i];
imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]);
imux->num_items++;
}
}
return 0;
}
static void alc880_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type,
int dac_idx)
{
/* set as output */
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
/* need the manual connection? */
if (alc880_is_multi_pin(nid)) {
struct alc_spec *spec = codec->spec;
int idx = alc880_multi_pin_idx(nid);
snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
AC_VERB_SET_CONNECT_SEL,
alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
}
}
static void alc880_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < spec->autocfg.line_outs; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
alc880_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
}
}
static void alc880_auto_init_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
pin = spec->autocfg.hp_pin;
if (pin) /* connect to front */
alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
}
static void alc880_auto_init_analog_input(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if (alc880_is_input_pin(nid)) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
if (nid != ALC880_PIN_CD_NID)
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_MUTE);
}
}
}
/* parse the BIOS configuration and set up the alc_spec */
/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
static int alc880_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
return err;
if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0)
return err;
if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
return 0; /* can't find valid BIOS pin config */
if ((err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = alc880_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
(err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = ALC880_DIGIN_NID;
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
spec->init_verbs[spec->num_init_verbs++] = alc880_volume_init_verbs;
spec->input_mux = &spec->private_imux;
return 1;
}
/* init callback for auto-configuration model -- overriding the default init */
static int alc880_auto_init(struct hda_codec *codec)
{
alc_init(codec);
alc880_auto_init_multi_out(codec);
alc880_auto_init_hp_out(codec);
alc880_auto_init_analog_input(codec);
return 0;
}
/*
* OK, here we have finally the patch for ALC880
*/
static int patch_alc880(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
const struct alc_config_preset *preset;
int i, err;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
......@@ -2076,30 +2079,52 @@ static int patch_alc880(struct hda_codec *codec)
board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl);
if (board_config < 0 || board_config >= ALC880_MODEL_LAST) {
snd_printd(KERN_INFO "hda_codec: Unknown model for ALC880\n");
board_config = ALC880_3ST;
printk(KERN_INFO "hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...\n");
board_config = ALC880_AUTO;
}
preset = &alc880_presets[board_config];
spec->mixers[spec->num_mixers] = preset->mixers;
snd_assert(spec->mixers[0], kfree(spec);return -EINVAL);
spec->num_mixers++;
/* some MBs need GPIO setup */
if (preset->gpio_payload) {
/* Enable mask and set output */
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_MASK, preset->gpio_payload);
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_DIRECTION, preset->gpio_payload);
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_DATA, preset->gpio_payload);
if (board_config == ALC880_AUTO) {
/* automatic parse from the BIOS config */
err = alc880_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
} else if (! err) {
printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...\n");
board_config = ALC880_3ST;
}
}
spec->front_panel = preset->front_panel;
spec->init_verbs = preset->init_verbs;
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
if (board_config != ALC880_AUTO) {
/* set up from the preset table */
const struct alc_config_preset *preset;
preset = &alc880_presets[board_config];
for (i = 0; preset->mixers[i]; i++) {
snd_assert(spec->num_mixers < ARRAY_SIZE(spec->mixers), break);
spec->mixers[spec->num_mixers++] = preset->mixers[i];
}
for (i = 0; preset->init_verbs[i]; i++) {
snd_assert(spec->num_init_verbs < ARRAY_SIZE(spec->init_verbs), break);
spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
}
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = preset->num_dacs;
spec->multiout.dac_nids = preset->dac_nids;
spec->multiout.dig_out_nid = preset->dig_out_nid;
spec->multiout.hp_nid = preset->hp_nid;
spec->input_mux = preset->input_mux;
spec->num_adc_nids = preset->num_adc_nids;
spec->adc_nids = preset->adc_nids;
}
spec->stream_name_analog = "ALC880 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
......@@ -2109,26 +2134,64 @@ static int patch_alc880(struct hda_codec *codec)
spec->stream_digital_playback = &alc880_pcm_digital_playback;
spec->stream_digital_capture = &alc880_pcm_digital_capture;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = preset->num_dacs;
spec->multiout.dac_nids = preset->adc_nids;
spec->multiout.dig_out_nid = preset->dig_out_nid;
spec->multiout.hp_nid = preset->hp_nid;
spec->input_mux = preset->input_mux;
spec->num_adc_nids = preset->num_adc_nids;
spec->adc_nids = preset->adc_nids;
if (! spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = snd_hda_param_read(codec, alc880_adc_nids[0],
AC_PAR_AUDIO_WIDGET_CAP);
wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc880_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
spec->mixers[spec->num_mixers] = alc880_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc880_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
spec->mixers[spec->num_mixers] = alc880_capture_mixer;
spec->num_mixers++;
}
}
codec->patch_ops = alc_patch_ops;
if (board_config == ALC880_AUTO)
codec->patch_ops.init = alc880_auto_init;
return 0;
}
/*
* ALC260 support
*/
static hda_nid_t alc260_dac_nids[1] = {
/* front */
0x02,
};
static hda_nid_t alc260_adc_nids[1] = {
/* ADC0 */
0x04,
};
static hda_nid_t alc260_hp_adc_nids[1] = {
/* ADC1 */
0x05,
};
#define ALC260_DIGOUT_NID 0x03
#define ALC260_DIGIN_NID 0x06
static struct hda_input_mux alc260_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
/*
* This is just place-holder, so there's something for alc_build_pcms to look
* at when it calculates the maximum number of channels. ALC260 has no mixer
......@@ -2139,7 +2202,7 @@ static struct alc_channel_mode alc260_modes[1] = {
{ 2, NULL },
};
snd_kcontrol_new_t alc260_base_mixer[] = {
static snd_kcontrol_new_t alc260_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
......@@ -2168,7 +2231,7 @@ snd_kcontrol_new_t alc260_base_mixer[] = {
{ } /* end */
};
snd_kcontrol_new_t alc260_hp_mixer[] = {
static snd_kcontrol_new_t alc260_hp_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
......@@ -2260,14 +2323,12 @@ static struct hda_pcm_stream alc260_pcm_analog_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
.nid = 0x2,
};
static struct hda_pcm_stream alc260_pcm_analog_capture = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
.nid = 0x4,
};
static struct hda_board_config alc260_cfg_tbl[] = {
......@@ -2296,7 +2357,7 @@ static int patch_alc260(struct hda_codec *codec)
switch (board_config) {
case ALC260_HP:
spec->mixers[spec->num_mixers] = alc260_base_mixer;
spec->mixers[spec->num_mixers] = alc260_hp_mixer;
spec->num_mixers++;
break;
default:
......@@ -2305,7 +2366,9 @@ static int patch_alc260(struct hda_codec *codec)
break;
}
spec->init_verbs = alc260_init_verbs;
spec->init_verbs[0] = alc260_init_verbs;
spec->num_init_verbs = 1;
spec->channel_mode = alc260_modes;
spec->num_channel_mode = ARRAY_SIZE(alc260_modes);
......@@ -2320,7 +2383,6 @@ static int patch_alc260(struct hda_codec *codec)
spec->input_mux = &alc260_capture_source;
switch (board_config) {
case ALC260_HP:
spec->stream_analog_capture->nid = 5;
spec->num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids);
spec->adc_nids = alc260_hp_adc_nids;
break;
......@@ -2335,6 +2397,7 @@ static int patch_alc260(struct hda_codec *codec)
return 0;
}
/*
* ALC882 support
*
......@@ -2463,42 +2526,35 @@ static struct hda_verb alc882_init_verbs[] = {
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Front Pin: to output mode */
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Front Pin: mute amp left and right (no volume) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* select Front mixer (0x0c, index 0) */
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Rear Pin */
/* Rear Pin: output 1 (0x0d) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Rear Pin: mute amp left and right (no volume) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* select Rear mixer (0x0d, index 1) */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
/* CLFE Pin */
/* CLFE Pin: output 2 (0x0e) */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* CLFE Pin: mute amp left and right (no volume) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* select CLFE mixer (0x0e, index 2) */
{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
/* Side Pin */
/* Side Pin: output 3 (0x0f) */
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Side Pin: mute amp left and right (no volume) */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* select Side mixer (0x0f, index 3) */
{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
/* Headphone Pin */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
/* Headphone Pin: mute amp left and right (no volume) */
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* select Front mixer (0x0c, index 0) */
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Mic (rear) pin widget for input and vref at 80% */
/* Mic (rear) pin: input vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* Front Mic pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Front Mic pin: input vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* Line In pin widget for input */
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Line In pin: input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Line-2 In: Headphone output (output 0 - 0x0c) */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
......@@ -2548,8 +2604,9 @@ static int patch_alc882(struct hda_codec *codec)
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
spec->dig_in_nid = ALC880_DIGIN_NID;
spec->front_panel = 1;
spec->init_verbs = alc882_init_verbs;
spec->init_verbs[0] = alc882_init_verbs;
spec->num_init_verbs = 1;
spec->channel_mode = alc882_ch_modes;
spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment