atm: [fore200e] convert to use request_firmware()

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/atm/Kconfig

@@ -325,81 +325,22 @@ config ATM_IA_DEBUG
 	  speed of the driver, and the size of your syslog files! When
 	  inactive, they will have only a modest impact on performance.
 
-config ATM_FORE200E_MAYBE
+config ATM_FORE200E
 	tristate "FORE Systems 200E-series"
-	depends on PCI || SBUS
+	depends on (PCI || SBUS)
+	select FW_LOADER
 	---help---
 	  This is a driver for the FORE Systems 200E-series ATM adapter
 	  cards. It simultaneously supports PCA-200E and SBA-200E models
 	  on PCI and SBUS hosts. Say Y (or M to compile as a module
 	  named fore_200e) here if you have one of these ATM adapters.
 
-	  Note that the driver will actually be compiled only if you
-	  additionally enable the support for PCA-200E and/or SBA-200E
-	  cards.
-
 	  See the file <file:Documentation/networking/fore200e.txt> for
 	  further details.
 
-config ATM_FORE200E_PCA
-	bool "PCA-200E support"
-	depends on ATM_FORE200E_MAYBE && PCI
-	help
-	  Say Y here if you want your PCA-200E cards to be probed.
-
-config ATM_FORE200E_PCA_DEFAULT_FW
-	bool "Use default PCA-200E firmware (normally enabled)"
-	depends on ATM_FORE200E_PCA
-	help
-	  Use the default PCA-200E firmware data shipped with the driver.
-
-	  Normal users do not have to deal with the firmware stuff, so
-	  they should say Y here.
-
-config ATM_FORE200E_PCA_FW
-	string "Pathname of user-supplied binary firmware"
-	depends on ATM_FORE200E_PCA && !ATM_FORE200E_PCA_DEFAULT_FW
-	default ""
-	help
-	  This defines the pathname of an alternative PCA-200E binary
-	  firmware image supplied by the user. This pathname may be
-	  absolute or relative to the drivers/atm directory.
-
-	  The driver comes with an adequate firmware image, so normal users do
-	  not have to supply an alternative one. They just say Y to "Use
-	  default PCA-200E firmware" instead.
-
-config ATM_FORE200E_SBA
-	bool "SBA-200E support"
-	depends on ATM_FORE200E_MAYBE && SBUS
-	help
-	  Say Y here if you want your SBA-200E cards to be probed.
-
-config ATM_FORE200E_SBA_DEFAULT_FW
-	bool "Use default SBA-200E firmware (normally enabled)"
-	depends on ATM_FORE200E_SBA
-	help
-	  Use the default SBA-200E firmware data shipped with the driver.
-
-	  Normal users do not have to deal with the firmware stuff, so
-	  they should say Y here.
-
-config ATM_FORE200E_SBA_FW
-	string "Pathname of user-supplied binary firmware"
-	depends on ATM_FORE200E_SBA && !ATM_FORE200E_SBA_DEFAULT_FW
-	default ""
-	help
-	  This defines the pathname of an alternative SBA-200E binary
-	  firmware image supplied by the user. This pathname may be
-	  absolute or relative to the drivers/atm directory.
-
-	  The driver comes with an adequate firmware image, so normal users do
-	  not have to supply an alternative one. They just say Y to "Use
-	  default SBA-200E firmware", above.
-
 config ATM_FORE200E_USE_TASKLET
 	bool "Defer interrupt work to a tasklet"
-	depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
+	depends on ATM_FORE200E
 	default n
 	help
 	  This defers work to be done by the interrupt handler to a
@@ -408,7 +349,7 @@ config ATM_FORE200E_USE_TASKLET
 
 config ATM_FORE200E_TX_RETRY
 	int "Maximum number of tx retries"
-	depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
+	depends on ATM_FORE200E
 	default "16"
 	---help---
 	  Specifies the number of times the driver attempts to transmit
@@ -425,7 +366,7 @@ config ATM_FORE200E_TX_RETRY
 
 config ATM_FORE200E_DEBUG
 	int "Debugging level (0-3)"
-	depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
+	depends on ATM_FORE200E
 	default "0"
 	help
 	  Specifies the level of debugging messages issued by the driver.
@@ -436,12 +377,6 @@ config ATM_FORE200E_DEBUG
 	  the performances of the driver, and the size of your syslog files!
 	  Keep the debugging level to 0 during normal operations.
 
-config ATM_FORE200E
-	tristate
-	depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
-	default m if ATM_FORE200E_MAYBE!=y
-	default y if ATM_FORE200E_MAYBE=y
-
 config ATM_HE
 	tristate "ForeRunner HE Series"
 	depends on PCI

drivers/atm/Makefile

@@ -3,14 +3,6 @@
 #
 
 fore_200e-objs	:= fore200e.o
-hostprogs-y	:= fore200e_mkfirm
-
-# Files generated that shall be removed upon make clean
-clean-files := atmsar11.bin atmsar11.bin1 atmsar11.bin2 pca200e.bin \
-	pca200e.bin1 pca200e.bin2 pca200e_ecd.bin pca200e_ecd.bin1 \
-	pca200e_ecd.bin2 sba200e_ecd.bin sba200e_ecd.bin1 sba200e_ecd.bin2
-# Firmware generated that shall be removed upon make clean
-clean-files += fore200e_pca_fw.c fore200e_sba_fw.c
 
 obj-$(CONFIG_ATM_ZATM)		+= zatm.o uPD98402.o
 obj-$(CONFIG_ATM_NICSTAR)	+= nicstar.o
@@ -36,38 +28,7 @@ obj-$(CONFIG_ATM_TCP)		+= atmtcp.o
 obj-$(CONFIG_ATM_FIRESTREAM)	+= firestream.o
 obj-$(CONFIG_ATM_LANAI)		+= lanai.o
 
-ifeq ($(CONFIG_ATM_FORE200E_PCA),y)
-  fore_200e-objs		+= fore200e_pca_fw.o
-  # guess the target endianess to choose the right PCA-200E firmware image
-  ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y)
-    byteorder.h			:= include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h
-    CONFIG_ATM_FORE200E_PCA_FW	:= $(obj)/pca200e$(if $(shell $(CC) $(KBUILD_CPPFLAGS) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2)
-  endif
-endif
-
-ifeq ($(CONFIG_ATM_FORE200E_SBA),y)
-  fore_200e-objs		+= fore200e_sba_fw.o
-  ifeq ($(CONFIG_ATM_FORE200E_SBA_DEFAULT_FW),y)
-    CONFIG_ATM_FORE200E_SBA_FW	:= $(obj)/sba200e_ecd.bin2
-  endif
-endif
 obj-$(CONFIG_ATM_HE)		+= he.o
 ifeq ($(CONFIG_ATM_HE_USE_SUNI),y)
   obj-$(CONFIG_ATM_HE)		+= suni.o
 endif
-
-# FORE Systems 200E-series firmware magic
-$(obj)/fore200e_pca_fw.c: $(patsubst "%", %, $(CONFIG_ATM_FORE200E_PCA_FW)) \
-			  $(obj)/fore200e_mkfirm
-	$(obj)/fore200e_mkfirm -k -b _fore200e_pca_fw \
-	  -i $(CONFIG_ATM_FORE200E_PCA_FW) -o $@
-
-$(obj)/fore200e_sba_fw.c: $(patsubst "%", %, $(CONFIG_ATM_FORE200E_SBA_FW)) \
-			  $(obj)/fore200e_mkfirm
-	$(obj)/fore200e_mkfirm -k -b _fore200e_sba_fw \
-	  -i $(CONFIG_ATM_FORE200E_SBA_FW) -o $@
-
-# deal with the various suffixes of the binary firmware images
-$(obj)/%.bin $(obj)/%.bin1 $(obj)/%.bin2: $(src)/%.data
-	objcopy -Iihex $< -Obinary $@.gz
-	gzip -n -df $@.gz

drivers/atm/fore200e.c

@@ -36,6 +36,7 @@
 #include <linux/atm_suni.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/firmware.h>
 #include <asm/io.h>
 #include <asm/string.h>
 #include <asm/page.h>
@@ -45,7 +46,7 @@
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
 
-#ifdef CONFIG_ATM_FORE200E_SBA
+#ifdef CONFIG_SBUS
 #include <asm/idprom.h>
 #include <asm/sbus.h>
 #include <asm/openprom.h>
@@ -382,9 +383,6 @@ fore200e_shutdown(struct fore200e* fore200e)
     case FORE200E_STATE_START_FW:
 	/* nothing to do for that state */
 
-    case FORE200E_STATE_LOAD_FW:
-	/* nothing to do for that state */
-
     case FORE200E_STATE_RESET:
 	/* nothing to do for that state */
 
@@ -405,7 +403,7 @@ fore200e_shutdown(struct fore200e* fore200e)
 }
 
 
-#ifdef CONFIG_ATM_FORE200E_PCA
+#ifdef CONFIG_PCI
 
 static u32 fore200e_pca_read(volatile u32 __iomem *addr)
 {
@@ -658,10 +656,10 @@ fore200e_pca_proc_read(struct fore200e* fore200e, char *page)
 		   pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn));
 }
 
-#endif /* CONFIG_ATM_FORE200E_PCA */
+#endif /* CONFIG_PCI */
 
 
-#ifdef CONFIG_ATM_FORE200E_SBA
+#ifdef CONFIG_SBUS
 
 static u32
 fore200e_sba_read(volatile u32 __iomem *addr)
@@ -907,7 +905,7 @@ fore200e_sba_proc_read(struct fore200e* fore200e, char *page)
 
     return sprintf(page, "   SBUS slot/device:\t\t%d/'%s'\n", sbus_dev->slot, sbus_dev->prom_name);
 }
-#endif /* CONFIG_ATM_FORE200E_SBA */
+#endif /* CONFIG_SBUS */
 
 
 static void
@@ -2552,13 +2550,53 @@ fore200e_monitor_puts(struct fore200e* fore200e, char* str)
     while (fore200e_monitor_getc(fore200e) >= 0);
 }
 
+#ifdef __LITTLE_ENDIAN
+#define FW_EXT ".bin"
+#else
+#define FW_EXT "_ecd.bin2"
+#endif
 
 static int __devinit
-fore200e_start_fw(struct fore200e* fore200e)
-{
-    int               ok;
-    char              cmd[ 48 ];
-    struct fw_header* fw_header = (struct fw_header*) fore200e->bus->fw_data;
+fore200e_load_and_start_fw(struct fore200e* fore200e)
+{
+    const struct firmware *firmware;
+    struct device *device;
+    struct fw_header *fw_header;
+    u32 *fw_data, fw_size;
+    u32 __iomem *load_addr;
+    char buf[48];
+    int err = -ENODEV;
+
+    if (strcmp(fore200e->bus->model_name, "PCA-200E") == 0)
+	device = &((struct pci_dev *) fore200e->bus_dev)->dev;
+#ifdef CONFIG_SBUS
+    else if (strcmp(fore200e->bus->model_name, "SBA-200E") == 0)
+	device = &((struct sbus_dev *) fore200e->bus_dev)->ofdev.dev;
+#endif
+    else
+	return err;
+
+    sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT);
+    if (request_firmware(&firmware, buf, device) == 1) {
+	printk(FORE200E "missing %s firmware image\n", fore200e->bus->model_name);
+	return err;
+    }
+
+    fw_data = (u32 *) firmware->data;
+    fw_size = firmware->size / sizeof(u32);
+    fw_header = (struct fw_header *) firmware->data;
+    load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset);
+
+    DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n",
+	    fore200e->name, load_addr, fw_size);
+
+    if (le32_to_cpu(fw_header->magic) != FW_HEADER_MAGIC) {
+	printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name);
+	goto release;
+    }
+
+    for (; fw_size--; fw_data++, load_addr++)
+	fore200e->bus->write(le32_to_cpu(*fw_data), load_addr);
 
     DPRINTK(2, "device %s firmware being started\n", fore200e->name);
 
@@ -2567,46 +2605,22 @@ fore200e_start_fw(struct fore200e* fore200e)
     fore200e_spin(100);
 #endif
 
-    sprintf(cmd, "\rgo %x\r", le32_to_cpu(fw_header->start_offset));
+    sprintf(buf, "\rgo %x\r", le32_to_cpu(fw_header->start_offset));
+    fore200e_monitor_puts(fore200e, buf);
 
-    fore200e_monitor_puts(fore200e, cmd);
-
-    ok = fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_CP_RUNNING, 1000);
-    if (ok == 0) {
+    if (fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_CP_RUNNING, 1000) == 0) {
 	printk(FORE200E "device %s firmware didn't start\n", fore200e->name);
-	return -ENODEV;
+	goto release;
     }
 
     printk(FORE200E "device %s firmware started\n", fore200e->name);
 
     fore200e->state = FORE200E_STATE_START_FW;
-    return 0;
-}
-
-
-static int __devinit
-fore200e_load_fw(struct fore200e* fore200e)
-{
-    __le32* fw_data = (__le32*) fore200e->bus->fw_data;
-    u32  fw_size = (u32) *fore200e->bus->fw_size / sizeof(u32);
-
-    struct fw_header* fw_header = (struct fw_header*) fw_data;
-
-    u32 __iomem *load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset);
-
-    DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n", 
-	    fore200e->name, load_addr, fw_size);
-
-    if (le32_to_cpu(fw_header->magic) != FW_HEADER_MAGIC) {
-	printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name);
-	return -ENODEV;
-    }
+    err = 0;
 
-    for (; fw_size--; fw_data++, load_addr++)
-	fore200e->bus->write(le32_to_cpu(*fw_data), load_addr);
-
-    fore200e->state = FORE200E_STATE_LOAD_FW;
-    return 0;
+release:
+    release_firmware(firmware);
+    return err;
 }
 
 
@@ -2652,10 +2666,7 @@ fore200e_init(struct fore200e* fore200e)
     if (fore200e_reset(fore200e, 1) < 0)
 	return -ENODEV;
 
-    if (fore200e_load_fw(fore200e) < 0)
-	return -ENODEV;
-
-    if (fore200e_start_fw(fore200e) < 0)
+    if (fore200e_load_and_start_fw(fore200e) < 0)
 	return -ENODEV;
 
     if (fore200e_initialize(fore200e) < 0)
@@ -2689,7 +2700,7 @@ fore200e_init(struct fore200e* fore200e)
     return 0;
 }
 
-#ifdef CONFIG_ATM_FORE200E_PCA
+#ifdef CONFIG_PCI
 static int __devinit
 fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
 {
@@ -2804,7 +2815,7 @@ fore200e_module_init(void)
 	}
     }
 
-#ifdef CONFIG_ATM_FORE200E_PCA
+#ifdef CONFIG_PCI
     if (!pci_register_driver(&fore200e_pca_driver))
 	return 0;
 #endif
@@ -2821,7 +2832,7 @@ fore200e_module_cleanup(void)
 {
     struct fore200e *fore200e, *next;
 
-#ifdef CONFIG_ATM_FORE200E_PCA
+#ifdef CONFIG_PCI
     pci_unregister_driver(&fore200e_pca_driver);
 #endif
 
@@ -3140,19 +3151,9 @@ static const struct atmdev_ops fore200e_ops =
 };
 
 
-#ifdef CONFIG_ATM_FORE200E_PCA
-extern const unsigned char _fore200e_pca_fw_data[];
-extern const unsigned int  _fore200e_pca_fw_size;
-#endif
-#ifdef CONFIG_ATM_FORE200E_SBA
-extern const unsigned char _fore200e_sba_fw_data[];
-extern const unsigned int  _fore200e_sba_fw_size;
-#endif
-
 static const struct fore200e_bus fore200e_bus[] = {
-#ifdef CONFIG_ATM_FORE200E_PCA
+#ifdef CONFIG_PCI
     { "PCA-200E", "pca200e", 32, 4, 32, 
-      _fore200e_pca_fw_data, &_fore200e_pca_fw_size,
       fore200e_pca_read,
       fore200e_pca_write,
       fore200e_pca_dma_map,
@@ -3173,9 +3174,8 @@ static const struct fore200e_bus fore200e_bus[] = {
       fore200e_pca_proc_read,
     },
 #endif
-#ifdef CONFIG_ATM_FORE200E_SBA
+#ifdef CONFIG_SBUS
     { "SBA-200E", "sba200e", 32, 64, 32,
-      _fore200e_sba_fw_data, &_fore200e_sba_fw_size,
       fore200e_sba_read,
       fore200e_sba_write,
       fore200e_sba_dma_map,

drivers/atm/fore200e.h

@@ -754,7 +754,6 @@ typedef enum fore200e_state {
     FORE200E_STATE_CONFIGURE,     /* bus interface configured          */
     FORE200E_STATE_MAP,           /* board space mapped in host memory */
     FORE200E_STATE_RESET,         /* board resetted                    */
-    FORE200E_STATE_LOAD_FW,       /* firmware loaded                   */
     FORE200E_STATE_START_FW,      /* firmware started                  */
     FORE200E_STATE_INITIALIZE,    /* initialize command successful     */
     FORE200E_STATE_INIT_CMDQ,     /* command queue initialized         */
@@ -803,8 +802,6 @@ typedef struct fore200e_bus {
     int                  descr_alignment;     /* tpd/rpd/rbd DMA alignment requirement  */
     int                  buffer_alignment;    /* rx buffers DMA alignment requirement   */
     int                  status_alignment;    /* status words DMA alignment requirement */
-    const unsigned char* fw_data;             /* address of firmware data start         */
-    const unsigned int*  fw_size;             /* address of firmware data size          */
     u32                  (*read)(volatile u32 __iomem *);
     void                 (*write)(u32, volatile u32 __iomem *);
     u32                  (*dma_map)(struct fore200e*, void*, int, int);

drivers/atm/fore200e_firmware_copyright

-
-These microcode data are placed under the terms of the GNU General Public License. 
-
-We would prefer you not to distribute modified versions of it and not to ask
-for assembly or other microcode source.
-
-Copyright (c) 1995-2000 FORE Systems, Inc., as an unpublished work.  This 
-notice does not imply unrestricted or public access to these materials which
-are a trade secret of FORE Systems, Inc. or its subsidiaries or affiliates 
-(together referred to as "FORE"), and which may not be reproduced, used, sold 
-or transferred to any third party without FORE's prior written consent.  All
-rights reserved.
-
-U.S. Government Restricted Rights.  If you are licensing the Software on 
-behalf of the U.S. Government ("Government"), the following provisions apply
-to you.  If the software is supplied to the Department of Defense ("DoD"), it 
-is classified as "Commercial Computer Software" under paragraph 252.227-7014
-of the DoD Supplement to the Federal Acquisition Regulations ("DFARS") (or any 
-successor regulations) and the Government is acquiring only the license
-rights granted herein (the license rights customarily provided to non-Government 
-users).  If the Software is supplied to any unit or agency of the Government
-other than the DoD, it is classified as "Restricted Computer Software" and
-the Government's rights in the Software are defined in paragraph 52.227-19 of
-the Federal Acquisition Regulations ("FAR") (or any successor regulations) or,
-in the cases of NASA, in paragraph 18.52.227-86 of the NASA Supplement to the FAR 
-(or any successor regulations).
-
-FORE Systems is a registered trademark, and ForeRunner, ForeRunnerLE, and 
-ForeThought are trademarks of FORE Systems, Inc.  All other brands or product 
-names are trademarks or registered trademarks of their respective holders.
-

drivers/atm/fore200e_mkfirm.c

-/*
-  mkfirm.c: generates a C readable file from a binary firmware image
-
-  Christophe Lizzi (lizzi@{csti.fr, cnam.fr}), June 1999.
-  
-  This software may be used and distributed according to the terms
-  of the GNU General Public License, incorporated herein by reference.
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <time.h>
-
-char* default_basename = "pca200e"; /* was initially written for the PCA-200E firmware */
-char* default_infname  = "<stdin>";
-char* default_outfname = "<stdout>";
-
-char* progname;
-int   verbose  = 0;
-int   inkernel = 0;
-
-
-void usage(void)
-{
-    fprintf(stderr,
-	    "%s: [-v] [-k] [-b basename ] [-i firmware.bin] [-o firmware.c]\n",
-	    progname);
-    exit(-1);
-}
-
-
-int main(int argc, char** argv)
-{
-    time_t   now;
-    char*    infname  = NULL;
-    char*    outfname = NULL;
-    char*    basename = NULL;
-    FILE*    infile;
-    FILE*    outfile;
-    unsigned firmsize;
-    int      c;
-
-    progname = *(argv++);
-    
-    while (argc > 1) {
-        if ((*argv)[0] == '-') {
-            switch ((*argv)[1]) {
-	    case 'i':
-		if (argc-- < 3)
-		    usage();
-		infname = *(++argv);
-		break;
-	    case 'o':
-		if (argc-- < 3)
-		    usage();
-		outfname = *(++argv);
-		break;
-	    case 'b':
-		if (argc-- < 3)
-		    usage();
-		basename = *(++argv);
-		break;
-	    case 'v':
-		verbose = 1;
-		break;
-	    case 'k':
-		inkernel = 1;
-		break;
-	    default:
-		usage();
-            }
-	}
-	else {
-	    usage();
-	}
-	argc--;
-        argv++;
-    }
-    
-    if (infname != NULL) {
-	infile = fopen(infname, "r");
-	if (infile == NULL) {
-	    fprintf(stderr, "%s: can't open %s for reading\n",
-		    progname, infname);
-	    exit(-2);
-	}
-    }
-    else {
-	infile = stdin;
-	infname = default_infname;
-    }
-
-    if (outfname) {
-	outfile = fopen(outfname, "w");
-	if (outfile == NULL) {
-	    fprintf(stderr, "%s: can't open %s for writing\n",
-		    progname, outfname);
-	    exit(-3);
-	}
-    }
-    else {
-	outfile = stdout;
-	outfname = default_outfname;
-    }
-
-    if (basename == NULL)
-	basename = default_basename;
-
-    if (verbose) {
-	fprintf(stderr, "%s: input file = %s\n", progname, infname );
-	fprintf(stderr, "%s: output file = %s\n", progname, outfname );
-	fprintf(stderr, "%s: firmware basename = %s\n", progname, basename );
-    }
-
-    time(&now);
-    fprintf(outfile, "/*\n  generated by %s from %s on %s"
-	    "  DO NOT EDIT!\n*/\n\n",
-	    progname, infname, ctime(&now));
-
-    if (inkernel)
-	fprintf(outfile, "#include <linux/init.h>\n\n" );
-    
-    /* XXX force 32 bit alignment? */
-    fprintf(outfile, "const unsigned char%s %s_data[] = {\n", 
-	    inkernel ? " __initdata" : "", basename );
-    
-    c = getc(infile);
-    fprintf(outfile,"\t0x%02x", c);
-    firmsize = 1;
-    
-    while ((c = getc(infile)) >= 0) {
-	
-	if (firmsize++ % 8)
-	    fprintf(outfile,", 0x%02x", c);
-	else
-	    fprintf(outfile,",\n\t0x%02x", c);
-    }
-
-    fprintf(outfile, "\n};\n\n");
-
-    fprintf(outfile, "const unsigned int%s %s_size = %u;\n",
-	    inkernel ? " __initdata" : "", basename, firmsize );
-
-    if (infile != stdin)
-	fclose(infile);
-    if (outfile != stdout)
-	fclose(outfile);
-
-    if(verbose)
-	fprintf(stderr, "%s: firmware size = %u\n", progname, firmsize);
-
-    exit(0);
-}