Skip to content

L
linux-davinci
Commit e63835b0 authored by Sujith's avatar Sujith Committed by John W. Linville
Browse files
Options

ath9k: Remove ath9k_rate_table 

Maintaining two sets of rate tables is redundant, remove one
and use struct ath_rate_table exclusively.
Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent a8efee4f
Expand all Show whitespace changes
Inline Side-by-side
Showing with 132 additions and 374 deletions
drivers/net/wireless/ath9k/ath9k.h
View file @ e63835b0
......@@ -401,22 +401,6 @@ enum ath9k_int {
ATH9K_INT_NOCARD = 0xffffffff
};
struct ath9k_rate_table {
int rateCount;
u8 rateCodeToIndex[256];
struct {
u8 valid;
u8 phy;
u32 rateKbps;
u8 rateCode;
u8 shortPreamble;
u8 dot11Rate;
u8 controlRate;
u16 lpAckDuration;
u16 spAckDuration;
} info[32];
};
#define ATH9K_RATESERIES_RTS_CTS 0x0001
#define ATH9K_RATESERIES_2040 0x0002
#define ATH9K_RATESERIES_HALFGI 0x0004
......@@ -828,6 +812,8 @@ struct chan_centers {
u16 ext_center;
};
struct ath_rate_table;
/* Helpers */
enum wireless_mode ath9k_hw_chan2wmode(struct ath_hal *ah,
......@@ -838,7 +824,7 @@ bool ath9k_get_channel_edges(struct ath_hal *ah,
u16 flags, u16 *low,
u16 *high);
u16 ath9k_hw_computetxtime(struct ath_hal *ah,
const struct ath9k_rate_table *rates,
struct ath_rate_table *rates,
u32 frameLen, u16 rateix,
bool shortPreamble);
u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags);
......@@ -883,12 +869,6 @@ void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore);
void ath9k_hw_beaconinit(struct ath_hal *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah,
const struct ath9k_beacon_state *bs);
/* Rate table */
const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah,
u32 mode);
/* HW Capabilities */
bool ath9k_hw_fill_cap_info(struct ath_hal *ah);
......
drivers/net/wireless/ath9k/beacon.c
View file @ e63835b0
......@@ -68,7 +68,7 @@ static void ath_beacon_setup(struct ath_softc *sc,
struct ath_hal *ah = sc->sc_ah;
struct ath_desc *ds;
struct ath9k_11n_rate_series series[4];
const struct ath9k_rate_table *rt;
struct ath_rate_table *rt;
int flags, antenna;
u8 rix, rate;
int ctsrate = 0;
......@@ -106,10 +106,10 @@ static void ath_beacon_setup(struct ath_softc *sc,
* XXX everything at min xmit rate
*/
rix = 0;
rt = sc->sc_currates;
rate = rt->info[rix].rateCode;
rt = sc->hw_rate_table[sc->sc_curmode];
rate = rt->info[rix].ratecode;
if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
rate |= rt->info[rix].shortPreamble;
rate |= rt->info[rix].short_preamble;
ath9k_hw_set11n_txdesc(ah, ds,
skb->len + FCS_LEN, /* frame length */
......
drivers/net/wireless/ath9k/core.c
View file @ e63835b0
......@@ -80,38 +80,9 @@ static u8 parse_mpdudensity(u8 mpdudensity)
/*
* Set current operating mode
*
* This function initializes and fills the rate table in the ATH object based
* on the operating mode.
*/
static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
{
const struct ath9k_rate_table *rt;
int i;
rt = ath9k_hw_getratetable(sc->sc_ah, mode);
BUG_ON(!rt);
memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap));
for (i = 0; i < 256; i++) {
u8 ix = rt->rateCodeToIndex[i];
if (ix == 0xff)
continue;
sc->sc_hwmap[i].ieeerate =
rt->info[ix].dot11Rate & IEEE80211_RATE_VAL;
sc->sc_hwmap[i].rateKbps = rt->info[ix].rateKbps;
if (rt->info[ix].shortPreamble ||
rt->info[ix].phy == PHY_OFDM) {
/* XXX: Handle this */
}
/* NB: this uses the last entry if the rate isn't found */
/* XXX beware of overlow */
}
sc->sc_currates = rt;
sc->sc_curmode = mode;
/*
* All protection frames are transmited at 2Mb/s for
......@@ -126,37 +97,36 @@ static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
*/
static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
{
struct ath_hal *ah = sc->sc_ah;
const struct ath9k_rate_table *rt = NULL;
struct ath_rate_table *rate_table = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_rate *rate;
int i, maxrates;
switch (band) {
case IEEE80211_BAND_2GHZ:
rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11G);
rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
break;
case IEEE80211_BAND_5GHZ:
rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11A);
rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
break;
default:
break;
}
if (rt == NULL)
if (rate_table == NULL)
return;
sband = &sc->sbands[band];
rate = sc->rates[band];
if (rt->rateCount > ATH_RATE_MAX)
if (rate_table->rate_cnt > ATH_RATE_MAX)
maxrates = ATH_RATE_MAX;
else
maxrates = rt->rateCount;
maxrates = rate_table->rate_cnt;
for (i = 0; i < maxrates; i++) {
rate[i].bitrate = rt->info[i].rateKbps / 100;
rate[i].hw_value = rt->info[i].rateCode;
rate[i].bitrate = rate_table->info[i].ratekbps / 100;
rate[i].hw_value = rate_table->info[i].ratecode;
sband->n_bitrates++;
DPRINTF(sc, ATH_DBG_CONFIG,
"%s: Rate: %2dMbps, ratecode: %2d\n",
......@@ -1000,12 +970,10 @@ int ath_init(u16 devid, struct ath_softc *sc)
/* Setup rate tables */
ath_rate_attach(sc);
ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
/* NB: setup here so ath_rate_update is happy */
ath_setcurmode(sc, ATH9K_MODE_11A);
/*
* Allocate hardware transmit queues: one queue for
* beacon frames and one data queue for each QoS
......@@ -1071,8 +1039,6 @@ int ath_init(u16 devid, struct ath_softc *sc)
sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR;
setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc);
ath_rate_attach(sc);
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_TKIP, NULL)) {
/*
......
drivers/net/wireless/ath9k/core.h
View file @ e63835b0
......@@ -858,12 +858,7 @@ struct ath_softc {
/* Rate */
struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
const struct ath9k_rate_table *sc_currates;
u8 sc_protrix; /* protection rate index */
struct {
u32 rateKbps; /* transfer rate in kbs */
u8 ieeerate; /* IEEE rate */
} sc_hwmap[256]; /* h/w rate ix mappings */
/* Channel, Band */
struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX];
......
drivers/net/wireless/ath9k/hw.c
View file @ e63835b0
......@@ -142,14 +142,14 @@ bool ath9k_get_channel_edges(struct ath_hal *ah,
}
u16 ath9k_hw_computetxtime(struct ath_hal *ah,
const struct ath9k_rate_table *rates,
struct ath_rate_table *rates,
u32 frameLen, u16 rateix,
bool shortPreamble)
{
u32 bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
u32 kbps;
kbps = rates->info[rateix].rateKbps;
kbps = rates->info[rateix].ratekbps;
if (kbps == 0)
return 0;
......@@ -157,7 +157,7 @@ u16 ath9k_hw_computetxtime(struct ath_hal *ah,
switch (rates->info[rateix].phy) {
case PHY_CCK:
phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
if (shortPreamble && rates->info[rateix].shortPreamble)
if (shortPreamble && rates->info[rateix].short_preamble)
phyTime >>= 1;
numBits = frameLen << 3;
txTime = CCK_SIFS_TIME + phyTime + ((numBits * 1000) / kbps);
......@@ -3190,190 +3190,6 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah,
}
/***************/
/* Rate tables */
/***************/
static struct ath9k_rate_table ar5416_11a_table = {
8,
{0},
{
{true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0},
{true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0},
{true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2},
{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2},
{true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4},
{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4},
{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4},
{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4}
},
};
static struct ath9k_rate_table ar5416_11b_table = {
4,
{0},
{
{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 1},
{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 1}
},
};
static struct ath9k_rate_table ar5416_11g_table = {
12,
{0},
{
{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2},
{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3},
{false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4},
{false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4},
{true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6},
{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6},
{true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8},
{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8},
{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8},
{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8}
},
};
static struct ath9k_rate_table ar5416_11ng_table = {
28,
{0},
{
{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2},
{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3},
{false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4},
{false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4},
{true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6},
{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6},
{true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8},
{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8},
{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8},
{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8},
{true, PHY_HT, 6500, 0x80, 0x00, 0, 4},
{true, PHY_HT, 13000, 0x81, 0x00, 1, 6},
{true, PHY_HT, 19500, 0x82, 0x00, 2, 6},
{true, PHY_HT, 26000, 0x83, 0x00, 3, 8},
{true, PHY_HT, 39000, 0x84, 0x00, 4, 8},
{true, PHY_HT, 52000, 0x85, 0x00, 5, 8},
{true, PHY_HT, 58500, 0x86, 0x00, 6, 8},
{true, PHY_HT, 65000, 0x87, 0x00, 7, 8},
{true, PHY_HT, 13000, 0x88, 0x00, 8, 4},
{true, PHY_HT, 26000, 0x89, 0x00, 9, 6},
{true, PHY_HT, 39000, 0x8a, 0x00, 10, 6},
{true, PHY_HT, 52000, 0x8b, 0x00, 11, 8},
{true, PHY_HT, 78000, 0x8c, 0x00, 12, 8},
{true, PHY_HT, 104000, 0x8d, 0x00, 13, 8},
{true, PHY_HT, 117000, 0x8e, 0x00, 14, 8},
{true, PHY_HT, 130000, 0x8f, 0x00, 15, 8},
},
};
static struct ath9k_rate_table ar5416_11na_table = {
24,
{0},
{
{true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0},
{true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0},
{true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2},
{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2},
{true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4},
{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4},
{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4},
{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4},
{true, PHY_HT, 6500, 0x80, 0x00, 0, 0},
{true, PHY_HT, 13000, 0x81, 0x00, 1, 2},
{true, PHY_HT, 19500, 0x82, 0x00, 2, 2},
{true, PHY_HT, 26000, 0x83, 0x00, 3, 4},
{true, PHY_HT, 39000, 0x84, 0x00, 4, 4},
{true, PHY_HT, 52000, 0x85, 0x00, 5, 4},
{true, PHY_HT, 58500, 0x86, 0x00, 6, 4},
{true, PHY_HT, 65000, 0x87, 0x00, 7, 4},
{true, PHY_HT, 13000, 0x88, 0x00, 8, 0},
{true, PHY_HT, 26000, 0x89, 0x00, 9, 2},
{true, PHY_HT, 39000, 0x8a, 0x00, 10, 2},
{true, PHY_HT, 52000, 0x8b, 0x00, 11, 4},
{true, PHY_HT, 78000, 0x8c, 0x00, 12, 4},
{true, PHY_HT, 104000, 0x8d, 0x00, 13, 4},
{true, PHY_HT, 117000, 0x8e, 0x00, 14, 4},
{true, PHY_HT, 130000, 0x8f, 0x00, 15, 4},
},
};
static void ath9k_hw_setup_rate_table(struct ath_hal *ah,
struct ath9k_rate_table *rt)
{
int i;
if (rt->rateCodeToIndex[0] != 0)
return;
for (i = 0; i < 256; i++)
rt->rateCodeToIndex[i] = (u8) -1;
for (i = 0; i < rt->rateCount; i++) {
u8 code = rt->info[i].rateCode;
u8 cix = rt->info[i].controlRate;
rt->rateCodeToIndex[code] = i;
rt->rateCodeToIndex[code | rt->info[i].shortPreamble] = i;
rt->info[i].lpAckDuration =
ath9k_hw_computetxtime(ah, rt,
WLAN_CTRL_FRAME_SIZE,
cix,
false);
rt->info[i].spAckDuration =
ath9k_hw_computetxtime(ah, rt,
WLAN_CTRL_FRAME_SIZE,
cix,
true);
}
}
const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah,
u32 mode)
{
struct ath9k_rate_table *rt;
switch (mode) {
case ATH9K_MODE_11A:
rt = &ar5416_11a_table;
break;
case ATH9K_MODE_11B:
rt = &ar5416_11b_table;
break;
case ATH9K_MODE_11G:
rt = &ar5416_11g_table;
break;
case ATH9K_MODE_11NG_HT20:
case ATH9K_MODE_11NG_HT40PLUS:
case ATH9K_MODE_11NG_HT40MINUS:
rt = &ar5416_11ng_table;
break;
case ATH9K_MODE_11NA_HT20:
case ATH9K_MODE_11NA_HT40PLUS:
case ATH9K_MODE_11NA_HT40MINUS:
rt = &ar5416_11na_table;
break;
default:
DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, "%s: invalid mode 0x%x\n",
__func__, mode);
return NULL;
}
ath9k_hw_setup_rate_table(ah, rt);
return rt;
}
/*******************/
/* HW Capabilities */
/*******************/
......
drivers/net/wireless/ath9k/main.c
View file @ e63835b0
......@@ -780,6 +780,8 @@ static int ath_attach(u16 devid, struct ath_softc *sc)
BIT(NL80211_IFTYPE_ADHOC);
hw->queues = 4;
hw->max_rates = 4;
hw->max_rate_tries = ATH_11N_TXMAXTRY;
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vap);
......
drivers/net/wireless/ath9k/rc.c
View file @ e63835b0
......@@ -25,6 +25,7 @@
static struct ath_rate_table ar5416_11na_ratetable = {
42,
{0},
{
{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
5400, 0x0b, 0x00, 12,
......@@ -168,6 +169,7 @@ static struct ath_rate_table ar5416_11na_ratetable = {
static struct ath_rate_table ar5416_11ng_ratetable = {
46,
{0},
{
{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 1000, /* 1 Mb */
900, 0x1b, 0x00, 2,
......@@ -315,6 +317,7 @@ static struct ath_rate_table ar5416_11ng_ratetable = {
static struct ath_rate_table ar5416_11a_ratetable = {
8,
{0},
{
{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
5400, 0x0b, 0x00, (0x80|12),
......@@ -348,6 +351,7 @@ static struct ath_rate_table ar5416_11a_ratetable = {
static struct ath_rate_table ar5416_11g_ratetable = {
12,
{0},
{
{ TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */
900, 0x1b, 0x00, 2,
......@@ -393,6 +397,7 @@ static struct ath_rate_table ar5416_11g_ratetable = {
static struct ath_rate_table ar5416_11b_ratetable = {
4,
{0},
{
{ TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */
900, 0x1b, 0x00, (0x80|2),
......@@ -1302,14 +1307,14 @@ static void ath_rc_update(struct ath_softc *sc,
if (final_ts_idx != 0) {
/* Process intermediate rates that failed.*/
for (series = 0; series < final_ts_idx ; series++) {
if (rates[series].count != 0) {
if (rates[series].count != 0 && (rates[series].idx >= 0)) {
flags = rates[series].flags;
/* If HT40 and we have switched mode from
* 40 to 20 => don't update */
if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
(ath_rc_priv->rc_phy_mode !=
(flags & IEEE80211_TX_RC_40_MHZ_WIDTH)))
(ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG))
return;
if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
(flags & IEEE80211_TX_RC_SHORT_GI))
rix = rate_table->info[
......@@ -1343,8 +1348,9 @@ static void ath_rc_update(struct ath_softc *sc,
flags = rates[series].flags;
/* If HT40 and we have switched mode from 40 to 20 => don't update */
if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
(ath_rc_priv->rc_phy_mode != (flags & IEEE80211_TX_RC_40_MHZ_WIDTH)))
(ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) {
return;
}
if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (flags & IEEE80211_TX_RC_SHORT_GI))
rix = rate_table->info[rates[series].idx].ht_index;
......@@ -1628,7 +1634,6 @@ static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta,
void *priv_sta)
{
struct ath_rate_node *rate_priv = priv_sta;
kfree(rate_priv);
}
......@@ -1644,6 +1649,35 @@ static struct rate_control_ops ath_rate_ops = {
.free_sta = ath_rate_free_sta,
};
static void ath_setup_rate_table(struct ath_softc *sc,
struct ath_rate_table *rate_table)
{
int i;
for (i = 0; i < 256; i++)
rate_table->rateCodeToIndex[i] = (u8)-1;
for (i = 0; i < rate_table->rate_cnt; i++) {
u8 code = rate_table->info[i].ratecode;
u8 cix = rate_table->info[i].ctrl_rate;
u8 sh = rate_table->info[i].short_preamble;
rate_table->rateCodeToIndex[code] = i;
rate_table->rateCodeToIndex[code | sh] = i;
rate_table->info[i].lpAckDuration =
ath9k_hw_computetxtime(sc->sc_ah, rate_table,
WLAN_CTRL_FRAME_SIZE,
cix,
false);
rate_table->info[i].spAckDuration =
ath9k_hw_computetxtime(sc->sc_ah, rate_table,
WLAN_CTRL_FRAME_SIZE,
cix,
true);
}
}
void ath_rate_attach(struct ath_softc *sc)
{
sc->hw_rate_table[ATH9K_MODE_11B] =
......@@ -1664,6 +1698,12 @@ void ath_rate_attach(struct ath_softc *sc)
&ar5416_11ng_ratetable;
sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] =
&ar5416_11ng_ratetable;
ath_setup_rate_table(sc, &ar5416_11b_ratetable);
ath_setup_rate_table(sc, &ar5416_11a_ratetable);
ath_setup_rate_table(sc, &ar5416_11g_ratetable);
ath_setup_rate_table(sc, &ar5416_11na_ratetable);
ath_setup_rate_table(sc, &ar5416_11ng_ratetable);
}
int ath_rate_control_register(void)
......@@ -1675,4 +1715,3 @@ void ath_rate_control_unregister(void)
{
ieee80211_rate_control_unregister(&ath_rate_ops);
}
drivers/net/wireless/ath9k/rc.h
View file @ e63835b0
......@@ -143,6 +143,7 @@ enum {
*/
struct ath_rate_table {
int rate_cnt;
u8 rateCodeToIndex[256];
struct {
int valid;
int valid_single_stream;
......@@ -160,6 +161,8 @@ struct ath_rate_table {
u8 sgi_index;
u8 ht_index;
u32 max_4ms_framelen;
u16 lpAckDuration;
u16 spAckDuration;
} info[RATE_TABLE_SIZE];
u32 probe_interval;
u32 rssi_reduce_interval;
......
drivers/net/wireless/ath9k/recv.c
View file @ e63835b0
......@@ -140,8 +140,9 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
struct ieee80211_rx_status *rx_status, bool *decrypt_error,
struct ath_softc *sc)
{
struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode];
struct ieee80211_hdr *hdr;
int ratekbps;
int ratekbps, rix;
u8 ratecode;
__le16 fc;
......@@ -196,7 +197,8 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
}
ratecode = ds->ds_rxstat.rs_rate;
ratekbps = sc->sc_hwmap[ratecode].rateKbps;
rix = rate_table->rateCodeToIndex[ratecode];
ratekbps = rate_table->info[rix].ratekbps;
/* HT rate */
if (ratecode & 0x80) {
......
drivers/net/wireless/ath9k/xmit.c
View file @ e63835b0
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment