Commit dede17b8 authored by Takashi Iwai's avatar Takashi Iwai

Merge branch 'fix/hda' into for-linus

parents f6450739 1a696978
......@@ -722,9 +722,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus,
chip->last_cmd[addr]);
chip->single_cmd = 1;
bus->response_reset = 0;
/* re-initialize CORB/RIRB */
/* release CORB/RIRB */
azx_free_cmd_io(chip);
azx_init_cmd_io(chip);
/* disable unsolicited responses */
azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL);
return -1;
}
......@@ -865,7 +866,9 @@ static int azx_reset(struct azx *chip)
}
/* Accept unsolicited responses */
azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL);
if (!chip->single_cmd)
azx_writel(chip, GCTL, azx_readl(chip, GCTL) |
ICH6_GCTL_UNSOL);
/* detect codecs */
if (!chip->codec_mask) {
......@@ -980,6 +983,7 @@ static void azx_init_chip(struct azx *chip)
azx_int_enable(chip);
/* initialize the codec command I/O */
if (!chip->single_cmd)
azx_init_cmd_io(chip);
/* program the position buffer */
......
......@@ -2325,6 +2325,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
CXT5066_LAPTOP),
SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
CXT5066_DELL_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
{}
};
......
......@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include <sound/jack.h>
......@@ -1693,6 +1694,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
"DFI LanParty", STAC_92HD71BXX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
"HP dv4-1222nr", STAC_HP_DV4_1222NR),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
......@@ -4665,6 +4668,26 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
}
}
static int hp_bseries_system(u32 subsystem_id)
{
switch (subsystem_id) {
case 0x103c307e:
case 0x103c307f:
case 0x103c3080:
case 0x103c3081:
case 0x103c1722:
case 0x103c1723:
case 0x103c1724:
case 0x103c1725:
case 0x103c1726:
case 0x103c1727:
case 0x103c1728:
case 0x103c1729:
return 1;
}
return 0;
}
#ifdef CONFIG_PROC_FS
static void stac92hd_proc_hook(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
......@@ -4754,6 +4777,11 @@ static int stac92xx_hp_check_power_status(struct hda_codec *codec,
else
spec->gpio_data |= spec->gpio_led; /* white */
if (hp_bseries_system(codec->subsystem_id)) {
/* LED state is inverted on these systems */
spec->gpio_data ^= spec->gpio_led;
}
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir,
spec->gpio_data);
......@@ -5243,6 +5271,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init;
unsigned int pin_cfg;
int err = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
......@@ -5426,6 +5455,45 @@ again:
break;
}
if (hp_bseries_system(codec->subsystem_id)) {
pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f);
if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT ||
get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER ||
get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) {
/* It was changed in the BIOS to just satisfy MS DTM.
* Lets turn it back into slaved HP
*/
pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE))
| (AC_JACK_HP_OUT <<
AC_DEFCFG_DEVICE_SHIFT);
pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC
| AC_DEFCFG_SEQUENCE)))
| 0x1f;
snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg);
}
}
if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) {
const struct dmi_device *dev = NULL;
while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
NULL, dev))) {
if (strcmp(dev->name, "HP_Mute_LED_1")) {
switch (codec->vendor_id) {
case 0x111d7608:
spec->gpio_led = 0x01;
break;
case 0x111d7600:
case 0x111d7601:
case 0x111d7602:
case 0x111d7603:
spec->gpio_led = 0x08;
break;
}
break;
}
}
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (spec->gpio_led) {
spec->gpio_mask |= spec->gpio_led;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment