[SCSI] mvsas: split driver into multiple files

Split mvsas driver into multiple source codes, based on the split
and function distribution found in Marvell's mvsas update.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/mvsas/Makefile

@@ -22,5 +22,6 @@
 # USA
 
 obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
-mvsas-y +=  mv_sas.o
-
+mvsas-y +=  mv_init.o  \
+           mv_sas.o   \
+           mv_64xx.o

drivers/scsi/mvsas/mv_64xx.c

+/*
+	mv_64xx.c - Marvell 88SE6440 SAS/SATA support
+
+	Copyright 2007 Red Hat, Inc.
+	Copyright 2008 Marvell. <kewei@marvell.com>
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License as
+	published by the Free Software Foundation; either version 2,
+	or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty
+	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+	See the GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public
+	License along with this program; see the file COPYING.	If not,
+	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+	MA 02139, USA.
+
+ */
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+void mvs_detect_porttype(struct mvs_info *mvi, int i)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+
+	/* TODO check & save device type */
+	reg = mr32(GBL_PORT_TYPE);
+
+	if (reg & MODE_SAS_SATA & (1 << i))
+		phy->phy_type |= PORT_TYPE_SAS;
+	else
+		phy->phy_type |= PORT_TYPE_SATA;
+}
+
+void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(PCS);
+	if (mvi->chip->n_phy <= 4)
+		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
+	else
+		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(PCS, tmp);
+}
+
+void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	/* workaround for SATA R-ERR, to ignore phy glitch */
+	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+	tmp &= ~(1 << 9);
+	tmp |= (1 << 10);
+	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+	/* enable retry 127 times */
+	mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
+
+	/* extend open frame timeout to max */
+	tmp = mvs_cr32(regs, CMD_SAS_CTL0);
+	tmp &= ~0xffff;
+	tmp |= 0x3fff;
+	mvs_cw32(regs, CMD_SAS_CTL0, tmp);
+
+	/* workaround for WDTIMEOUT , set to 550 ms */
+	mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
+
+	/* not to halt for different port op during wideport link change */
+	mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+	/* workaround for Seagate disk not-found OOB sequence, recv
+	 * COMINIT before sending out COMWAKE */
+	tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
+	tmp &= 0x0000ffff;
+	tmp |= 0x00fa0000;
+	mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
+
+	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+	tmp &= 0x1fffffff;
+	tmp |= (2U << 29);	/* 8 ms retry */
+	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+	/* TEST - for phy decoding error, adjust voltage levels */
+	mw32(P0_VSR_ADDR + 0, 0x8);
+	mw32(P0_VSR_DATA + 0, 0x2F0);
+
+	mw32(P0_VSR_ADDR + 8, 0x8);
+	mw32(P0_VSR_DATA + 8, 0x2F0);
+
+	mw32(P0_VSR_ADDR + 16, 0x8);
+	mw32(P0_VSR_DATA + 16, 0x2F0);
+
+	mw32(P0_VSR_ADDR + 24, 0x8);
+	mw32(P0_VSR_DATA + 24, 0x2F0);
+
+}
+
+void mvs_hba_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(GBL_CTL);
+
+	mw32(GBL_CTL, tmp | INT_EN);
+}
+
+void mvs_hba_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(GBL_CTL);
+
+	mw32(GBL_CTL, tmp & ~INT_EN);
+}
+
+void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, offs;
+	u8 *tfs = &port->taskfileset;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+	if (*tfs < 16) {
+		tmp = mr32(PCS);
+		mw32(PCS, tmp & ~offs);
+	} else {
+		tmp = mr32(CTL);
+		mw32(CTL, tmp & ~offs);
+	}
+
+	tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
+	if (tmp)
+		mw32(INT_STAT_SRS, tmp);
+
+	*tfs = MVS_ID_NOT_MAPPED;
+}
+
+u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
+{
+	int i;
+	u32 tmp, offs;
+	void __iomem *regs = mvi->regs;
+
+	if (port->taskfileset != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	tmp = mr32(PCS);
+
+	for (i = 0; i < mvi->chip->srs_sz; i++) {
+		if (i == 16)
+			tmp = mr32(CTL);
+		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+		if (!(tmp & offs)) {
+			port->taskfileset = i;
+
+			if (i < 16)
+				mw32(PCS, tmp | offs);
+			else
+				mw32(CTL, tmp | offs);
+			tmp = mr32(INT_STAT_SRS) & (1U << i);
+			if (tmp)
+				mw32(INT_STAT_SRS, tmp);
+			return 0;
+		}
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+

drivers/scsi/mvsas/mv_64xx.h

+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS	= 0x15C,
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
+	MVS_P4_INT_STAT		= 0x200, /* Port 4 interrupt status */
+	MVS_P4_INT_MASK		= 0x204, /* Port 4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
+	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
+
+	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
+	MVS_P4_CFG_ADDR		= 0x230, /* Port 4 config address */
+	MVS_P4_CFG_DATA		= 0x234, /* Port 4 config data */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
+	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
+	MVS_P4_VSR_ADDR		= 0x250, /* port 4 VSR addr */
+	MVS_P4_VSR_DATA		= 0x254, /* port 4 VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0xE8,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01, /* phy tx */
+	VSR_PHY_MODE2		= 0x02, /* tx scc */
+	VSR_PHY_MODE3		= 0x03, /* pll */
+	VSR_PHY_MODE4		= 0x04, /* VCO */
+	VSR_PHY_MODE5		= 0x05, /* Rx */
+	VSR_PHY_MODE6		= 0x06, /* CDR */
+	VSR_PHY_MODE7		= 0x07, /* Impedance */
+	VSR_PHY_MODE8		= 0x08, /* Voltage */
+	VSR_PHY_MODE9		= 0x09, /* Test */
+	VSR_PHY_MODE10		= 0x0A, /* Power */
+	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
+};
+
+struct mvs_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	__le32			reserved;
+	__le32			len;		/* 16-bit length */
+};
+
+#endif

drivers/scsi/mvsas/mv_chips.h

+#ifndef _MV_CHIPS_H_
+#define _MV_CHIPS_H_
+
+#define mr32(reg)	readl(regs + MVS_##reg)
+#define mw32(reg,val)	writel((val), regs + MVS_##reg)
+#define mw32_f(reg,val)	do {			\
+	writel((val), regs + MVS_##reg);	\
+	readl(regs + MVS_##reg);		\
+	} while (0)
+
+static inline u32 mvs_cr32(void __iomem *regs, u32 addr)
+{
+	mw32(CMD_ADDR, addr);
+	return mr32(CMD_DATA);
+}
+
+static inline void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
+{
+	mw32(CMD_ADDR, addr);
+	mw32(CMD_DATA, val);
+}
+
+static inline u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
+{
+	void __iomem *regs = mvi->regs;
+	return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
+		mr32(P4_SER_CTLSTAT + (port - 4) * 4);
+}
+
+static inline void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	if (port < 4)
+		mw32(P0_SER_CTLSTAT + port * 4, val);
+	else
+		mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
+}
+
+static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	return (port < 4)?readl(regs + port * 8):
+		readl(regs2 + (port - 4) * 8);
+}
+
+static inline void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
+				u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	if (port < 4)
+		writel(val, regs + port * 8);
+	else
+		writel(val, regs2 + (port - 4) * 8);
+}
+
+static inline u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port);
+}
+
+static inline void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port, val);
+}
+
+static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_ADDR,
+			MVS_P4_CFG_ADDR, port, addr);
+}
+
+static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port);
+}
+
+static inline void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port, val);
+}
+
+static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_ADDR,
+			MVS_P4_VSR_ADDR, port, addr);
+}
+
+static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port);
+}
+
+static inline void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port, val);
+}
+
+static inline u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port);
+}
+
+static inline void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port, val);
+}
+
+#endif

drivers/scsi/mvsas/mv_defs.h

+/*
+	mv_defs.h - Marvell 88SE6440 SAS/SATA support
+
+	Copyright 2007 Red Hat, Inc.
+	Copyright 2008 Marvell. <kewei@marvell.com>
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License as
+	published by the Free Software Foundation; either version 2,
+	or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty
+	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+	See the GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public
+	License along with this program; see the file COPYING.	If not,
+	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+	MA 02139, USA.
+
+ */
+
+#ifndef _MV_DEFS_H_
+#define _MV_DEFS_H_
+
+/* driver compile-time configuration */
+enum driver_configuration {
+	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
+	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
+					/* software requires power-of-2
+					   ring size */
+
+	MVS_SLOTS		= 512,	/* command slots */
+	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
+	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
+	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
+	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
+
+	MVS_RX_FIS_COUNT	= 17,	/* Optional rx'd FISs (max 17) */
+
+	MVS_QUEUE_SIZE		= 30,	/* Support Queue depth */
+	MVS_CAN_QUEUE		= MVS_SLOTS - 1,	/* SCSI Queue depth */
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+	MVS_MAX_PHYS		= 8,	/* max. possible phys */
+	MVS_MAX_PORTS		= 8,	/* max. possible ports */
+	MVS_RX_FISL_SZ		= 0x400 + (MVS_RX_FIS_COUNT * 0x100),
+};
+
+/* peripheral registers (BAR2) */
+enum peripheral_registers {
+	SPI_CTL			= 0x10,	/* EEPROM control */
+	SPI_CMD			= 0x14,	/* EEPROM command */
+	SPI_DATA		= 0x18, /* EEPROM data */
+};
+
+enum peripheral_register_bits {
+	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
+	TWSI_RD			= (1U << 4),	/* EEPROM read access */
+
+	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
+};
+
+enum hw_register_bits {
+	/* MVS_GBL_CTL */
+	INT_EN			= (1U << 1),	/* Global int enable */
+	HBA_RST			= (1U << 0),	/* HBA reset */
+
+	/* MVS_GBL_INT_STAT */
+	INT_XOR			= (1U << 4),	/* XOR engine event */
+	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
+
+	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
+	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
+	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
+	MODE_AUTO_DET_PORT6 = (1U << 14),
+	MODE_AUTO_DET_PORT5 = (1U << 13),
+	MODE_AUTO_DET_PORT4 = (1U << 12),
+	MODE_AUTO_DET_PORT3 = (1U << 11),
+	MODE_AUTO_DET_PORT2 = (1U << 10),
+	MODE_AUTO_DET_PORT1 = (1U << 9),
+	MODE_AUTO_DET_PORT0 = (1U << 8),
+	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
+				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
+				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
+				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
+	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
+	MODE_SAS_PORT6_MASK = (1U << 6),
+	MODE_SAS_PORT5_MASK = (1U << 5),
+	MODE_SAS_PORT4_MASK = (1U << 4),
+	MODE_SAS_PORT3_MASK = (1U << 3),
+	MODE_SAS_PORT2_MASK = (1U << 2),
+	MODE_SAS_PORT1_MASK = (1U << 1),
+	MODE_SAS_PORT0_MASK = (1U << 0),
+	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
+				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
+				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
+				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
+
+				/* SAS_MODE value may be
+				 * dictated (in hw) by values
+				 * of SATA_TARGET & AUTO_DET
+				 */
+
+	/* MVS_TX_CFG */
+	TX_EN			= (1U << 16),	/* Enable TX */
+	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
+
+	/* MVS_RX_CFG */
+	RX_EN			= (1U << 16),	/* Enable RX */
+	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
+
+	/* MVS_INT_COAL */
+	COAL_EN			= (1U << 16),	/* Enable int coalescing */
+
+	/* MVS_INT_STAT, MVS_INT_MASK */
+	CINT_I2C		= (1U << 31),	/* I2C event */
+	CINT_SW0		= (1U << 30),	/* software event 0 */
+	CINT_SW1		= (1U << 29),	/* software event 1 */
+	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
+	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
+	CINT_MEM		= (1U << 26),	/* int mem parity err */
+	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
+	CINT_SRS		= (1U << 3),	/* SRS event */
+	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
+	CINT_DONE		= (1U << 0),	/* cmd completion */
+
+						/* shl for ports 1-3 */
+	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
+	CINT_PORT		= (1U << 8),	/* port0 event */
+	CINT_PORT_MASK_OFFSET	= 8,
+	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
+
+	/* TX (delivery) ring bits */
+	TXQ_CMD_SHIFT		= 29,
+	TXQ_CMD_SSP		= 1,		/* SSP protocol */
+	TXQ_CMD_SMP		= 2,		/* SMP protocol */
+	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
+	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
+	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
+	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
+	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
+	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
+	TXQ_SRS_MASK		= 0x7f,
+	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
+	TXQ_PHY_MASK		= 0xff,
+	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* RX (completion) ring bits */
+	RXQ_GOOD		= (1U << 23),	/* Response good */
+	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
+	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
+	RXQ_ATTN		= (1U << 19),	/* attention */
+	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
+	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
+	RXQ_DONE		= (1U << 16),	/* cmd complete */
+	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* mvs_cmd_hdr bits */
+	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
+	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
+
+						/* SSP initiator only */
+	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
+
+						/* SSP initiator or target */
+	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
+
+						/* SSP target only */
+	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
+	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
+	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
+	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
+
+	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
+	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
+	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
+	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
+	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
+	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
+	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
+	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
+	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
+	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
+
+	CCTL_RST		= (1U << 5),	/* port logic reset */
+
+						/* 0(LSB first), 1(MSB first) */
+	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
+	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
+	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
+	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
+
+	/* MVS_Px_SER_CTLSTAT (per-phy control) */
+	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
+	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
+	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
+	PHY_RST			= (1U << 0),	/* phy reset */
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+	PHY_READY_MASK		= (1U << 20),
+
+	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
+	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
+	PHYEV_AN		= (1U << 18),	/* SATA async notification */
+	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
+	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
+	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
+	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
+	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
+	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
+	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
+	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
+	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
+	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
+	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
+	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
+	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
+	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
+	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
+
+	/* MVS_PCS */
+	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
+	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
+	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6480 */
+	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
+	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
+	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
+	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
+	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
+	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
+	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
+
+	/* Port n Attached Device Info */
+	PORT_DEV_SSP_TRGT	= (1U << 19),
+	PORT_DEV_SMP_TRGT	= (1U << 18),
+	PORT_DEV_STP_TRGT	= (1U << 17),
+	PORT_DEV_SSP_INIT	= (1U << 11),
+	PORT_DEV_SMP_INIT	= (1U << 10),
+	PORT_DEV_STP_INIT	= (1U << 9),
+	PORT_PHY_ID_MASK	= (0xFFU << 24),
+	PORT_DEV_TRGT_MASK	= (0x7U << 17),
+	PORT_DEV_INIT_MASK	= (0x7U << 9),
+	PORT_DEV_TYPE_MASK	= (0x7U << 0),
+
+	/* Port n PHY Status */
+	PHY_RDY			= (1U << 2),
+	PHY_DW_SYNC		= (1U << 1),
+	PHY_OOB_DTCTD		= (1U << 0),
+
+	/* VSR */
+	/* PHYMODE 6 (CDB) */
+	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
+	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
+	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
+	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
+	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
+	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
+	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
+	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
+	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
+	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
+	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
+	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
+	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
+	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
+	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
+	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
+	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
+	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
+	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
+	PHYR_SATA_CTL		= 0x18,	/* SATA control */
+	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
+	PHYR_SATA_SIG0		= 0x20,	/*port SATA signature FIS(Byte 0-3) */
+	PHYR_SATA_SIG1		= 0x24,	/*port SATA signature FIS(Byte 4-7) */
+	PHYR_SATA_SIG2		= 0x28,	/*port SATA signature FIS(Byte 8-11) */
+	PHYR_SATA_SIG3		= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
+	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
+	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
+	PHYR_WIDE_PORT		= 0x38,	/* wide port participating */
+	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
+	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
+	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
+};
+
+enum mvs_info_flags {
+	MVF_MSI			= (1U << 0),	/* MSI is enabled */
+	MVF_PHY_PWR_FIX		= (1U << 1),	/* bug workaround */
+};
+
+enum sas_cmd_port_registers {
+	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
+	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
+	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
+	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
+	CMD_OOB_SPACE		= 0x110, /* OOB space control register */
+	CMD_OOB_BURST		= 0x114, /* OOB burst control register */
+	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
+	CMD_PHY_CONFIG0		= 0x11c, /* PHY config register 0 */
+	CMD_PHY_CONFIG1		= 0x120, /* PHY config register 1 */
+	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
+	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
+	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
+	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
+	CMD_ID_TEST		= 0x134, /* ID test register */
+	CMD_PL_TIMER		= 0x138, /* PL timer register */
+	CMD_WD_TIMER		= 0x13c, /* WD timer register */
+	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
+	CMD_APP_MEM_CTL		= 0x144, /* Application Memory Control */
+	CMD_XOR_MEM_CTL		= 0x148, /* XOR Block Memory Control */
+	CMD_DMA_MEM_CTL		= 0x14c, /* DMA Block Memory Control */
+	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
+	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
+	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
+	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
+	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
+	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
+	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
+	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
+	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
+	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
+	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
+	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
+	CMD_RESET_COUNT		= 0x188, /* Reset Count */
+	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
+	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
+	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
+	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
+	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
+	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
+	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
+	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
+	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
+	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
+	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
+	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
+	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
+	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
+	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
+};
+
+enum pci_cfg_register_bits {
+	PCTL_PWR_ON	= (0xFU << 24),
+	PCTL_OFF	= (0xFU << 12),
+	PRD_REQ_SIZE	= (0x4000),
+	PRD_REQ_MASK	= (0x00007000),
+};
+
+enum nvram_layout_offsets {
+	NVR_SIG		= 0x00,		/* 0xAA, 0x55 */
+	NVR_SAS_ADDR	= 0x02,		/* 8-byte SAS address */
+};
+
+enum chip_flavors {
+	chip_6320,
+	chip_6440,
+	chip_6480,
+};
+
+enum port_type {
+	PORT_TYPE_SAS	=  (1L << 1),
+	PORT_TYPE_SATA	=  (1L << 0),
+};
+
+/* Command Table Format */
+enum ct_format {
+	/* SSP */
+	SSP_F_H		=  0x00,
+	SSP_F_IU	=  0x18,
+	SSP_F_MAX	=  0x4D,
+	/* STP */
+	STP_CMD_FIS	=  0x00,
+	STP_ATAPI_CMD	=  0x40,
+	STP_F_MAX	=  0x10,
+	/* SMP */
+	SMP_F_T		=  0x00,
+	SMP_F_DEP	=  0x01,
+	SMP_F_MAX	=  0x101,
+};
+
+enum status_buffer {
+	SB_EIR_OFF	=  0x00,	/* Error Information Record */
+	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
+	SB_RFB_MAX	=  0x400,	/* RFB size*/
+};
+
+enum error_info_rec {
+	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
+	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
+	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
+	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
+	UNK_FIS 	= (1U << 27),	/* unknown FIS */
+	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
+	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
+	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
+	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
+	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
+	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
+	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
+	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
+	INTERLOCK	= (1U << 15),	/* interlock error */
+	NAK		= (1U << 14),	/* NAK rx'd */
+	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
+	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
+	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
+	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
+	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
+	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
+	BREAK		= (1U << 7),	/* break received */
+	BAD_DEST	= (1U << 6),	/* bad destination */
+	BAD_PROTO	= (1U << 5),	/* protocol not supported */
+	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
+	WRONG_DEST	= (1U << 3),	/* wrong destination error */
+	CREDIT_TO	= (1U << 2),	/* credit timeout */
+	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
+	BUF_PAR 	= (1U << 0),	/* buffer parity error */
+};
+
+enum error_info_rec_2 {
+	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
+	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
+	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
+	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
+	USR_BLK_NM	= (1U << 0),	/* User Block Number */
+};
+
+#endif

drivers/scsi/mvsas/mv_init.c

+/*
+	mv_init.c - Marvell 88SE6440 SAS/SATA init support
+
+	Copyright 2007 Red Hat, Inc.
+	Copyright 2008 Marvell. <kewei@marvell.com>
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License as
+	published by the Free Software Foundation; either version 2,
+	or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty
+	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+	See the GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public
+	License along with this program; see the file COPYING.	If not,
+	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+	MA 02139, USA.
+
+ */
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+static struct scsi_transport_template *mvs_stt;
+
+static const struct mvs_chip_info mvs_chips[] = {
+	[chip_6320] =		{ 2, 16, 9  },
+	[chip_6440] =		{ 4, 16, 9  },
+	[chip_6480] =		{ 8, 32, 10 },
+};
+
+static struct scsi_host_template mvs_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= mvs_slave_configure,
+	.slave_destroy		= sas_slave_destroy,
+	.scan_finished		= mvs_scan_finished,
+	.scan_start		= mvs_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.change_queue_type	= sas_change_queue_type,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.cmd_per_lun		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler	= sas_eh_device_reset_handler,
+	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+};
+
+static struct sas_domain_function_template mvs_transport_ops = {
+	.lldd_execute_task	= mvs_task_exec,
+	.lldd_control_phy	= mvs_phy_control,
+	.lldd_abort_task	= mvs_task_abort,
+	.lldd_port_formed	= mvs_port_formed,
+	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
+};
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+	struct mvs_phy *phy = &mvi->phy[phy_id];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+	sas_phy->class = SAS;
+	sas_phy->iproto = SAS_PROTOCOL_ALL;
+	sas_phy->tproto = 0;
+	sas_phy->type = PHY_TYPE_PHYSICAL;
+	sas_phy->role = PHY_ROLE_INITIATOR;
+	sas_phy->oob_mode = OOB_NOT_CONNECTED;
+	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+	sas_phy->id = phy_id;
+	sas_phy->sas_addr = &mvi->sas_addr[0];
+	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+	sas_phy->ha = &mvi->sas;
+	sas_phy->lldd_phy = phy;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+	int i;
+
+	if (!mvi)
+		return;
+
+	for (i = 0; i < MVS_SLOTS; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+		if (slot->buf)
+			dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
+					  slot->buf, slot->buf_dma);
+	}
+
+	if (mvi->tx)
+		dma_free_coherent(&mvi->pdev->dev,
+				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				  mvi->tx, mvi->tx_dma);
+	if (mvi->rx_fis)
+		dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
+				  mvi->rx_fis, mvi->rx_fis_dma);
+	if (mvi->rx)
+		dma_free_coherent(&mvi->pdev->dev,
+				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				  mvi->rx, mvi->rx_dma);
+	if (mvi->slot)
+		dma_free_coherent(&mvi->pdev->dev,
+				  sizeof(*mvi->slot) * MVS_SLOTS,
+				  mvi->slot, mvi->slot_dma);
+#ifdef MVS_ENABLE_PERI
+	if (mvi->peri_regs)
+		iounmap(mvi->peri_regs);
+#endif
+	if (mvi->regs)
+		iounmap(mvi->regs);
+	if (mvi->shost)
+		scsi_host_put(mvi->shost);
+	kfree(mvi->sas.sas_port);
+	kfree(mvi->sas.sas_phy);
+	kfree(mvi);
+}
+
+#ifdef MVS_USE_TASKLET
+static void mvs_tasklet(unsigned long data)
+{
+	struct mvs_info *mvi = (struct mvs_info *) data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mvi->lock, flags);
+
+#ifdef MVS_DISABLE_MSI
+	mvs_int_full(mvi);
+#else
+	mvs_int_rx(mvi, true);
+#endif
+	spin_unlock_irqrestore(&mvi->lock, flags);
+}
+#endif
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque)
+{
+	struct mvs_info *mvi = opaque;
+	void __iomem *regs = mvi->regs;
+	u32 stat;
+
+	stat = mr32(GBL_INT_STAT);
+
+	if (stat == 0 || stat == 0xffffffff)
+		return IRQ_NONE;
+
+	/* clear CMD_CMPLT ASAP */
+	mw32_f(INT_STAT, CINT_DONE);
+
+#ifndef MVS_USE_TASKLET
+	spin_lock(&mvi->lock);
+
+	mvs_int_full(mvi);
+
+	spin_unlock(&mvi->lock);
+#else
+	tasklet_schedule(&mvi->tasklet);
+#endif
+	return IRQ_HANDLED;
+}
+
+static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
+					    const struct pci_device_id *ent)
+{
+	struct mvs_info *mvi;
+	unsigned long res_start, res_len, res_flag;
+	struct asd_sas_phy **arr_phy;
+	struct asd_sas_port **arr_port;
+	const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
+	int i;
+
+	/*
+	 * alloc and init our per-HBA mvs_info struct
+	 */
+
+	mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
+	if (!mvi)
+		return NULL;
+
+	spin_lock_init(&mvi->lock);
+#ifdef MVS_USE_TASKLET
+	tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
+#endif
+	mvi->pdev = pdev;
+	mvi->chip = chip;
+
+	if (pdev->device == 0x6440 && pdev->revision == 0)
+		mvi->flags |= MVF_PHY_PWR_FIX;
+
+	/*
+	 * alloc and init SCSI, SAS glue
+	 */
+
+	mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+	if (!mvi->shost)
+		goto err_out;
+
+	arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
+	arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
+	if (!arr_phy || !arr_port)
+		goto err_out;
+
+	for (i = 0; i < MVS_MAX_PHYS; i++) {
+		mvs_phy_init(mvi, i);
+		arr_phy[i] = &mvi->phy[i].sas_phy;
+		arr_port[i] = &mvi->port[i].sas_port;
+		mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
+		mvi->port[i].wide_port_phymap = 0;
+		mvi->port[i].port_attached = 0;
+		INIT_LIST_HEAD(&mvi->port[i].list);
+	}
+
+	SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
+	mvi->shost->transportt = mvs_stt;
+	mvi->shost->max_id = 21;
+	mvi->shost->max_lun = ~0;
+	mvi->shost->max_channel = 0;
+	mvi->shost->max_cmd_len = 16;
+
+	mvi->sas.sas_ha_name = DRV_NAME;
+	mvi->sas.dev = &pdev->dev;
+	mvi->sas.lldd_module = THIS_MODULE;
+	mvi->sas.sas_addr = &mvi->sas_addr[0];
+	mvi->sas.sas_phy = arr_phy;
+	mvi->sas.sas_port = arr_port;
+	mvi->sas.num_phys = chip->n_phy;
+	mvi->sas.lldd_max_execute_num = 1;
+	mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
+	mvi->shost->can_queue = MVS_CAN_QUEUE;
+	mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
+	mvi->sas.lldd_ha = mvi;
+	mvi->sas.core.shost = mvi->shost;
+
+	mvs_tag_init(mvi);
+
+	/*
+	 * ioremap main and peripheral registers
+	 */
+
+#ifdef MVS_ENABLE_PERI
+	res_start = pci_resource_start(pdev, 2);
+	res_len = pci_resource_len(pdev, 2);
+	if (!res_start || !res_len)
+		goto err_out;
+
+	mvi->peri_regs = ioremap_nocache(res_start, res_len);
+	if (!mvi->peri_regs)
+		goto err_out;
+#endif
+
+	res_start = pci_resource_start(pdev, 4);
+	res_len = pci_resource_len(pdev, 4);
+	if (!res_start || !res_len)
+		goto err_out;
+
+	res_flag = pci_resource_flags(pdev, 4);
+	if (res_flag & IORESOURCE_CACHEABLE)
+		mvi->regs = ioremap(res_start, res_len);
+	else
+		mvi->regs = ioremap_nocache(res_start, res_len);
+
+	if (!mvi->regs)
+		goto err_out;
+
+	/*
+	 * alloc and init our DMA areas
+	 */
+
+	mvi->tx = dma_alloc_coherent(&pdev->dev,
+				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				     &mvi->tx_dma, GFP_KERNEL);
+	if (!mvi->tx)
+		goto err_out;
+	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
+
+	mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
+					 &mvi->rx_fis_dma, GFP_KERNEL);
+	if (!mvi->rx_fis)
+		goto err_out;
+	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+	mvi->rx = dma_alloc_coherent(&pdev->dev,
+				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				     &mvi->rx_dma, GFP_KERNEL);
+	if (!mvi->rx)
+		goto err_out;
+	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
+
+	mvi->rx[0] = cpu_to_le32(0xfff);
+	mvi->rx_cons = 0xfff;
+
+	mvi->slot = dma_alloc_coherent(&pdev->dev,
+				       sizeof(*mvi->slot) * MVS_SLOTS,
+				       &mvi->slot_dma, GFP_KERNEL);
+	if (!mvi->slot)
+		goto err_out;
+	memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
+
+	for (i = 0; i < MVS_SLOTS; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+		slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
+					       &slot->buf_dma, GFP_KERNEL);
+		if (!slot->buf)
+			goto err_out;
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+	}
+
+	/* finally, read NVRAM to get our SAS address */
+	if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
+		goto err_out;
+	return mvi;
+
+err_out:
+	mvs_free(mvi);
+	return NULL;
+}
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	int rc;
+	struct mvs_info *mvi;
+	irq_handler_t irq_handler = mvs_interrupt;
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	pci_set_master(pdev);
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_disable;
+
+	rc = pci_go_64(pdev);
+	if (rc)
+		goto err_out_regions;
+
+	mvi = mvs_alloc(pdev, ent);
+	if (!mvi) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	rc = mvs_hw_init(mvi);
+	if (rc)
+		goto err_out_mvi;
+
+#ifndef MVS_DISABLE_MSI
+	if (!pci_enable_msi(pdev)) {
+		u32 tmp;
+		void __iomem *regs = mvi->regs;
+		mvi->flags |= MVF_MSI;
+		irq_handler = mvs_msi_interrupt;
+		tmp = mr32(PCS);
+		mw32(PCS, tmp | PCS_SELF_CLEAR);
+	}
+#endif
+
+	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
+	if (rc)
+		goto err_out_msi;
+
+	rc = scsi_add_host(mvi->shost, &pdev->dev);
+	if (rc)
+		goto err_out_irq;
+
+	rc = sas_register_ha(&mvi->sas);
+	if (rc)
+		goto err_out_shost;
+
+	pci_set_drvdata(pdev, mvi);
+
+	mvs_print_info(mvi);
+
+	mvs_hba_interrupt_enable(mvi);
+
+	scsi_scan_host(mvi->shost);
+
+	return 0;
+
+err_out_shost:
+	scsi_remove_host(mvi->shost);
+err_out_irq:
+	free_irq(pdev->irq, mvi);
+err_out_msi:
+	if (mvi->flags |= MVF_MSI)
+		pci_disable_msi(pdev);
+err_out_mvi:
+	mvs_free(mvi);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+	return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+	struct mvs_info *mvi = pci_get_drvdata(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+
+	if (mvi) {
+		sas_unregister_ha(&mvi->sas);
+		mvs_hba_interrupt_disable(mvi);
+		sas_remove_host(mvi->shost);
+		scsi_remove_host(mvi->shost);
+
+		free_irq(pdev->irq, mvi);
+		if (mvi->flags & MVF_MSI)
+			pci_disable_msi(pdev);
+		mvs_free(mvi);
+		pci_release_regions(pdev);
+	}
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+	{
+		.vendor 	= PCI_VENDOR_ID_MARVELL,
+		.device 	= 0x6440,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x6480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_6480,
+	},
+	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+	{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
+
+	{ }	/* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= mvs_pci_table,
+	.probe		= mvs_pci_init,
+	.remove		= __devexit_p(mvs_pci_remove),
+};
+
+static int __init mvs_init(void)
+{
+	int rc;
+
+	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+	if (!mvs_stt)
+		return -ENOMEM;
+
+	rc = pci_register_driver(&mvs_pci_driver);
+	if (rc)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	sas_release_transport(mvs_stt);
+	return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+	pci_unregister_driver(&mvs_pci_driver);
+	sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);

drivers/scsi/mvsas/mv_sas.h

+/*
+	mv_sas.h - Marvell 88SE6440 SAS/SATA support
+
+	Copyright 2007 Red Hat, Inc.
+	Copyright 2008 Marvell. <kewei@marvell.com>
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License as
+	published by the Free Software Foundation; either version 2,
+	or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty
+	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+	See the GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public
+	License along with this program; see the file COPYING.	If not,
+	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+	MA 02139, USA.
+
+ */
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/version.h>
+#include "mv_defs.h"
+
+#define DRV_NAME	"mvsas"
+#define DRV_VERSION	"0.5.2"
+#define _MV_DUMP	0
+#define MVS_DISABLE_NVRAM
+#define MVS_DISABLE_MSI
+
+#define MVS_ID_NOT_MAPPED	0x7f
+#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq, __rest)			\
+	for ((__mc) = (__lseq_mask), (__lseq) = 0;			\
+					(__mc) != 0 && __rest;		\
+					(++__lseq), (__mc) >>= 1)
+
+struct mvs_chip_info {
+	u32		n_phy;
+	u32		srs_sz;
+	u32		slot_width;
+};
+
+struct mvs_err_info {
+	__le32			flags;
+	__le32			flags2;
+};
+
+struct mvs_cmd_hdr {
+	__le32			flags;	/* PRD tbl len; SAS, SATA ctl */
+	__le32			lens;	/* cmd, max resp frame len */
+	__le32			tags;	/* targ port xfer tag; tag */
+	__le32			data_len;	/* data xfer len */
+	__le64			cmd_tbl;	/* command table address */
+	__le64			open_frame;	/* open addr frame address */
+	__le64			status_buf;	/* status buffer address */
+	__le64			prd_tbl;		/* PRD tbl address */
+	__le32			reserved[4];
+};
+
+struct mvs_port {
+	struct asd_sas_port	sas_port;
+	u8			port_attached;
+	u8			taskfileset;
+	u8			wide_port_phymap;
+	struct list_head	list;
+};
+
+struct mvs_phy {
+	struct mvs_port		*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	u64		dev_sas_addr;
+	u64		att_dev_sas_addr;
+	u32		att_dev_info;
+	u32		dev_info;
+	u32		phy_type;
+	u32		phy_status;
+	u32		irq_status;
+	u32		frame_rcvd_size;
+	u8		frame_rcvd[32];
+	u8		phy_attached;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct mvs_slot_info {
+	struct list_head list;
+	struct sas_task *task;
+	u32 n_elem;
+	u32 tx;
+
+	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+	 * and PRD table
+	 */
+	void *buf;
+	dma_addr_t buf_dma;
+#if _MV_DUMP
+	u32 cmd_size;
+#endif
+
+	void *response;
+	struct mvs_port *port;
+};
+
+struct mvs_info {
+	unsigned long flags;
+
+	/* host-wide lock */
+	spinlock_t lock;
+
+	/* our device */
+	struct pci_dev *pdev;
+
+	/* enhanced mode registers */
+	void __iomem *regs;
+
+	/* peripheral registers */
+	void __iomem *peri_regs;
+
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* SCSI/SAS glue */
+	struct sas_ha_struct sas;
+	struct Scsi_Host *shost;
+
+	/* TX (delivery) DMA ring */
+	__le32 *tx;
+	dma_addr_t tx_dma;
+
+	/* cached next-producer idx */
+	u32 tx_prod;
+
+	/* RX (completion) DMA ring */
+	__le32 *rx;
+	dma_addr_t rx_dma;
+
+	/* RX consumer idx */
+	u32 rx_cons;
+
+	/* RX'd FIS area */
+	__le32 *rx_fis;
+	dma_addr_t rx_fis_dma;
+
+	/* DMA command header slots */
+	struct mvs_cmd_hdr *slot;
+	dma_addr_t slot_dma;
+
+	const struct mvs_chip_info *chip;
+
+	u8 tags[MVS_SLOTS];
+	struct mvs_slot_info slot_info[MVS_SLOTS];
+				/* further per-slot information */
+	struct mvs_phy phy[MVS_MAX_PHYS];
+	struct mvs_port port[MVS_MAX_PHYS];
+#ifdef MVS_USE_TASKLET
+	struct tasklet_struct tasklet;
+#endif
+};
+
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata);
+int mvs_slave_configure(struct scsi_device *sdev);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags);
+int mvs_task_abort(struct sas_task *task);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+void mvs_int_full(struct mvs_info *mvi);
+void mvs_tag_init(struct mvs_info *mvi);
+int mvs_nvram_read(struct mvs_info *mvi, u32 addr, void *buf, u32 buflen);
+int __devinit mvs_hw_init(struct mvs_info *mvi);
+void __devinit mvs_print_info(struct mvs_info *mvi);
+void mvs_hba_interrupt_enable(struct mvs_info *mvi);
+void mvs_hba_interrupt_disable(struct mvs_info *mvi);
+void mvs_detect_porttype(struct mvs_info *mvi, int i);
+u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port);
+void mvs_enable_xmt(struct mvs_info *mvi, int PhyId);
+void __devinit mvs_phy_hacks(struct mvs_info *mvi);
+void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port);
+
+#endif