Skip to content

L
linux-davinci
Commit d3f0e10a authored by Richard Ash's avatar Richard Ash Committed by Greg Kroah-Hartman
Browse files
Options

Staging: quatech_usb2: vendor implementation of break_ctl 

This patch imports the implementation of the break_ctl, throttle and
unthrottle methods from the vendor driver into the staging driver. This
compiles but is not yet tested.
Signed-off-by: default avatarRichard Ash <richard@audacityteam.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 2715dd6a
Hide whitespace changes
Inline Side-by-side
Showing with 180 additions and 40 deletions
drivers/staging/quatech_usb2/quatech_usb2.c
View file @ d3f0e10a
......@@ -56,11 +56,11 @@ static int debug;
#define QT2_GET_SET_UART 0xc1
#define QT2_HW_FLOW_CONTROL_MASK 0xc5
#define QT2_SW_FLOW_CONTROL_MASK 0xc6
#define QT2_SW_FLOW_CONTROL_DISABLE 0xc7
/*#define QT_BREAK_CONTROL 0xc8
#define QT_STOP_RECEIVE 0xe0*/
#define QT2_FLUSH_DEVICE 0xc4
#define QT_GET_SET_QMCR 0xe1
#define QT2_SW_FLOW_CONTROL_DISABLE 0xc7
#define QT2_BREAK_CONTROL 0xc8
#define QT2_STOP_RECEIVE 0xe0
#define QT2_FLUSH_DEVICE 0xc4
#define QT2_GET_SET_QMCR 0xe1
/* sorts of flush we can do on */
#define QT2_FLUSH_RX 0x00
......@@ -138,31 +138,21 @@ static struct usb_driver quausb2_usb_driver = {
.no_dynamic_id = 1,
};
/** structure in which to keep all the messy stuff that this driver needs
* alongside the usb_serial_port structure
* @param read_urb_busy Flag indicating that port->read_urb is in use
* @param close_pending flag indicating that this port is in the process of
/**
* quatech2_port: Structure in which to keep all the messy stuff that this
* driver needs alongside the usb_serial_port structure
* @read_urb_busy: Flag indicating that port->read_urb is in use
* @close_pending: flag indicating that this port is in the process of
* being closed (and so no new reads / writes should be started).
* @param shadowLSR Last received state of the line status register, holds the
* @shadowLSR: Last received state of the line status register, holds the
* value of the line status flags from the port
* @param shadowMSR Last received state of the modem status register, holds
* @shadowMSR: Last received state of the modem status register, holds
* the value of the modem status received from the port
* @param rcv_flush Flag indicating that a receive flush has occured on
* @rcv_flush: Flag indicating that a receive flush has occured on
* the hardware.
* @param xmit_flush Flag indicating that a transmit flush has been processed by
* @xmit_flush: Flag indicating that a transmit flush has been processed by
* the hardware.
* @param fifo_empty_flag
* - Starts off true when port opened
* - set false when a write is submitted to the driver
* - as far as I can see not true again until device is re-opened.
* - read in a number of places.
* @param tx_fifo_room
* - set to FIFO_DEPTH when port opened
* - decremented by tc_pending_bytes when a new write is submitted.
* - set to FIFO_DEPTH when "xmit_empty" is received from the device,
* regardless of how many bytes were reported to have been sent (?)
*
* @param tx_pending_bytes Number of bytes waiting to be sent. This total
* @tx_pending_bytes: Number of bytes waiting to be sent. This total
* includes the size (excluding header) of URBs that have been submitted but
* have not yet been sent to to the device, and bytes that have been sent out
* of the port but not yet reported sent by the "xmit_empty" messages (which
......@@ -173,6 +163,10 @@ static struct usb_driver quausb2_usb_driver = {
* each time a write urb is dispatched.
* - is decremented each time a "transmit empty" message is received
* by the driver in the data stream.
* @sem: Semaphore to lock access to this structure when we need to ensure that
* races don't occur to access bits of it.
* @open_count: The number of uses of the port currently having
* it open, i.e. the reference count.
*/
struct quatech2_port {
int magic;
......@@ -180,18 +174,16 @@ struct quatech2_port {
bool close_pending;
__u8 shadowLSR;
__u8 shadowMSR;
/*int xmit_fifo_room_bytes;*/
bool rcv_flush;
bool xmit_flush;
/* bool fifo_empty_flag;
int tx_fifo_room;*/
int tx_pending_bytes;
struct semaphore sem;
int open_count;
char active; /* someone has this device open */
unsigned char *xfer_to_tty_buffer;
wait_queue_head_t wait;
int open_count; /* number of times this port has been opened */
struct semaphore sem; /* locks this structure */
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char RxHolding;
......@@ -281,6 +273,8 @@ static int qt2_boxsethw_flowctl(struct usb_serial *serial,
static int qt2_boxsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber,
unsigned char stop_char, unsigned char start_char);
static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber);
static int qt2_boxstoprx(struct usb_serial *serial, unsigned short uart_number,
unsigned short stop);
/* implementation functions, roughly in order of use, are here */
static int qt2_calc_num_ports(struct usb_serial *serial)
......@@ -359,6 +353,8 @@ static int qt2_attach(struct usb_serial *serial)
__func__, i);
return -ENOMEM;
}
/* initialise stuff in the structure */
qt2_port->open_count = 0; /* port is not open */
spin_lock_init(&qt2_port->lock);
qt2_set_port_private(port, qt2_port);
}
......@@ -577,8 +573,6 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
port->bulk_out_size,
qt2_write_bulk_callback,
port);
/*port_extra->fifo_empty_flag = true;
port_extra->tx_fifo_room = FIFO_DEPTH;*/
port_extra->tx_pending_bytes = 0;
if (dev_extra->open_ports == 0) {
......@@ -615,6 +609,8 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
/* initialize our wait queues */
init_waitqueue_head(&port_extra->wait);
/* increment the count of openings of this port by one */
port_extra->open_count++;
/* remember to store dev_extra, port_extra and port0_extra back again at
* end !*/
......@@ -696,6 +692,9 @@ static void qt2_close(struct usb_serial_port *port)
port->bulk_out_buffer = NULL;
port->bulk_out_size = 0;
/* decrement the count of openings of this port by one */
port_extra->open_count--;
/* one less overall open as well */
dev_extra->open_ports--;
dbg("%s(): Exit, dev_extra->open_ports = %d", __func__,
dev_extra->open_ports);
......@@ -1027,7 +1026,7 @@ static void qt2_set_termios(struct tty_struct *tty,
/* Round to nearest divisor */
if (((remainder * 2) >= baud) && (baud != 110))
divisor++;
dbg("%s(): setting divisor = %d, QT2_MAX_BAUD_RATE = %d , LCR = 0x%x",
dbg("%s(): setting divisor = %d, QT2_MAX_BAUD_RATE = %d , LCR = %#.2x",
__func__, divisor, QT2_MAX_BAUD_RATE, LCR_change_to);
status = qt2_boxsetuart(serial, UartNumber, (unsigned short) divisor,
......@@ -1156,6 +1155,131 @@ static int qt2_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
/** qt2_break - Turn BREAK on and off on the UARTs
*/
static void qt2_break(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data; /* parent port */
struct usb_serial *serial = port->serial; /* parent device */
struct quatech2_port *port_extra; /* extra data for this port */
__u16 break_value;
unsigned int result;
port_extra = qt2_get_port_private(port);
if (!serial) {
dbg("%s(): port %d: no serial object", __func__, port->number);
return;
}
if (break_state == -1)
break_value = 1;
else
break_value = 0;
dbg("%s(): port %d, break_value %d", __func__, port->number,
break_value);
down(&port_extra->sem);
if (!port_extra->open_count) {
dbg("%s(): port not open", __func__);
goto exit;
}
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT2_BREAK_CONTROL, 0x40, break_value,
port->number, NULL, 0, 300);
exit:
up(&port_extra->sem);
dbg("%s(): exit port %d", __func__, port->number);
}
/**
* qt2_throttle: - stop reading new data from the port
*/
static void qt2_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
struct quatech2_port *port_extra; /* extra data for this port */
dbg("%s(): port %d", __func__, port->number);
port_extra = qt2_get_port_private(port);
if (!serial) {
dbg("%s(): enter port %d no serial object", __func__,
port->number);
return;
}
down(&port_extra->sem); /* lock structure */
if (!port_extra->open_count) {
dbg("%s(): port not open", __func__);
goto exit;
}
/* Send command to box to stop receiving stuff. This will stop this
* particular UART from filling the endpoint - in the multiport case the
* FPGA UART will handle any flow control implmented, but for the single
* port it's handed differently and we just quit submitting urbs
*/
if (serial->dev->descriptor.idProduct != QUATECH_SSU2_100)
qt2_boxstoprx(serial, port->number, 1);
port->throttled = 1;
exit:
up(&port_extra->sem);
dbg("%s(): port %d: setting port->throttled", __func__, port->number);
return;
}
/**
* qt2_unthrottle: - start receiving data through the port again after being
* throttled
*/
static void qt2_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
struct quatech2_port *port_extra; /* extra data for this port */
struct usb_serial_port *port0; /* first port structure on device */
struct quatech2_dev *dev_extra; /* extra data for the device */
if (!serial) {
dbg("%s() enter port %d no serial object!", __func__,
port->number);
return;
}
dbg("%s(): enter port %d", __func__, port->number);
dev_extra = qt2_get_dev_private(serial);
port_extra = qt2_get_port_private(port);
port0 = serial->port[0]; /* get the first port's device structure */
down(&port_extra->sem);
if (!port_extra->open_count) {
dbg("%s(): port %d not open", __func__, port->number);
goto exit;
}
if (port->throttled != 0) {
dbg("%s(): port %d: unsetting port->throttled", __func__,
port->number);
port->throttled = 0;
/* Send command to box to start receiving stuff */
if (serial->dev->descriptor.idProduct != QUATECH_SSU2_100) {
qt2_boxstoprx(serial, port->number, 0);
} else if (dev_extra->ReadBulkStopped == true) {
usb_fill_bulk_urb(port0->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
port0->bulk_in_endpointAddress),
port0->bulk_in_buffer,
port0->bulk_in_size,
qt2_read_bulk_callback,
serial);
}
}
exit:
up(&port_extra->sem);
dbg("%s(): exit port %d", __func__, port->number);
return;
}
/* internal, private helper functions for the driver */
/* Power up the FPGA in the box to get it working */
......@@ -1173,7 +1297,7 @@ static int qt2_boxpoweron(struct usb_serial *serial)
}
/*
* qt2_boxsetQMCR Issue a QT_GET_SET_QMCR vendor-spcific request on the
* qt2_boxsetQMCR Issue a QT2_GET_SET_QMCR vendor-spcific request on the
* default control pipe. If successful return the number of bytes written,
* otherwise return a negative error number of the problem.
*/
......@@ -1189,7 +1313,7 @@ static int qt2_boxsetQMCR(struct usb_serial *serial, __u16 Uart_Number,
Uart_Number, PortSettings);
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT_GET_SET_QMCR, 0x40, PortSettings,
QT2_GET_SET_QMCR, 0x40, PortSettings,
(__u16)Uart_Number, NULL, 0, 5000);
return result;
}
......@@ -1388,7 +1512,7 @@ __func__);
/* active is a usb_serial_port. It has a member port which is a
* tty_port. From this we get a tty_struct pointer which is what we
* actually wanted, and keep it on tty_st */
* actually wanted, and keep it on tty_st */
tty_st = tty_port_tty_get(&active->port);
if (!tty_st) {
dbg("%s - bad tty pointer - exiting", __func__);
......@@ -1457,7 +1581,7 @@ __func__);
}
/* Port change. If port open push
* current data up to tty layer */
if (dev_extra->open_ports > 0)
if (active_extra->open_count > 0)
tty_flip_buffer_push(tty_st);
dbg("Port Change: new port = %d",
......@@ -1798,6 +1922,22 @@ static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber)
0, 300);
}
/**
* qt2_boxstoprx - Start and stop reception of data by the FPGA UART in
* response to requests from the tty layer
* @serial: pointer to the usb_serial structure for the parent device
* @uart_number: which UART on the device we are addressing
* @stop: Whether to start or stop data reception. Set to 1 to stop data being
* received, and to 0 to start it being received.
*/
static int qt2_boxstoprx(struct usb_serial *serial, unsigned short uart_number,
unsigned short stop)
{
return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT2_STOP_RECEIVE, 0x40, stop, uart_number, NULL, 0, 300);
}
/*
* last things in file: stuff to register this driver into the generic
* USB serial framework.
......@@ -1817,12 +1957,12 @@ static struct usb_serial_driver quatech2_device = {
.write = qt2_write,
.write_room = qt2_write_room,
.chars_in_buffer = qt2_chars_in_buffer,
/*.throttle = qt_throttle,
.unthrottle = qt_unthrottle,*/
.throttle = qt2_throttle,
.unthrottle = qt2_unthrottle,
.calc_num_ports = qt2_calc_num_ports,
.ioctl = qt2_ioctl,
.set_termios = qt2_set_termios,
/*.break_ctl = qt_break,*/
.break_ctl = qt2_break,
.tiocmget = qt2_tiocmget,
.tiocmset = qt2_tiocmset,
.attach = qt2_attach,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment