Commit d362af62 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: ctxfi - Fix / clean up hw20k2 chip code

- Clean up Hungarian coding style
- Don't use static variables for I2C information; this unables to use
  multiple instances.  Now they are stored in struct hw20k2 fields.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent af8500bb
......@@ -15,8 +15,6 @@
*
*/
#include "cthw20k2.h"
#include "ct20k2reg.h"
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pci.h>
......@@ -25,6 +23,8 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include "cthw20k2.h"
#include "ct20k2reg.h"
#if BITS_PER_LONG == 32
#define CT_XFI_DMA_MASK DMA_BIT_MASK(32) /* 32 bit PTE */
......@@ -32,6 +32,14 @@
#define CT_XFI_DMA_MASK DMA_BIT_MASK(64) /* 64 bit PTE */
#endif
struct hw20k2 {
struct hw hw;
/* for i2c */
unsigned char dev_id;
unsigned char addr_size;
unsigned char data_size;
};
static u32 hw_read_20kx(struct hw *hw, u32 reg);
static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
......@@ -1125,7 +1133,7 @@ struct trn_conf {
static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
{
u32 dwData;
u32 data;
int i;
/* Program I2S with proper sample rate and enable the correct I2S
......@@ -1156,12 +1164,12 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
if (i <= 3) {
/* 1st 3 channels are SPDIFs (SB0960) */
if (i == 3)
dwData = 0x1001001;
data = 0x1001001;
else
dwData = 0x1000001;
data = 0x1000001;
hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), dwData);
hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), dwData);
hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
/* Initialize the SPDIF Out Channel status registers.
* The value specified here is based on the typical
......@@ -1179,13 +1187,13 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_H+(0x40*i), 0x0B);
} else {
/* Next 5 channels are I2S (SB0960) */
dwData = 0x11;
hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), dwData);
data = 0x11;
hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), data);
if (2 == info->msr) {
/* Four channels per sample period */
dwData |= 0x1000;
data |= 0x1000;
}
hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), dwData);
hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), data);
}
}
......@@ -1377,34 +1385,32 @@ static int hw_auto_init(struct hw *hw)
#define I2C_ADDRESS_PTAD 0x0000FFFF
#define I2C_ADDRESS_SLAD 0x007F0000
struct REGS_CS4382 {
u32 dwModeControl_1;
u32 dwModeControl_2;
u32 dwModeControl_3;
struct regs_cs4382 {
u32 mode_control_1;
u32 mode_control_2;
u32 mode_control_3;
u32 dwFilterControl;
u32 dwInvertControl;
u32 filter_control;
u32 invert_control;
u32 dwMixControl_P1;
u32 dwVolControl_A1;
u32 dwVolControl_B1;
u32 mix_control_P1;
u32 vol_control_A1;
u32 vol_control_B1;
u32 dwMixControl_P2;
u32 dwVolControl_A2;
u32 dwVolControl_B2;
u32 mix_control_P2;
u32 vol_control_A2;
u32 vol_control_B2;
u32 dwMixControl_P3;
u32 dwVolControl_A3;
u32 dwVolControl_B3;
u32 mix_control_P3;
u32 vol_control_A3;
u32 vol_control_B3;
u32 dwMixControl_P4;
u32 dwVolControl_A4;
u32 dwVolControl_B4;
u32 mix_control_P4;
u32 vol_control_A4;
u32 vol_control_B4;
};
static u8 m_bAddressSize, m_bDataSize, m_bDeviceID;
static int I2CUnlockFullAccess(struct hw *hw)
static int hw20k2_i2c_unlock_full_access(struct hw *hw)
{
u8 UnlockKeySequence_FLASH_FULLACCESS_MODE[2] = {0xB3, 0xD4};
......@@ -1420,7 +1426,7 @@ static int I2CUnlockFullAccess(struct hw *hw)
return -1;
}
static int I2CLockChip(struct hw *hw)
static int hw20k2_i2c_lock_chip(struct hw *hw)
{
/* Write twice */
hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
......@@ -1431,54 +1437,55 @@ static int I2CLockChip(struct hw *hw)
return -1;
}
static int I2CInit(struct hw *hw, u8 bDeviceID, u8 bAddressSize, u8 bDataSize)
static int hw20k2_i2c_init(struct hw *hw, u8 dev_id, u8 addr_size, u8 data_size)
{
struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
int err;
unsigned int RegI2CStatus;
unsigned int RegI2CAddress;
unsigned int i2c_status;
unsigned int i2c_addr;
err = I2CUnlockFullAccess(hw);
err = hw20k2_i2c_unlock_full_access(hw);
if (err < 0)
return err;
m_bAddressSize = bAddressSize;
m_bDataSize = bDataSize;
m_bDeviceID = bDeviceID;
hw20k2->addr_size = addr_size;
hw20k2->data_size = data_size;
hw20k2->dev_id = dev_id;
RegI2CAddress = 0;
set_field(&RegI2CAddress, I2C_ADDRESS_SLAD, bDeviceID);
i2c_addr = 0;
set_field(&i2c_addr, I2C_ADDRESS_SLAD, dev_id);
hw_write_20kx(hw, I2C_IF_ADDRESS, RegI2CAddress);
hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
RegI2CStatus = hw_read_20kx(hw, I2C_IF_STATUS);
i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
set_field(&RegI2CStatus, I2C_STATUS_DCM, 1); /* Direct control mode */
set_field(&i2c_status, I2C_STATUS_DCM, 1); /* Direct control mode */
hw_write_20kx(hw, I2C_IF_STATUS, RegI2CStatus);
hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
return 0;
}
static int I2CUninit(struct hw *hw)
static int hw20k2_i2c_uninit(struct hw *hw)
{
unsigned int RegI2CStatus;
unsigned int RegI2CAddress;
unsigned int i2c_status;
unsigned int i2c_addr;
RegI2CAddress = 0;
set_field(&RegI2CAddress, I2C_ADDRESS_SLAD, 0x57); /* I2C id */
i2c_addr = 0;
set_field(&i2c_addr, I2C_ADDRESS_SLAD, 0x57); /* I2C id */
hw_write_20kx(hw, I2C_IF_ADDRESS, RegI2CAddress);
hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
RegI2CStatus = hw_read_20kx(hw, I2C_IF_STATUS);
i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
set_field(&RegI2CStatus, I2C_STATUS_DCM, 0); /* I2C mode */
set_field(&i2c_status, I2C_STATUS_DCM, 0); /* I2C mode */
hw_write_20kx(hw, I2C_IF_STATUS, RegI2CStatus);
hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
return I2CLockChip(hw);
return hw20k2_i2c_lock_chip(hw);
}
static int I2CWaitDataReady(struct hw *hw)
static int hw20k2_i2c_wait_data_ready(struct hw *hw)
{
int i = 0x400000;
unsigned int ret;
......@@ -1490,51 +1497,53 @@ static int I2CWaitDataReady(struct hw *hw)
return i;
}
static int I2CRead(struct hw *hw, u16 wAddress, u32 *pdwData)
static int hw20k2_i2c_read(struct hw *hw, u16 addr, u32 *datap)
{
unsigned int RegI2CStatus;
struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
unsigned int i2c_status;
RegI2CStatus = hw_read_20kx(hw, I2C_IF_STATUS);
set_field(&RegI2CStatus, I2C_STATUS_BC,
(4 == m_bAddressSize) ? 0 : m_bAddressSize);
hw_write_20kx(hw, I2C_IF_STATUS, RegI2CStatus);
if (!I2CWaitDataReady(hw))
i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
set_field(&i2c_status, I2C_STATUS_BC,
(4 == hw20k2->addr_size) ? 0 : hw20k2->addr_size);
hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
if (!hw20k2_i2c_wait_data_ready(hw))
return -1;
hw_write_20kx(hw, I2C_IF_WDATA, (u32)wAddress);
if (!I2CWaitDataReady(hw))
hw_write_20kx(hw, I2C_IF_WDATA, addr);
if (!hw20k2_i2c_wait_data_ready(hw))
return -1;
/* Force a read operation */
hw_write_20kx(hw, I2C_IF_RDATA, 0);
if (!I2CWaitDataReady(hw))
if (!hw20k2_i2c_wait_data_ready(hw))
return -1;
*pdwData = hw_read_20kx(hw, I2C_IF_RDATA);
*datap = hw_read_20kx(hw, I2C_IF_RDATA);
return 0;
}
static int I2CWrite(struct hw *hw, u16 wAddress, u32 dwData)
static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data)
{
unsigned int dwI2CData = (dwData << (m_bAddressSize * 8)) | wAddress;
unsigned int RegI2CStatus;
struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
unsigned int i2c_data = (data << (hw20k2->addr_size * 8)) | addr;
unsigned int i2c_status;
RegI2CStatus = hw_read_20kx(hw, I2C_IF_STATUS);
i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
set_field(&RegI2CStatus, I2C_STATUS_BC,
(4 == (m_bAddressSize + m_bDataSize)) ?
0 : (m_bAddressSize + m_bDataSize));
set_field(&i2c_status, I2C_STATUS_BC,
(4 == (hw20k2->addr_size + hw20k2->data_size)) ?
0 : (hw20k2->addr_size + hw20k2->data_size));
hw_write_20kx(hw, I2C_IF_STATUS, RegI2CStatus);
I2CWaitDataReady(hw);
hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
hw20k2_i2c_wait_data_ready(hw);
/* Dummy write to trigger the write oprtation */
hw_write_20kx(hw, I2C_IF_WDATA, 0);
I2CWaitDataReady(hw);
hw20k2_i2c_wait_data_ready(hw);
/* This is the real data */
hw_write_20kx(hw, I2C_IF_WDATA, dwI2CData);
I2CWaitDataReady(hw);
hw_write_20kx(hw, I2C_IF_WDATA, i2c_data);
hw20k2_i2c_wait_data_ready(hw);
return 0;
}
......@@ -1542,10 +1551,10 @@ static int I2CWrite(struct hw *hw, u16 wAddress, u32 dwData)
static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
{
int err;
u32 dwData;
u32 data;
int i;
struct REGS_CS4382 cs4382_Read = {0};
struct REGS_CS4382 cs4382_Def = {
struct regs_cs4382 cs_read = {0};
struct regs_cs4382 cs_def = {
0x00000001, /* Mode Control 1 */
0x00000000, /* Mode Control 2 */
0x00000084, /* Mode Control 3 */
......@@ -1566,87 +1575,86 @@ static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
};
/* Set DAC reset bit as output */
dwData = hw_read_20kx(hw, GPIO_CTRL);
dwData |= 0x02;
hw_write_20kx(hw, GPIO_CTRL, dwData);
data = hw_read_20kx(hw, GPIO_CTRL);
data |= 0x02;
hw_write_20kx(hw, GPIO_CTRL, data);
err = I2CInit(hw, 0x18, 1, 1);
err = hw20k2_i2c_init(hw, 0x18, 1, 1);
if (err < 0)
goto End;
for (i = 0; i < 2; i++) {
/* Reset DAC twice just in-case the chip
* didn't initialized properly */
dwData = hw_read_20kx(hw, GPIO_DATA);
data = hw_read_20kx(hw, GPIO_DATA);
/* GPIO data bit 1 */
dwData &= 0xFFFFFFFD;
hw_write_20kx(hw, GPIO_DATA, dwData);
data &= 0xFFFFFFFD;
hw_write_20kx(hw, GPIO_DATA, data);
mdelay(10);
dwData |= 0x2;
hw_write_20kx(hw, GPIO_DATA, dwData);
data |= 0x2;
hw_write_20kx(hw, GPIO_DATA, data);
mdelay(50);
/* Reset the 2nd time */
dwData &= 0xFFFFFFFD;
hw_write_20kx(hw, GPIO_DATA, dwData);
data &= 0xFFFFFFFD;
hw_write_20kx(hw, GPIO_DATA, data);
mdelay(10);
dwData |= 0x2;
hw_write_20kx(hw, GPIO_DATA, dwData);
data |= 0x2;
hw_write_20kx(hw, GPIO_DATA, data);
mdelay(50);
if (I2CRead(hw, CS4382_MC1, &cs4382_Read.dwModeControl_1))
if (hw20k2_i2c_read(hw, CS4382_MC1, &cs_read.mode_control_1))
continue;
if (I2CRead(hw, CS4382_MC2, &cs4382_Read.dwModeControl_2))
if (hw20k2_i2c_read(hw, CS4382_MC2, &cs_read.mode_control_2))
continue;
if (I2CRead(hw, CS4382_MC3, &cs4382_Read.dwModeControl_3))
if (hw20k2_i2c_read(hw, CS4382_MC3, &cs_read.mode_control_3))
continue;
if (I2CRead(hw, CS4382_FC, &cs4382_Read.dwFilterControl))
if (hw20k2_i2c_read(hw, CS4382_FC, &cs_read.filter_control))
continue;
if (I2CRead(hw, CS4382_IC, &cs4382_Read.dwInvertControl))
if (hw20k2_i2c_read(hw, CS4382_IC, &cs_read.invert_control))
continue;
if (I2CRead(hw, CS4382_XC1, &cs4382_Read.dwMixControl_P1))
if (hw20k2_i2c_read(hw, CS4382_XC1, &cs_read.mix_control_P1))
continue;
if (I2CRead(hw, CS4382_VCA1, &cs4382_Read.dwVolControl_A1))
if (hw20k2_i2c_read(hw, CS4382_VCA1, &cs_read.vol_control_A1))
continue;
if (I2CRead(hw, CS4382_VCB1, &cs4382_Read.dwVolControl_B1))
if (hw20k2_i2c_read(hw, CS4382_VCB1, &cs_read.vol_control_B1))
continue;
if (I2CRead(hw, CS4382_XC2, &cs4382_Read.dwMixControl_P2))
if (hw20k2_i2c_read(hw, CS4382_XC2, &cs_read.mix_control_P2))
continue;
if (I2CRead(hw, CS4382_VCA2, &cs4382_Read.dwVolControl_A2))
if (hw20k2_i2c_read(hw, CS4382_VCA2, &cs_read.vol_control_A2))
continue;
if (I2CRead(hw, CS4382_VCB2, &cs4382_Read.dwVolControl_B2))
if (hw20k2_i2c_read(hw, CS4382_VCB2, &cs_read.vol_control_B2))
continue;
if (I2CRead(hw, CS4382_XC3, &cs4382_Read.dwMixControl_P3))
if (hw20k2_i2c_read(hw, CS4382_XC3, &cs_read.mix_control_P3))
continue;
if (I2CRead(hw, CS4382_VCA3, &cs4382_Read.dwVolControl_A3))
if (hw20k2_i2c_read(hw, CS4382_VCA3, &cs_read.vol_control_A3))
continue;
if (I2CRead(hw, CS4382_VCB3, &cs4382_Read.dwVolControl_B3))
if (hw20k2_i2c_read(hw, CS4382_VCB3, &cs_read.vol_control_B3))
continue;
if (I2CRead(hw, CS4382_XC4, &cs4382_Read.dwMixControl_P4))
if (hw20k2_i2c_read(hw, CS4382_XC4, &cs_read.mix_control_P4))
continue;
if (I2CRead(hw, CS4382_VCA4, &cs4382_Read.dwVolControl_A4))
if (hw20k2_i2c_read(hw, CS4382_VCA4, &cs_read.vol_control_A4))
continue;
if (I2CRead(hw, CS4382_VCB4, &cs4382_Read.dwVolControl_B4))
if (hw20k2_i2c_read(hw, CS4382_VCB4, &cs_read.vol_control_B4))
continue;
if (memcmp(&cs4382_Read, &cs4382_Def,
sizeof(struct REGS_CS4382)))
if (memcmp(&cs_read, &cs_def, sizeof(cs_read)))
continue;
else
break;
......@@ -1657,29 +1665,29 @@ static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
/* Note: Every I2C write must have some delay.
* This is not a requirement but the delay works here... */
I2CWrite(hw, CS4382_MC1, 0x80);
I2CWrite(hw, CS4382_MC2, 0x10);
hw20k2_i2c_write(hw, CS4382_MC1, 0x80);
hw20k2_i2c_write(hw, CS4382_MC2, 0x10);
if (1 == info->msr) {
I2CWrite(hw, CS4382_XC1, 0x24);
I2CWrite(hw, CS4382_XC2, 0x24);
I2CWrite(hw, CS4382_XC3, 0x24);
I2CWrite(hw, CS4382_XC4, 0x24);
hw20k2_i2c_write(hw, CS4382_XC1, 0x24);
hw20k2_i2c_write(hw, CS4382_XC2, 0x24);
hw20k2_i2c_write(hw, CS4382_XC3, 0x24);
hw20k2_i2c_write(hw, CS4382_XC4, 0x24);
} else if (2 == info->msr) {
I2CWrite(hw, CS4382_XC1, 0x25);
I2CWrite(hw, CS4382_XC2, 0x25);
I2CWrite(hw, CS4382_XC3, 0x25);
I2CWrite(hw, CS4382_XC4, 0x25);
hw20k2_i2c_write(hw, CS4382_XC1, 0x25);
hw20k2_i2c_write(hw, CS4382_XC2, 0x25);
hw20k2_i2c_write(hw, CS4382_XC3, 0x25);
hw20k2_i2c_write(hw, CS4382_XC4, 0x25);
} else {
I2CWrite(hw, CS4382_XC1, 0x26);
I2CWrite(hw, CS4382_XC2, 0x26);
I2CWrite(hw, CS4382_XC3, 0x26);
I2CWrite(hw, CS4382_XC4, 0x26);
hw20k2_i2c_write(hw, CS4382_XC1, 0x26);
hw20k2_i2c_write(hw, CS4382_XC2, 0x26);
hw20k2_i2c_write(hw, CS4382_XC3, 0x26);
hw20k2_i2c_write(hw, CS4382_XC4, 0x26);
}
return 0;
End:
I2CUninit(hw);
hw20k2_i2c_uninit(hw);
return -1;
}
......@@ -1721,21 +1729,21 @@ static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
case ADC_MICIN:
data |= (0x1 << 14);
hw_write_20kx(hw, GPIO_DATA, data);
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
MAKE_WM8775_DATA(0x101)); /* Mic-in */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
break;
case ADC_LINEIN:
data &= ~(0x1 << 14);
hw_write_20kx(hw, GPIO_DATA, data);
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
MAKE_WM8775_DATA(0x102)); /* Line-in */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
MAKE_WM8775_DATA(0xCF)); /* No boost */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
MAKE_WM8775_DATA(0xCF)); /* No boost */
break;
default:
......@@ -1748,34 +1756,34 @@ static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
{
int err;
u32 dwMux = 2, dwData, dwCtl;
u32 mux = 2, data, ctl;
/* Set ADC reset bit as output */
dwData = hw_read_20kx(hw, GPIO_CTRL);
dwData |= (0x1 << 15);
hw_write_20kx(hw, GPIO_CTRL, dwData);
data = hw_read_20kx(hw, GPIO_CTRL);
data |= (0x1 << 15);
hw_write_20kx(hw, GPIO_CTRL, data);
/* Initialize I2C */
err = I2CInit(hw, 0x1A, 1, 1);
err = hw20k2_i2c_init(hw, 0x1A, 1, 1);
if (err < 0) {
printk(KERN_ALERT "ctxfi: Failure to acquire I2C!!!\n");
goto error;
}
/* Make ADC in normal operation */
dwData = hw_read_20kx(hw, GPIO_DATA);
dwData &= ~(0x1 << 15);
data = hw_read_20kx(hw, GPIO_DATA);
data &= ~(0x1 << 15);
mdelay(10);
dwData |= (0x1 << 15);
hw_write_20kx(hw, GPIO_DATA, dwData);
data |= (0x1 << 15);
hw_write_20kx(hw, GPIO_DATA, data);
mdelay(50);
/* Set the master mode (256fs) */
if (1 == info->msr) {
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02),
MAKE_WM8775_DATA(0x02));
} else if (2 == info->msr) {
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
MAKE_WM8775_DATA(0x0A));
} else {
printk(KERN_ALERT "ctxfi: Invalid master sampling "
......@@ -1785,35 +1793,35 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
}
/* Configure GPIO bit 14 change to line-in/mic-in */
dwCtl = hw_read_20kx(hw, GPIO_CTRL);
dwCtl |= 0x1<<14;
hw_write_20kx(hw, GPIO_CTRL, dwCtl);
ctl = hw_read_20kx(hw, GPIO_CTRL);
ctl |= 0x1 << 14;
hw_write_20kx(hw, GPIO_CTRL, ctl);
/* Check using Mic-in or Line-in */
dwData = hw_read_20kx(hw, GPIO_DATA);
data = hw_read_20kx(hw, GPIO_DATA);
if (dwMux == 1) {
if (mux == 1) {
/* Configures GPIO data to select Mic-in */
dwData |= 0x1<<14;
hw_write_20kx(hw, GPIO_DATA, dwData);
data |= 0x1 << 14;
hw_write_20kx(hw, GPIO_DATA, data);
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
MAKE_WM8775_DATA(0x101)); /* Mic-in */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
} else if (dwMux == 2) {
} else if (mux == 2) {
/* Configures GPIO data to select Line-in */
dwData &= ~(0x1<<14);
hw_write_20kx(hw, GPIO_DATA, dwData);
data &= ~(0x1 << 14);
hw_write_20kx(hw, GPIO_DATA, data);
/* Setup ADC */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
MAKE_WM8775_DATA(0x102)); /* Line-in */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
MAKE_WM8775_DATA(0xCF)); /* No boost */
I2CWrite(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
MAKE_WM8775_DATA(0xCF)); /* No boost */
} else {
printk(KERN_ALERT "ctxfi: ERROR!!! Invalid input mux!!!\n");
......@@ -1824,7 +1832,7 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
return 0;
error:
I2CUninit(hw);
hw20k2_i2c_uninit(hw);
return err;
}
......@@ -2106,15 +2114,15 @@ static struct hw ct20k2_preset __devinitdata = {
int __devinit create_20k2_hw_obj(struct hw **rhw)
{
struct hw *hw;
struct hw20k2 *hw20k2;
*rhw = NULL;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (NULL == hw)
hw20k2 = kzalloc(sizeof(*hw20k2), GFP_KERNEL);
if (!hw20k2)
return -ENOMEM;
*hw = ct20k2_preset;
*rhw = hw;
hw20k2->hw = ct20k2_preset;
*rhw = &hw20k2->hw;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment