Skip to content

L
linux-davinci
Commit c3570acb authored by Francois Romieu's avatar Francois Romieu Committed by Jeff Garzik
Browse files
Options

e1000: delete non NAPI code from the driver 

Compile-tested only.
Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 63cd31f6
Hide whitespace changes
Inline Side-by-side
Showing with 16 additions and 173 deletions
Documentation/networking/e1000.txt
View file @ c3570acb
......@@ -513,21 +513,11 @@ Additional Configurations
Intel(R) PRO/1000 PT Dual Port Server Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
NAPI
----
NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
or disabled based on the configuration of the kernel. To override
the default, use the following compile-time flags.
To enable NAPI, compile the driver module, passing in a configuration option:
make CFLAGS_EXTRA=-DE1000_NAPI install
To disable NAPI, compile the driver module, passing in a configuration option:
make CFLAGS_EXTRA=-DE1000_NO_NAPI install
NAPI (Rx polling mode) is enabled in the e1000 driver.
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
......
drivers/net/Kconfig
View file @ c3570acb
......@@ -1926,20 +1926,6 @@ config E1000
To compile this driver as a module, choose M here. The module
will be called e1000.
config E1000_NAPI
bool "Use Rx Polling (NAPI)"
depends on E1000
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config E1000_DISABLE_PACKET_SPLIT
bool "Disable Packet Split for PCI express adapters"
depends on E1000
......
drivers/net/e1000/e1000.h
View file @ c3570acb
......@@ -253,9 +253,7 @@ struct e1000_adapter {
u16 link_speed;
u16 link_duplex;
spinlock_t stats_lock;
#ifdef CONFIG_E1000_NAPI
spinlock_t tx_queue_lock;
#endif
unsigned int total_tx_bytes;
unsigned int total_tx_packets;
unsigned int total_rx_bytes;
......@@ -293,22 +291,16 @@ struct e1000_adapter {
bool detect_tx_hung;
/* RX */
#ifdef CONFIG_E1000_NAPI
bool (*clean_rx)(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
#else
bool (*clean_rx)(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring);
#endif
void (*alloc_rx_buf)(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int cleaned_count);
struct e1000_rx_ring *rx_ring; /* One per active queue */
#ifdef CONFIG_E1000_NAPI
struct napi_struct napi;
struct net_device *polling_netdev; /* One per active queue */
#endif
int num_tx_queues;
int num_rx_queues;
......
drivers/net/e1000/e1000_main.c
View file @ c3570acb
......@@ -31,12 +31,7 @@
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
#ifndef CONFIG_E1000_NAPI
#define DRIVERNAPI
#else
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
#define DRV_VERSION "7.3.20-k3-NAPI"
const char e1000_driver_version[] = DRV_VERSION;
static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
......@@ -138,7 +133,6 @@ static irqreturn_t e1000_intr(int irq, void *data);
static irqreturn_t e1000_intr_msi(int irq, void *data);
static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring);
#ifdef CONFIG_E1000_NAPI
static int e1000_clean(struct napi_struct *napi, int budget);
static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
......@@ -146,12 +140,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
#else
static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring);
static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring);
#endif
static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int cleaned_count);
......@@ -512,9 +500,8 @@ int e1000_up(struct e1000_adapter *adapter)
clear_bit(__E1000_DOWN, &adapter->flags);
#ifdef CONFIG_E1000_NAPI
napi_enable(&adapter->napi);
#endif
e1000_irq_enable(adapter);
/* fire a link change interrupt to start the watchdog */
......@@ -602,9 +589,8 @@ void e1000_down(struct e1000_adapter *adapter)
* reschedule our watchdog timer */
set_bit(__E1000_DOWN, &adapter->flags);
#ifdef CONFIG_E1000_NAPI
napi_disable(&adapter->napi);
#endif
e1000_irq_disable(adapter);
del_timer_sync(&adapter->tx_fifo_stall_timer);
......@@ -966,9 +952,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
e1000_set_ethtool_ops(netdev);
netdev->tx_timeout = &e1000_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
#ifdef CONFIG_E1000_NAPI
netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
#endif
netdev->vlan_rx_register = e1000_vlan_rx_register;
netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
......@@ -1207,16 +1191,12 @@ err_eeprom:
if (hw->flash_address)
iounmap(hw->flash_address);
err_flashmap:
#ifdef CONFIG_E1000_NAPI
for (i = 0; i < adapter->num_rx_queues; i++)
dev_put(&adapter->polling_netdev[i]);
#endif
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
#ifdef CONFIG_E1000_NAPI
kfree(adapter->polling_netdev);
#endif
err_sw_init:
iounmap(hw->hw_addr);
err_ioremap:
......@@ -1244,9 +1224,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
#ifdef CONFIG_E1000_NAPI
int i;
#endif
cancel_work_sync(&adapter->reset_task);
......@@ -1256,10 +1234,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
#ifdef CONFIG_E1000_NAPI
for (i = 0; i < adapter->num_rx_queues; i++)
dev_put(&adapter->polling_netdev[i]);
#endif
unregister_netdev(netdev);
......@@ -1268,9 +1244,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
#ifdef CONFIG_E1000_NAPI
kfree(adapter->polling_netdev);
#endif
iounmap(hw->hw_addr);
if (hw->flash_address)
......@@ -1296,9 +1270,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
#ifdef CONFIG_E1000_NAPI
int i;
#endif
/* PCI config space info */
......@@ -1356,14 +1328,12 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
return -ENOMEM;
}
#ifdef CONFIG_E1000_NAPI
for (i = 0; i < adapter->num_rx_queues; i++) {
adapter->polling_netdev[i].priv = adapter;
dev_hold(&adapter->polling_netdev[i]);
set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
}
spin_lock_init(&adapter->tx_queue_lock);
#endif
/* Explicitly disable IRQ since the NIC can be in any state. */
e1000_irq_disable(adapter);
......@@ -1398,7 +1368,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
return -ENOMEM;
}
#ifdef CONFIG_E1000_NAPI
adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
sizeof(struct net_device),
GFP_KERNEL);
......@@ -1407,7 +1376,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
kfree(adapter->rx_ring);
return -ENOMEM;
}
#endif
return E1000_SUCCESS;
}
......@@ -1472,9 +1440,7 @@ static int e1000_open(struct net_device *netdev)
/* From here on the code is the same as e1000_up() */
clear_bit(__E1000_DOWN, &adapter->flags);
#ifdef CONFIG_E1000_NAPI
napi_enable(&adapter->napi);
#endif
e1000_irq_enable(adapter);
......@@ -2069,11 +2035,9 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
ctrl_ext = er32(CTRL_EXT);
/* Reset delay timers after every interrupt */
ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
#ifdef CONFIG_E1000_NAPI
/* Auto-Mask interrupts upon ICR access */
ctrl_ext |= E1000_CTRL_EXT_IAME;
ew32(IAM, 0xffffffff);
#endif
ew32(CTRL_EXT, ctrl_ext);
E1000_WRITE_FLUSH();
}
......@@ -3777,9 +3741,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
#ifndef CONFIG_E1000_NAPI
int i;
#endif
u32 icr = er32(ICR);
/* in NAPI mode read ICR disables interrupts using IAM */
......@@ -3800,7 +3761,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
#ifdef CONFIG_E1000_NAPI
if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
......@@ -3809,20 +3769,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
__netif_rx_schedule(netdev, &adapter->napi);
} else
e1000_irq_enable(adapter);
#else
adapter->total_tx_bytes = 0;
adapter->total_rx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_packets = 0;
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
!e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
e1000_set_itr(adapter);
#endif
return IRQ_HANDLED;
}
......@@ -3839,13 +3785,10 @@ static irqreturn_t e1000_intr(int irq, void *data)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 rctl, icr = er32(ICR);
#ifndef CONFIG_E1000_NAPI
int i;
#endif
if (unlikely(!icr))
return IRQ_NONE; /* Not our interrupt */
#ifdef CONFIG_E1000_NAPI
/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
* not set, then the adapter didn't send an interrupt */
if (unlikely(hw->mac_type >= e1000_82571 &&
......@@ -3854,7 +3797,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
* need for the IMC write */
#endif
if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
hw->get_link_status = 1;
......@@ -3874,7 +3816,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
#ifdef CONFIG_E1000_NAPI
if (unlikely(hw->mac_type < e1000_82571)) {
/* disable interrupts, without the synchronize_irq bit */
ew32(IMC, ~0);
......@@ -3890,46 +3831,14 @@ static irqreturn_t e1000_intr(int irq, void *data)
/* this really should not happen! if it does it is basically a
* bug, but not a hard error, so enable ints and continue */
e1000_irq_enable(adapter);
#else
/* Writing IMC and IMS is needed for 82547.
* Due to Hub Link bus being occupied, an interrupt
* de-assertion message is not able to be sent.
* When an interrupt assertion message is generated later,
* two messages are re-ordered and sent out.
* That causes APIC to think 82547 is in de-assertion
* state, while 82547 is in assertion state, resulting
* in dead lock. Writing IMC forces 82547 into
* de-assertion state.
*/
if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
ew32(IMC, ~0);
adapter->total_tx_bytes = 0;
adapter->total_rx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_packets = 0;
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
!e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
e1000_set_itr(adapter);
if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
e1000_irq_enable(adapter);
#endif
return IRQ_HANDLED;
}
#ifdef CONFIG_E1000_NAPI
/**
* e1000_clean - NAPI Rx polling callback
* @adapter: board private structure
**/
static int e1000_clean(struct napi_struct *napi, int budget)
{
struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
......@@ -3966,12 +3875,10 @@ static int e1000_clean(struct napi_struct *napi, int budget)
return work_done;
}
#endif
/**
* e1000_clean_tx_irq - Reclaim resources after transmit completes
* @adapter: board private structure
**/
static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring)
{
......@@ -3980,9 +3887,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_desc *tx_desc, *eop_desc;
struct e1000_buffer *buffer_info;
unsigned int i, eop;
#ifdef CONFIG_E1000_NAPI
unsigned int count = 0;
#endif
bool cleaned = false;
unsigned int total_tx_bytes=0, total_tx_packets=0;
......@@ -4014,11 +3919,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
#ifdef CONFIG_E1000_NAPI
#define E1000_TX_WEIGHT 64
/* weight of a sort for tx, to avoid endless transmit cleanup */
if (count++ == E1000_TX_WEIGHT) break;
#endif
if (count++ == E1000_TX_WEIGHT)
break;
}
tx_ring->next_to_clean = i;
......@@ -4131,14 +4035,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
* e1000_clean_rx_irq - Send received data up the network stack; legacy
* @adapter: board private structure
**/
#ifdef CONFIG_E1000_NAPI
static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do)
#else
static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring)
#endif
{
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
......@@ -4161,11 +4060,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct sk_buff *skb;
u8 status;
#ifdef CONFIG_E1000_NAPI
if (*work_done >= work_to_do)
break;
(*work_done)++;
#endif
status = rx_desc->status;
skb = buffer_info->skb;
buffer_info->skb = NULL;
......@@ -4251,7 +4149,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
le16_to_cpu(rx_desc->csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
#ifdef CONFIG_E1000_NAPI
if (unlikely(adapter->vlgrp &&
(status & E1000_RXD_STAT_VP))) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
......@@ -4259,15 +4157,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
} else {
netif_receive_skb(skb);
}
#else /* CONFIG_E1000_NAPI */
if (unlikely(adapter->vlgrp &&
(status & E1000_RXD_STAT_VP))) {
vlan_hwaccel_rx(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->special));
} else {
netif_rx(skb);
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
next_desc:
......@@ -4301,14 +4191,9 @@ next_desc:
* @adapter: board private structure
**/
#ifdef CONFIG_E1000_NAPI
static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do)
#else
static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring)
#endif
{
union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
struct net_device *netdev = adapter->netdev;
......@@ -4331,11 +4216,11 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
while (staterr & E1000_RXD_STAT_DD) {
ps_page = &rx_ring->ps_page[i];
ps_page_dma = &rx_ring->ps_page_dma[i];
#ifdef CONFIG_E1000_NAPI
if (unlikely(*work_done >= work_to_do))
break;
(*work_done)++;
#endif
skb = buffer_info->skb;
/* in the packet split case this is header only */
......@@ -4437,21 +4322,14 @@ copydone:
if (likely(rx_desc->wb.upper.header_status &
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
adapter->rx_hdr_split++;
#ifdef CONFIG_E1000_NAPI
if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->wb.middle.vlan));
} else {
netif_receive_skb(skb);
}
#else /* CONFIG_E1000_NAPI */
if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
vlan_hwaccel_rx(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->wb.middle.vlan));
} else {
netif_rx(skb);
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
next_desc:
......@@ -5218,9 +5096,6 @@ static void e1000_netpoll(struct net_device *netdev)
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev);
#ifndef CONFIG_E1000_NAPI
adapter->clean_rx(adapter, adapter->rx_ring);
#endif
enable_irq(adapter->pdev->irq);
}
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment